Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Rubin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Original structures, and fragmentation and reassembly histories of asteroids - Evidence from meteorites

The validity of an onion shell model (OSM) for chondrite parent asteroids was assessed using metallographic cooling rates (MCR) derived from the compositions of metallic Fe-Ni grains. The hypothesis evaluated was that the hottest materials in chondrites would have been buried the deepest and cooled the slowest. The survey covered breccia from regolith and 13 different chondrites. The MCRs agreed well with cooling rates predicted by fission-track thermometry and Ar-40/Ar-39 ages. The OSM predicts an inverse correlation between the cooling rate and the petrographic type. Low correlations found between the MCRs and petrographic type indicate that chondrite parent asteroids were not assembled with onion shell structures.

Taylor, G. Jeffrey↗

Performance boundaries for prioritized multiplexing systems

Systems in which many data sources are multiplexed over a single communication channel are considered. Data from all the sources are generated in fixed-length packets and are stored in a common buffer with finite capacity. Packets that overflowed or were removed from the buffer prior to transmission are lost. The system performance measure is the set of packet loss probabilities associated with the sources. Queueing disciplines vary depending on the stringency of prioritization and the utilization of the system resources. The set of all possible performances is characterized as the set of all queueing disciplines is spanned. Whether a given performance is possible can be deduced. Strategies that achieve the minimum overall loss probability are identified. The extreme disciplines are specified, and their performances are calculable by means of a given algorithm.

Clare, Loren P.↗

Diverse eucritic pebbles in the Vaca Muerta mesosiderite

Seven 5-cm basaltic pebbles from the Vaca Muerta mesosiderite were studied by neutron activation and electron microprobe analysis, and three additional pebbles were studied petrographically. The cumulate pebbles had low REE concentrations and high Eu/Sm ratios, indicating the absence of intercumulus liquid. Siderophile interelement ratios were similar to those found in Vaca Muerta metal except for anomalously low Ir concentrations. The presence of 20 percent impact-melt breccias among the pebbles and 35-40 percent melt breccias among the mesosiderite whole-rocks suggests that the mesosiderites were more extensively impact melted than the howardites. Three alternative models to explain this greater proportion of impact-melted material among the mesosiderites are proposed.

Rubin, Alan E.↗

Chondrules, matrix and coarse-grained chondrule rims in the Allende meteorite - Origin, interrelationships, and possible precursor components

INAA and broad-beam EMPA are used to determine the bulk compositions of 20 chondrules, 13 coarse-grained chondrule rims, and one nonporphyritic CV chondrule (NPCVC) from CV3 Allende (and of one NPCVC each from Leoville and Vigarano). The data are presented in extensive tables and graphs and analyzed in detail. Five probable chondrule precursor components are deduced, and the solar-nebula processes giving rise to them (and probably to the coarse-grained rims as well) are discussed. It is suggested that the formation of the rimmed chondrules involved nebular reheating in space, after the accretion of dusty coatings.

Rubin, Alan E.↗

Mechanisms of rolling contact spalling

The results of a study aimed at analyzing the mechanical material interactions responsible for rolling contact spalling of the 440 C steel, high pressure oxygen turbopump bearings are presented. A coupled temperature displacement finite element analysis of the effects of friction heating under the contact is presented. The contact is modelled as a stationary, heat generating, 2 dimensional indent in an elastic perfectly plastic half-space with heat fluxes up to 8.6 x 10000 KW/m sq comparable to those generated in the bearing. Local temperatures in excess of 1000 C are treated. The calculations reveal high levels of residual tension after the contact is unloaded and cools. Efforts to promote Mode 2/Mode 3 fatigue crack growth under cyclic torsion in hardened 440 C steel are described. Spalls produced on 440 C steel by a 3 ball/rod rolling contact testing machine were studied with scanning microscopy. The shapes of the cyclic, stress strain hysteresis loops displayed by hardened 440 C steel in cyclic torsion at room temperature are defined for the plastic strain amplitudes encountered in rolling/sliding contact. Results of these analyses are discussed in detail.

Kumar, A. M.↗

Consistent boundary conditions for Reduced Navier-Stokes (RNS) scheme applied to 3-dimensional internal viscous flows

A consistent and efficient set of boundary conditions is developed for the multi-sweep space-marching pressure-elliptic Reduced Navier-Stokes (RNS) scheme as applied for 3-D internal viscous flow problems. No-slip boundary conditions are directly imposed on the solid walls. There is no iteration procedure required in the cross plane to ensure mass conservation across each marching plane. The finite difference equations forming the coefficient matrix are ordered such that the surface normal velocity is specified on all the solid walls; unlike external flows, a pressure boundary condition in the cross plane is not required. Since continuity is directly satisfied at all points in the flow domain, the first order momentum equations can be solved directly for the pressure without the need for a Poisson pressure correction equation. The procedure developed herein can also be applied with periodic boundary conditions. The analysis is given for general compressible flows. Incompressible flow solutions are obtained, for straight and curved ducts of square cross section, to validate the procedure. These solutions are used to demonstrate the applicability of the RNS scheme, with the improved boundary conditions for internal flows with strong interaction, as would be encountered in ducts and turbomachinery geometries.

