Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pyridine”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Critical role of the sorting polymer in carbon nanotube-based minority carrier devices

A prerequisite for carbon nanotube-based optoelectronic devices is the ability to sort them into a pure semiconductor phase. One of the most common sorting routes is enabled through using specific wrapping polymers. Here we show that subtle changes in the polymer structure can have a dramatic influence on the figures of merit of a carbon nanotube-based photovoltaic device. By comparing two commonly used polyfluorenes (PFO and PFO-BPy) for wrapping (7,5) and (6,5) chirality SWCNTs, we demonstrate that they have contrasting effects on the device efficiency. We attribute this to the differences in their ability to efficiently transfer charge. Although PFO may act as an efficient interfacial layer at the anode, PFO-BPy, having the additional pyridine side groups, forms a high resistance layer degrading the device efficiency. By comparing PFO|C 60 and C 60 -only devices, we found that presence of a PFO layer at low optical densities resulted in the increase of all three solar cell parameters, giving nearly an order of magnitude higher efficiency over that of C 60 -only devices. In addition, with a relatively higher contribution to photocurrent from the PFO-C 60 interface, an open circuit voltage of 0.55 V was obtained for PFO-(7,5)-C 60 devices. On the other hand, PFO-BPy does not affect the open circuit voltage but drastically reduces the short circuit current density. Lastly, these results indicate that the charge transport properties and energy levels of the sorting polymers have to be taken into account to fully understand their effect on carbon nanotube-based solar cells.

14 SOLAR ENERGY↗

Synthesis of Nitrogen and Sulfur Codoped Nanoporous Carbons from Algae: Role in CO 2 Separation

Nitrogen and sulfur codoped and completely renewable carbons were synthesized from two types of algae, Spirulina Platensis and Chlorella Vulgaris, without any additional nitrogen fixation reaction. The type of activation agents, char-forming temperature, activation agent-to-char ratio, and activation temperature were all varied to optimize the reaction conditions for this synthesis. The maximum Brunauer–Emmett–Teller surface area and total pore volumes of the carbons were 2685 m 2 /g and 1.4 cm 3 /g, respectively. The nitrogen and sulfur contents of the carbons were in the range of 0.9–5.69 at. % and 0.05–0.2 at. %, respectively. The key nitrogen functionalities were pyridinic, amino, and pyridonic/pyrrolic groups, whereas the key sulfur functionalities were S–C, O–S–C, and SO x groups. CO 2 adsorption isotherms were measured at 273, 298, and 313 K, and the ideal adsorbed solution theory was employed to calculate the selectivity of adsorption of CO 2 over N 2 and simulate binary adsorption isotherms. The adsorption results demonstrated that the CO 2 adsorption amount and the heat of CO 2 adsorption were higher for carbons with higher nitrogen content, confirming the influence of nitrogen functionality in CO 2 adsorption. The overall results suggested that these algae-derived renewable carbons can serve as potential adsorbents for CO 2 separation from N 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly Stable Fe/Co-TPY-MIL-88(NH 2 ) Metal–Organic Framework (MOF) in Enzymatic Cascade Reactions for Chemiluminescence-Based Detection of Extracellular Vesicles

