Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEEDING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Restoration of species-rich grasslands on ex-arable land: seed addition outweighs soil fertility reduction

A common practice in biodiversity conservation is restoration of former species-rich grassland on ex-arable land. Major constraints for grassland restoration are high soil fertility and limited dispersal ability of plant species to target sites. Usually, studies focus on soil fertility or on methods to introduce plant seeds. However, the question is whether soil fertility reduction is always necessary for getting plant species established on target sites. In a three-year field experiment with ex-arable soil with intensive farming history, we tested single and combined effects of soil fertility reduction and sowing mid-successional plant species on plant community development and soil biological properties. A controlled microcosm study was performed to test short-term effects of soil fertility reduction measures on biomass production of mid-successional species. Soil fertility was manipulated by adding carbon (wood or straw) to incorporate plant-available nutrients into organic matter, or by removing nutrients through top soil removal (TSR). The sown species established successfully and their establishment was independent of carbon amendments. TSR reduced plant biomass, and effectively suppressed arable weeds, however, created a desert-like environment, inhibiting the effectiveness of sowing mid-successional plant species. Adding straw or wood resulted in short-term reduction of plant biomass, suggesting a temporal decrease in plant-available nutrients by microbial immobilisation. Straw and wood addition had little effects on soil biological properties, whereas TSR profoundly reduced numbers of bacteria, fungal biomass and nematode abundance. In conclusion, in ex-arable soils, on a short term sowing is more effective for grassland restoration than strategies aiming at soil fertility reduction.

09 BIOMASS FUELS↗

The radiated power limit in impurity seeded JET-ILW plasmas

The total radiated fraction is examined in high density H-mode plasmas (Greenwald fraction of about 85 %) in JET by the variation of the auxiliary heating power of Pheat = 14 MW-29 MW. An achieved radiation fraction of about 75 % at most has been observed in JET-ILW, which is less than the highest achievable (≈90 %) fraction in JET-C during the high radiative power scenarios with N2 seeding. It is shown that the maximal achievable total radiation fraction averaged over ELM cycles has a strong dependence on the radiation efficiency of the ELM energy, $θ_{rad}$: $\gamma^{max}_{rad,total}$ = 1 -$\frac {f_{ELM} x ΔW_{ELM}} {P_heat}$ (1- $θ_{rad}$). About 50 % and 16 % of the ELM induced diamagnetic energy drop (ΔW ELM ) radiates during the ELM in JET-C and JET-ILW, respectively, which corresponds to the maximum total radiated powers of $\gamma^{max}_{rad,JET-C}$ = 0.87 and $\gamma^{max}_{rad,JET-ILW}$ = 0.77. These values of the maximum of the radiative power fractions are in good agreement with $\gamma^{max}_{rad}$ experimentally observed in JET-C (90 %) and JET-ILW (75 %).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Controlling shape memory effects in NiTi thin films grown on Ru seed layer

NiTi thin films with robust shape memory effects and low deposition temperatures are greatly desired for microelectronic devices. However, sub-micron films deposited below 425 °C usually have amorphous structure and must be post-annealed to achieve full crystallization. In this article, using Ru as a seed layer, we demonstrate growth of NiTi films as thin as 120 nm with in-situ crystallization at 325 °C. NiTi thin films with a wide range of growth parameters including deposition temperature and film thickness were investigated. Shape memory effects were characterized using stress bow and resistivity studies. Structural information across the R-phase to austenite transformation was obtained using X-ray diffraction. NiTi thin films exhibited a narrow hysteresis during R-phase to austenite phase transition near 60 °C while possessing good shape memory properties.

36 MATERIALS SCIENCE↗

Seed-Mediated Growth of Au Nanospheres into Hexagonal Stars and the Emergence of a Hexagonal Close-Packed Phase

