Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Raman Spectroscopic In Situ Monitoring of Highly Turbid Media

The ability to run chemical processing more efficiently and cost effectively is a need that spans critical materials recovery and legacy nuclear waste cleanup. Sensors integrated to provide online monitoring are essential to addressing this need by providing near-real time feedback on process conditions, which can improve efficiency, aid in decision making, and reduce the need for grab sample measurements. Optical spectroscopy is well-suited for providing online chemical composition information and has been widely applied in varied chemical systems. However, applications in turbid matrices continue to represent substantial challenges to sensor performance, where absorption or scattering of excitation light can cause significant signal interference. Here, in this study, close-focus Raman probes are investigated for use in turbid media as a way to overcome the signal loss from the scattering of the Raman excitation source. This, paired with advanced data science techniques, allowed for the development of chemometric models for the accurate quantification of several analytes of interest (NO 3 – , NO 2 – , and PO 4 3– ) in highly turbid solutions with solids loadings of up to 20 wt %. This work focuses on offline sample measurement and characterization as an initial step toward the development of online monitoring capabilities. Chemical systems of interest were focused on nuclear waste at the Hanford Site, which represents highly complex matrices that could realize significant processing benefits through the integration of online monitoring.

Felmy, Heather M. [Pacific Northwest National Labo↗
NASA NTRS2013

Refinement of the Robert-Bonamy Formalism: Considering Effects from the Line Coupling

Since it was developed in 1979, the Robert-Bonamy (RB) formalism has been widely used in calculating pressure broadened half-widths and induced shifts for many molecular systems. However, this formalism contains several approximations whose applicability has not been thoroughly justified. One of them is that lines of interest are well isolated. When these authors developed the formalism, they have relied on this assumption twice. First, in calculating the spectral density F(ω), they have only considered the diagonal matrix elements of the relaxation operator. Due to this simplification, effects from the line mixing are ignored. Second, when they applied the linked cluster theorem to remove the cutoff, they have assumed the matrix elements of the operator exp(-iS(sub 1) - S(sub 2)) can be replaced by the exponential of the matrix elements of -iS(sub 1) - S(sub 2). With this replacement, effects from the line coupling are also ignored. Although both these two simplifications relied on the same approximation, their validity criteria are completely different and the latter is more stringent than the former. As a result, in many cases where the line mixing becomes negligible, significant effects from the line coupling have been completely missed. In the present study, we have developed a new method to evaluate the matrix elements of exp(-iS(sub 1) - S(sub 2)) and have refined the RB formalism such that line coupling can be taken into account. Our numerical calculations of the half-widths for Raman Q lines of the N(sub 2)-N(sub 2) pair have demonstrated that effects from the line coupling are important. In comparison with values derived from the RB formalism, new calculated values for these lines are significantly reduced. A recent study has shown that in comparison with the measurements and the most accurate close coupling calculations, the RB formalism overestimates the half-widths by a large amount. As a result, the refinement of the RB formalism goes in the right direction and these new calculated half-widths become closer to the "true" values.

spectra↗
DOE OSTI2018

Spark plasma sintering preparation of reference targets for field spectroscopy on Mars

We propose spark plasma sintering (SPS) as a technique to prepare reference targets for Raman and other spectroscopy instruments involved in future space missions and more generally in–field work. We have tested the effect of SPS on different international standards that are available in the form of minerals and rocks powders. Advantages and potential issues of SPS were considered by analyzing the Raman signal and mechanical properties of the sintered targets. The shape is well controlled; the rupture toughness is enhanced, and the homogeneous distribution of the mineral phases is verified. In conclusion, a suite of calibration targets has thus been implemented for the SuperCam instrument on the National Aeronautics and Space Administration Mars 2020 rover, and SPS may be preferred for future missions as well.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2017

Effective suppression of parametric instabilities with decoupled broadband lasers in plasma