Reddy, D. R.↗

New type of primitive meteorite found in Antarcitca

A stony meteorite found in Antarctica in 1985, recently identified as a type of chondrite, probably represents material from a previously unsampled region of the solar system. Scientists are currently debating how the object formed. Preliminary results on Allan Hills 85085 (ALH85085) were presented.

Grossman, J. N.↗

Size-frequency distributions of EH3 chondrules

Size-frequency distributions of chondrules in three EH3 chondrites, namely Qingzhen, Kota-Kota and ALHA77156, are presently determined. Radial pyroxene chondrules are larger than cryptocrystalline chondrules, while nonporphyritic chondrules have a broader size-frequency distribution than the porphyritic, and porphyritic olivine-pyroxene chondrules are larger than porphyritic pyroxene chondrules. This last result is due to a reaction of fine-grained olivine with free silica to form pyroxene during mild thermal metamorphism of the whole-rocks.

Rubin, Alan E.↗

Consistent boundary conditions for reduced Navier-Stokes (RNS) scheme applied to three-dimensional internal viscous flows

Three-dimensional internal viscous flow problems are presently addressed by a consistent and efficient set of boundary conditions for the multisweep space-marching, pressure-elliptic Reduced Navier-Stokes scheme. Since continuity is by this means directly satisfied at all points in the flow domain, the first-order momentum equations are directly solvable for pressure without the requirement for a Poisson pressure-correction equation. Incompressible flow solutions are obtained for straight and curved ducts of square cross section, in order to validate the procedure. Usefulness is demonstrated for internal flows with strong interactions, as would be found in turbomachine geometries.

Reddy, D. R.↗

Determination of N/O from far-infrared line observations of Galactic H II regions

Measurements of the 52- and 88-micron forbidden O III line ratios and the 57-micron forbidden N III line ratio for six H II regions have been obtained with the NASA Kuiper Airborne Observatory. The derived N/O ratio for most Galactic regions (of about 0.2-0.3) is greater than that obtained by optical studies, and it exceeds the solar value. Although enhancement of N/O at a galactocentric distance of about 6 kpc may be possible, no evidence is found for an overall linear gradient in N/O with galactocentric distance, suggesting that N-14 is predominantly produced by primary rather than secondary nucleosynthesis.

Rubin, R. H.↗

Chondrules and matrix in the Ornans CO3 meteorite - Possible precursor components

Bulk compositions of 17 chondrules and one sample of matrix from CO3 Ornans were determined by instrumental neutron activation analysis. Chondrule precursor components deduced from chondrule compositions are characterized by: (1) common and slightly volatile siderophiles, Cr and chalcophiles, (2) refractory lithophiles and Na, (3) Mn, Si and modal pyroxene, and (4) FeO and olivine. Component 4 may be closely related to matrix material. Precursor components have now been inferred for OC, EH, CV, CM and CO chondrules. An MN- and Si-rich component occurs exclusively among carbonaceous chondrite chondrules. Although there are significant intergroup differences, common to chondrules in all chondrite groups are refractory-lithophile-rich, common-siderophile-rich, and (with the exception of EH) common-lithophile-rich components. This indicates that the siderophile/lithophile and refractory lithophile/common lithophile fractionations recorded in chondrite whole-rocks were established prior to chondrule formation at all nebular locations.

Rubin, Alan E.↗

Intent inferencing with a model-based operator's associate

A portion of the Operator Function Model Expert System (OFMspert) research project is described. OFMspert is an architecture for an intelligent operator's associate or assistant that can aid the human operator of a complex, dynamic system. Intelligent aiding requires both understanding and control. The understanding (i.e., intent inferencing) ability of the operator's associate is discussed. Understanding or intent inferencing requires a model of the human operator; the usefulness of an intelligent aid depends directly on the fidelity and completeness of its underlying model. The model chosen for this research is the operator function model (OFM). The OFM represents operator functions, subfunctions, tasks, and actions as a heterarchic-hierarchic network of finite state automata, where the arcs in the network are system triggering events. The OFM provides the structure for intent inferencing in that operator functions and subfunctions correspond to likely operator goals and plans. A blackboard system similar to that of Human Associative Processor (HASP) is proposed as the implementation of intent inferencing function. This system postulates operator intentions based on current system state and attempts to interpret observed operator actions in light of these hypothesized intentions.

