Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Recrystallization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Influence of Annealing in Freon on the Crystalline Structure of Cadmium-Telluride Layers and the Efficiency of Thin-Film Solar Cells on Their Basis

Solar cells (SCs) based on cadmium-telluride base layers, obtained by thermal evaporation and closed-space sublimation (CSS), are investigated. The base layers are activated via annealing in Freon. Structural and morphological studies are carried out to compare the recrystallization processes occurring during annealing in CdTе layers fabricated by different methods. The output parameters and light diode characteristics of the SCs are investigated, and the possibility of applying Freon annealing in the commercial production technology of thin-film CdS/CdTе SCs with base layers formed by thermal vacuum evaporation is analyzed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of the Optical Properties of Plastically Deformed ZnS(O) Using Band-Anticrossing Theory

The cathodoluminescence and absorption of plastically deformed ZnS(O) single crystals are investigated in the light of band-anticrossing theory. The difference in the oxygen content in the surface layer and in the sample bulk is found using a scanning electron microscope and according to cathodoluminescence data. This fact explains the specifics of the spectral position of the fundamental absorption edge and exciton spectra. The shift dynamics of the bands of self-activated luminescence on deep A centers (SA luminescence) during deformation recrystallization with an increase in the dissolved oxygen concentration is presented. Restriction of the spectral range of the appearance of self-activated luminescence at shallow levels—“edge” luminescence—is established. The nature of the emission bands in the wavelength ranges of 336–350 and 364–390 nm is established. These results refine the energy model of ZnS(O) crystals and can be useful in the case of the practical use of their structure-sensitive properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Effect of Bismuth on the Structural Perfection and the Luminescent Properties of Thin-Film Elastically Stressed Al{sub x}In{sub y}Ga{sub 1–x–y}Bi{sub z}Sb{sub 1–z}/GaSb Heterostructures

The effect of bismuth on the structural perfection and the luminescent properties of Al{sub x}In{sub y}Ga{sub 1–x–y}Bi{sub z}Sb{sub 1–z}/GaSb heterostructures has been studied. The optimal parameters of the process of zone recrystallization with temperature gradient at which epitaxial AlInGaBiSb layers have the minimum roughness and high structural perfection have been revealed: temperature gradient 1 ≤ G ≤ 30 K/cm, the liquid zone thickness 60 ≤ l ≤ 100 μm, the temperature range 773 K ≤ T ≤ 873 K, and bismuth concentration 0.3–0.4 mol fraction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Influence of Film Thickness on Annealing-Induced Grain Growth in Pt Films

Pt films with thickness h = 20–100 nm deposited on oxidized с-Si(100) substrate have been subjected to vacuum annealing at 500°C for 1 h, which resulted in recrystallization and growth of grains. Simultaneously with the normal growth of grains, abnormal grain growth has been observed, as a result of which the grains have separated in normal and secondary grains. For h = 20–40 nm, the secondary grains become much larger than the normal ones and the grain lateral size distribution therefore becomes bimodal. It has been shown that the abnormal grain growth rate increases with decreasing h, whereas the normal grain growth rate is independent of h. From the Pt(111) and Pt(222) X-ray diffraction peaks analysis it follows that the mean size D of coherently diffracting domains increases as a result of annealing. In the annealed films, D sublinearly grows with h, whereas in the as-prepared films, D grows linearly.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Evolution of the Microstructure and System of Ti{sub 3}Ni{sub 4} Particles upon Heat Treatments of a Ti−50.9 at % Ni Nanocrystalline Alloy

The structure of a Ti−(50.9 at % Ni) nanocrystalline alloy is studied by transmission electron microscopy after annealing at 300−500°C. It is found that B2-TiNi solid solution decomposition according to a heterogeneous mechanism with formation of Ti{sub 3}Ni{sub 4} particles develops in the subgrain structure and is suppressed in nanograins. The regularities of recovery, polygonization, and recrystallization in the grain/subgrain structure of a nanocrystalline TiNi alloy are established and their interconnection with processes of dissolution and coagulation of Ti{sub 3}Ni{sub 4} particles is identified.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural Transformations in Iron Borate under High-Temperature Annealing

Scanning electron microscopy and X-ray diffractometry are used to study surface morphology and crystal structure of iron borate FeBO{sub 3} annealed at different temperatures. Temperature limits of the structural stability are determined. It is shown that recrystallization to iron orthoborate Fe{sub 3}BO{sub 6} and hematite α-Fe{sub 2}O{sub 3} takes places at temperatures of 800–900°C and above 900°C, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of the Temperature of Straining in a Bridgman Chamber on Peculiarities of the Defect Structure Formation in Commercial-Grade Titanium