Metal-Organic Frameworks (MOFs) can deliver many advantages when acting as enzyme mimics to assist with signal amplification in molecular detection: they have abundant active catalytic sites per unit volume of the material; their structures and elemental compositions are highly tunable, and their high specific surface area and porous property can assist with target separation and enrichment. In the present work, we have demonstrated that, by adding the pore partition agent, 2,4,6-tris(4-pyridyl)pyridine (TPY) during synthesis of the bimetallic Fe/Co-MIL-88(NH 2 ) MOF to block the open metal sites, a highly porous MOF of Fe/Co-TPY-MIL-88(NH 2 ) can be produced. This material also exhibits high stability in basic solutions and biofluids and possesses high peroxidase-mimicking activity, which can be utilized to produce long-lasting chemiluminescence (CL) from luminol and H 2 O 2 . Moreover, acting as the peroxidase-mimic, the Fe/Co-TPY-MIL-88(NH 2 ) MOF can form the enzymatic cascade with glucose oxidase (GOx) for biomarker detection. Further, when applied to detect extracellular vesicles (EVs), the MOF material and GOx are brought to the proximity on the EVs through two surface proteins, which triggers the enzyme cascade to produce high CL from glucose and luminol. EVs within the concentration range of 5 × 10 5 - 4 ×10 7 particles/mL can be detected, and the method can be used to analyze EV contents in human serum without sample preparation and EV purification. Overall, our work demonstrates that the high versatility and tunability of the MOF structures could bring in significant benefits to biosensing and enable ultrasensitive detection of biomarkers with judicious material designs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Co(salen)-Catalyzed Oxidation of Lignin Models to Form Benzoquinones and Benzaldehydes: A Computational and Experimental Study

Lignin is a highly abundant polyphenolic polymer that imparts mechanical strength to plant biomass. Transition-metal complexes can catalyze lignin oxidation to produce value-added products, but low catalytic efficiency has hampered their use in industry. Identifying the chemical and structural factors that govern catalytic activity is a prerequisite to rational design of catalysts with improved activity. In this study, we combine computational and experimental approaches to investigate the mechanism of Co(salen)-catalyzed oxidation of the monomeric lignin models syringyl (S), vanillyl (G), and 4-hydroxybenzyl alcohol (H) to produce benzoquinone and benzaldehyde products. Experimentally, S oxidation to form dimethoxybenzoquinone proceeded efficiently with a Co(salen) catalyst coordinated by a pyridine ligand, but G and H did not undergo oxidation. Density functional theory calculations reveal that catalyst regeneration is energetically unfavorable in the presence of H, which prevents oxidation. In contrast, S readily facilitates catalyst regeneration. Formation of methoxybenzoquinone from G was achieved experimentally by adding bulky, noncoordinating bases. These findings provide a fundamental baseline for enhancing the activity of Co-Schiff base catalysts toward lignin-like molecules by adding sterically hindered nitrogenous bases or potentially by including a cocatalyst that promotes catalyst regeneration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cascade Reaction of Ethanol to Butadiene over Multifunctional Silica-Supported Ag and ZrO 2 Catalysts

Although butadiene is currently a by-product of naphtha cracking, interest in producing butadiene from bio-based ethanol has increased because of the lower environmental impact of the ethanol to butadiene reaction. Furthermore, this work explores a multifunctional catalyst system composed of silica-supported Ag and ZrO 2 used for the cascade reaction of ethanol to butadiene at 573 K. The Ag and ZrO 2 components were synthesized on separate support particles enabling characterization of each component without interference from the other. High selectivity to butadiene (65%) at high ethanol conversion (75%) was achieved with an appropriate ratio of Ag and ZrO 2 in the reactor. Silver catalyzed the initial dehydrogenation of ethanol to acetaldehyde while ZrO 2 catalyzed the C-C coupling and subsequent dehydration reactions. The silica-supported ZrO 2 exhibited superior selectivity relative to bulk ZrO 2 in the Ag-promoted ethanol to butadiene reaction. Results from Zr K-edge X-ray absorption spectroscopy and UV-Vis spectroscopy showed that ZrO 2 was highly dispersed on the silica support over a range of loadings. Infrared spectroscopy of adsorbed pyridine, CO, and CO 2 , and kinetics of probe reactions 1-butene double bond isomerization, 2-propanol decomposition, and ethanol hydrogenation of acetone were used to compare the acid-base nature and chemical reactivity of silica-supported ZrO 2 to bulk ZrO 2 .

