SEARCH · Engineering Papers

Results for “Solid Works”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

All sources NASA NTRS DOE OSTI

NASA NTRS1993

PEM regenerative fuel cells

This paper will update the progress in developing electrocatalyst systems and electrode structures primarily for the positive electrode of single-unit solid polymer proton exchange membrane (PEM) regenerative fuel cells. The work was done with DuPont Nafion 117 in complete fuel cells (40 sq cm electrodes). The cells were operated alternately in fuel cell mode and electrolysis mode at 80 C. In fuel cell mode, humidified hydrogen and oxygen were supplied at 207 kPa (30 psi); in electrolysis mode, water was pumped over the positive electrode and the gases were evolved at ambient pressure. Cycling data will be presented for Pt-Ir catalysts and limited bifunctional data will be presented for Pt, Ir, Ru, Rh, and Na(x)Pt3O4 catalysts as well as for electrode structure variations.

Swette, Larry L.↗

NASA NTRS1994

NASA satellite communications application research, phase 2 addendum. Efficient high power, solid state amplifier for EHF communications

This document is an addendum to the NASA Satellite Communications Application Research (SCAR) Phase 2 Final Report, 'Efficient High Power, Solid State Amplifier for EHF Communications.' This report describes the work performed from 1 August 1993 to 11 March 1994, under contract number NASW-4513. During this reporting period an array of transistor amplifiers was repaired by replacing all MMIC amplifier chips. The amplifier array was then tested using three different feedhorn configurations. Descriptions, procedures, and results of this testing are presented in this report, and conclusions are drawn based on the test results obtained.

Benet, James↗

NASA NTRS2002

Towards Arbitrary Accuracy Inviscid Surface Boundary Conditions

Inviscid nonlinear surface boundary conditions are currently limited to third order accuracy in time for non-moving surfaces and actually reduce to first order in time when the surfaces move. For steady-state calculations it may be possible to achieve higher accuracy in space, but high accuracy in time is required for efficient simulation of multiscale unsteady phenomena. A surprisingly simple technique is shown here that can be used to correct the normal pressure derivatives of the flow at a surface on a Cartesian grid so that arbitrarily high order time accuracy is achieved in idealized cases. This work demonstrates that nonlinear high order time accuracy at a solid surface is possible and desirable, but it also shows that the current practice of only correcting the pressure is inadequate.

Dyson, Rodger W.↗

NASA NTRS2003

Modeling of Iron K Lines: Radiative and Auger Decay Data for Fe II-Fe IX

A detailed analysis of the radiative and Auger de-excitation channels of K-shell vacancy states in Fe II-Fe IX has been carried out. Level energies, wavelengths, A-values, Auger rates and fluorescence yields have been calculated for the lowest fine-structure levels populated by photoionization of the ground state of the parent ion. Different branching ratios, namely K alpha 2/K alpha 1, K beta/K alpha, KLM/KLL, KMM/KLL, and the total K-shell fluorescence yields, omega(sub k), obtained in the present work have been compared with other theoretical data and solid-state measurements, finding good general agreement with the latter. The Kalpha 2/K alpha l ratio is found to be sensitive to the excitation mechanism. From these comparisons it has been possible to estimate an accuracy of approx.10% for the present transition probabilities.

Palmeri, P.↗

NASA NTRS2004

Shock Heating: Effects on Chondritic Material

At the 1994 Conference on Chondrules and the Protoplanetary Disk, shock waves were discussed as mechanisms that may have been responsible for forming chondrules, millimeter-sized igneous spheres which are significant components of chondritic meteorites, and references therein]. At the time, shock waves were appealing because they were thought to be brief, repetitive events that were quantitatively shown to be able to rapidly heat silicates to the appropriate temperatures for chondrule formation. Since that meeting, more detailed models for the thermal processing of material in shock waves have been developed. These models have tracked the thermal evolution of the silicates for longer periods of time and found that their cooling rates are also consistent with what has been inferred for chondrules. In addition to the thermal histories of these particles, shock waves may be able to explain a number of other features observed in primitive meteorites. Here, we review the recent work that has been done in studying the interaction of solids with shock waves in the solar nebula.

