Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Signal processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Turbulent measurements in supersonic boundary layer flows using laser velocimetry

Laser velocimetry has been applied successfully in the measurement of mean velocities and Reynolds stresses in a zero pressure gradient, Mach 2.9 boundary layer, and upstream and downstream of a two-dimensional, shock-wave boundary layer interaction for the same Mach number. The Reynolds stresses were obtained using a one-component, dual-scatter laser velocimeter operated in a manner analogous to the 'slanted hot-wire' technique. Signal processing was of the single-particle counting type which permitted measurements to be made using only the naturally occurring particles in the tunnel air stream for light scattering. The results for the shock-wave boundary layer interaction are presented along with hot-wire anemometer and pitot-static pressure measurements obtained in the same flow. Also, a data acquisition scheme for use with a two-component laser velocimeter is presented which should provide even better accuracies in future studies.

Johnson, D. A.↗

Dual-purpose laboratory cage/antenna

Part of steel cage enclosing laboratory animals is used as an antenna to transmit biotelemetry over short distances. Receiving and signal processing equipment are located above ground potential to avoid transmission-path difficulties.

Lalande, B. H.↗

Solid State Television Camera (CID)

The design, development and test are described of a charge injection device (CID) camera using a 244x248 element array. A number of video signal processing functions are included which maximize the output video dynamic range while retaining the inherently good resolution response of the CID. Some of the unique features of the camera are: low light level performance, high S/N ratio, antiblooming, geometric distortion, sequential scanning and AGC.

Steele, D. W.↗

Payload specialist station study: Volume 2, part 3: Program analysis and planning for phase C/D

The controls and displays (C&D) required at the Orbiter aft-flight deck (AFD) and the core C&D required at the Payload Specialist Station (PSS) are identified in this document. The AFD C&D Concept consists of a multifunction display system (MFDS) and elements of multiuse mission support equipment (MMSE). The MFDS consists of two CRTs, a display electronics unit (DEU), and a keyboard. The MMSE consists of a manual pointing controller (MPC), five digit numeric displays, 10 character alphanumeric legends, event timers, analog meters, rotary and toggle switches. The MMSE may be hardwired to the experiment, or interface with a data bus at the PSS for signal processing. The MFDS has video capability, with alphanumeric and graphic overlay features, on one CRT and alphanumeric and graphic (tricolor) capability on a second CRT. The DEU will have the capability to communicate, via redundant data buses, with both the spacelab experiment and subsystem computers.

Source record↗

Shuttle wave experiments

Wave experiments on shuttle are needed to verify dispersion relations, to study nonlinear and exotic phenomena, to support other plasma experiments, and to test engineering designs. Techniques based on coherent detection and bistatic geometry are described. New instrumentation required to provide modules for a variety of missions and to incorporate advanced signal processing and control techniques is discussed. An experiment for Z to 0 coupling is included.

Calvert, W.↗

Linear charge coupled device detector array for imaging light propagating in an integrated thin-film optical waveguide

Device design, fabrication, and operation of a linear charge coupled device (CCD) detector array integrated with a thin film optical waveguide and applications of this structure to integrated optical signal processing and fiber optical communications were discussed. A two phase, overlapping-gate CCD is connected in parallel by means of a series of gates to an array of photodiodes. The photodiode provides an electrode free surface region so that a highly efficient waveguide detector coupling technique can be implemented. A thermally-oxidized layer of SiO2 forms an effective substrate for the optical waveguide.

Chen, C. L.↗

Laser Doppler, velocimeter system for turbine stator cascade studies and analysis of statistical biasing errors

A laser Doppler velocimeter (LDV) built for use in the Lewis Research Center's turbine stator cascade facilities is described. The signal processing and self contained data processing are based on a computing counter. A procedure is given for mode matching the laser to the probe volume. An analysis is presented of biasing errors that were observed in turbulent flow when the mean flow was not normal to the fringes.

Seasholtz, R. G.↗

Further development of an indium antimonide (InSb)Charge-Coupled Infrared Imaging Device (CCIRID), 20-element linear imager

Problems encountered in the development of an indium antimonide charge coupled device for infrared imaging and real time signal processing on the focal plane are summarized. A new generation chip is described which contains, 2, 4, and 20-element imagers, a 4-element TDI array, a monolithic gated charge integrator, and test devices. A system study of a future LANDSAT sensor system configured around an InSb TDi array is considered.

Source record↗

Radar systems for a polar mission, volume 1

The application of synthetic aperture radar (SAR) in monitoring and managing earth resources is examined. Synthetic aperture radars form a class of side-looking airborne radar, often referred to as coherent SLAR, which permits fine-resolution radar imagery to be generated at long operating ranges by the use of signal processing techniques. By orienting the antenna beam orthogonal to the motion of the spacecraft carrying the radar, a one-dimensional imagery ray system is converted into a two-dimensional or terrain imaging system. The radar's ability to distinguish - or resolve - closely spaced transverse objects is determined by the length of the pulse. The transmitter components receivers, and the mixer are described in details.

Moore, R. K.↗

Thermocouple time constant measurement by cross power spectra

A method of measuring thermocouple time constants is outlined which requires Fourier signal processing. In this method, two thermocouples of differing time constants are placed in a gas flow as closely as possible to one another, and the time constant of the first thermocouple is determined directly from the extremum of the imaginary part of the ratio of the ensemble averaged cross-power spectrum to the ensemble averaged auto-power spectrum of that thermocouple. A coherence function is given for assuring the quality of the data, and results are presented for an experimental test of the method. Some problems with the method are briefly noted.

