Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase modulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Observation of an intermediate state during lithium intercalation of twisted bilayer MoS2

Abstract Lithium intercalation of MoS 2 is generally believed to introduce a phase transition from H phase (semiconducting) to T phase (metallic). However, during the intercalation process, a spatially sharp boundary is usually formed between the fully intercalated T phase MoS 2 and non-intercalated H phase MoS 2 . The intermediate state, i.e ., lightly intercalated H phase MoS 2 without a phase transition, is difficult to investigate by optical-microscope-based spectroscopy due to the narrow size. Here, we report the stabilization of the intermediate state across the whole flake of twisted bilayer MoS 2 . The twisted bilayer system allows the lithium to intercalate from the top surface and enables fast Li-ion diffusion by the reduced interlayer interaction. The E 2g Raman mode of the intermediate state shows a peak splitting behavior. Our simulation results indicate that the intermediate state is stabilized by lithium-induced symmetry breaking of the H phase MoS 2 . Our results provide an insight into the non-uniform intercalation during battery charging and discharging, and also open a new opportunity to modulate the properties of twisted 2D systems with guest species doping in the Moiré structures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Chirality locking charge density waves in a chiral crystal

In Weyl semimetals, charge density wave (CDW) order can spontaneously break the chiral symmetry, gap out the Weyl nodes, and drive the material into the axion insulating phase. Investigations have however been limited since CDWs are rarely seen in Weyl semimetals. Here, using scanning tunneling microscopy/spectroscopy (STM/S), we report the discovery of a novel unidirectional CDW order on the (001) surface of chiral crystal CoSi – a unique Weyl semimetal with unconventional chiral fermions. The CDW is incommensurate with both lattice momentum and crystalline symmetry directions, and exhibits an intra unit cell π phase shift in the layer stacking direction. The tunneling spectrum shows a particle-hole asymmetric V-shaped energy gap around the Fermi level that modulates spatially with the CDW wave vector. Combined with first-principle calculations, we identify that the CDW is locked to the crystal chirality and is related by a mirror reflection between the two enantiomers of the chiral crystal. Our findings reveal a novel correlated topological quantum state in chiral CoSi crystals and raise the potential for exploring the unprecedented physical behaviors of unconventional chiral fermions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Pacific decadal oscillation causes fewer near-equatorial cyclones in the North Indian Ocean

Tropical cyclones do not form easily near the equator but can intensify rapidly, leaving little time for preparation. We investigate the number of near-equatorial (originating between 5°N and 11°N) tropical cyclones over the north Indian Ocean during post-monsoon season (October to December) over the past 60 years. The study reveals a marked 43% decline in the number of such cyclones in recent decades (1981–2010) compared to earlier (1951–1980). Here, we show this decline in tropical cyclone frequency is primarily due to the weakened low-level vorticity modulated by the Pacific Decadal Oscillation (PDO) and increased vertical wind shear. In the presence of low-latitude basin-wide warming and a favorable phase of the PDO, both the intensity and frequency of such cyclones are expected to increase. Such dramatic and unique changes in tropical cyclonic activity due to the interplay between natural variability and climate change call for appropriate planning and mitigation strategies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Effects of dilution in ionic liquid supercapacitors

Room-temperature ionic liquids (RTILs) are synthetic electrolytes that have a large electrochemical stability window, making them attractive candidates for electric double-layer capacitor (EDLC) applications. Due to their high viscosities and low ionic conductivities, RTILs are often diluted with organic solvent for practical use. Here, we study the effects of dilution on the performance of RTIL EDLCs using a simple mean-field model. We find that dilution diminishes the unfavorable hysteresis that results from a spontaneous surface charge separation (SSCS). As a result, the RTIL concentration can be used to modulate the proximity to the SSCS transition, and maximize capacitance. The interplay between the concentration and the correlation strength gives rise to complex zero-potential phase behavior, including a tricritical point and a λ-line, very similar to the Blume–Capel dilute Ising model. Additionally, electrodes that are solvophilic aid in the prevention of SSCS by drawing solvent molecules to the electrode and displacing ions. Solvophilic electrodes give rise to a phase transition at finite potential where the surface charge rapidly increases with a small increase in potential, leading to a substantial increase in capacitance and energy storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Synthesis and structure of carbon-doped H 3 S compounds at high pressure