Gold (Au) typically crystallizes in a cubic close-packed ( ccp ) structure to present a face-centered cubic ( fcc ) lattice or crystal phase. Herein, we demonstrate that Au nanoscale hexagonal stars featuring a hexagonal close-packed (hcp) structure can be synthesized in an aqueous system in the presence of fcc -Au nanospheres as the seeds. The success of this synthesis critically relies on the use of ethylenediaminetetraacetic acid to complex with Au 3+ ions (the precursor) and the introduction of 2-phospho-l-ascorbic acid trisodium salt (Asc-2P) as a novel reducing agent to maneuver the reduction kinetics. The use of Asc-2P favorably promotes the formation of hexagonal stars with uneven surfaces at the top and bottom faces, together with concave side faces around the edges. By varying the amount of Asc-2P to fine-tune the reduction kinetics, we can adjust the concaveness of the side faces, with a faster reduction rate favoring greater concaveness and a red shift of the plasmon resonance peak to the near-infrared. For the first time, our results suggest that the phosphate and hydroxyl groups can act synergistically in controlling the morphology of Au nanocrystals. Most significantly, the newly deposited Au atoms can also crystallize in an hcp structure, leading to the observation of a phase transition from fcc to hcp along the growth direction. This new protocol based upon kinetic control can be potentially extended to other noble metals for the facile synthesis of nanocrystals featuring unprecedented structures or phases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Controlling the Aspect Ratios of Au Nanocrystals with Ag+ Addition Time in Seed-Mediated Synthesis: Implications for Surface-Enhanced Raman Scattering

Among various factors playing pivotal roles in the typical seed-mediated growth of Au nanocrystals (NCs), the role of Ag (AgNO3) has remained debatable over time and seminal research efforts have helped us in reaching a consensus, albeit from the standpoint of [Ag+] concentration. This study aims to provide an understanding of the role of Ag+ from the perspective of time. Here, we show that different Au NCs with tunable aspect ratios (ARs) can be generated in one system in high yield simply by varying the time of addition of Ag+ in the growth solution. The generality of the method has been demonstrated in tuning the ARs of anisotropic Au NCs like concave cuboid (CCB, AR = 2) and elongated tetrahexahedra (AR = 2.5), where the delayed addition of Ag+ leads to the formation of their isotropic counterpart concave cube (CC, AR = 1) and tetrahexahedra (AR = 1), respectively. This work, apart from establishing timed addition of Ag+ as a crucial parameter in controlling the AR, may also help in the realization of a universal growth mechanism of Au NCs. The Au NCs with varying ARs (CCB, AR = 2 and CC, AR = 1) have been further explored as potential substrates for surface-enhanced Raman scattering (SERS) due to the presence of their high-index facets and sharp tips.

KEYWORDS:Au nanoparticles seed-mediated growth hig↗

Biaxially-Textured Photovoltaic Film Crystal Silicon on Ion Beam Assisted Deposition CaF2 Seed Layers on Glass

We grow biaxially textured heteroepitaxial crystal silicon (c-Si) films on display glass as a low-cost photovoltaic material. We first fabricate textured CaF{sub 2} seed layers using ion-beam assisted deposition, then coat the CaF{sub 2} with a thin, evaporated epitaxial Ge buffer and finally deposit heteroepitaxial silicon on the Ge. The silicon is grown by hot-wire chemical vapor deposition, a high-rate, scalable epitaxy technology. Electron and X-ray diffraction confirm the biaxial texture of the CaF{sub 2} and epitaxial growth of the subsequent layers. Transmission electron microscopy reveals columnar silicon grains about 500 nm across. We fabricate a proof-of-concept epitaxial film c-Si solar cell with an open circuit voltage of 375 mV that is limited by minority carrier lifetime.

14 SOLAR ENERGY↗

Laser-rf creation and diagnostics of seeded atmospheric pressure air and nitrogen plasmas

A laser initiation and radio frequency (rf) sustainment technique has been developed and improved from our previous work to create and sustain large-volume, high-pressure air and nitrogen plasmas. This technique utilizes a laser-initiated, 15 mTorr partial pressure tetrakis (dimethylamino) ethylene seed plasma with a 75 Torr background gas pressure to achieve high-pressure air/nitrogen plasma breakdown and reduce the rf power requirement needed to sustain the plasma. Upon the laser plasma initiation, the chamber pressure is raised to 760 Torr in 0.5 s through a pulsed gas valve, and the end of the chamber is subsequently opened to the ambient air. The atmospheric-pressure plasma is then maintained with the 13.56 MHz rf power. Using this technique, large-volume (1000 cm{sup 3}), high electron density (on the order of 10{sup 11-12} cm{sup -3}), 760 Torr air and nitrogen plasmas have been created while rf power reflection is minimized during the entire plasma pulse utilizing a dynamic matching method. This plasma can project far away from the antenna region (30 cm), and the rf power budget is 5 W/cm{sup 3}. Temporal evolution of the plasma electron density and total electron-neutral collision frequency during the pulsed plasma is diagnosed using millimeter wave interferometry. Optical emission spectroscopy (OES) aided by SPECAIR, a special OES simulation program for air-constituent plasmas, is used to analyze the radiating species and thermodynamic characteristics of the plasma. Rotational and vibrational temperatures of 4400-4600{+-}100 K are obtained from the emission spectra from the N{sub 2}(2+) and N{sub 2}{sup +}(1-) transitions by matching the experimental spectrum results with the SPECAIR simulation results. Based on the relation between the electron collision frequency and the neutral density, utilizing millimeter wave interferometry, the electron temperature of the 760 Torr nitrogen plasma is found to be 8700{+-}100 K (0.75{+-}0.1 eV). Therefore, the plasma deviates significantly from local thermal equilibrium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Seeding magnetic fields for laser-driven flux compression in high-energy-density plasmas