09 BIOMASS FUELS↗

Graphene-Based Non-Noble-Metal Catalysts for Oxygen Reduction Reaction in Acid

Non-noble-metal catalysts based on Fe-N-C moieties have shown promising oxygen reduction reaction (ORR) activity in proton exchange membrane fuel cells (PEMFCs). In this study, we report a facile method to prepare a Fe-N-C catalyst based on modified graphene (Fe-N-rGO) from heat treatment of a mixture of Fe salt, graphitic carbon nitride (g-C{sub 3}N{sub 4}), and chemically reduced graphene (rGO). The Fe-N-rGO catalyst was found to have pyridinic N-dominant heterocyclic N (40% atomic concentration among all N components) on the surface and have an average Fe coordination of {approx}3 N (Fe-N{sub 3,average}) in bulk. Rotating disk electrode measurements revealed that Fe-N-rGO had high mass activity in acid and exhibited high stability at 0.5 V at 80 C in acid over 70 h, which was correlated to low H{sub 2}O{sub 2} production shown from rotating ring disk electrode measurements.

30 DIRECT ENERGY CONVERSION↗

In situ formation of pyridyl-functionalized poly(3-hexylthiophene)s via quenching of the Grignard metathesis polymerization: Toward ligands for semiconductor quantum dots

The synthesis of well-defined, end-functional poly(3-hexylthiophene)s (P3HTs) by in situ quenching of the Grignard metathesis (GRIM) polymerization is complicated by the extreme tendency to favor difunctional products in all but a few cases. A facile one-pot method for preparing 2-pyridyl and 3-pyridyl P3HTs with high abundance of monofunctional products is established via an examination of the kinetics of the end-functionalization quenching reaction with lithium chloride complexes of 2- and 3-pyridyl Grignard reagents. Density functional theory calculations guide the selection of pyridine as the end group, which provides the capacity to ligate cadmium selenide (CdSe) nanocrystals and arrests aggregation upon thermal annealing when dispersed in a P3HT matrix. The relative abundances of various end-functional products, as ascertained by high-resolution matrix assisted laser desorption ionization time-of-flight mass spectrometry, can be altered through the use of 1-pentene as an additive: GRIM polymerizations quenched with 3-pyridyl and 2-pyridyl Grignard reagents show 5% and 18% abundances of difunctional, pyridyl-capped P3HTs, respectively, when 1-pentene is present at 1000:1 relative to the nickel catalyst. This represents a significant improvement compared to quenching with aryl Grignard reagents, where difunctional products predominate. Furthermore, the ability to manipulate end group compositions coupled with the propensity of pyridyl-functionalized P3HTs to ligate semiconductor quantum dots (SQDs) opens new possibilities for tuning the morphology of conjugated polymer/SQD blends.

36 MATERIALS SCIENCE↗

Electrochemical and Solid-State Lithiation of Graphitic C 3 N 4

: Lithiated graphitic carbon n.itride (C 3 N 4 ) was fabricated by electrochemical and solid-state reactions. The addition of Li to C 3 N 4 results in a reaction between the Li and the graphite-like C 3 N species in C 3 N 4 . This irreversible reaction leads to the formation of Li-CH=NR and Li-N=CR 2 species, which are detrimental to anode properties. Suitable nitrogen-doped carbon structures for anode applications are predicted to need high concentrations of pyridinic C-N-C terminal bonds and low concentrations of w quaternary C 3 N species to boost electronic conductivity and reversibly cycle Li ions.

25 ENERGY STORAGE↗

Nonaqueous Electrocatalytic Oxidation of the Alkylaromatic Ethylbenzene by a Surface Bound Ru V (O) Catalyst

The catalyst [Ru(Mebimpy)(4,4'-((HO)2OPCH2)2bpy(OH2)]2+, where Mebimpy is 2,6-bis(1-methylbenzimidazol-2-yl)pyridine and 4,4'-((HO)2OPCH2)2bpy is 4,4'-bis-methlylenephosphonato-2,2'-bipyridine, attached to nanocrystalline Sn(IV)-doped In2O3 (nanoITO) electrodes (nanoITO|RuII–OH22+) has been utilized for the electrocatalytic oxidation of the alkylaromatics ethylbenzene, toluene, and cumene in propylene carbonate/water mixtures. Oxidative activation of the surface site to nanoITO|RuV(O)3+ is followed by hydrocarbon oxidation at the surface with a rate constant of 2.5 ± 0.2 M–1 s–1 (I = 0.1 M LiClO4, T = 23 ± 2 °C) for the oxidation of ethylbenzene. Electrocatalytic oxidation of ethylbenzene to acetophenone occurs with a faradic efficiency of 95%. H/D kinetic isotope effects determined for oxidation of ethylbenzene point to a mechanism involving oxygen atom insertion into a C–H bond of ethylbenzene followed by further 2e–/2H+ oxidation to acetophenone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design criteria for polyazine extractants to separate An III from Ln III