Transmission electron microscopy data showed evidence of the formation of structural regions corresponding to deformation (dislocated) fragments and dynamically recrystallized grains in α-phase titanium upon torsion at high hydrostatic pressure at room and cryogenic temperatures. It is shown that the previously proposed “two-phase mixture” model is applicable to description of these defect structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

AlInPSbAs/InAs Heterostructures for Thermophotoelectric Converters

Using the method of floating-zone recrystallization with a temperature gradient, AlInPSbAs/InAs heterostructures for thermophotoelectric converters operating in the wavelength range of 500–3200 nm are obtained. The use of the AlInPSbAs quinary solid solutions as an active region thermophotoconverters allows one to increase the external quantum yield up to 0.9 in the spectral range of 520–2800 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Substructural-Phase Transformations during Heat Treatments of the Ti–50.9 at % Ni Nanocrystalline Alloy

The method of transmission electron microscopy is used to study the grain-subgrain structure of the Ti–50.9 at % Ni nanocrystalline alloy after heat treatments at 300–500°C. It is found that the decomposition of the B{sub 2} solid solution of TiNi by the heterogeneous mechanism occurs in the subgrain structure, while the Ti{sub 3}Ni{sub 4} particles are not observed in nanograins. The features of the recovery and recrystallization of the alloy and their relationship with the processes of dissolution and precipitation of Ti{sub 3}Ni{sub 4} particles are revealed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Direct Observation of Austenitization in 1005 C-Mn Steel during Continuous Heating Using In Situ Synchrotron X-Ray Diffraction

The austenitization ( ) transformation in a 1005 C-Mn steel is monitored in real time at continuous heating rates between 1 C/sec to 10 C/sec using in situ synchrotron x-ray diffraction. Both dilatometry and the in situ x-ray diffraction experiments show that the austenitization transformation proceeds through multiple mechanisms from initiation through completion. Unlike the dilatometry experiments, the in situ x-ray diffraction experiments provide direct evidence for the phases present at specific times during the transformation. Thus, experimental validation is provided for models based on the differing kinetics of the austenitization transformation starting from a heterogeneous microstructure containing pearlite and ferrite. Beginning at temperatures below the A1 transformation temperature, the starting microstructure undergoes a recovery and recrystallization process to relieve stress imparted during the initial thermomechanical treatment of the steel. The austenitization transformation follows, beginning at temperatures above the A1 temperature, with the initial transformation proceeding as the pearlite in the microstructure is dissolved and high carbon concentration austenite is formed. Since the carbon present in the steel is localized near the original pearlite colonies, there is a pronounced heating rate dependant delay before the remaining ferrite grains begin to transform. As temperatures reach 850 C at all heating rates, the remaining ferrite transforms to austenite, since the equilibrium phase diagram indicates that higher temperatures are required to drive the transformation at these lower carbon concentrations. The transformation reaches completion at temperatures above the A3 temperature, and the last ferrite to be transformed is nearly pure iron.

36 MATERIALS SCIENCE↗

Processing and mechanical properties - 2016-0032

Hot extrusion is used within the forming route of cladding tubes to deform the billets into tube hollows, which are then cold-rolled to produce the final tubes with the suitable properties for in-reactor use. The hot extrusion goals are to give the appropriate geometry for cold pilgering (diameter and wall thickness suitable for cold-rolling mills, good concentricity) without surface defects and microstructural heterogeneities, which are detrimental for subsequent rolling. To ensure a good quality of the tube hollows, extrusion parameters (e.g., temperature of the billet, ram speed, extrusion ratio, lubrication) and extrusion tools have to be chosen as a function of the press capacity and mechanical and microstructural properties of the extruded alloy. For this purpose, finite-element and analytical models are used in addition to experimental tests. These models, particularly the former, can take into account the thermomechanical coupling that occurs in the tube and the tools during extrusion and provides a good prediction of the extrusion pressure and thermomechanical history of the extruded product. Together with a microstructural evolution model identified with small-scale extrusion tests, torsion tests, and heat treatments, this last result can also be used to calculate the fragmentation of the microstructure in the die and the meta-dynamic recrystallization after extrusion. Once validated against experimental data, numerical models were used to better understand and master the extrusion loads, the microstructure evolutions at the front end of the extruded tubes, and the temperature and stresses applied to the tools. (authors)