A compact, self-contained magnetic-seed-field generator (5 to 16 T) is the enabling technology for a novel laser-driven flux-compression scheme in laser-driven targets. A magnetized target is directly irradiated by a kilojoule or megajoule laser to compress the preseeded magnetic field to thousands of teslas. A fast (300 ns), 80 kA current pulse delivered by a portable pulsed-power system is discharged into a low-mass coil that surrounds the laser target. A >15 T target field has been demonstrated using a <100 J capacitor bank, a laser-triggered switch, and a low-impedance (<1 {Omega}) strip line. The device has been integrated into a series of magnetic-flux-compression experiments on the 60 beam, 30 kJ OMEGA laser [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)]. The initial application is a novel magneto-inertial fusion approach [O. V. Gotchev et al., J. Fusion Energy 27, 25 (2008)] to inertial confinement fusion (ICF), where the amplified magnetic field can inhibit thermal conduction losses from the hot spot of a compressed target. This can lead to the ignition of massive shells imploded with low velocity--a way of reaching higher gains than is possible with conventional ICF.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Characterization and controllability of radiated power via extrinsic impurity seeding in strongly negative triangularity plasmas in DIII-D

Experiments with extrinsic impurity seeding in strongly negative triangularity shapes in DIII-D achieved radiated power fractions (relative to input power) of up to ≈85% total radiation and ≈55% core radiation in steady-operating conditions. The relationship between core and total radiation was sensitive to impurity species and input power. Attempts to reach higher radiation levels via higher impurity flows resulted in radiative collapse disruptions. Nitrogen, neon, argon, and krypton were tested. Injection was by gas puffing, usually controlled by feeding back real-time estimates for core or total radiating fractions ($P_\textrm{rad} / P_\textrm{input}$). Argon and krypton were controlled by feeding back total radiating fraction, whereas neon was controlled by feeding back the core radiating fraction, due to the lower efficiency of neon as a divertor radiator. Nitrogen flows were pre-programmed. Reasonable total $P_\textrm{rad}$ control target following was achieved with argon or krypton. Control was more challenging with the neon/core radiation configuration, which was more prone to slow response and overshooting of the control target. Poor particle removal contributed to the control challenge: neon particle inventory within the last closed flux surface was roughly constant for up to 1 s (the longest duration tested) after neon injection was halted. However, separate experiments with laser-blow off of non-recycling impurities measured a short impurity confinement time, on the scale of the energy confinement time of ∼100 ms. Modeling with the Aurora impurity transport simulation matched experimental neon density profiles with full recycling (R = 1.0) and weak pumping but predicted rapid decreases in neon inventory if pumping were increased or recycling decreased. This indicates that changes outside the confined plasma (adding a well-placed pump) would improve controllability for all highly recycling species.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Application of Laser Induced Breakdown in Air in Conjunction with Atomic Absorption Spectroscopy for Detection of Trace Elements in Fennel Seeds

A robust approach of laser-induced breakdown spectroscopy (LIBS) in ambient air has been employed to investigate concentration of the trace elements in fennel seeds (saunf) via generation of plasma through the second harmonic of solid state Nd: YAG pulsed laser 532 nm. Spectral emissions of saunf plasma were acquired with resolution of 0.06 nm in spectral range of 200–720 nm. The experimental determination showed the existence of elements namely, Ca, Al, K, Fe, S, P, Mg, Mn, Sr, Na, and Zn in the sample. However, no toxic elements such as Pb, Cr etc. were perceived. The relative concentrations of detected elements were measured through the intensity of the strongest peak, intensities of every emission from every specie, and calibration free (CF)-LIBS. To indorse the experimental determinations of LIBS, a comparative study was carried out with the outcomes of atomic absorption spectroscopy (AAS). The results of LIBS and AAS were compared by the statistical treatment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