Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Stress Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Delamination and debonding of materials

The general topics consist of stress analysis, mechanical behavior, and fractography/NDI of composite laminates. Papers are presented on a dynamic hybrid finite-element analysis for interfacial cracks in composites, energy release rate during delamination crack growth in composite laminates, matrix deformation and fracture in graphite-reinforced epoxies, and the role of delamination and damage development on the strength of thick notched laminates. In addition, consideration is given to a new ply model for interlaminar stress analysis, a fracture mechanics approach for designing adhesively bonded joints, the analysis of local delaminations and their influence on composite laminate behavior, and moisture and temperature effects on the mixed-mode delamination fracture of unidirectional graphite/epoxy.

Johnson, W. S.↗
NASA NTRS1984

Angular momentum transfer by gravitational torques and the evolution of binary protostars

The efficiency of angular momentum transport by gravitational torques is investigated semianalytically for two idealized models. The first model, a rotating ellipsoid embedded within another ellipsoid, is compared with numerical results for the fission instability of a radpidly-rotating polytrope. The fission instability is aborted by the rapid transfer of angular momentum outward by gravitational torques. The global rates of angular momentum transfer by gravitational torques in rotating gas clouds such as the presolar nebula are shown to be comparable to the rates assumed to be appropriate for transfer by turbulent stresses. The second model is a binary system embedded within a rotating ellipsoid. The binary orbital angular momentum decreases significantly when the phase angle with the ellipsoid is constant; the binary separation may then decrease by a factor of 100 within about an orbital period. For a variable phase angle, little secular loss of orbital angular momentum occurs. Binaries which form in the isothermal regime of the theory of hierarchical fragmentation will not undergo orbital decay, whereas very close binaries composed of nonisothermal fragments may decay and merge into single objects.

Boss, A. P.↗
NASA NTRS2021

Modeling Laminar-to-Turbulent Transition in the Panel Test Facility Arcjet

A computational fluid dynamics (CFD) laminar-to-turbulence transition model was developed for the NASA Ames Research Center’s 20 MW Panel Test Facility (PTF). Surface pressure, heat flux to a water-cooled plate, and surface temperature on a tile plate coated with reaction-cured glass were measured across several conditions in the facility and compared with laminar and fully-turbulent CFD simulations. The potential for bypass transition in the PTF nozzle was assessed via application of the Langtry-Menter four-equation transitional shear-stress transport (SST) model. Results from the transition model were inconsistent with measurements. Flow interaction with a boundary conditioning plate feature inside the nozzle was also investigated as a potential source of laminar-to-turbulent transition using two turbulence models with specified transition locations. The Baldwin-Lomax turbulence model was configured to simulate a transition at the upstream edge of the boundary conditioning plate and produced results consistent with the surface pressure measurements but not the cold-wall heat flux. Finally, the SST turbulence model was calibrated to transition at the upstream edge of the boundary conditioning plate and produced results consistent with both the surface pressure and cold-wall heat flux measurements. The SST-based model demonstrated reasonable agreement with surface temperature measurements on the reaction-cured glass tile, albeit with some discrepancies.

Computational Fluid Dynamics↗
NASA NTRS1993

A Simplistic Look at Limit Stresses from Random Loading

Utilizing a continuous beam model, this report compares the potential stresses imposed on the beam from a random environment with those resulting from a typical static load analysis or test simulation. The Miles' equation used to develop peak response accelerations is shown to become a force equation in the hands of strength assessment personnel. This may prove to be unrealistic since hardware dynamic stresses are related to deflection rather than load. Correlation of the stress state for any static analysis or test with the actual dynamic response stress is strictly dependent upon how well the static deflections simulate the predominant dynamic mode shape. The report proposes that the general shape of this predominant mode, along with the peak response accelerations of major masses be used in strength assessments. From these data, a tailored enforced displacement loading may prove to be more effective in reproducing random induced stresses on flight hardware.