Jones, Patricia M.↗

Evaluation of the Portable Instantaneous Display Analysis Spectrometer (PIDAS)

The Portable Instantaneous Display Analysis System (PIDAS) was evaluated by measuring 125 spectra of mineral specimens and rock samples under the following conditions: in the laboratory under artificial illumination and outdoors, on the building patio, while still using the line voltage electric power supplies. The PIDAS was compared and contrasted with the GEOSCAN PFS, Daedalus-Spectrafax 440, and the Geophysical Environmental Research (GER) IRIS Mark 4.

Lyon, R. J. P.↗

Transonic flow solutions using a composite velocity procedure for potential, Euler and RNS equations

Solutions for transonic viscous and inviscid flows using a composite velocity procedure are presented. The velocity components of the compressible flow equations are written in terms of a multiplicative composite consisting of a viscous or rotational velocity and an inviscid, irrotational, potential-like function. This provides for an efficient solution procedure that is locally representative of both asymptotic inviscid and boundary layer theories. A modified conservative form of the axial momentum equation that is required to obtain rotational solutions in the inviscid region is presented and a combined conservation/nonconservation form is applied for evaluation of the reduced Navier-Stokes (RNS), Euler and potential equations. A variety of results is presented and the effects of the approximations on entropy production, shock capturing, and viscous interaction are discussed.

Gordnier, R. E.↗

OFMspert - Inference of operator intentions in supervisory control using a blackboard architecture

The authors proposes an architecture for an expert system that can function as an operator's associate in the supervisory control of a complex dynamic system. Called OFMspert (operator function model (OFM) expert system), the architecture uses the operator function modeling methodology as the basis for the design. The authors put emphasis on the understanding capabilities, i.e., the intent referencing property, of an operator's associate. The authors define the generic structure of OFMspert, particularly those features that support intent inferencing. They also describe the implementation and validation of OFMspert in GT-MSOCC (Georgia Tech-Multisatellite Operations Control Center), a laboratory domain designed to support research in human-computer interaction and decision aiding in complex, dynamic systems.

Jones, Patricia S.↗

ALH85085 - A unique volatile-poor carbonaceous chondrite with possible implications for nebular fractionation processes

The characteristics and possible origin of the chondrite ALH85085 are discussed. It is found that the metal silicate, and sulfide compositions of ALH85085 are similar to those in CM-CO and Al Rais-Renazzo chondrites. High siderophile abundances and volatile depletion are observed. It is found that ALH85085 agglomerated when temperatures in the nebula were near 1000 K, in the same region where Renazzo, Al Rais, and the CI chondrites formed. It is suggested that ALH85085 was annealed and lightly shocked after agglomeration. C1 and other clasts were subsequently incorporated during late-stage brecciation.

Grossman, Jeffrey N.↗

Chondrules in the Sharps H3 chondrite - Evidence for intergroup compositional differences among ordinary chondrite chondrules

Bulk compositions of 19 chondrules and one matrix-rich sample from H3.4 Sharps were determined by instrumental neutron activation analysis. Samples were characterized petrographically, and mineral compositions were determined by electron microprobe analysis. There is constancy among ordinary chondrite (OC) groups in the compositional interrelationships of different chondrule types; e.g., in H3 as well as L3 and LL3 chondrites, porphyritic chondrules are more refractory than nonporphyritic chondrules. Precursor components of H3 chondrules are closely related to those of LL3 chondrules. The mean Ir/Ni, Ir/Co, and Ir/Au ratios of H3 chondrules differ from the corresponding ratios of LL3 chondrules at the 99, 90, and 79 percent confidence levels, respectively. The ratios in H3 chondrules exceed those in LL3 chondrules by amounts similar to those by which H whole-rocks exceed LL whole-rocks. These data suggest that there are primary systematic differences in bulk composition between H and LL chondrules. These differences support the inference that chondrule formation occurred after major nebular fractionation events had established the observed bulk compositional differences among OC groups.

Rubin, Alan E.↗

Shock effects in meteorites

The impacts that can occur between objects on intersecting solar system orbits can generate shock-induced deformations and transformations, creating new mineral phases or melting old ones. These shock-metamorphic effects affect not only the petrography but the chemical and isotopic properties and the ages of primordial meteoritic materials. A fuller understanding of shock metamorphism and breccia formation in meteorites will be essential not only in the study of early accretion, differentiation, and regolith-evolution processes, but in the characterization of the primordial composition of the accreted material itself.

Stoeffler, D.↗