Understanding of recently reported putative close-to-room-temperature superconductivity in C-S-H compounds at 267 GPa demands a reproducible synthesis protocol as well as knowledge of the compounds' structure and composition. Here, we synthesized C-S-H compounds with various carbon compositions at high pressures from elemental carbon C and methane CH 4 , sulfur S, and molecular hydrogen H 2 . Here, we focus on compounds synthesized using methane as these allow a straightforward determination of their structure and composition by combining single-crystal x-ray diffraction and Raman spectroscopy. We applied a two-stage synthesis of [(CH 4 ) x (H 2 S) (1-x) ] 2 H 2 compounds with various compositions by first reacting sulfur and mixed methane-hydrogen fluids and forming CH 4 -doped H 2 S crystals at 0.5-3 GPa and then by growing single crystals of the desired hydrogen-rich compound. Raman spectroscopy applied to this material shows the presence of CH 4 molecules incorporated into the lattice and allows the determination of the CH 4 content, while single-crystal x-ray diffraction results suggest that the methane molecules substitute H 2 S molecules. The structural behavior of these compounds is very similar to the previously investigated methane-free crystals demonstrating a transition from Al 2 Cu type I4/mcm molecular crystal to a modulated molecular structure at 20-30 GPa and back to the same basic I4/mcm structure in an extended modification with greatly modified Raman spectra. This latter phase demonstrates a distortion into a Pnma structure at 132-159 GPa and then transforms into a common Im$\bar{3}$m H 3 S phase at higher pressures; however, no structural anomaly is detected near 220 GPa, where a sharp upturn in T c has been reported.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

A Comparison of Emerging and Industry Benchmark Photovoltaic Backsheets Between Different Outdoor Locations

Recent interest within the photovoltaic (PV) module industry is largely directed toward enhanced lifetimes in the field, balanced with improved recyclability. Traditionally, fluoropolymer-based backsheets have been used, however, are difficult to recycle. Emerging polyolefin (PO)-based backsheets are more recyclable and can be formulated to be robust. Properties of different fluoropolymer- and non-fluoropolymer-based backsheet coupons and in encapsulated silicon mini modules that have been fielded in Albuquerque, NM and Cocoa, FL are reported here. Seven backsheets were examined: two novel PO's, TPT, APO, PPE, AAA, and KPf. Methods of examination include module electrical performance (I - V flash test), surface morphology (optical microscope and gloss), polymer chemical structure (FTIR), EL imaging, mechanical tensile testing, DC breakdown voltage, DSC (phase transitions), and optical performance (reflectance spectra).

industries↗
DOE OSTI2020

Initial Steps Towards a Clinical FLASH Radiotherapy System: Pediatric Whole Brain Irradiation with 40 MeV Electrons at FLASH Dose Rates

In this work, we investigated the delivery of a clinically acceptable pediatric whole brain radiotherapy plan at FLASH dose rates using two lateral opposing 40-MeV electron beams produced by a practically realizable linear accelerator system. The EGSnrc Monte Carlo software modules, BEAMnrc and DOSXYZnrc, were used to generate whole brain radiotherapy plans for a pediatric patient using two lateral opposing 40-MeV electron beams. Electron beam phase space files were simulated using a model of a diverging beam with a diameter of 10 cm at 50 cm SAD (defined at brain midline). The electron beams were collimated using a 10-cm-thick block composed of 5 cm of aluminum oxide and 5 cm of tungsten. For comparison, a 6-MV photon plan was calculated with the Varian AAA algorithm. Electron beam parameters were based on a novel linear accelerator designed for the PHASER system and powered by a commercial 6-MW klystron. Calculations of the linear accelerator's performance indicated an average beam current of at least 6.25 µA, providing a dose rate of 115 Gy/s at isocenter, high enough for cognition-sparing FLASH effects. The electron plan was less homogenous with a homogeneity index of 0.133 compared to the photon plan's index of 0.087. Overall, the dosimetric characteristics of the 40-MeV electron plan were suitable for treatment. In conclusion, Monte Carlo simulations performed in this work indicate that two lateral opposing 40-MeV electron beams can be used for pediatric whole brain irradiation at FLASH dose rates of >115 Gy/s and serve as motivation for a practical clinical FLASH radiotherapy system, which can be implemented in the near future.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2022

Grid-tied Multilevel Inverter with Phase-locked Loop Algorithm

A multilevel inverter is an electronic device capable of changing direct current energy to alternant current energy with a voltage and frequency established by the user. They are ideal for connecting renewable energy sources to the AC grid, energy plants, and smart grids. The voltage must be balanced and synchronized with the electrical network for adequate performance. This paper shows the voltage synchronization between an inverter output voltage and the AC grid using a phase-locked loop based on an adaptive observer. The proposed algorithm can perform under grid uncertainties such as noise and generates a reference signal for the modulation used in the inverter. The algorithm is robust and computationally efficient and can be implemented through basic elements such as operational amplifiers, resistors, and capacitors, reducing its difficulty in executing it in a system.

