Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Parameter Identifiability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

A Proposal for A Lean, Fast Mars Round-Trip Mission Architecture: Using Current Technologies for A Human Mission to Mars In The 2030s

We present a lean-minded, fast-transfer mission strategy and architecture concept for a first human mission to Mars that deliberately utilizes a current-technology-favored approach by means of introducing and quantitatively dening two pivotal parameters: 1) an end-to-end Mars mission duration of approximately one year, and 2) a deep space habitat of approximately 4050 metric tons. These parameters are identified and introduced by a 2012 deep space habitat study conducted at the NASA Johnson Space Center (JSC) that focused on a subset of recognized high-engineering-risk factors that may otherwise inhibit or encumber remote space travel to destinations such as Mars or near-Earth asteroids (NEAs). Additional constraints in the study favoring current technology and a lean-minded (very short) surface stay on Mars are shown to offer such Mars mission opportunities in the 2030s, enabled by a combination of on-orbit staging, mission element pre-positioning, and unique round-trip trajectories identied by state-of-the-art astrodynamics algorithms.

Architecture↗
NASA NTRS2019

Tonal Noise Control Using Rotor Phase Synchronization

The purpose of this study is to determine if phase synchronization can be used to reduce the net radiated sound power from two rotors. Phase synchronization implies that the rotors have the same rotational speed with a fixed relative azimuthal blade position, or phase. The concept is evaluated both experimentally and numerically. Measurements of source directivity and thrust are initially compared with predictions to confirm that the model accurately captures the relevant trends. The model is then used to explore the design space and identify relevant parameters. Both experimental and numerical results show that the radiated sound power at the blade passage frequency can be reduced by appropriately controlling the relative azimuthal phase of the rotors. Vehicle level predictions are also provided for a notional octocopter, comparing two different modes of operation. Predictions show that phase synchronization can be used to achieve a 4-5 dB reduction of the sound pressure level at the blade passage frequency nearly everywhere on the ground plane beneath the vehicle.

Noah H Schiller↗
NASA NTRS2020

Near Earth Network (NEN) Users’ Guide

The purpose of this document is to describe the technical capabilities of the ground stations that comprise the National Aeronautics and Space Administration (NASA) Near Earth Network (NEN). This document provides sufficient information to enable project engineers and support personnel to begin interfacing with the NEN. It is not intended to be a technical description of network equipment; rather, it defines NEN capabilities and identifies those parameters of particular interest to the user. For more detailed information, see the documents cited in Section 1.3. NEN capabilities evolve based on user requirements and budget limitations. New projects can be assured of NEN capabilities agreed to in their Radio Frequency Interface Control Document (RFICD).

Telemetry↗
NASA NTRSDate not supplied

Comparative Analysis of Thermal Conversion Technologies for Deep Space Missions

Radioisotope power systems (RPS) utilizing Plutonium-238 as a heat source for thermal-to-electric energy conversion have been used as a reliable power source for NASA’s deep space missions for sixty years. Recent innovations and improvements to thermal energy technologies show potential increases to radioisotope system efficiencies from current measurements of ~5-7% to efficiencies upwards of 20%. This report surveys and ranks recent, innovative thermal-to-electric energy conversion research technologies. Technologies being developed at universities and industry are compared with respect to thermal conversion method and relevant key performance parameters. Key performance parameters are identified as system specific power per kg, efficiency, power output, technology readiness level, and system mass. Analytical Hierarchy Process (AHP) was utilized to create weighted values for each evaluation criterion. The AHP tables combined with decision matrices create table scores for past, present, and potential future systems. The table score was combined with a conversion method score in an adjustable system to add value to flight-proven or well-tested thermal conversion technologies such as thermoelectrics. While the three highest-ranking systems reviewed are currently being developed by NASA’s RPS Program, the additional highest-ranking systems not under-development by RPS could warrant further research.