Although polyazine extractants have been extensively studied as agents for partitioning trivalent actinides from lanthanides, an explanation for why certain azine compositions succeed and others fail is lacking. To address this issue, density functional theory calculations were used to evaluate fundamental properties (intrinsic binding affinity for a representative trivalent f-block metal, basicity, and hardness) for prototype azine donors pyridine, pyridazine, pyrimidine, pyrazine, 1,2,3-triazine, 1,2,4-triazine, and 1,3,5-triazine, as well as perform conformational analyses of bisazine chelates formed by directly connecting two donors together. Lastly, the results provide criteria that both rationalize the behavior of known extractants, TERPY, TPTZ, hemi-BTP, BTP, BTBP, and BTPhen, and predict a new class of extractants based on pyridazine donor groups.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computational study of Gleevec and G6G reveals molecular determinants of kinase inhibitor selectivity

Gleevec is a potent inhibitor of Abl tyrosine kinase but not of the highly homologous c-Src kinase. Because the ligand binds to an inactive form of the protein in which an Asp-Phe-Gly structural motif along the activation loop adopts a so-called DFG-out conformation, it was suggested that binding specificity was controlled by a “conformational selection” mechanism. In this context, the binding affinity displayed by the kinase inhibitor G6G poses an intriguing challenge. Although it possesses a chemical core very similar to that of Gleevec, G6G is a potent inhibitor of both Abl and c-Src kinases. Both inhibitors bind to the DFG-out conformation of the kinases, which seems to be in contradiction with the conformational selection mechanism. To address this issue and display the hidden thermodynamic contributions affecting the binding selectivity, molecular dynamics free energy simulations with explicit solvent molecules were carried out. Relative to Gleevec, G6G forms highly favorable van der Waals dispersive interactions upon binding to the kinases via its triazine functional group, which is considerably larger than the corresponding pyridine moiety in Gleevec. Upon binding of G6G to c-Src, these interactions offset the unfavorable free energy cost of the DFG-out conformation. When binding to Abl, however, G6G experiences an unfavorable free energy penalty due to steric clashes with the phosphate-binding loop, yielding an overall binding affinity that is similar to that of Gleevec. Such steric clashes are absent when G6G binds to c-Src, due to the extended conformation of the phosphate-binding loop.

59 BASIC BIOLOGICAL SCIENCES↗

Reduction of a Redox-Active Ligand Drives Switching in a Cu(I) Pseudorotaxane by a Bimolecular Mechanism