Desch, S. J.↗

NASA NTRS2006

Alpha-Voltaic Sources Using Liquid Ga as Conversion Medium

A family of proposed miniature sources of power would exploit the direct conversion of the kinetic energy of alpha particles into electricity. In addition to having long operational lives, these sources are expected to operate with energy-conversion efficiencies from 70 to 90 percent. A power source as proposed (see figure) would be an electrolytic cell in which liquid gallium would serve as both an electrolyte and an energy-conversion medium. The cell would contain an iridium cathode and a zirconium anode. The alpha particles, each with a kinetic energy approx.5.8 MeV, would be emitted by radioactive decay of Cm-244, which has a half-life of 18 years. The Cm-244 source would be positioned so that the a particles would enter the liquid gallium, where their kinetic energy would be dissipated mostly through ionization of Ga atoms, creating Ga(+) ions and free electrons. The electrons would be collected by iridium cathode, and the Ga(+) ions would be neutralized at the zirconium cathode by electrons returning after flowing through an external circuit. Gallium is a candidate for use as the electrolyte and the energy-conversion medium because in the liquid state it is a semimetal: its electrical conductivity is greater than that of a typical semiconductor but small in comparison with the conductivities of metals. Consequently, in liquid gallium, electrons and Ga(+) can exist without immediate recombination and can be moved by electric fields. It is expected that electric fields, resulting at least partly from the difference between the work functions of the electrode metals, would move the electrons and ions to their respective electrodes. The open-circuit potential of the cell is expected to be 1.62 V - equal to the difference between the work functions of iridium and zirconium. Unlike in a solid-state energy conversion medium, the impingement of energetic a particles would not give rise to displacement damage in the liquid gallium. Hence, the cell should have a long life, limited only by the half-life of Cm-244. A cell having a volume less than 25 cu mm, containing 1 curie of Cm-244 (the curie is a unit of radioactivity equal to 3.7 10(exp 10) disintegrations per second) is expected to deliver a current between 7 and 12 mA, which, at the expected open-circuit potential, would provide a power in the approximate range of 11 to 20 mW.

Patel, Jagdish U.↗

NASA NTRS2013

Possible Detection of Nitrates on Mars by the Sample Analysis at Mars (SAM) Instrument

Planetary models suggest that nitrogen was abundant in the early Martian atmosphere as dinitrogen (N2). However, it has been lost by sputtering and photochemical loss to space [1, 2], impact erosion [3], and chemical oxidation to nitrates [4]. Nitrates, produced early in Mars history, are later decomposed back into N2 by the current impact flux [5], making possible a nitrogen cycle on Mars. It is estimated that a layer of about 3 m of pure NaNO3 should be distributed globally on Mars [5]. Nitrates are a fundamental source for nitrogen to terrestrial microorganisms. Therefore, the detection of soil nitrates is important to assess habitability in the Martian environment. The only previous mission that was designed to search for soil nitrates was the Phoenix mission but was unable to detect evolved N-containing species by TEGA and the MECA WCL [6]. Nitrates have been tentatively identified in the Nakhla meteorite [7]. The purpose of this work is to determine if nitrates were detected in first solid sample (Rocknest) in Gale Crater examined by the SAM instrument.

Navarro-Gonzalez, R.↗

NASA NTRS2023

Can the Streaming Instability Form the First Planetesimals in Globally Turbulent Protoplanetary Disks?

Understanding the formation of the first planetesimals remains key to deciphering the history of planet formation within our own solar system and beyond. Evidence from the vast meteorite record [e.g., 1] as well as observations [e.g., 2] strongly suggest that the first planetesimals, and perhaps giant planet core accretion occurred well within the first million years of disk evolution. Moreover, chemical and lithological mixing as well as observations of line-broadening in protoplanetary disks (PPDs) [e.g., 3-6] suggest that the solar system nebula in this epoch was weakly-to-moderately turbulent in the regions where particle growth is of the greatest interest [7-8]. It is a well-known though that global hydrodynamic turbulence complicates particle growth due to a slew of barriers that can slow or even stall particle or aggregate growth at pebble sizes (with corresponding small particle Stokes numbers St) that can lead to loss to the central star via radial drift before planetesimals can ever form [9,10], requiring that some other mechanism come into play that collects growth-frustrated pebbles into gravitationally bound multi-km bodies – objects that are “born big” [11]. The current leading candidate for such a “leap-frog” mechanism is the so-called Streaming Instability (SI), a gas-drag mediated momentum exchange resonance in which the relative velocity between the particle component and a rotating gaseous fluid can lead to high densities in the particle field [12], which has been invoked in a number of recent PPD models that include a turbulent intensity α [e.g., 13-14] as the defacto mechanism for planetesimal formation if conditions for the SI (depending on particle St and the solids-to-gas mass ratio) are satisfied. However, these previous works use conditions established from occurrence studies for the onset of SI in laminar disks [15-17] in which the only source of turbulence is that self-generated by the settling particle layer, and not externally driven global turbulence. Recent analytical theories of the SI subject to global turbulence predict much more stringent conditions for the effectiveness of the SI than the laminar case [18-19]. Thus, whether the efficient operation of the SI can be attained in realistic models of the solar nebula have yet to be established. In this work, we ask whether the conditions under which the SI can produce gravitationally bound particle overdensities can actually be met in the first million years of evolution in globally turbulent PPDs.

