Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shear Layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

The development of experimental techniques for the study of helicopter rotor noise

The features of existing wind tunnels involved in noise studies are discussed. The acoustic characteristics of the MIT low noise open jet wind tunnel are obtained by employing calibration techniques: one technique is to measure the decay of sound pressure with distance in the far field; the other technique is to utilize a speaker, which was calibrated, as a sound source. The sound pressure level versus frequency was obtained in the wind tunnel chamber and compared with the corresponding calibrated values. Fiberglas board-block units were installed on the chamber interior. The free field was increased significantly after this treatment and the chamber cut-off frequency was reduced to 160 Hz from the original designed 250 Hz. The flow field characteristics of the rotor-tunnel configuration were studied by using flow visualization techniques. The influence of open-jet shear layer on the sound transmission was studied by using an Aeolian tone as the sound source. A dynamometer system was designed to measure the steady and low harmonics of the rotor thrust. A theoretical Mach number scaling formula was developed to scale the rotational noise and blade slap noise data of model rotors to full scale helicopter rotors.

Widnall, S. E.↗
NASA NTRS1975

An investigation of several numerical procedures for time-asymptotic compressible Navier-Stokes solutions

The status of an investigation of four numerical techniques for the time-dependent compressible Navier-Stokes equations is presented. Results for free shear layer calculations in the Reynolds number range from 1000 to 81000 indicate that a sequential alternating-direction implicit (ADI) finite-difference procedure requires longer computing times to reach steady state than a low-storage hopscotch finite-difference procedure. A finite-element method with cubic approximating functions was found to require excessive computer storage and computation times. A fourth method, an alternating-direction cubic spline technique which is still being tested, is also described.

Rudy, D. H.↗
NASA NTRS1976

OTW noise correlation for variations in nozzle/wing geometry with 5:1 slot nozzles

Acoustic data obtained from a model-scale study with 5:1 slot nozzles are analyzed and correlated in terms of apparent noise sources. Variations in nozzle geometry include roof angle and sidewall cutback. In addition, geometry variations in wing size and flap deflection are included. Three dominant noise sources were evident in the data and correlated: fluctuating lift noise, trailing edge noise and a redirected jet mixing noise that included the effect of reflection of jet noise by the surface. Pertinent variables in the correlations include the shear layer thickness and peak jet flow velocity at the trailing edge.

Vonglahn, U.↗
NASA NTRS1976

Experimental investigation of oscillations in flows over shallow cavities

Wind tunnel experiments were carried out with three axisymmetric models to study laminar axisymmetric flows over shallow cavities at low subsonic speeds. The first model had a hemispherical nose, the second an ogive-shape nose, and the third an elliptic nose. Constant-temperature hot-wire anemometry was used in measuring both mean and fluctuating quantities. Flow around the cavity was visualized by heating the first model. To study the effect of mass injection on cavity oscillations, air was injected circumferentially all along the base of the cavity. Major results are that the cavity depth has little effect on oscillations in shallow cavities except when the depth is of the order of the thickness of the cavity shear flow, that downstream corner is the key factor in inducing self-sustained oscillations in the cavity shear layer, and that the presence of a back face results in an integral relation between wave length of the propagating disturbances and the cavity width in each mode of cavity operation.

Sarohia, V.↗
NASA NTRS1976

Second-order closure analysis of turbulent reacting flows

A reacting shear layer program for a complete second-order closure of turbulent reacting flows is developed. The program uses a typical eddy box model and many of the fluid mechanical turbulence models developed in earlier studies. The computer program actually solves a total of 30 equations, where the numerical integration of the equations is performed by a forward-time-centered space quasi-implicit upwind finite-difference scheme. Results for nonreacting and simple isothermal reacting flows are presented along with preliminary results for propane-air flames. It is shown that the program predictions for simple nonreacting flows are in good agreement with available data. The calculations for isothermal reacting flows demonstrate the importance of including a mixedness correlation in finite rate chemistry calculations, where significant errors in the flowfield properties can result from neglect of the interaction between turbulence and the chemistry. Results for propane-air diffusion flames further support this conclusion.