Radioisotope Power System↗
NASA NTRS2023

Distributed Ground Sensor Fusion Based Object Tracking for Autonomous Advanced Air Mobility Operations

Autonomous operations are a crucial aspect in the context of Advanced Air Mobility and other emerging aviation markets. In order to enable this autonomy, an accurate and detailed understanding of the positions of the various vehicles in the air is necessary. Full localization independent of on-board sensors makes the system suitable for noncooperative vehicles. This paper focuses on the object tracking part that relies on distributed ground-based sensor fusion, considering specific properties and limitations of different sensor types. Results show satisfactory performance in nominal scenarios with full coverage. Dropouts of individual sensors affect the accuracy of the tracking results, which agrees with expectations for partial coverage, when full localization is not achievable anymore. Finally, a study is performed to identify which parameters have the largest impact on the fit error.

Autonomous↗
NASA NTRS2020

Continuity of A Global, Satellite-Based Terrestrial Primary Productivity Dataset in the VIIRS Era Achieved With Model-Data Fusion

The NASA Terra and Aqua satellites have been successfully operating for over two decades and have far exceeded their original 5‐year design life. However, the era of NASA’s Earth Observing System (EOS) may be coming to a close as early as 2023. We conducted a comprehensive calibration and validation of the MODIS MOD17 product [1,2] and the potential for continuity of multi‐decadal ecosystem gross primary productivity (GPP) and annual net primary productivity (NPP), using data from the Visible Infrared Imaging Radiometer Suite (VIIRS) sensors aboard Suomi NPP and NOAA‐20. We combined an 18‐year record of eddy covariance flux tower measurements with hundreds of field measurements of NPP from the Oak Ridge National Laboratories Multi‐Biome collection to benchmark MODIS MOD17 Collection 6.1 (C61) and to develop the first terrestrial productivity estimates from VIIRS. Plant traits from the literature and the global TRY database [3,4] provide strong priors for identifying model parameters in a Bayesian model‐data fusion. As MODIS‐like observations are still needed for global environmental applications, the new VIIRS VNP17 product has the potential to extend these continuous estimates of global, terrestrial primary productivity beyond 2030.

K. Arthur Endsley↗
NASA NTRS2022

Long-Term Variation of Aerosol Optical Properties Associated With Aerosol Types Over East Asia Using AERONET and Satellite (VIIRS, OMI) Data (2012–2019)

We analyzed annual and seasonal frequency in aerosol type over an 8-year period (2012–2019) to identify aerosol parameter trends over four ground sites and country regions in Korea, China, and Japan by using the Aerosol Robotic Network (AERONET), and the satellite-based Visible Infrared Imaging Radiometer Suite (VIIRS) and Ozone Monitoring Instrument (OMI). Decreasing trends are shown for aerosol optical depth (AOD), Ångstr¨om exponent (AE), and fine mode fraction (FMF) in all countries. The decreasing trend in these data is considered to be due to a decrease in anthropogenic emissions. For the aerosol type frequency, decreases in the proportions of carbonaceous aerosols (CA) and non-absorbing aerosols (NA) were shown in the ground and satellite data, respectively. At most sites, the fractions of low AOD case (LOW) increased, whereas those of the Black and Brown Carbon (BC + BrC) category decreased. In Seoul, the fraction of LOW increased from 48.9% to 70.0%, and that of BC + BrC decreased continuously from 20.4% to 11.1% during 2012–2019. Beijing, on the other hand, showed decreasing LOW from 83.3% (2012) to 52.0% (2019), and that of BC + BrC increased significantly, from 2.4% to 26.2%. The satellite data showed that the percentage of LOW increased continuously, while that of NA aerosols decreased continuously in East Asia. A noticeable decrease in the fraction of CA was detected in China [21.5% (2013) to 11.2% (2019)]. In all countries, CA and NA aerosols had the greatest effect in winter and summer, respectively. We also detected significant differences between the fractions of NA and BC between the ground and satellite data. Changes in aerosol type and properties were observed concurrently in all ground and satellite data, and changes in aerosol type may explain the increasing and decreasing trends that we recorded for most parameters. Consistent results from both ground and satellite data suggest a steady decreasing in fine aerosol pollution in East Asia.