36 MATERIALS SCIENCE↗

Effects of Time, Heat, and Oxygen on K Basin Sludge Agglomeration, Strength, and Solids Volume

Sludge disposition will be managed in two phases under the K Basin Sludge Treatment Project. The first phase is to retrieve the sludge that currently resides in engineered containers in the K West (KW) Basin pool at ~10 to 18°C. The second phase is to retrieve the sludge from interim storage in the sludge transport and storage containers (STSCs) and treat and package it in preparation for eventual shipment to the Waste Isolation Pilot Plant. The work described in this report was conducted to gain insight into how sludge may change during long-term containerized storage in the STSCs. To accelerate potential physical and chemical changes, the tests were performed at temperatures and oxygen partial pressures significantly greater than those expected in the T Plant canyon cells where the STSCs will be stored. Tests were conducted to determine the effects of 50°C oxygenated water exposure on settled quiescent uraninite (UO2) slurry and a full simulant of KW containerized sludge to determine the effects of oxygen and heat on the composition and mechanical properties of sludge. Shear-strength measurements by vane rheometry also were conducted for UO2 slurry, mixtures of UO2 and metaschoepite (UO3•2H2O), and for simulated KW containerized sludge. The results from these tests and related previous tests are compared to determine whether the settled solids in the K Basin sludge materials change in volume because of oxidation of UO2 by dissolved atmospheric oxygen to form metaschoepite. The test results also are compared to determine if heating or other factors alter sludge volumes and to determine the effects of sludge composition and settling times on sludge shear strength. It has been estimated that the sludge volume will increase with time because of a uranium metal → uraninite → metaschoepite oxidation sequence. This increase could increase the number of containers required for storage and increase overall costs of sludge management activities. However, the volume might decrease because of decreases in the water-volume fraction caused by sludge solid reactions, compaction, or intergrowth and recrystallization of metaschoepite. In that case, fewer STSCs may be needed, but the shear strength would increase, and this could challenge recovery by water jet erosion and require more aggressive retrieval methods. Overall, the tests described herein indicate that the settled solids volume remains the same or decreases with time. The only case for which the sludge solids volumes increase with time is for the expansion factor attendant upon the anoxic corrosion of uranium metal to produce UO2 and subsequent reaction with oxygen to form equimolar UO2.25 and UO3•2H2O.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fundamental Mechanisms Driving the Amorphous to Crystalline Phase Transformation

Phase transformations are ubiquitous, fundamental phenomena that lie at the heart of many structural, optical and electronic properties in condensed matter physics and materials science. Many transformations, especially those occurring under extreme conditions such as rapid changes in the thermodynamic state, are controlled by poorly understood processes involving the nucleation and quenching of metastable phases. Typically these processes occur on time and length scales invisible to most experimental techniques ({micro}s and faster, nm and smaller), so our understanding of the dynamics tends to be very limited and indirect, often relying on simulations combined with experimental study of the ''time infinity'' end state. Experimental techniques that can directly probe phase transformations on their proper time and length scales are therefore key to providing fundamental insights into the whole area of transformation physics and materials science. LLNL possesses a unique dynamic transmission electron microscope (DTEM) capable of taking images and diffraction patterns of laser-driven material processes with resolution measured in nanometers and nanoseconds. The DTEM has previously used time-resolved diffraction patterns to quantitatively study phase transformations that are orders of magnitude too fast for conventional in situ TEM. More recently the microscope has demonstrated the ability to directly image a reaction front moving at {approx}13 nm/ns and the nucleation of a new phase behind that front. Certain compound semiconductor phase change materials, such as Ge{sub 2}Sb{sub 2}Te{sub 5} (GST), Sb{sub 2}Te and GeSb, exhibit a technologically important series of transformations on scales that fall neatly into the performance specifications of the DTEM. If a small portion of such material is heated above its melting point and then rapidly cooled, it quenches into an amorphous state. Heating again with a less intense pulse leads to recrystallization into a vacancy-stabilized metastable rock salt structure. Each transformation takes {approx}10-100 ns, and the cycle can be driven repeatedly a very large number of times with a nanosecond laser such as the DTEM's sample drive laser. These materials are widely used in optical storage devices such as rewritable CDs and DVDs, and they are also applied in a novel solid state memory technology - phase change memory (PCM). PCM has the potential to produce nonvolatile memory systems with high speed, extreme density, and very low power requirements. For PCM applications several materials properties are of great importance: the resistivities of both phases, the crystallization temperature, the melting point, the crystallization speed, reversibility (number of phase-transformation cycles without degradation) and stability against crystallization at elevated temperature. For a viable technology, all these properties need to have good scaling behavior, as dimensions of the memory cells will shrink with every generation. In this LDRD project, we used the unique single-shot nanosecond in situ experimentation capabilities of the DTEM to watch these transformations in GST on the time and length scales most relevant for device applications. Interpretation of the results was performed in conjunction with atomistic and finite-element computations. Samples were provided by collaborators at IBM and Stanford University. We observed, and measured the kinetics of, the amorphous-crystalline and melting-solidification transitions in uniform thin-film samples. Above a certain threshold, the crystal nucleation rate was found to be enormously high (with many nuclei appearing per cubic {micro}m even after nanosecond-scale incubation times), in agreement with atomistic simulation and consistent with an extremely low nucleation barrier. We developed data reduction techniques based on principal component analysis (PCA), revealing the complex, multi-dimensional evolution of the material while suppressing noise and irrelevant information. Using a novel specimen geometry, we also achieved repeated switching between the amorphous and crystalline phases enabling in situ study of structural change after phase cycling, which is relevant to device performance. We also observed the coupling between the phase transformations and the evolution of morphology on the nanometer scale, revealing the gradual development of striations in uniform films and preferential melting at sharp edges in laser-heated nanopatterned GST. This nonuniform melting, interpreted through simulation as being a direct result of geometrical laser absorption effects, appears to be responsible for a marked loss in morphological stability even at moderate laser intensities and may be an important factor in the longevity of nanostructured phase change materials in memory applications.