The reduction of a redox-active ligand is shown to drive reversible switching of a Cu(I) [2]pseudorotaxane ([2]PR{sup 2+}) into the reduced [3]pseudorotaxane ([3]PR{sup 2+}) by a bimolecular mechanism. The unreduced pseudorotaxanes [2]PR{sup 2+} and [3]PR{sup 2+} are initially self-assembled from the binucleating ligand, 3,6-bis(5-methyl-2-pyridine)-1,2,4,5-tetrazine (Me2BPTZ), and a preformed copper-macrocycle moiety (Cu-M{sup 2+}) based on 1,10-phenanthroline. X-ray crystallography revealed a syn geometry of the [3]PR{sup 2+}. The UV-vis-NIR spectra show low-energy metal-to-ligand charge-transfer transitions that red shift from 808 nm for [2]PR{sup 2+} to 1088 nm for [3]PR{sup 2+}. Quantitative analysis of the UV-vis-NIR titration shows the stepwise formation constants to be K{sub 1} = 8.9 x 10{sup 8} M{sup -1} and K{sub 2} = 3.1 x 10{sup 6} M{sup -1}, indicative of negative cooperativity. The cyclic voltammetry (CV) and coulometry of Me{sub 2}BPTZ, [2]PR{sup 2+}, and [3]PR{sup 2+} shows the one-electron reductions at E{sub 1/2} = -0.96, -0.65, and -0.285 V, respectively, to be stabilized in a stepwise manner by each Cu{sup 2+} ion. CVs of [2]PR{sup 2+} show changes with scan rate consistent with an EC mechanism of supramolecular disproportionation after reduction: [2]PR{sup 0} + [2]PR{sup 2+} = [3]PR{sup 2+} + Me{sub 2}BPTZ{sup 0} (K*{sub D}, k{sub d}). UV-vis-NIR spectroelectrochemistry was used to confirm the 1:1 product stoichiometry for [3]PR{sup 2+}:Me{sub 2}BPTZ. The driving force ({Delta}G*{sub D} = -5.1 kcal mol{sup -1}) for the reaction is based on the enhanced stability of the reduced [3]PR{sup 2+} over reduced [2]PR{sup 0} by 365 mV (8.4 kcal mol{sup -1}). Digital simulations of the CVs are consistent with a bimolecular pathway (k{sub d} = 12,000 s{sup -1} M{sup -1}). Confirmation of the mechanism provides a basis to extend this new switching modality to molecular machines.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bioinspired Diversification Approach Toward the Total Synthesis of Lycodine-Type Alkaloids

Nitrogen heterocycles (azacycles) are common structural motifs in numerous pharmaceuticals, agrochemicals, and natural products. Many powerful methods have been developed and continue to be advanced for the selective installation and modification of nitrogen heterocycles through C–H functionalization and C–C cleavage approaches, revealing new strategies for the synthesis of targets containing these structural entities. Here, we report the first total syntheses of the lycodine-type Lycopodium alkaloids casuarinine H, lycoplatyrine B, lycoplatyrine A, and lycopladine F as well as the total synthesis of 8,15-dihydrohuperzine A through bioinspired late-stage diversification of a readily accessible common precursor, N-desmethyl-β-obscurine. Key steps in the syntheses include oxidative C–C bond cleavage of a piperidine ring in the core structure of the obscurine intermediate and site-selective C–H borylation of a pyridine nucleus to enable cross-coupling reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PCET-Based Ligand Limits Charge Recombination with an Ir(III) Photoredox Catalyst

Upon photoinitiated electron transfer, charge recombination limits the quantum yield of photoredox reactions for which the rates for the forward reaction and back electron transfer are competitive. Taking inspiration from a proton-coupled electron transfer (PCET) process in Photosystem II, here a benzimidazole-phenol (BIP) has been covalently attached to the 2,2'-bipyridyl ligand of [Ir(dF(CF 3 )ppy) 2 (bpy)][PF 6 ] (dF(CF 3 )ppy = 2-(2,4-difluorophenyl)-5-(trifluoromethyl)pyridine; bpy = 2,2'-bipyridyl). Excitation of the [Ir(dF(CF 3 )ppy) 2 (BIP-bpy)][PF 6 ] photocatalyst results in intramolecular PCET to form a charge-separated state with oxidized BIP. Subsequent reduction of methyl viologen dication (MV 2+ ), a substrate surrogate, by the reducing moiety of the charge separated species demonstrates that the inclusion of BIP significantly slows the charge recombination rate. The effect of ~24-fold slower charge recombination in a photocatalytic phthalimide ester reduction resulted in a greater than 2-fold increase in reaction quantum efficiency.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Solid-State Pathway Control via Reaction-Directing Heteroatoms: Ordered Pyridazine Nanothreads through Selective Cycloaddition