Sujin Eom↗
NASA NTRSDate not supplied

Probabilistic Approach to Assessing CCRS Capture System Performance Margin

In the aerospace industry, there are standard design principles and/or rule-of-thumb targets that define healthy levels of margins required at each developmental milestone for traditional metrics, such as mass, thermal, and power margins. When the technical resource is “non-traditional” in the sense that guiding margin principles are non-existent, systems engineering judgment is required to internally generate performance targets and methodologies to assess the system against the derived targets. This paper presents a probabilistic approach for assessing complex time-critical operations in order to apply global sensitivity analyses to identify input parameters that should (or should not) serve as design drivers.

Performance Margins↗
NASA NTRS2023

Drought-Tolerant Succulent Plants as an Alternative Crop Under Future Global Warming Scenarios in Sub-Saharan Africa

Globally, we are facing an emerging climate crisis, with impacts to be notably felt in semiarid regions across the world. Cultivation of drought-adapted succulent plants has been suggested as a nature-based solution that could: (i) reduce land degradation, (ii) increase agricultural diversification and provide both economic and environmentally sustainable income through derived bioproducts and bioenergy, (iii) help mitigate atmospheric CO 2 emissions and (iv) increase soil sequestration of CO 2 . Identifying where succulents can grow and thrive is an important prerequisite for the advent of a sustainable alternative ‘bioeconomy’. Here, we first explore the viability of succulent cultivation in Africa under future climate projections to 2100 using species distribution modelling to identify climatic parameters of greatest importance and regions of environmental suitability. Minimum temperatures and temperature variability are shown to be key controls in defining the theoretical distribution of three succulent species explored, and under both current and future SSP5 8.5 projections, the conditions required for the growth of at least one of the species are met in most parts of sub-Saharan Africa. These results are supplemented with an analysis of potentially available land for alternative succulent crop cultivation. In total, up to 1.5 billion ha could be considered ecophysiologically suitable and available for succulent cultivation due to projected declines in rangeland biomass and yields of traditional crops. These findings may serve to highlight new opportunities for farmers, governments and key stakeholders in the agriculture and energy sectors to invest in sustainable bioeconomic alternatives that deliver on environmental, social and economic goals.

agriculture↗
NASA NTRSDate not supplied

Probabilistic Approach to Assessing Capture System Performance Margin in Mars Sample Return's Capture, Containment, and Return System

In the aerospace industry, there are standard design principles and/or rule-of-thumb targets that define healthy levels of margins required at each developmental milestone for traditional metrics, such as mass, thermal, and power margins. When the technical resource is “non-traditional,” in the sense that guiding margin principles are non-existent, systems engineering processes are required to internally generate performance targets and methodologies to assess the system against the derived targets. This paper presents a probabilistic approach for assessing complex time-critical operations which applies global sensitivity analyses to identify input parameters that should drive the design. This approach is used to design a critical payload required for the Mars Sample Return campaign aiming at bringing back rock and atmospheric samples from Mars.