P R Estrada↗

NASA NTRS2024

Preventing Camera Clipping Through Varied Terrain and Other Planetary Objects

Within the scope of computer visualization systems and technologies, camera objects allow users to navigate three-dimensional (3D) scenes much like a person would navigate the real world. As such, when one seeks to model a scene or environment based on real-world laws, the camera must often follow these same conventions. Accomplishing this in the world of computer renderings presents unique challenges for defining space, spatial relations, depth, distance, and height. Therefore, movement for a camera must be specifically designated and processed by the program in order to achieve accurate movement representations. Although this thought process involves each aspect of camera movement, one specific aspect of camera movement is the primary focus of this report: ensuring that the camera does not clip through an object and appear subsurface. This is important to mimic real-world movements because people in the real world would not go beneath the solid-surface terrain unless they intended to do so. By working with numerical definitions, equations, and variables, a computer can relate an object to its existence in space. Thus, such challenges in camera movements with computationally rendered 3D spaces can be mitigated.

Kristie O'Brien↗

NASA NTRS1996

Fundamental Phenomena on Fuel Decomposition and Boundary-Layer Combustion Precesses with Applications to Hybrid Rocket Motors: Experimental Investigation - Part 1

This final report summarizes the major findings on the subject of 'Fundamental Phenomena on Fuel Decomposition and Boundary-Layer Combustion Processes with Applications to Hybrid Rocket Motors', performed from 1 April 1994 to 30 June 1996. Both experimental results from Task 1 and theoretical/numerical results from Task 2 are reported here in two parts. Part 1 covers the experimental work performed and describes the test facility setup, data reduction techniques employed, and results of the test firings, including effects of operating conditions and fuel additives on solid fuel regression rate and thermal profiles of the condensed phase. Part 2 concerns the theoretical/numerical work. It covers physical modeling of the combustion processes including gas/surface coupling, and radiation effect on regression rate. The numerical solution of the flowfield structure and condensed phase regression behavior are presented. Experimental data from the test firings were used for numerical model validation.

Kuo, Kenneth K.↗

DOE OSTI2022

Chemistry, Structure, and Function of Lone Pairs in Extended Solids

The lone pair has been a known feature of the electronic structure of molecules for over 100 years. Beginning with the pioneering work of Lewis and others that was later developed into useful guidelines for predicting molecular structure, lone pairs and their steric consequences are now taught at the very earliest stages of a chemistry education. In the crystalline solid state, lone pairs have perhaps had a less visible yet equally consequential role, with a significant impact on a range of properties and functionalities. Important properties associated with s 2 electron-derived lone pairs include their role in creating conditions favorable for ion transport, in the formation and correlation of local dipoles and the resulting polar behavior leading to ferroics and multiferroics, in increasing the refractive index of glass, in reducing the thermal conductivity of thermoelectric materials, and in breaking local symmetry permitting second-harmonic light generation.. In recent years, the role of the lone pair in developing the electronic structure of some topological quantum materials has also been recognized. While structural distortions due to lone pairs have traditionally been characterized through their crystallography, recent advances in scattering and spectroscopy have revealed the presence of local lone pair-driven distortions that do not correlate over long length scales. The role of these crystallographically “hidden” lone pairs, their detection, and their impact on properties have become a growing body of work in the literature. Hidden lone pairs are an effective argument for considering a role for lone pairs that goes beyond their being objects that occupy space in the coordination polyhedra of cations. This Account introduces the chemistry of lone pairs in extended crystalline solids, including a discussion of when they are stereochemically active, how they manifest in the structure, and how their chemistry can be tuned by the chemical environment around them. Eventually, all of these factors work in unison to help develop and tune properties of interest. Certain specific examples of structure–property relationships in materials that are driven by lone pair behavior are described here, including the potential impact of lone pairs on the optical and electronic properties of hybrid halide perovskite compounds that are relevant to their photovoltaic applications. Here, we highlight the role of lone pairs in the dielectric behavior of geometrically frustrated pyrochlores, the temperature-dependent optoelectronic behavior of halide perovskites, the polar phase transitions in lead-free ferroelectric perovskites, and the compositional insulator-to-metal transition in ruthenium pyrochlores. The theme underpinning this Account is that the lone pair can be considered to be a powerful design element for a broad range of material function.

