Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SHADING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Applied photo interpretation for airbrush cartography

Lunar and planetary exploration has required the development of new techniques of cartographic portrayal. Conventional photo-interpretive methods employing size, shape, shadow, tone, pattern, and texture are applied to computer-processed satellite television images. Comparative judgements are affected by illumination, resolution, variations in surface coloration, and transmission or processing artifacts. The portrayal of tonal densities in a relief illustration is performed using a unique airbrush technique derived from hill-shading of contour maps. The control of tone and line quality is essential because the mid-gray to dark tone densities must be finalized prior to the addition of highlights to the drawing. This is done with an electric eraser until the drawing is completed. The drawing density is controlled with a reflectance-reading densitometer to meet certain density guidelines. The versatility of planetary photo-interpretive methods for airbrushed map portrayals is demonstrated by the application of these techniques to the synthesis of nonrelief data.

Inge, J. L.↗

Photometry of Venus from Mariner 10

Photometry of the upper atmosphere of Venus from Mariner 10 on February 5, 1974 is discussed with respect to in-flight verification of camera linearity, shading, and absolute photometric calibration. Among photometric results are the following: (1) temporal brightness variations were observed in the UV greater than 10% over a few hours due to the rapid rotation of the upper atmosphere, (2) the observed terminator was 4 degrees past the geometric terminator due to detached haze layers at altitudes around 85 km, (3) there were no indications of cloud top elevation variations greater than a few hunderd meters, and (4) in the UV, the bright and dark regions both had low albedos in all scales, showing that the UV absorber is not confined just to dark markings.

Hapke, B.↗

Remote sensing application to regional activities

Two agencies within the State of Tennessee were identified whereby the transfer of aerospace technology, namely remote sensing, could be applied to their stated problem areas. Their stated problem areas are wetland and land classification and strip mining studies. In both studies, LANDSAT data was analyzed with the UTSI video-input analog/digital automatic analysis and classification facility. In the West Tennessee area three land-use classifications could be distinguished; cropland, wetland, and forest. In the East Tennessee study area, measurements were submitted to statistical tests which verified the significant differences due to natural terrain, stripped areas, various stages of reclamation, water, etc. Classifications for both studies were output in the form of maps of symbols and varying shades of gray.

Shahrokhi, F.↗

Atmospheric, Magnetospheric and Plasmas in Space (AMPS) spacelab payload definition study. Volume 3: Interface control documents. Part 2: AMPS payload to spacelab ICD

The AMPS to Spacelab Interface Control Document which is to be used as a guide for format and information content in generating specific AMPS Mission ICDs is presented. This document is meant to supplement the Spacelab Payload Accommodations Handbook in that it only defines interfaces which are not discussed in the handbook to the level required for design purposes. The AMPS Top Level Requirements Tree, illustrates this ICD by a shaded area and its relationship to the other AMPS technical documents. Other interface documents shown are the Level II, AMPS to Space Shuttle Vehicle ICD and the Level III, AMPS to Instruments ICD.

Source record↗

Agriculture/forestry hydrology

The author has identified the following significant results. The main vegetation units of the lower Mekong basin and the land development conditions were mapped by interpretation of LANDSAT 1 data. By interpretation of various shades of gray on satellite images, it was possible to map the density of the vegetation cover. Study of seasonal variations makes it possible to distinguish between mainly deciduous forests. In the Mekong basin area, these are generally related to the vegetation cover density.

Vanderoord, W. J.↗

Precision processing of earth image data

Precise corrections of Landsat data are useful for generating land-use maps, detecting various crops and determining their acreage, and detecting changes. The paper discusses computer processing and visualization techniques for Landsat data so that users can get more information from the imagery. The elementary unit of data in each band of each scene is the integrated value of intensity of reflected light detected in the field of view by each sensor. To develop the basic mathematical approach for precision correction of the data, differences between positions of ground control points on the reference map and the observed control points in the scene are used to evaluate the coefficients of cubic time functions of roll, pitch, and yaw, and a linear time function of altitude deviation from normal height above local earth's surface. The resultant equation, termed a mapping function, corrects the warped data image into one that approximates the reference map. Applications are discussed relative to shade prints, extraction of road features, and atlas of cities.