Varma, A. K.↗
NASA NTRS1976

The axisymmetric jet counterflow problem

A numerical method for computing the flow field of an underexpanded axisymmetric supersonic jet flowing counter to a uniform supersonic stream is described. The strong shock waves and shear layers which occur in the flow are treated as normal and tangential discontinuities bounding regions of inviscid flow. Within the regions, the unsteady gasdynamic equations are solved in integral form on a moving computational mesh. As the numerical flow field evolves, the mesh is deformed according to the jump relations applied at the discontinuities, thus determining their positions as part of the solution. Also presented are computed results obtained for a wide range of jet total pressure. The standoff distances of the bow shock and jet shock are in good agreement with those measured experimentally, thus demonstrating the accuracy of the numerical method.

Schiff, L. B.↗
NASA NTRS1976

Analysis of neutrally stable atmospheric flow over a two-dimensional forward facing step

A mathematical model describing ground-wind induced flow fields around surface obstructions such as buildings, bridges or other man-made structures is presented. The Navier-Stokes equations with a two-equation turbulence model are used to analyze the flow over a two-dimensional forward facing step. A study of the assumed logarithmic approach velocity profile shows that an increase of surface roughness produces a rise to higher turbulence levels in the shear layer originating from the step corner. This rise leads to higher Reynolds stress and to faster reattachment of the separated flow.

Bitte, J.↗
NASA NTRS1976

OTW noise correlation for variations in nozzle/wing geometry with 5:1 slot nozzles

Acoustic data obtained from a model-scale study with 5:1 slot nozzles are analyzed and correlated in terms of apparent noise sources. Variations in nozzle geometry include roof angle and sidewall cutback. In addition, geometry variations in wing size and flap deflection were included. Three dominant noise sources were evident in the data and correlated: fluctuating lift noise, trailing edge noise and a redirected jet mixing noise that included the effect of reflection of jet noise by the surface. Pertinent variables in the correlations included the shear layer thickness and peak jet flow velocity at the trailing edge.

Von Glahn, U.↗
NASA NTRS1976

A vortex model of cavity flow

The paper presents a model of two-dimensional cavity flow in which the shear layer over the cavity is represented by discrete rectilinear vortices which are free to move as the flow progresses. Although the model is initially started impulsively, the computation is continued until a statistically steady flow is attained. The broadband noise generation of the cavity is calculated by first running the model until the steady state is reached and then computing a stationary record of far-field density fluctuation through an equation that is suitable for calculating the quadrupole noise generation by the model. The discrete time series obtained can be analyzed by ordinary digital spectral techniques to determine the spectra and overall levels of the noise in airframe noise testing of real aircraft.

Hardin, J. C.↗
NASA NTRS1976

A kinetic-theory approach to turbulent chemically reacting flows

The paper examines the mathematical and physical foundations for the kinetic theory of reactive turbulent flows, discussing the differences and relation between the kinetic and averaged equations, and comparing some solutions of the kinetic equations obtained by the Green's function method with those obtained by the approximate bimodal method. The kinetic method described consists essentially in constructing the probability density functions of the chemical species on the basis of solutions of the Langevin stochastic equation for the influence of eddies on the behavior of fluid elements. When the kinetic equations are solved for the structure of the diffusion flame established in a shear layer by the bimodal method, discontinuities in gradients of the mean concentrations at the two flame edges appear. This is a consequence of the bimodal approximation of all distribution functions by two dissimilar half-Maxwellian functions, which is a very crude approximation. These discontinuities do not appear when the solutions are constructed by the Green's function method described here.

Chung, P. M.↗
NASA NTRS1975

The slow recirculating flow near the rear stagnation point of a wake

A model is suggested in which some of the important features of the circulating flow inside the two-dimensional near wake are derived by assuming a slow viscous flow. The theory considers the flow away from the body base. It is found that there is a region of constant speed merging, as we go downstream, into a region of stagnation-apex flow. The velocity returning from the rear stagnation point along the center streamline is shown to be a slowly varying function of the 'wedge-angle,' of the wake and to be roughly one half the velocity at the edge of the shear layers driving the wake-cavity flow. These results seem to be in agreement with experimental data.

Abarbanel, S.↗
NASA NTRS1976

Numerical solution of supersonic three-dimensional free-mixing flows using the parabolic-elliptic Navier-Stokes equations

A numerical method is presented for solving the parabolic-elliptic Navier-Stokes equations. The solution procedure is applied to three-dimensional supersonic laminar jet flow issuing parallel with a supersonic free stream. A coordinate transformation is introduced which maps the boundaries at infinity into a finite computational domain in order to eliminate difficulties associated with the imposition of free-stream boundary conditions. Results are presented for an approximate circular jet, a square jet, varying aspect ratio rectangular jets, and interacting square jets. The solution behavior varies from axisymmetric to nearly two-dimensional in character. For cases where comparisons of the present results with those obtained from shear layer calculations could be made, agreement was good.