42 ENGINEERING↗
DOE OSTI2020

Uncovering the Functional Role of Coherent Phonons during the Photoinduced Phase Transition in a Molecular Crystal

The atomic motions that make up phonons and molecular vibrations in molecular crystals influence their photophysical and electronic properties, including polaron formation, carrier mobility, and phase transitions. Discriminating between spectator and driving motions is a significant challenge hindering optimization. Unlocking this information and developing fine-tuned controls over actively participating phonon modes would not only lead to a stronger understanding of photochemistry but also provide a significant new tool in controlling solid state chemistry. We present a strategy using rationally designed double pulses to unveil the unique function of specific excited state phonon modes. Using ultrafast spectroscopy, we identified 50 and 90 cm –1 phonons involved in modulating the photoinduced spin-Peierls melting of potassium tetracyanoquinodimethane crystals. Here, we show that the 50 cm –1 phonon specifically corresponds to the coherent nuclear wavepacket involved in the charge transfer component of the overall spin-Peierls phase melting process, while the 90 cm –1 phonon facilitates the phase transition component.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Design and construction of the CMS Outer Tracker for the Phase-2 Upgrade

The High Luminosity LHC (HL-LHC) is expected to deliver an integrated luminosity of $3000-4000\;$fb$^{-1}$ after 10 years of operation with peak instantaneous luminosity reaching about $5-7.5\times10^{34}$cm$^{-2}$s$^{-1}$. During Long Shutdown 3, several components of the CMS detector will undergo major changes, called Phase-2 upgrades, to be able to operate in the challenging environment of the HL-LHC. The current CMS silicon strip tracker has to be replaced with a new detector. The Phase-2 Outer Tracker (OT) will have high radiation tolerance, higher granularity and the capability to handle higher data rates. Another key feature of the OT will be to provide tracking information to the Level-1 trigger, allowing trigger rates to be kept at a sustainable level without sacrificing physics potential. For this, the OT will be made out of modules which have two closely spaced sensors read out by front-end ASICs, which can correlate hits in the two sensors creating short track segments, called stubs. The stubs will be used for tracking in the L1 track finder. In this contribution, the design of the CMS Phase-2 OT, the technological choices and first results with prototype devices are reported.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Demonstration and characterization of insertable passive thermal switches for dynamic building envelopes

A dynamic building envelope integrated with thermal energy storage, such as phase change material (PCM), is an emerging technology that offers a promising solution to improve the energy efficiency of buildings. This study reports the development of insertable thermal switches, which modulate thermal resistance, thereby making building envelopes dynamic and enhancing the use of free ambient heating and cooling. The reported thermal switches are passive, meaning they work solely based on indoor and outdoor temperatures. A single switch when inserted into 10 × 10-in (0.064-m 2 ) XPS foam board insulation demonstrates effective thermal conductivity of 0.050 W/m-K in the resistive state and 0.285 W/m-K in the conductive state. Thermal switches exhibit an effective switching ratio of 5.7, with no noticeable degradation in performance over 770 cycles. Additionally, when integrated into a wall sample containing a PCM layer, switches significantly reduce the PCM solidification time by 43.2% during the cooling process.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Reactive Transport Modeling of Anthropogenic Carbon Mineralization in Stacked Columbia River Basalt Reservoirs

Numerical simulation of CO2 storage in basalts and related reactive lithologies requires modeling complex, coupled hydrologic and chemical processes, including multi-phase flow and transport, partitioning of CO2 into the aqueous phase, and chemical interactions with aqueous fluids and rock minerals. We conducted reactive transport simulations of the Wallula pilot-scale CO2 injection into the flow tops of the Grande Ronde Basalt using our PNNL STOMP-CO2 simulator with the ECKEChem reactive module. Our mineralization simulation of the ~1,000 tons of injected CO2 into the interflow zones was based on the hydrologic transport model we previously developed. For this work, the simulations considered geochemical reactions involving the basalt components, precipitates, formation brine, and injected CO2. In our benchmark case, carbonate minerals precipitated, resulting in ~20% of the CO2 being mineralized in 10 years. Increasing the reaction rate of a single primary mineral phase (clinopyroxene) by an order of magnitude resulted in a carbon mineralization reaction extent of ~90% over the same time interval. Based on these initial sensitivity analysis results, it is clear that a thorough understanding of primary mineral dissolution rates is required for accurately predicting long-term fate and transport of injected CO2 into basalt formations. Our reactive transport numerical simulations will be key components of commercial-scale CO2 storage operation permitting, de-risking, and optimization in mafic and ultramafic reservoirs.