36 MATERIALS SCIENCE↗

Dual and Triple Ion-Beam Irradiations of Fe, Fe(Cr) and Fe(Cr)-ODS (Final Report: IAEA SMoRE CRP)

Structures of nanoparticles in Fe-16Cr-4.5Al-0.3Ti-2W-0.37Y2O3 (K3) and Fe-20Cr-4.5Al-0.34Ti-0.5Y2O3 (MA956) oxide dispersion strengthened (ODS) ferritic steels produced by mechanical alloying (MA) and followed by hot extrusion have been studied using high-resolution transmission electron microscopy (HRTEM) techniques to gain insight about the formation mechanism of nanoparticles in MA/ODS steels. The observations of Y-Al-O complex-oxide nanoparticles in both ODS steels imply that decomposition of Y2O3 in association with internal oxidation of Al occurred during mechanical alloying. While the majority of oxide nanoparticles formed in both steels is Y4Al2O9, a few oxide particles of YAlO3 are also occasionally observed. These results reveal that Ti (0.3 wt %) plays an insignificant role in forming oxide nanoparticles in the presence of Al (4.5 wt %). HRTEM observations of crystalline nanoparticles larger than ~2 nm and amorphous or disordered cluster domains smaller than ~2 nm provide an insight into the formation mechanism of oxide nanoparticle in MA/ODS steels, which we believe from our observations involves a solid-state amorphous precursor followed by recrystallization. Dual ion-beam irradiations using He + +Fe +8 ions were employed to gain more detailed insight about the role of nanoparticles in suppressing radiation-induced swelling. This is elaborated through TEM examinations of cavity distributions in ion-irradiated Fe-14Cr and K3-ODS ferritic steels. HRTEM observations of helium-filled cavities (helium bubbles) preferably trapped at nanoscale oxide particles and clusters in ion-irradiated K3-ODS are presented. Finally, we describe the results from triple ion-beam irradiations using He + +Fe +8 ions to emulate fusion first wall radiation effects. Preliminary work is reported that confirms the existence of significant hydrogen synergistic effects described earlier by Tanaka et al., for Fe(Cr) and by Wakai et al., for F82H reduced activation ferritic martensitic (RAF/M) steel. These previous results combined with our data suggest a complex new 'catalytic' mechanism whereby H interacts with the steady state population of defects and the embryonic cavities so as to accelerated cavity (void) growth in both Fe(Cr) and under special conditions in ODS steels.