Nanothreads are one-dimensional nanomaterials comprised of a primarily sp 3 hydrocarbon backbone. They are typically formed through cycloaddition reactions induced by compression of small molecules to high pressures. Although nanothreads have been synthesized from a range of small molecule precursors (e.g., benzene, pyridine, aniline), the ability to control reaction pathways to produce atomically precise nanothreads with distinct chemical structures remains a difficult challenge. In this study, we show how heteroatoms incorporated within starting precursors can serve as “thread directing” groups by selecting for specific cycloaddition reaction pathways. By using a less-reactive diazine group within a six-membered aromatic ring, we successfully predict and synthesize the first carbon nanothread material derived from pyridazine (1,2-diazine, C 4 H 4 N 2 ). Compared with previous nanothreads, the synthesized polypyridazine, shows a predominantly uniform chemical structure with exceptional long-range order, allowing for structural characterization using vibrational spectroscopy and X-ray diffraction. The results demonstrate how thread-directing groups can be used for precise reaction pathway control and the formation of chemically precise nanothreads with a high degree of structural order.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NO Coupling at Copper to cis -Hyponitrite: N 2 O Formation via Protonation and H-Atom Transfer

Copper nitrite reductases (CuNIRs) convert NO 2 – to NO as well as NO to N 2 O under high NO flux at a mononuclear type 2 Cu center. While model complexes illustrate N–N coupling from NO that results in symmetric trans-hyponitrite [Cu II ]– ONNO–[Cu II ] complexes, in this work we report NO assembly at a single Cu site in the presence of an external reductant Cp* 2 M (M = Co, Fe) to give the first copper cis-hyponitrites [Cp* 2 M]{[Cu II ](κ 2 - O 2 N 2 )[Cu I ]}. Importantly, the κ 1 –N-bound [Cu I ] fragment may be easily removed by the addition of mild Lewis bases such as CNAr or pyridine to form the spectroscopically similar anion {[Cu II ](κ 2 -O 2 N 2 )} – . The addition of electrophiles such as H + to these anionic copper(II) cis-hyponitrites leads to N 2 O generation with the formation of the dicopper(II)-bis-μ-hydroxide [Cu II ] 2 (μ- OH) 2 . One-electron oxidation of the {[Cu II ](κ 2 -O 2 N 2 )} – core turns on H-atom transfer reactivity, enabling the oxidation of 9,10- dihydroanthracene to anthracene with concomitant formation of N 2 O and [Cu II ] 2 (μ-OH) 2 . These studies illustrate both the reductive coupling of NO at a single copper center and a way to harness the strong oxidizing power of nitric oxide via the neutral cis- hyponitrite [Cu](κ 2 -O 2 N 2 ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure of Gas Phase Monohydrated Nicotine: Implications for Nicotine’s Native Structure in the Acetylcholine Binding Protein

In this work, we report a joint experimental–theoretical study of the never reported before structure and infrared spectra of gas phase monohydrated nicotine (NIC) and nornicotine (NOR) and use them to assign their protonation sites. NIC’s biological activity is strongly affected by its protonation site, namely, the pyrrolidine (Pyrro-NICH + , anticipated active form) and pyridine (Pyri-NICH + ) forms; however, these have yet to be directly experimentally determined in either the nicotinic acetylcholine receptor (nAChR, no water present) or the acetylcholine-binding protein (AChBP, a single water molecule is present) but can only be inferred to be Pyrro-NICH + from the intermolecular distance to the neighboring residues (i.e., tryptophan). Our temperature-controlled double ion trap infrared spectroscopic experiments assisted by the collisional stripping method and high-level theoretical calculations yield the protonation ratio of Pyri:Pyrro = 8:2 at 240 K for the gas phase NICH + ···(H 2 O) complex, which resembles the molecular cluster present in the AChBP. Therefore, a single water molecule in the gas phase enhances this ratio in NICH + relative to the 3:2 for the nonhydrated gas phase NICH + in a trend that contrasts with the almost exclusive presence of Pyrro-NICH + in aqueous solution. In contrast, the Pyri-NORH + protomer is exclusively observed, a fact that may correlate with its weaker biological activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