Cao, Ruoshi↗
DOE OSTI2026

Synergistic Evolution of Segmental Motion and Cooperative Relaxation within the Amorphous Phase of Organic Mixed Ionic-Electronic Conductors

Organic mixed ionic-electronic conductors (OMIECs) facilitate a variety of electrochemical processes and feature a heterogeneous microstructure composed of both crystalline and amorphous phases. However, structural evolution in amorphous regions during electrochemical doping remains poorly understood, limiting our understanding of mixed conduction mechanisms. Here, in this work, we develop operando chip calorimetry to probe amorphous phase evolution in poly­(3,4-ethylenedioxythiophene):poly­(styrenesulfonate) (PEDOT:PSS) under swelling and electrochemical (de)­doping. Our results reveal that amorphous regions providing ionic transport pathways and those within electronic transport channels undergo heterogeneous, yet synergistic, evolution during electrochemical modulation. The cooperative interplay between segmental motion and relaxation maintains ionic conductivity and intergrain electronic transport upon electrowetting and doping, while facilitating efficient ion hopping and adaptable chain conformations during dedoping. Such synergies are more pronounced in loose structures featuring a fibrillar morphology, which exhibit lower glass transition temperatures (T g ) and higher fragility (m). High-throughput robotic screening further establishes a strong correlation between elevated m/T g ratios and enhanced mixed conduction. These findings elucidate the role of the amorphous phase in the synthesis of OMIECs and underscore the potential of operando chip calorimetry in uncovering structure–property relationships in electroactive polymers.

amorphous phase↗
DOE OSTI2024

Heterogeneous Nucleating Agent for High‐Boiling‐Point Nonhalogenated Solvent‐Processed Organic Solar Cells and Modules

Abstract High‐boiling‐point nonhalogenated solvents are superior solvents to produce large‐area organic solar cells (OSCs) in industry because of their wide processing window and low toxicity; while, these solvents with slow evaporation kinetics will lead excessive aggregation of state‐of‐the‐art small molecule acceptors (e.g. L8‐BO), delivering serious efficiency losses. Here, a heterogeneous nucleating agent strategy is developed by grafting oligo (ethylene glycol) side‐chains on L8‐BO (BTO‐BO). The formation energy of the obtained BTO‐BO; while, changing from liquid in a solvent to a crystalline phase, is lower than that of L8‐BO irrespective of the solvent type. When BTO‐BO is added as the third component into the active layer (e.g. PM6:L8‐BO), it easily assembles to form numerous seed crystals, which serve as nucleation sites to trigger heterogeneous nucleation and increase nucleation density of L8‐BO through strong hydrogen bonding interactions even in high‐boiling‐point nonhalogenated solvents. Therefore, it can effectively suppress excessive aggregation during growth, achieving ideal phase‐separation active layer with small domain sizes and high crystallinity. The resultant toluene‐processed OSCs exhibit a record power conversion efficiency (PCE) of 19.42% (certificated 19.12%) with excellent operational stability. The strategy also has superior advantages in large‐scale devices, showing a 15.03‐cm 2 module with a record PCE of 16.35% (certificated 15.97%).

Chemistry↗
DOE OSTI2020

TDP-43 α-helical structure tunes liquid–liquid phase separation and function

Liquid–liquid phase separation (LLPS) is involved in the formation of membraneless organelles (MLOs) associated with RNA processing. The RNA-binding protein TDP-43 is present in several MLOs, undergoes LLPS, and has been linked to the pathogenesis of amyotrophic lateral sclerosis (ALS). While some ALS-associated mutations in TDP-43 disrupt self-interaction and function, here we show that designed single mutations can enhance TDP-43 assembly and function via modulating helical structure. Using molecular simulation and NMR spectroscopy, we observe large structural changes upon dimerization of TDP-43. Two conserved glycine residues (G335 and G338) are potent inhibitors of helical extension and helix–helix interaction, which are removed in part by variants at these positions, including the ALS-associated G335D. Substitution to helix-enhancing alanine at either of these positions dramatically enhances phase separation in vitro and decreases fluidity of phase-separated TDP-43 reporter compartments in cells. Furthermore, G335A increases TDP-43 splicing function in a minigene assay. Therefore, the TDP-43 helical region serves as a short but uniquely tunable module where application of biophysical principles can precisely control assembly and function in cellular and synthetic biology applications of LLPS.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Structural mechanism for modulation of functional amyloid and biofilm formation by Staphylococcal Bap protein switch