36 MATERIALS SCIENCE↗

Report on Sodium Compatibility of Advanced Structural Materials

This report provides an update on the evaluation of sodium structural materials. The report is a deliverable (level 3) in FY11 (M3A11AN04030403), under the Work Package A-11AN040304, “Sodium Compatibility of Advanced Structural Materials” performed by Argonne National Laboratory (ANL), as part of Advanced Structural Materials Program for the Advanced Reactor Concepts. This work package supports the advanced structural materials development by providing corrosion and tensile data from the standpoint of sodium compatibility of advanced structural alloys. The scope of work involves exposure of advanced structural alloys such as G92, mod.9Cr-1Mo (G91) ferritic-martensitic steels and HT-UPS austenitic stainless steels to a flowing sodium environment with controlled impurity concentrations. The exposed specimens are analyzed for their corrosion performance, microstructural changes, and tensile behavior. Previous reports examined the thermodynamic and kinetic factors involved in the design, fabrication, and construction of a forced convection sodium loop for sodium compatibility studies of advanced materials. This report presents the results on corrosion performance, microstructure, and tensile properties of advanced ferritic-martensitic and austenitic alloys exposed to liquid sodium at 550°C for up to 2700 h and at 650°C for up to 5064 h in the forced convection sodium loop. The oxygen content of sodium was controlled by the cold-trapping method to achieve ~1 wppm oxygen level. Four alloys were examined, G92 in the normalized and tempered condition (H1 G92), G92 in the cold-rolled condition (H2 G92), G91 in the normalized and tempered condition, and hot-rolled HT-UPS. G91 was included as a reference to compare with advanced alloy, G92. It was found that all four alloys showed weight loss after sodium exposures at 550 and 650°C. The weight loss of the four alloys was comparable after sodium exposures at 550°C; the weight loss of ferritic-martensitic steels, G92 and G91 is more significant than that of austenitic stainless steel, HT-UPS after sodium exposures at 650°C. Sodium exposures up to 2700 h at 550°C had no significant influence on tensile properties, while sodium exposures up to 5064 h at 650°C dramatically lowered the tensile strengths of the four alloys. The ultimate tensile strength of H1 G92, H2 G92, and G91 ferritic-martensitic steels was reduced to as much as nearly half of its initial value after sodium exposures at 650°C. Though the uniform elongation was recovered to some extent, these three ferritic-martensitic steels showed considerable strain softening after sodium exposures. The yield stress of HT-UPS austenitic stainless steel increased, the ultimate tensile strength decreased, and the total elongation was reduced after sodium exposures at 650°C. The dynamic strain aging effect observed in the as-received HT-UPS specimens became less pronounced after sodium exposures at 650°C. Microstructural characterization of sodium-exposed specimens showed no appreciable surface deterioration or grain structure changes under an optical microscope, except for the H2 G92 steel, in which the martensite structure transformed to large grain ferrite after sodium exposures at 650°C. TEM observations of the sodium-exposed H2 G92 steel showed significant recrystallization after sodium exposure for 2700 h at 550°C, and transformation of martensite to ferrite and high density of precipitates in nearly dislocation-free matrix after sodium exposures at 650°C. Further microstructural analysis and evaluation of decarburization/carburization behavior is needed to understand the dramatic changes in the tensile strengths of advanced ferritic-martensitic and austenitic steels after sodium exposures at 650°C.

36 MATERIALS SCIENCE↗

Neutron Diffraction Measurement of Residual Stresses, Dislocation Density and Texture in Zr-bonded U-10Mo ''Mini'' Fuel Foils and Plates

Aluminum clad monolithic uranium 10 weight percent molybdenum (U-10Mo) fuel plates are being considered for conversion of several research and test nuclear reactors from high-enriched to low-enriched uranium fuel due to the inherently high density of fissile material. Comprehensive neutron diffraction measurements of the evolution of the textures, residual phase stresses, and dislocation densities in the individual phases of the mini-foils throughout several processing steps and following hot-isostatic pressing to the Al cladding, have been completed. Recovery and recrystallization of the bare U-10Mo fuel foil, as indicated by the dislocation density and texture, are observed depending on the state of the material prior to annealing and the duration and temperature of the annealing process. In general, the HIP procedure significantly reduces the dislocation density, but the final state of the clad plate, both texture and dislocation density, depends strongly on the final processing step of the fuel foil. In contrast, the residual stresses in the clad fuel plate do not depend strongly on the final processing step of the bare foil prior to HIP bonding. Rather, the residual stresses are dominated by the thermal expansion mismatch of the constituent materials of the fuel plate.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Characterization of Tubing from Advanced ODS alloy (FCRD-NFA1)