Bernstein, R.↗

A brief review of digital image processing

The review is presented with particular reference to Skylab S-192 and Landsat MSS imagery. Attention is given to rectification (calibration) processing with emphasis on geometric correction of image distortions. Image enhancement techniques (e.g., the use of high pass digital filters to eliminate gross shading to allow emphasis of the fine detail) are described along with data analysis and system considerations (software philosophy).

Billingsley, F. C.↗

A Landsat Digital Image Rectification System

DIRS is a Digital Image Rectification System for the geometric correction of Landsat Multispectral Scanner digital image data. DIRS removes spatial distortions from the data and brings it into conformance with the Universal Transverse Mercator (UTM) map projection. Scene data in the form of landmarks or Ground Control Points (GCPs) are used to drive the geometric correction algorithms. The system offers extensive capabilities for 'shade printing' to aid in the determination of GCPs. Affine, two dimensional least squares polynominal and spacecraft attitude modeling techniques for geometric mapping are provided. Entire scenes or selected quadralaterals may be rectified. Resampling through nearest neighbor or cubic convolution at user designated intervals is available. The output products are in the form of digital tape in band interleaved, single band or CCT format in a rotated UTM projection. The system was designed and implemented on large scale IBM 360 computers with at least 300-500K bytes of memory for user application programs and five nine track tapes plus direct access storage.

Van Wie, P.↗

Saturn - Long-term variation of H2 and CH4 absorptions

Results are presented for observations of various H2 quadrupole lines and CH4 absorption bands in spectra of Saturn obtained with a coude scanner at each apparition since 1969. The data are found to indicate a long-term variation in Saturn's H2 equivalent widths, a seasonal dependence of H2 line strength, and a fairly steady increase in CH4 absorption during the period from 1973 to 1976. A possible correlation between planetary shading and the strength of H2 absorption features is discussed along with seasonal variations in Saturn's NH3 cloud deck and atmospheric models that correspond to the observed H2 equivalent widths. It is suggested that: (1) significant shadowing by the rings may cause dynamical atmospheric activity due to the occurrence of a temperature gradient in the penumbral boundaries of the ring shadow in the planet's upper atmosphere; (2) cooling in the shadow may be a source of a high-altitude CH4 mist; and (3) spreading of this mist over the globe by advective winds would reduce the H2 and CH4 absorptions, as observed.

Trafton, L.↗

Where do we locate the moon base

Because the lunar polar regions permit continuous solar energy collection and adjacent cryogenic temperature, they may be the preferred sites for early human occupation and use of the moon. If permafrost exists in the polar shaded regions, this preference will become dominant. Though not ideal from the point of view of all-sky coverage for astronomical observations, and also possibly subject to terminator-plane particle hazes near the surface, polar sites (especially the south polar region) may offer enough advantages (e.g., constant cryogenic telescope environments and unlimited tracking time) to be preferred sites for the first lunar observatories.

Burke, J. D.↗

Improved scene generator capability

Components of an integrated system having all functions for model preparation and generation, image computation and scene generation, and collision detection and reporting for the visual simulation of space shuttle maneuvers and its interaction with the manipular arm and other objects, as well as during earth landing exercises are described. High surface solution by range priority allows for correct views of dynamically moving objects from any viewpoint. Smooth shading, anti-aliasing and edge smoothing techniques provide a high quality picture. The collision detection system allows for simulation of impenetrable objects and docking maneuvers, and the modeling systems permit production of new data bases for desired simulations.