Strahle, W. C.↗

Digital control of high performance aircraft using adaptive estimation techniques

In this paper, an adaptive signal processing algorithm is joined with gain-scheduling for controlling the dynamics of high performance aircraft. A technique is presented for a reduced-order model (the longitudinal dynamics) of a high performance STOL aircraft. The actual controller views the nonlinear behavior of the aircraft as equivalent to a randomly switching sequence of linear models taken from a preliminary piecewise-linear fit of the system nonlinearities. The adaptive nature of the estimator is necessary to select the proper sequence of linear models along the flight trajectory. Nonlinear behavior is approximated by effective switching of the linear models at random times, with durations reflecting aircraft motion in response to pilot commands.

Van Landingham, H. F.↗

A telescope for the Infrared Astronomical Satellite /IRAS/

The Infrared Astronomical Satellite (IRAS) will be used to survey the 8 to 120 micron spectrum of the entire sky to the faintest flux levels possible by using state-of-the-art detectors and preamplifiers. As a result of a recently completed study of the telescope and focal plane, a concept has been devised that demonstrates the feasibility of using stored cryogen to cool the telescope for one year of operation in a polar twilight orbit at an altitude of 900 km. Predictions regarding noise equivalent flux density, cryogenic lifetime, and the number of noise spikes caused by Van Allen belt radiation are presented. The telescope is cooled both by supercritical and by superfluid helium. The on-board signal processing includes provisions for suppressing noise spikes.

Hedden, R. L.↗

Application of the high resolution return beam vidicon

The Return Beam Vidicon (RBV) is a high-performance electronic image sensor and electrical storage component. It can accept continuous or discrete exposures. Information can be read out with a single scan or with many repetitive scans for either signal processing or display. Resolution capability is 10,000 TV lines/height, and at 100 lp/mm, performance matches or exceeds that of film, particularly with low-contrast imagery. Electronic zoom can be employed effectively for image magnification and data compression. The high performance and flexibility of the RBV permit wide application in systems for reconnaissance, scan conversion, information storage and retrieval, and automatic inspection and test. This paper summarizes the characteristics and performance parameters of the RBV and cites examples of feasible applications.

Cantella, M. J.↗

Acoustic source location in the secondary mixing region of a jet-blown flap using a cross-correlation technique

An experimental investigation of the acoustic sources in the secondary mixing region of a laboratory-scale jet-flap was made using a causality correlation technique. The processed signal of a hot-film anemometer probe was cross correlated with the output signal of a far-field microphone. Axial acoustic source strength distributions were measured for three far-field microphone locations: plus or minus 45 deg in the flyover plane and 45 deg in the sideline plane. These measurements showed that the acoustic sources in the secondary mixing region are highly directional, radiating much more effectively to the -45 deg-microphone, located below the plane of the flap surface. A relative maximum in the acoustic source strength measured for the microphones in the flyover plane occurred very near the flap trailing edge, which may be due to an edge amplification effect predicted by the theoretical work of Ffowcs Williams and Hall.

Becker, R. S.↗

A gas filter correlation monitor for CO, CH4, and HCl

A fast response instrument for monitoring the atmospheric constituents CO, CH4, and HCl, using a modified nondispersive infrared technique, was designed, assembled, and tested. This gas filter correlation method uses a sample of gas to provide a selective filter for radiation absorbed in a gas mixture containing the specified gas. Depending on the spectral line broadening, temperature, and optical depth of the gas selected, exceptionally high spectral resolution may be attained. A description of the single beam rotating cell system and its specific application is presented along with the signal processing circuit. Calibrations of the instrument show that the technique can be used to measure CO, CH4, and HCl concentrations as small as 5 ppm-m. A field version was employed to measure diurnal variations of CO and CH4 and the interfering effects of other atmospheric gases were analyzed.

Sebacher, D. I.↗

Use of a multi-look unfocussed SAR processor on spacecraft

Two methods of processing signals from a multi-look unfocussed synthetic-aperture radar are considered. A saving in the processor complexity is achieved in comparison to a fully focussed SAR system at the expense of slightly greater clutter levels and poorer along-track resolution. In addition, lower power consumption enables the unfocussed processor to increase the number of looks to compensate in part for the reduced resolution.

Fong, R. K. T.↗

The study of surface acoustic wave charge transfer device

A surface acoustic wave-charge transfer device, consisting of an n-type silicon substrate, a thermally grown silicon dioxide layer, and a sputtered film of piezoelectric zinc oxide is proposed as a means of circumventing problems associated with charge-coupled device (CCD) applications in memory, signal processing, and imaging. The proposed device creates traveling longitudinal electric fields in the silicon and replaces the multiphase clocks in CCD's. The traveling electric fields create potential wells which carry along charges stored there. These charges may be injected into the wells by light or by using a p-n junction as in conventional CCD's.

Papanicolaou, N.↗

A tutorial introduction to Very Long Base-line Interferometry (VLBI) using bandwidth synthesis

The basic principles underlying very long baseline interferometry (VLBI) are described by using bandwidth synthesis. The basic signal processing approach is detailed. Summarized results show the tradeoff of measurement accuracy with spanned bandwidth, source strength, antenna size and efficiency, system noise temperature, and data volume. Minimization of required antenna time for a given baseline measurement accuracy is also discussed.

Molinder, J. I.↗