The Staphylococcal Bap proteins sense environmental signals (such as pH, [Ca 2+ ]) to build amyloid scaffold biofilm matrices via unknown mechanisms. We here report the crystal structure of the aggregation-prone region of Staphylococcus aureus Bap which adopts a dumbbell-shaped fold. The middle module (MM) connecting the N-terminal and C-terminal lobes consists of a tandem of novel double-Ca 2+ -binding motifs involved in cooperative interaction networks, which undergoes Ca 2+ -dependent order-disorder conformational switches. The N-terminal lobe is sufficient to mediate amyloid aggregation through liquid-liquid phase separation and maturation, and subsequent biofilm formation under acidic conditions. Such processes are promoted by disordered MM at low [Ca 2+ ] but inhibited by ordered MM stabilized by Ca 2+ binding, with inhibition efficiency depending on structural integrity of the interaction networks. Furthermore, these studies illustrate a novel protein switch in pathogenic bacteria and provide insights into the mechanistic understanding of Bap proteins in modulation of functional amyloid and biofilm formation, which could be implemented in the anti-biofilm drug design.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Response of Indian summer monsoon rainfall to remote carbonaceous aerosols at short time scales: Teleconnections and feedbacks

The effect of atmospheric aerosols on Indian monsoon is one of the scientifically challenging and societally relevant research issues of the recent decades. Past studies have derived inferences mostly based on local emissions and their impacts thereupon. However, more recent studies have shown that the remote effects driven by aerosols elsewhere could also impact the monsoon system on different time scales. Our study using an atmospheric general circulation model (AGCM) shows that regional carbonaceous aerosol emissions (from North America, Europe and North Africa and Asia) can significantly alter Indian summer monsoon rainfall. It is interesting to note that the effects of remote aerosols are larger and bear a resemblance to each other in comparison to local emissions. Here, our study reveals that the modulation of large-scale circulation induced by regional warming by carbonaceous aerosols leads to teleconnection patterns around the globe, thereby changing the precipitation depending on the phase of these disturbances. We also find that the effects of remote carbonaceous aerosols are strengthened by modulation/feedback through natural dust aerosols over the Arabian Sea with subsequent increase in rainfall over India. The results signify that the changes in the aerosol emissions in one region could lead to the change in precipitation over other regions through global teleconnection and associated feedbacks induced by regional atmospheric warming and/or cooling.

Carbonaceous aerosols↗
DOE OSTI2026

Nanocluster Rearrangement Forms a Family of Ordered Cerium–Titanium Bimetallic Metal–Organic Frameworks with Three Different Nodes, Nanocavities, and Thermal Stabilities

Metal–organic frameworks (MOFs) provide a versatile platform for incorporating multiple metal ions within a single crystalline framework, yet achieving spatial and stoichiometric order in heterometallic nodes remains a synthetic challenge. Building on our previously reported, highly thermally stable Ce/Ti bimetallic MOF NU-3000, we identified and isolated two additional crystalline phases, NU-2998 and NU-2999, that arise from the same Ce/Ti nanocluster precursor under modified solvothermal conditions. Systematic variation of reaction temperature, time, solvent ratio, and modulator concentration directs the assembly of these distinct frameworks. Structural analysis and comprehensive characterization studies reveal that these MOFs each feature an unreported nodal geometry with nanocavities of different sizes. NU-2998 even adopts an unreported topology, denoted nui , that features an elongated pore spanning 4 nm. Together, these findings establish a synthesis route that starts with a nanocluster and ends with a set of bimetallic MOFs, offering a glimpse into the pathway-dependent assembly of multimetallic porous materials. Finally, we evaluated the thermal stability of each additional analogue and compared them to NU-3000, providing further insight into material stability. NU-3000 maintained the highest thermal stability and was evaluated as a catalyst for CO oxidation at elevated temperatures.

bimetallic MOFs↗