Source record↗

Remote sensing applications to hydrologic modeling in the southern Sierra Nevada and portions of the San Joaquin Valley, volume 1

The author has identified the following significant results. Characteristics of LANDSAT MSS imagery present problems in using satellite radiation measurements to estimate the shortwave albedo of an alpine snow cover. Every 15 minute USGS quadrangle contains over 100,000 pixels which poses a computation problem if each pixel is to be evaluated individually. The sampling interval may be sufficiently great to mask some effects of terrain and vegetation on reflectance. Three frames of LANDSAT imagery are needed for complete coverage of the study area, yet less than one third of the area coverage from each frame covers an area of interest. Because of distortions inherent in the imagery, information regarding spacecraft altitude, attitude, and position must be statistically derived with respect to ground control points in the image whose geodetic locations are known. An inspection of shade points indicates that up to one third of the most heavily snow covered areas may saturate in bands 4 through 6. LANDSAT's 9 day repeat cycle is not optimum for snow cover reflectance modeling because the most pronounced changes in albedo occur most nearly following a new snowfall. Such a snowfall, occurring between overpasses, is inadequately represented by extrapolation from the previous overpasses.

Dozier, J.↗

Use of LANDSAT data for natural resources investigation in the lower basin of Danube and Danube Delta

The author has identified the following significant results. Monitoring of excess humidity was possible at the Baragan test site. Qualitative improvements of 20-50% were obtained in regards to soil inventory in the eastern Danube Delta, comparing data with conventional maps. The pedological situation was observed after drainage in impounded enclosures. The appearance of stagnate water was surveyed due to difference in color shades on LANDSAT imagery. Areas with gluey soils, such as lake bottoms rich in CaCO3 and shell grist, were clearly represented. Sediment discharges into the sea at the Danube mouth and plumes over 100 km at sea could be easily distinguished on LANDSAT MSS 4 and 5.

Oprescu, N.↗

Aspect system for HEAO-B

The aspect system for the HEAO-B Observatory provides the necessary absolute referencing of the Observatory coordinates to the celestial sphere with a precision of one arc second. In addition, it provides realtime data to the Spacecraft to permit pointing of the Observatory to one arc minute. The system is composed of three star trackers with associated shades, a pair of bright object detectors and a fiducial light system for referencing the experiment X-ray axis to the star tracker axes.

Koch, D.↗

Color of kerogen as index of organic maturity

Kerogen from the Tanner basin off southern California was heated under nitrogen at different temperatures and times and subsequently was studied under the transmitted light microscope. Samples darken in color from yellow through shades of brown to black with increasing thermal maturation. The transition from dark brown to very dark brown marks the range of maximum n-alkane generation where the residue attains an atomic H/C of about 0.80 plus or minus 0.05. The apparent activation energy for this transition was about 45 plus or minus 5 kcal per mole.

Peters, K. E.↗

Lagrangian drifter design for the determination of surface currents by remote sensing

In estuaries, the interaction of wind, tidal current, and mixing of fresh and saline water produces a variable depth profile of current, with foam lines and convergence zones between water types. Careful measurement of surface currents via Lagrangian drifters requires a drifter design appropriate to both the depth of current to be measured and the tide and wind conditions of interest. The use of remote sensing to track drifters contributes additional constraints on drifter design. Several designs of biodegradable drifters which emit uranine dye plumes, resolvable in aerial imagery to 1:60,000 scale, were tested for wind drag in field conditions against data from calibrated current meters. A 20 cm-vaned wooden drifter and a window shade drifter set to 1.5 m depth had negligible wind drag in winds to 8 m/sec. Prediction of oil slick trajectories using surface current data and a wind factor should be approached cautiously, as surface current data may be wind-contaminated, while the usual 3.5% wind factor is appropriate only for currents measured at depth.

Gordon, H. H.↗

Prediction of ion drift effects on spacecraft floating potentials

The plasma environment of high altitude spacecraft was observed to involve ion drift velocities which sometimes become comparable to ion mean thermal speeds. Such drifts may cause an electrically isolated spacecraft surface to float at a substantially increased negative potential if it is simultaneously shaded and downstream relative to the drift direction. The results showed that: (1) the ion speed ratio at which drift effects become important (i.e. change the floating potential by at least 10 percent) can be as low as 0.1, and may be decreased if the ambient electrons are non-Maxwellian; (2) the effects of ion speed ratio increase with increasing ion-to-electron temperature ratio; and (3) negative floating potentials for drifting Maxwellian ion velocity distributions with speed ratio unity are typically about twice as large as the corresponding potentials for nondrifting conditions.

Chang, J. S.↗