36 MATERIALS SCIENCE↗

DOE OSTI2021

The dynamic evolution of swelling in nickel concentrated solid solution alloys through in situ property monitoring

Defects and microstructural features spanning the atomic level to the microscale play deterministic roles in the expressed properties of materials. Yet studies of material evolution in response to environmental stimuli most often correlate resulting performance with one dominant microstructural feature only. In this work, the dynamic evolution of swelling in a series of Ni-based concentrated solid solution alloys under high-temperature irradiation exposure is observed using continuous, in situ measurements of thermoelastic properties in bulk specimens. Unlike traditional evaluation techniques which account only for volumetric porosity identified using electron microscopy, direct property evaluation provides an integrated response across all defect length scales. In particular, the evolution in elastic properties during swelling is found to depend significantly on the entire size spectrum of defects, from the nano- to meso-scales, some of which are not resolvable in imaging. Observed changes in thermal transport properties depend sensitively on the partitioning of electronic and lattice thermal conductivity. This emerging class of in situ experiments, which directly measure integrated performance in relevant conditions, provides unique insight into material dynamics otherwise unavailable using traditional methods.

36 MATERIALS SCIENCE↗

NASA NTRS1974

Effect of gravity on liquid phase sintering

The unique conditions offered by the earth orbital environment in material processing involving both solid and liquid phases, such as liquid phase sintering, were studied. An experimental development program involving both test and theoretical work was initiated. Experimental work using material combinations selected such that maximum information about the effect of gravity can be derived has been conducted. Wetting of the solid phase by the liquid during sintering is an important phenomenon in liquid phase sintering, and gravity has influence on both capillary phenomenon and density segregation; hence, material combinations were selected such that these two effects can be suitably studies. The experimental work is meant to form the basis for similar comparative work done under low-g conditions. The part of the model dealing with the capillary phenomenon, as related to liquid phase sintering and the effect of gravity on it, suggest that gravity will have negligible effect on the Bond number and that the cohesive force is dependent on both the amount of liquid phase and the angle of contact.

Mookherji, T.↗

DOE OSTI2019

Imaging Individual Barium Atoms in Solid Xenon for Barium Tagging in nEXO

The search for neutrinoless double beta decay probes the fundamental properties of neutrinos, including whether or not the neutrino and antineutrino are distinct. Double beta detectors are large and expensive, so background reduction is essential for extracting the highest sensitivity. The identification, or “tagging”, of the 136Ba daughter atom from double beta decay of 136Xe provides a technique for eliminating backgrounds in the nEXO neutrinoless double beta decay experiment. The tagging scheme studied in this work utilizes a cryogenic probe to trap the barium atom in solid xenon, where the barium atom is tagged via fluorescence imaging in the solid xenon matrix. Here we demonstrate imaging and counting of individual atoms of barium in solid xenon by scanning a focused laser across a solid xenon matrix deposited on a sapphire window. When the laser sits on an individual atom, the fluorescence persists for ~30 s before dropping abruptly to the background level, a clear confirmation of one-atom imaging. No barium fluorescence persists following evaporation of a barium deposit to a limit of =0.16%. This is the first time that single atoms have been imaged in solid noble element. It establishes the basic principle of a barium tagging technique for nEXO.