A theoretical assessment for the stimulated Raman scattering (SRS) instability driven by two laser beams with a certain frequency difference is introduced. It is found that strong coupling and enhanced SRS take place only when the unstable regions corresponding to the two beams are overlapped in the wavenumber space. Thus, a threshold of the beam frequency difference for their decoupling is found as a function of their intensity and plasma density. Based upon this, a strategy to suppress the SRS instability with decoupled broadband lasers (DBLs) is proposed. A DBL can be composed of tens or even hundreds of beamlets, where the beamlets are distributed uniformly in a broad spectrum range such as over 10% of the central frequency. Decoupling among the beamlets is found due to the limited beamlet energy and suitable frequency difference between neighboring beamlets. Particle-in-cell simulations demonstrate that SRS can be almost completely suppressed with DBLs at the laser intensity of ~10 15 W/cm 2 . Moreover, stimulated Brillouin scattering (SBS) will be suppressed simultaneously with DBLs as long as SRS is suppressed. DBLs can be attractive for driving inertial confined fusion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2015

Effect of indium and antimony doping in SnS single crystals

Highlights: • Single crystals growth of pure SnS, indium doped SnS and antimony doped SnS by direct vapour transport (DVT) technique. • Doping of In and Sb occurred in SnS single crystals by cation replacement. • The replacement mechanism ascertained by EDAX, XRD and substantiated by Raman spectra analysis. • Dopants concentration affects the optical energy bandgap. • Doping influences electrical transport properties. - Abstract: Single crystals of pure SnS, indium (In) doped SnS and antimony (Sb) doped SnS were grown by direct vapour transport (DVT) technique. Two doping concentrations of 5% and 15% each were employed for both In and Sb dopants. Thus in total five samples were studied viz., pure SnS (S1), 5% In doped SnS (S2), 15% In doped SnS (S3), 5% Sb doped SnS (S4) and 15% Sb doped SnS (S5). The grown single crystal samples were characterized by evaluating their surface microstructure, stoichiometric composition, crystal structure, Raman spectroscopy, optical and electrical transport properties using appropriate techniques. The d.c. electrical resistivity and thermoelectric power variations with temperature showed semiconducting and p-type nature of the as-grown single crystal samples. The room temperature Hall Effect measurements further substantiated the semiconducting and p-type nature of the as-grown single crystal samples. The obtained results are deliberated in detail.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Effect of high voltage electric field on structure and property of PEDOT:PSS film

Low electrical conductivity of PEDOT:PSS film is to some extent a limit for its wide application. To solve this problem, the high voltage electric field was used to improve the film’s electrical conductivity and its effects on the film’s structure and properties were investigated. The PEDOT:PSS film was prepared on quartz substrate with spin coating. Visible light transmittance of the prepared film was tested with UV–Visible spectroscopy and chemical structure was measured with Fourier transform Raman spectroscopy (FIRM). The surface morphology was characterized with AFM, and electrical conductivity was measured with Hall effects measurement. The results showed that with the increase of the electric field, the electrical conductivity of PEDOT:PSS film was boosted rapidly at first, and then improved slowly when the electric field was above 200 kV/m. The film’s electrical conductivity improved more than 17 times in total from 0.51 × 10{sup –3} up to 8.92 × 10{sup –3} S/m. However, the film’s visible light transmittance decreased only a little with the increase of the electric field, not more than 3%. In addition, despite little change in the chemical structure of the PEDOT:PSS film, its surface roughness increased significantly with the increase of the electric field intensity.

36 MATERIALS SCIENCE↗
DOE OSTI2023

In Situ Reconstructed Mo–doped Amorphous FeOOH Boosts the Oxygen Evolution Reaction

Developing a fast and highly active oxygen evolution reaction (OER) catalyst to change energy kinetics technology is essential for making clean energy. Herein, we prepare three-dimensional (3D) hollow Mo-doped amorphous FeOOH (Mo-FeOOH) based on the precatalyst MoS 2 /FeC 2 O 4 via in situ reconstruction strategy. Mo-FeOOH exhibits promising OER performance. Specifically, it has an overpotential of 285 mV and a durability of 15 h at 10 mA cm –2 . Characterizations indicate that Mo was included inside the FeOOH lattice, and it not only modifies the electronic energy levels of FeOOH but also effectively raises the inherent activity of FeOOH for OER. Additionally, in situ Raman analysis indicates that FeC 2 O 4 gradually transforms into the FeOOH active site throughout the OER process. Finally, this study provides ideas for designing in situ reconstruction strategies to prepare heteroatom doping catalysts for high electrochemical activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Carbonaceous Material Properties and Their Interactions with Slag During Electric Arc Furnace Steelmaking