Lee, H. M.↗
NASA NTRS2018

Neutrophil to Lymphocyte Ratio: A Prognostic Indicator for Astronaut Health

Short-term and long-term spaceflight missions can cause immune system dysfunction in astronauts. Recent studies indicate elevated white blood cells (WBC) and polymorphonuclear neutrophils (PMN) in astronaut blood, along with unchanged or reduced lymphocyte counts, and reduced T cell function, during short-(days) and long-(months) term spaceflight. A high PMN to lymphocyte ratio (NLR) can acts as a strong predictor of poor prognosis in cancer, and as a biomarker for subclinical inflammation in humans and chronic stress in mouse models, however, the NLR has not yet been identified as a predictor of astronaut health during spaceflight. For this, complete blood cell count data collected from astronauts and rodents that have flown for short- and long-term missions on board the International Space Station (ISS) was repurposed to determine the NLR pre-, in-, and post-flight. The results displayed that the NLR progressively increased during spaceflight in both human and mice, while a spike in the NLR was observed at post-flight landing, suggesting stress-induced factors may be involved. In addition, the ground-based chronic microgravity analog, hindlimb unloading in mice, indicated an increased NLR, along with induced myeloperoxidase expression, as measured by quantitative (q)PCR. The mechanism for increased NLR was further assessed in vitro using the NASA-developed rotating wall vessel (RWV) cell culture suspension system with human WBCs. The results indicated that simulated microgravity led to increased mature PMN counts, NLR profiles, and production of reactive oxygen species (ROS). Collectively, these studies show that an increased NLR is observed in spaceflight missions, and in chronic microgravity-analog simulation in mice, and that this effect may be potentiated by the oxidative stress response in blood cells under microgravity conditions. Furthermore, these results suggest that a disrupted NLR profile in spaceflight may further disrupt immune homeostasis, potentially causing chronic immune-mediated inflammatory diseases. Thus, we propose that the health status of astronauts during short- and long-term space missions can be monitored by their NLR profile, in addition to utilizing this measurement as a tool for interventions and countermeasure development to restore homeostatic immunity.

biomarker↗
NASA NTRS1982

Fracture and crack growth in orthotropic laminates. Part 2: Experimental determination of internal damage growth in unidirectional boron/aluminum composite laminates

The fracture behavior of unidirectional boron/aluminum composite laminates is investigated in order to verify the results of mathematical models. These models predict the stresses and displacements of fibers and the amount of damage growth in a center-notched lamina as a function of the applied remote stress and the matrix and fiber material properties. The damage may take the form of longitudinal yielding and splitting in the matrix as well as stable transverse damage consisting of broken fibers and matrix yielding ahead of the notch. A brittle lacquer coating is used to detect the yielding in the matrix while X-ray techniques are used to detemine the number of broken fibers in the laminate. The notched strengths and the amounts of damage found in the experimental specimens agree well with those predicted by the mathematical model.

Goree, J. G.↗
NASA NTRS1979

Evaluation of subgrid-scale models using an accurately simulated turbulent flow

A calculation of periodic homogeneous isotropic turbulence is used to simulate the experimental decay of grid turbulence. The calculation is found to match the experiment in a number of important aspects and the computed flow field is then treated as a realization of a physical turbulent flow. From this flow, a calculation is conducted of the large eddy field and the various averages of the subgrid-scale turbulence that occur in the large eddy simulation equations. These quantities are compared with the predictions of the models that are usually applied in large eddy simulation. The results show that the terms which involve the large-scale field are accurately modeled but the subgrid-scale Reynolds stresses are only moderately well modeled. It is also possible to use the method to predict the constants of the models without reference to experiment. Attempts to find improved models have not met with success.

Clark, R. A.↗
NASA NTRS1991

Micro-mechanical analysis of damage growth and fracture in discontinuous fiber reinforced metal matrix composites

An experimental verification is presented for a new two parameter fracture model based on the equivalent remote biaxial stresses (ERBS). A detailed comparison is made between the new theory and the constant K(sub IC) approach of linear elastic fracture mechanics (LEFM). Fracture is predicted through a failure curve representing the change in a variable fracture toughness K(sub IC) with the ERBS ratio B(sub E). The nonsingular term (T) in the series expansion of the near crack-tip transverse stress is included in the model. Experimental results for polymethyl methacrylate (PPMA) show that the theory can account for the effects of geometry on fracture toughness as well as indicate the initiation of crack branching. It is shown that the new criterion predicts failure for PMMA with a 95 percent confidence zone which is nearly three times smaller than that of the LEFM K(sub IC) approach.

Goree, James G.↗
NASA NTRS1985

Low-angle normal faults-low differential stress at mid crustal levels

A simple model for frictional slip on pre-existing faults that considers the local stress state near the fault and the effect of non-hydrostatic fluid pressures predicts that low-angle normal faulting is restricted to areas of the crust characterized by low differential stress and nearly lithostatic fluid pressures. The model considers frictional slip on a cohesionless low-angle normal fault governed by the failure criterion tau = mu sub f (sigma (*) sub n) =mu sub f (sigma sub n - P sub f) where tau and sigma sub n are the shear and normal stresses across the fault plane, mu sub f is the static coefficient of friction, and P sub f is the pore fluid pressure. As a first approximation, the model considers a vertical greatest principal compressive stress, sigma sub 1. It is apparent that if slip on low-angle normal faults is governed by the avove frictional failure criterion, slip on the low-angle normal fault occurs only if the least effective principal stress, sigma (*) sub 3 = sigma sub 3 - P sub f, is tensile, whenever tan superscrip -1(mu sub f d, where d is the dip of the fault. If detachment faulting occurs at any significant depth in the crust, P sub f sigma sub 3 is required. In light of this conclusion I allow P sub f to vary as necessary to allow slip on the low-angle normal fault.