Chambers, C↗

DOE OSTI2025

Mk-IV Salt Crystallization Hot Finger Apparatus for Partitioning Used Electrorefiner Salt

Electrorefining is a controlled redox process used to regulate the behavior of ionic species. Through this process, metals can be deposited onto a cathode from an electrolyte solution in a controlled manner. The Mk-IV electrorefiner (Mk-IV ER) at Idaho National Laboratory is an engineering-scale, molten salt-based electrorefining cell that has been used for decades to recover metallic uranium from spent fuel. As a result, highly stable fission product chlorides have accumulated in the electrolyte. This accumulation results in changes to the salt’s properties, such as melting temperature, thermal conductivity, and density, as well as elevated product impurity and fissile materials criticality margin. These factors prompt the need for a salt regeneration process, such as melt-crystallization and species drawdown. This work focuses on providing a conceptual design to regenerate ER salt from used Mk-IV-ER salt in-situ, while minimizing salt waste volumes by concentrating the fission products in a final processed salt heal. We propose using a hot-finger crystallization apparatus design to fractionally crystallize salt in the Mk-IV-ER head space (or baffle space), allowing the collection of solid and liquid fractions. By using a cup-drain design, the used salt will be allowed to slowly solidify on the walls of a stainless-steel cup. The apparatus drain plug will then open to allow the liquid salt phase to drain to a lower cup, effectively separating the liquid phase from the solid phase. Under the hypothesis that the liquid phase salt concentrates the fission products, which is under examination in the accompanying work package, this separation allows the recovered solid salt to be reused while minimizing the high-level salt waste volume of used ER salt.

36 - MATERIALS SCIENCE↗

DOE OSTI2022

Operating High-Energy Lithium-Metal Pouch Cells with Reduced Stack Pressure Through a Rational Lithium-Host Design

Transitioning from a liquid electrolyte to an inorganic solid electrolyte offers a potential pathway to enable highly reversible lithium-metal anodes. However, the solid-electrolyte-protected lithium-metal anode suffers from poor interfacial ionic contacts and requires an impractically high stack pressure (>1.0 MPa) to maintain the interfacial contacts. It is demonstrated here that combining a hollow silver/carbon fiber scaffold and an inorganic/organic composite electrolyte enables a highly reversible lithium-metal anode. Since the high surface area of the electrode provides intimate contact and the hollow structure of the electrode relieves the lithium plating-induced stress, the electrode/electrolyte interface remains stable during cycling even under mild stack pressure. This unconventional structural design is validated in practical pouch cells assembled with the 3D lithium host containing a onefold excess of lithium and a high-nickel cathode. At a mild stack pressure of 320 kPa, the pouch cell displays 83% capacity retention for 200 cycles. This work illustrates that combining a hollow electrode architecture and a robust solid electrolyte offers a practical pathway toward rechargeable lithium-metal anodes.

36 MATERIALS SCIENCE↗

DOE OSTI2018

Architectural design and fabrication approaches for solid-state batteries

Solid-state batteries are promising candidates for energy storage due to their potential advantages in safety, working temperature range, and energy density compared to traditional liquid-electrolyte-based batteries. Rational battery architecture design and a scalable fabrication approach are critical to realize solid-state batteries. In this article, we present the architecture, fabrication procedure, and related challenges of sulfide and oxide electrolyte-based solid-state batteries. Approaches toward intimate solid–solid contact, thin solid-electrolyte fabrication, and scale-up production are discussed. Lastly, we discuss the future research directions of solid-state batteries.

25 ENERGY STORAGE↗

DOE OSTI2022

Wetting behavior of polyelectrolyte complex coacervates on solid surfaces

The wetting behavior of complex coacervates underpins their use in many emerging applications of surface science, particularly wet adhesives and coatings. Many factors dictate if a coacervate phase will condense on a solid surface, including solution conditions, the nature of the polymer–substrate interaction, and the underlying supernatant–coacervate bulk phase behavior. In this work, we use a simple inhomogeneous mean-field theory to study the wetting behavior of complex coacervates on solid surfaces both off-coexistence (wetting transitions) and on-coexistence (contact angles). Here we focus on the effects of salt concentration, the polycation/polyanion surface affinity, and the applied electrostatic potential on the wettability. We find that the coacervate generally wets the surface via a first order wetting transition with second order transitions possible above a surface critical point. Applying an electrostatic potential to a solid surface always improves the surface wettability when the polycation/polyanion–substrate interaction is symmetric. For asymmetric surface affinity, the wettability has a nonmonotonic dependence with the applied potential. We use simple scaling and thermodynamic arguments to explain our results.

36 MATERIALS SCIENCE↗