The state of the interface between slag and carbon determines the slag foaming behavior and thus the effectiveness of carbon in electric arc furnace (EAF) steelmaking. This paper explores the interaction between synthetic slag and carbonaceous materials derived from various sources, including bio-char produced by two different technologies, graphite, coke, and char from tire pyrolysis. Different interfacial phenomena were found between slag and the carbonaceous materials examined. The interactions between bio-char and slag are found to be poor in comparison with other carbonaceous materials. Carbonaceous materials were characterized in terms of their chemical composition and the results obtained suggested that interfacial phenomena were not dominated by ash in the carbonaceous material. The effects of carbon crystalline structure on interaction with slag were evaluated by Raman spectroscopy and X-ray diffraction. Surface properties of the samples were evaluated using scanning electron microscopy, and surface morphology was identified as the principal factor affecting the interaction of slag on carbonaceous particles. The smooth surface of bio-char results in reduced slag foaming. This finding forms the basis for future research on the production of bio-char to be used as a slag foaming agent in EAF steelmaking.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Diethylenetriamine-functionalized graphene oxide: Insights into ion adsorption and applications in rare earth element separation

The growing demand for critical minerals and materials requires atom- and energy-efficient, selective separations to overcome the challenges posed by the similar chemical and physical properties of the rare earth elements (REEs) and their low concentrations in unconventional domestic feedstocks. Here, in this study, we developed diethylenetriamine-functionalized graphene oxide (DETA-GO) as a membrane material for REE adsorption and separation. Synthesis conditions were optimized to maximize nitrogen incorporation while also preserving GO dispersibility for facile membrane fabrication. We investigated the mechanism of amine functionalization, the nitrogen-bonding configurations, the organization of the interlayer transport channels, and the resulting effects on ion and water transport for REE separations. Neat-GO and DETA-GO multilayer laminate membranes were fabricated by vacuum filtration onto polymer supports. To investigate the effects of amine functionalization, the membranes were characterized using scanning electron microscopy, Raman, Fourier transform infrared, and X-ray photoelectron spectroscopy, as well as grazing-incidence X-ray diffraction measurements. Ion permeation experiments with representative lanthanum (La 3+ ) and ytterbium (Yb 3+ ) solutions revealed enhanced ion adsorption and water transport through DETA-GO membranes compared to neat-GO. The strong affinity of the membranes for multivalent REEs was also validated with conductivity and inductively coupled plasma mass spectrometry measurements. Atomistic insight into the role of amine functionalization in modulating nanochannel architecture and long-term stability, optimizing adsorption sites, and regulating REE and water transport was obtained using classical molecular dynamics simulations. Collectively, our joint experimental and theoretical study demonstrates the potential of DETA-GO membranes for selective REE separations, offering insights into ion-binding mechanisms, water-transport properties, and nanochannel optimization for the recovery of critical materials from aqueous feedstocks.

Adsorbent↗
DOE OSTI2024

Improved cycle stability and high-rate capability of LiNbO 3 -coated Li 3 VO 4 as anode material for lithium-ion battery

Lithium vanadate (Li 3 VO 4 ) has garnered considerable attention as an alternative negative electrode material for non-aqueous lithium-ion batteries due to its high capacity, energy efficiency, and stable discharge voltage. Nonetheless, the Li 3 VO 4 material displays a low rate capability, attributed mainly to its poor intrinsic electronic conductivity. Here, in this study, we report the synthesis of lithium niobate LiNbO 3 -coated Li 3 VO 4 (LVO@LNO) using a one-pot sol-gel method. The resulting LVO@LNO demonstrates a high reversible capacity of approximately 530 mAh/g, which is more than double that of free Li 3 VO 4 . To explore the effect of the LNO coating process on the morphological and structural properties, Raman, XRD, operando XRD, XPS, SEM and HTEM analyses were conducted. To explain the enhancement of electronic conductivity in our modified material after a LiNbO 3 coating, we conducted an Ex-Situ electrochemical impedance (EIS) and Density Functional Theory (DFT) computational study. Additionally, we designed a full cell utilizing a 1 wt% LNO-coated LVO anode and NMC-811 cathode. The cell yielded an output voltage of approximately 2.8 V with a high initial specific capacity of 350 mAh/g versus to the anode, at 1C with a capacity retention of 85 % after 100 cycles.