Power, W. L.↗
NASA NTRS1997

Structure-Property Relationships of Bismaleimides

The purpose of this research was to control and systematically vary the network topology of bismaleimides through cure temperature and chemistry (addition of various coreactants) and subsequently attempt to determine structure-mechanical property relationships. Characterization of the bismaleimide structures by dielectric, rheological, and thermal analyses, and density measurements was subsequently correlated with mechanical properties such as modulus, yield strength, fracture energy, and stress relaxation. The model material used in this investigation was 4,4'-BismaleiMidodIphenyl methane (BMI). BMI was coreacted with either 4,4'-Methylene Dianiline (MDA), o,o'-diallyl bisphenol A (DABA) from Ciba Geigy, or Diamino Diphenyl Sulfone (DDS). Three cure paths were employed: a low- temperature cure of 140 C where chain extension should predominate, a high-temperature cure of 220 C where both chain extension and crosslinking should occur simultaneously, and a low-temperature (140 C) cure followed immediately by a high-temperature (220 C) cure where the chain extension reaction or amine addition precedes BMI homopolymerization or crosslinking. Samples of cured and postcured PMR-15 were also tested to determine the effects of postcuring on the mechanical properties. The low-temperature cure condition of BMI/MDA exhibited the highest modulus values for a given mole fraction of BMI with the modulus decreasing with decreasing concentration of BMI. The higher elastic modulus is the result of steric hindrance by unreacted BMI molecules in the glassy state. The moduli values for the high- and low/high-temperature cure conditions of BMI/MDA decreased as the amount of diamine increased. All the moduli values mimic the yield strength and density trends. For the high-temperature cure condition, the room- temperature modulus remained constant with decreasing mole fraction of BMT for the BMI/DABA and BMI/DDS systems. Postcuring PMR-15 increases the modulus over that of the cured material even though density values of cured and postcured PMR were essentially the same. Preliminary results of a continuous and intermittent stress relaxation experiment for BMI:MDA in a 2:1 molar ratio indicate that crosslinking is occurring when the sample is in the undeformed state. Computer simulation of properties such as density, glass transition temperature, and modulus for the low- temperature cure conditions of BMI/MDA and BMI/DABA were completed. The computer modeling was used to help further understand and confirm the structure characterization results. The simulations correctly predicted the trends of these properties versus mole fraction BMI and were extended to other BMI/diamine systems.

Tenteris-Noebe, Anita D.↗
NASA NTRS1992

Free-edge effects in laminates under extension, bending and twisting. II - Sublaminate/layer modeling and analysis

The stress-function-based variational method of Yin (1991) is extended and modified into a combined layer/sublaminate approach applicable to a laminated strip composed of a large number of differently orientated, anisotropic elastic plies. Lekhnitskii's (1963) stress functions are introduced into two interior layers adjacent to a particular interface. The remaining layers are grouped into an upper sublaminate and a lower sublaminate. The stress functions are expanded in truncated power series of the thickness coordinate, and the differential equations governing the coefficient functions are derived by using the complementary virtual work principle. The layer/sublaminate approach limits the dimension of the eigenvalue problem to a fixed number irrespective of the number of layers in the sublaminate, so that reasonably accurate solutions of the interlaminar stresses can be computed with extreme ease. For symmetric, four-layer, angle-ply and cross-ply laminates, a comparison of the previous analysis results based on the pure layer model and new results based on two different layer/sublaminate models indicates reasonable over-all agreement in the interlaminar stresses and superior agreement in the total peeling and shearing force.

Yin, Wan-Lee↗
NASA NTRS1987

Thermal expansion mismatch and plasticity in thermal barrier coating

The basic objective of this investigation is the quantitative determination of stress states in a model thermal barrier coating (TBC) as it cools in the air to 600 C from an assumed stress-free state at 700 C. This model is intended to represent a thin plasma-sprayed zirconia-yttria ceramic layer with a nickel chromium-aluminum-yttrium bond coat on a cylindrical substrate made of nickel-based superalloys typically found in gas turbines.