Hirsh, R. S.↗
NASA NTRS1977

A numerical investigation of the finite element method in compressible primitive variable Navier-Stokes flow

The results of a comprehensive numerical investigation of the basic capabilities of the finite element method (FEM) for numerical solution of compressible flow problems governed by the two-dimensional and axis-symmetric Navier-Stokes equations in primitive variables are presented. The strong and weak points of the method as a tool for computational fluid dynamics are considered. The relation of the linear element finite element method to finite difference methods (FDM) is explored. The calculation of free shear layer and separated flows over aircraft boattail afterbodies with plume simulators indicate the strongest assets of the method are its capabilities for reliable and accurate calculation employing variable grids which readily approximate complex geometry and capably adapt to the presence of diverse regions of large solution gradients without the necessity of domain transformation.

Cook, C. H.↗
NASA NTRS1976

Investigation of the effects of a moving acoustic medium on jet noise measurements

Noise from an unheated sonic jet in the presence of an external flow is measured in a free-jet wind tunnel using microphones located both inside and outside the flow. Comparison of the data is made with results of similar studies. The results are also compared with theoretical predictions of the source strength for jet noise in the presence of flow and of the effects of sound propagation through a shear layer.

Cole, J. E., III↗
NASA NTRS1976

A numerical solution of the axisymmetric jet counterflow problem

A numerical computation of a normal shock case in which the shock waves and shear layers are modeled as normal and tangential discontinuities bounding the regions of an inviscid flow is discussed. Within these regions the unsteady gasdynamic equations are solved in finite-volume form on a moving computational mesh. The positions of discontinuities are determined from the jump conditions. The results obtained for values of the ratio of jet total pressure to free-stream total pressure ranging from 10.0 to 100.0 are found to be in agreement with the experimental results obtained by Fleeman and Nelson (1974).

Schiff, L. B.↗
NASA NTRS1977

Vortex pairing and organized structures in axisymmetric jets under controlled excitation

A description is given of experiments which have been carried out in a circular air jet facility consisting of two settling chambers in sequence. Sinusoidal perturbations in the exit profile are introduced at controlled frequencies and amplitudes with the aid of a loudspeaker attached to the wall of the first chamber. It was found that vortex pairing in circular jets can occur in two distinct modes, including the shear layer mode and the jet mode. Amplitude variations, the conditions for strong vortex pairing, and the spectral evolution downstream are illustrated with the aid of graphs.

Zaman, K. B. M. Q.↗
NASA NTRS1976

Exhaust gas emissions of a vortex breakdown stabilized combustor

Exhaust gas emission data are described for a swirl stabilized continuous combustor. The combustor consists of confined concentric jets with premixed fuel and air in the inner jet and air in the outer jet. Swirl may be induced in both inner and outer jets with the sense of rotation in the same or opposite directions (co-swirl and counter-swirl). The combustor limits NO emissions by lean operation without sacrificing CO and unburned hydrocarbon emission performance, when commercial-grade methane and air fired at one atmosphere without preheat are used. Relative swirl direction and magnitude are found to have significant effects on exhaust gas concentrations, exit temperatures, and combustor efficiencies. Counter-swirl gives a large recirculation zone, a short luminous combustion zone, and large slip velocities in the interjet shear layer. For maximum counter-swirl conditions, the efficiency is low.

Yetter, R. A.↗
NASA NTRS1977

An experimental investigation of the trailing edge noise mechanism

An experimental investigation has been conducted to understand the physical mechanism of noise generation from a turbulent wall jet discharging over a flat plate and interacting with its sharp trailing edge. An aspect ratio 10 rectangular nozzle was used to provide the wall jet. Measurements made consist of farfield noise, surface pressure fluctuations, turbulent velocity fluctuations, and two-point space-time cross-correlations among these quantities. Results are presented which suggest strongly that the generation mechanism is the interaction of the convecting large scale quasi-orderly disturbance in the upper free shear layer of the wall jet with the trailing edge. The interaction also excites large scale strong vortical motion in the trailing edge wake. The dominant part of the sound field is highly coherent and in phase opposition across the trailing edge.

Yu, J. C.↗