25 ENERGY STORAGE↗
DOE OSTI2017

A nanomechanical Raman spectroscopy based assessment of stress distribution in irradiated and corroded SiC

Silicon carbide (SiC) composites are under consideration for cladding and structural materials in various types of reactors. The effects of ion irradiation and corrosion on stress distribution due to mechanical loading on chemical vapor deposited (CVD) SiC were investigated here in this paper by using nanomechanical Raman spectroscopy (NMRS). The stress distribution was analyzed as a function of the oxide formation on a corroded specimen and as a function of ion-induced irradiation damage in an irradiated specimen. A finite element method (FEM) based model was developed based on local mechanical properties measured using nanoindentation to predict the NMRS measured stress distribution. The stress distribution was also predicted theoretically by using a stress concentration factor, which is a function of sample geometry and boundary conditions. The maximum stress obtained theoretically was in good agreement with the FEM model and NMRS based measurements. FEM results captured the stress variation trends and maximum stress value in the analyzed samples. NMRS measurements predicted that corrosion had a greater influence on increasing the maximum value of stress in comparison to ion irradiation. The increase in stress attributed to corrosion in comparison to ion irradiated samples was approximately 10%–20%.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Synthesis, characterization and electrocatalytic properties of delafossite CuGaO{sub 2}

Delafossite CuGaO{sub 2} has been employed as photocatalysts for solar cells, but their electrocatalytic properties have not been extensively studied, especially no comparison among samples made by different synthesis routes. Herein, we first reported the successful synthesis of delafossite CuGaO{sub 2} particles with three different morphologies, i.e. nanocrystalline hexagons, sub-micron sized plates and micron–sized particles by a modified hydrothermal method at 190 °C for 60 h [1–3], a sono-chemical method followed by firing at 850 °C for 48 h, and a solid state route at 1150 °C, respectively. Morphology, composition and phase purity of the synthesized samples was confirmed by powder X-ray diffraction and Raman spectroscopic studies, and then their electrocatalytic performance as active and cost effective electrode materials to the oxygen and hydrogen evolution reactions in 0.5 M KOH electrolyte versus Ag/AgCl was investigated and compared under the same conditions for the first time. The nanocrystalline CuGaO{sub 2} hexagons show enhanced electrocatalytic activity than the counterpart sub-micron sized plates and micron-sized particles. - Graphical abstract: Representative delafossite CuGaO2 samples with sub-micron sized plate and nanocrystalline hexagon morphologies accompanying with chronoamperometric voltammograms for oxygen evolution reaction and hydrogen evolution reaction in 0.5 M KOH electrolyte after purged with N{sub 2} gas. - Highlights: • Delafossite CuGaO{sub 2} with three morphologies has been synthesized. • Phase purity of the synthesized samples was confirmed. • Comparison on their electrocatalytic properties was made for the first time. • Their use as electrodes for oxygen and hydrogen evolution reactions was evaluated. • Nanocrystalline CuGaO{sub 2} hexagons show highest electrocatalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

MoVN-Cu Coatings for In Situ Tribocatalytic Formation of Carbon-Rich Tribofilms in Low-Viscosity Fuels

Inhibiting the tribological failure of mechanical assemblies which rely on fuels for lubrication is an obstacle to maintaining the lifetime of these systems with low-viscosity and low-lubricity fuels. Here in the present study, a MoVN-Cu nanocomposite coating was tribologically evaluated for durability in high- and low-viscosity fuels as a function of temperature, load, and sliding velocity conditions. The results indicate that the MoVN-Cu coating is effective in decreasing wear and friction relative to an uncoated steel surface. Raman spectroscopy, transmission electron microscopy, and electron-dispersive spectroscopy analysis of the MoVN-Cu worn surfaces confirmed the presence of an amorphous carbon-rich tribofilm which provides easy shearing and low friction during sliding. Further, the characterization of the formed tribofilm revealed the presence of nanoscale copper clusters overlapping with the carbon peak intensities supporting the tribocatalytic origin of the surface protection. The tribological assessment of the MoVN-Cu coating reveals that the coefficient of friction decreased with increasing material wear and initial contact pressure. These findings suggest that MoVN-Cu is a promising protective coating for fuel-lubricated assemblies due to its adaptive ability to replenish lubricious tribofilms from hydrocarbon environments.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Operando Spectroscopic Analysis of CoP Films Electrocatalyzing the Hydrogen-Evolution Reaction