Chang, George C.↗
NASA NTRS2002

Two Surface Temperature Retrieval Methods Compared Over Agricultural Lands

Accurate, spatially distributed surface temperatures are required for modeling evapotranspiration (ET) over agricultural fields under wide ranging conditions, including stressed and unstressed vegetation. Modeling approaches that use surface temperature observations, however, have the burden of estimating surface emissivities. Emissivity estimation, the subject of much recent research, is facilitated by observations in multiple thermal infrared bands. But it is nevertheless a difficult task. Using observations from a multiband thermal sensor, the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER), estimated surface emissivities and temperatures are retrieved in two different ways: the temperature emissivity separation approach (TES) and the normalized emissivity approach (NEM). Both rely upon empirical relationships, but the assumed relationships are different. TES relies upon a relationship between the minimum spectral emissivity and the range of observed emissivities. NEM relies upon an assumption that at least one thermal band has a pre-determined emissivity (close to 1.0). The benefits and consequences of each approach will be demonstrated for two different landscapes: one in central Oklahoma, USA and another in southern New Mexico.

French, Andrew N.↗
NASA NTRS1986

A finite element overlay technique for modeling pinned composite joints

A finite element technique using overlaid plane stress elements is presented for modeling a pinned composite joint. The technique allows for discrete modeling of the pin and web regions of the joint in a two-dimensional (2-D) finite element analysis. Thus, predictive capability is substantially increased without the added complexity of a three-dimensional (3-D) analysis. The overlay technique requires a thorough evaluation of the model constraints between the joint components. Bearing panels are used to account for a reduced compressive modulus under bearing loads. Application of the plane stress overlay technique to the Filament Wound Case (FWC) Program is discussed. The experimental approach to determine bearing panel moduli using a double lap shear test is detailed, and finite element results are correlated with full-scale FWC joint test results.

Colvin, G. E.↗
NASA NTRS2002

Generalized Reliability Methodology Applied to Brittle Anisotropic Single Crystals

A generalized reliability model was developed for use in the design of structural components made from brittle, homogeneous anisotropic materials such as single crystals. The model is based on the Weibull distribution and incorporates a variable strength distribution and any equivalent stress failure criteria. In addition to the reliability model, an energy based failure criterion for elastically anisotropic materials was formulated. The model is different from typical Weibull-based models in that it accounts for strength anisotropy arising from fracture toughness anisotropy and thereby allows for strength and reliability predictions of brittle, anisotropic single crystals subjected to multiaxial stresses. The model is also applicable to elastically isotropic materials exhibiting strength anisotropy due to an anisotropic distribution of flaws. In order to develop and experimentally verify the model, the uniaxial and biaxial strengths of a single crystal nickel aluminide were measured. The uniaxial strengths of the <100> and <110> crystal directions were measured in three and four-point flexure. The biaxial strength was measured by subjecting <100> plates to a uniform pressure in a test apparatus that was developed and experimentally verified. The biaxial strengths of the single crystal plates were estimated by extending and verifying the displacement solution for a circular, anisotropic plate to the case of a variable radius and thickness. The best correlation between the experimental strength data and the model predictions occurred when an anisotropic stress analysis was combined with the normal stress criterion and the strength parameters associated with the <110> crystal direction.

Salem, Jonathan A.↗
NASA NTRS2008

Analysis of Bonded Joints Between the Facesheet and Flange of Corrugated Composite Panels

This paper outlines a method for the stress analysis of bonded composite corrugated panel facesheet to flange joints. The method relies on the existing HyperSizer Joints software, which analyzes the bonded joint, along with a beam analogy model that provides the necessary boundary loading conditions to the joint analysis. The method is capable of predicting the full multiaxial stress and strain fields within the flange to facesheet joint and thus can determine ply-level margins and evaluate delamination. Results comparing the method to NASTRAN finite element model stress fields are provided illustrating the accuracy of the method.

Yarrington, Phillip W.↗
NASA NTRS1979

Postseismic viscoelastic surface deformation and stress. Part 1: Theoretical considerations, displacement and strain calculations

A model of viscoelastic deformations associated with earthquakes is presented. A strike-slip fault is represented by a rectangular dislocation in a viscoelastic layer (lithosphere) lying over a viscoelastic half-space (asthenosphere). Deformations occur on three time scales. The initial response is governed by the instantaneous elastic properties of the earth. A slower response is associated with viscoelastic relaxation of the lithosphere and a yet slower response is due to viscoelastic relaxation of the asthenosphere. The major conceptual contribution is the inclusion of lithospheric viscoelastic properties into a dislocation model of earthquake related deformations and stresses. Numerical calculations using typical fault parameters reveal that the postseismic displacements and strains are small compared to the coseismic ones near the fault, but become significant further away. Moreover, the directional sense of the deformations attributable to the elastic response, the lithospheric viscoelastic softening, and the asthenospheric viscoelastic flow may differ and depend on location and model details. The results and theoretical arguments suggest that the stress changes accompanying lithospheric relaxation may also be in a different sense than and be larger than the strain changes.

Cohen, S. C.↗