Fabrication methods are being developed and tested for producing fuel clad tubing of the advanced ODS 14YWT and FCRD-NFA1 ferritic alloys. Three fabrication methods were based on plastically deforming a machined thick-wall tube sample of the ODS alloys by pilgering, hydrostatic extrusion or drawing to decrease the outer diameter and wall thickness and increase the length of the final tube. The fourth fabrication method consisted of the additive manufacturing approach involving solid-state spray deposition (SSSD) of ball milled and annealed powder of 14YWT for producing thin-wall tubes. Of the four fabrication methods, two methods were successful at producing tubing for further characterization: production of tubing by high-velocity oxy-fuel spray forming and production of tubing using high-temperature hydrostatic extrusion. The characterization described shows through neutron diffraction the texture produced during extrusion while maintaining the beneficial oxide dispersion. In this research, the parameters for innovative thermal spray deposition and hot extrusion processing methods have been developed to produce the final nanostructured ferritic alloy (NFA) tubes having approximately 0.5 mm wall thickness. Effect of different processing routes on texture and grain boundary characteristics has been investigated. It was found that hydrostatic extrusion results in combination of plane strain and shear deformations which generate rolling textures of α- and γ-fibers on {001}<110> and {111}<110> together with a shear texture of ζ-fiber on {011}<211> and {011}<011>. On the other hand, multi-step plane strain deformation in cross directions leads to a strong rolling textures of θ- and ε-fiber on {001}<110> together with weak γ-fiber on {111}<112>. Even though the amount of the equivalent strain is similar, shear deformation leads to much lower texture indexes compared to the plane strain deformations. Moreover, while 50% of hot rolling brings about a large number of high-angle grain boundaries (HAB), 44% of shear deformation results in large amount of low-angle boundaries (LAB) showing the incomplete recrystallization.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Evaluation of Erosion of the Dummy “EE” Plate 19 in YA Type ATR Fuel Element During Reactor PALM Cycles

Advanced Test Reactor (ATR) Cycle 153B-1 was a 14-day, high-power, powered axial locator mechanism (PALM) operating cycle that completed on April 12, 2013. Cycle 153B-1 was a typical operating cycle for the ATR, and did not result in any unusual plant transients. ATR was started up and shut down as scheduled. The PALM drive physically moves the selected experiments into and out of the core to simulate reactor startup and heat up, and shutdown and cooldown transients, while the reactor remains in steady-state conditions. However, after the cycle was over, when the fuel elements were removed from the core and inspected, several thousand flow-assisted erosion pits and “horseshoeing” defects were readily observed on the surface of the several YA-type fuel elements (these are aluminum “dummy” plates that contain no fuel). In order to understand these erosion phenomena, a thermal-hydraulic model of coolant channel 20 on a YA-M fuel element was generated. The boundaries of the model were the aluminum EE plate of a YA-M fuel element and a beryllium reflector block with 13 horizontal saw cuts which represented regions of zero flow. The heat generated in fuel plates 1 through 18 was modeled to be passing through the aluminum EE plate. The coolant channel 20 width was set at 0.058 in. (58 mils). It was established that the horizontal saw cuts had a significant effect on the temperature of the coolant. The flow, which was expected to vary linearly with gradual heating of the coolant as it passed through the channel, was extremely turbulent. The temperature rise, which was expected to be a smooth “S” curve, was represented by a series temperature rise “humps,” which occurred at each horizontal saw cut in the beryllium reflector block. Each of the 13 saw cuts had a chamfered edge which resulted in the coolant flow being re-directed as a jet across the coolant channel into the surface of the EE plate, which explained the temperature rise and the observed scalloping and pitting degradation on the YA-M fuel elements. In the case of scalloping (horseshoeing) a surprising similarity of that defect to those appearing on aluminum plate rolled in over-lubrication conditions, were established. In turn, this made us think that the principal feature responsible for the appearance of these defects, was horizontal cuts in the beryllium reflector block created to arrest the propagation of large vertical crack(s) in Be in PALM cycles with higher overall fluence. This assumption was fully confirmed by the results of thermo-hydraulic simulations. The neutronics data for these modeling experiments were provided using advanced irradiation simulations (MCNP, HELIOS). In the case of pitting erosion the following corrective measures were proposed based upon the results of JMatPro v.8.2 modeling (TTT- and CCT-diagrams): change the fabrication process by adding blister anneal before program anneal, immediately after cold rolling of AA6061plate. This step will allow achieving complete recrystallization, eliminating of strengthening due to metastable precipitates, and reduce the possibility of forming sharp microstructural features upon the surface.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