Transition metal phosphides exhibit high catalytic activity toward the electrochemical hydrogen-evolution reaction (HER) and resist chemical corrosion in acidic solutions. For example, an electrodeposited CoP catalyst exhibited an overpotential, η of -η < 100 mV at a current density of -10 mA cm -2 in 0.500 M H 2 SO 4 (aq). To obtain a chemical description of the material as-prepared and also while effecting the HER in acidic media, such electrocatalyst films were investigated using Raman spectroscopy and X-ray absorption spectroscopy both ex situ as well as under in situ and operando conditions in 0.500 M H 2 SO 4 (aq). Ex situ analysis using the tandem spectroscopies indicated the presence of multiple ordered and disordered phases that contained both near-zerovalent and oxidized Co species, in addition to reduced and oxygenated P species. Lastly, operando analysis indicated that the active electrocatalyst was primarily amorphous and predominantly consisted of near-zerovalent Co as well as reduced P.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Diamond encapsulated silicon optical fibers synthesized by chemical vapor deposition

Semiconductor optical fibers encapsulated in a protective diamond coating can theoretically lead to immense power handling capabilities and infrared functionality. Here, silicon optical fibers are grown using high pressure chemical vapor deposition before being coated by 50 μm–300 μm of diamond by microwave plasma-assisted chemical vapor deposition. This coating extends conformally around the fiber cross section with diamond crystallites in the film on the order of several micrometers. Complete coating of high-quality diamond around the fiber is indicated by scanning electron microscopy and Raman measurements. The encapsulated silicon fibers are durable enough to survive the diamond deposition process, as demonstrated by their ability to guide infrared light.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Impact of the Stack Order in Cu-Zn-Sn Metal Precursors on the Properties of Cu2ZnSnS4 Thin Films

Cu2ZnSnS4 (CZTS) thin films were grown by the annealing of metallic precursors with different stack orders in sulfur atmosphere. The sequential deposition of the metal layers from single Cu, Zn, and Sn targets on Mo-coated soda-lime glass substrates was carried out using radio-frequency magnetron sputtering. In this work, we investigated the effect of the sequence of metal layers on the chemical, structural, and morphological properties of the final CZTS films using X-ray fluorescence (XRF), X-ray diffraction (XRD), Raman scattering spectroscopy, scanning electron microscopy, and energy-dispersive spectroscopy. The realized stack sequences were Mo/Sn/Zn/Cu, Mo/Sn/Cu/Zn, Mo/Cu/Zn/Sn, Mo/Cu/Sn/Zn, and Mo/Zn/Cu/Sn. XRF measurements revealed notable impact of the metal layers' stacking order in the precursor on the chemical composition. It also showed Sn loss and high Zn concentration in all sulfurized films; however, having Cu on the Sn or Zn/Sn layer showed some minimization of the Sn loss. XRD showed CZTS films with good crystallinity and no evidence of the presence of secondary phases. Changing the precursor stack order did not show any influence on the films' crystallinity or texture. Raman spectroscopy, in contrast, indicated the presence of ZnS phase beside the main CZTS phase. The morphology study showed significant effect on the structure of the final CZTS films depending on the used stack order. Generally, the films that originated from precursors having a Zn layer deposited directly on Mo or as the second layer exhibited better adhesion to the Mo layer and showed fewer or even no voids compared to the other films.

14 SOLAR ENERGY↗
DOE OSTI2015

Resonant radiation from oscillating higher order solitons

We present radiation mechanism exhibited by a higher order soliton. In a course of its evolution the higher-order soliton emits polychromatic radiation resulting in formation of multipeak frequency comb-like spectral band. The shape and spectral position of this band can be effectively controlled by the relative strength of the third order dispersion. An analytical description is corroborated by numerical simulations. Research showed that for longer pulses the described effect persists also under the action of higher order perturbations such as Raman and self-steepening.

36 MATERIALS SCIENCE↗
NASA NTRS1991

Electron cyclotron resonance microwave plasma deposition of a-Si:H and a-SiC:H films

The paper reports electron cyclotron resonance (ECR) deposition of a-Si:H and a-SiC:H thin films using SiH4, CH4, and hydrogen mixed gas plasmas. The ECR deposition conditions were investigated in the pressure region of 0.1 to 100 mtorr, and the film properties were characterized by light and dark conductivity measurements, XRD, Raman spectroscopy, optical transmission, and IR spectroscopy. In addition, the hydrogen dilution effect on ECR-deposited a-SiC:H was investigated.

Shing, Y. H.↗