Performance Margins↗
NASA NTRS2024

Modeling Soft X‐Ray Emissions at the Dayside Magnetopause

In this study, we simulate the Solar Wind Charge Exchange (SWCX) soft X-ray emissions at dayside magnetosheath and cusps by using magnetohydrodynamic (MHD) and LAtmos TEst Particle (LaTeP) models. MHD models are unable to resolve the particle kinetic effects, such as the different behaviors of ions with different q/m, or distinguish the magnetospheric plasma from the solar wind plasma. We investigate these effects with the LaTeP model. As the LaTeP model does not self-compute magnetic and electric field, the magnetic and electric field data obtained from Open Geospace General Circulation Model (OpenGGCM) and Lagrangian version of the piecewise parabolic method (PPMLR) MHD model are used as the input to LaTeP model. The soft X-ray emissivity maps simulated from pure OpenGGCM and PPMLR MHD approaches and from LaTeP-OpenGGCM and LaTeP-PPMLR approaches are presented and compared. The results indicate that the LaTeP model can well resolve the kinetic effects and can be used to investigate the individual spectral characteristics. Therefore, the LaTeP model is a complementary approach for simulating the X-ray emissions near the dayside magnetopause. We also calculate the ratio of integrated OVII/OVIII line intensities, produced by charge exchange of O7+ ions and O8+ ions, respectively. We find a relatively higher ratio at the bow shock compared to the surrounding areas, suggesting that this ratio can be an effective parameter to identify the bow shock location.

Qiuyu Xu↗
DOE OSTI2011

Design And Verification of Controllers for Coupled Bunch Instabilities Using Optimal Control Theory And Numerical Simulation: Predictions for PEP II

We present a technique for the design and verification of efficient bunch-by-bunch controllers for damping longitudinal multibunch instabilities. The controllers attempt to optimize the use of available feedback amplifier power - one of the most expensive components of a feedback system - and define the limits of the closed loop system performance. Our design technique alternates between analytic computation of single bunch optimal controllers and verification on a multibunch numerical simulator. The simulator uses PEP-II parameters and identifies unstable coupled bunch modes, their growth rates and their damping rates with feedback. The results from the simulator are shown to be in reasonable agreement with analytical calculations based on the single bunch model. The technique is then used to evaluate the performance of a variety of controllers proposed for PEP-II.

43 PARTICLE ACCELERATORS↗
DOE OSTI2018

Assessment of the Economic Potential of Distributed Wind in Colorado, Minnesota, and New York

Stakeholders in the small and distributed wind space require access to better tools and data for more informed decisions on high-impact topics, including project planning, policymaking, and funding allocation. A major challenge in obtaining improved information is in the identification of favorable sites - namely, the intersection of sufficient wind resource with economic parameters such as retail rates, incentives, and other policies. This presentation made at the AWEA WINDPOWER Conference and Exhibition in Chicago in 2018 explores the researchers' objective: To understand the spatial variance of key distributed wind parameters and identify where they intersect to form pockets of favorable areas in Colorado, Minnesota, and New York.

17 WIND ENERGY↗
DOE OSTI2020

Enhanced Dynamic Equivalent Identification Method of Large-Scale Power Systems Using Multiple Event

The increasing complexity of the interconnected power system makes high-fidelity dynamic simulation models computationally more intensive. To improve computation efficiency, model reduction techniques have been investigated to only preserve the dynamics in a limited area of interest (study area), while deriving equivalent representation for the external area. For this purpose, a measurement-based reduction approach using system identification techniques has been previously proposed. In that case, external areas are represented by dynamic equivalent loads using transfer function estimation. In this paper, in order to enhance the accuracy of the reduced model in preserving dynamics of the study area, multiple “grid” events of different types and at different locations are considered for identifying the parameters of the equivalent loads. Case studies are carried out in the NPCC 140-bus system. Comparison are made between multiple events training and single event training, highlighting the advantages of the proposed method in providing a better representation of the grid dynamics under different operating conditions.

Xue, Yaosuo↗
DOE OSTI2020

GOOML: Geothermal Operational Optimization with Machine Learning

Geothermal Operational Optimization with Machine Learning (GOOML) is a project focused on maximizing increased availability and capacity from existing industrial-scale geothermal generation assets. The GOOML project will develop a suite of machine learning-based algorithms that analyze historical production datasets and provide predictive setpoints for geothermal field operations. Historical datasets from New Zealand and the US will provide the input to develop digital geothermal system twins which allow prediction of market conditions, maintenance operations and steamfield optimization. The algorithms will identify key parameters within fields and suggest setpoints for components of the system to maintain optimal generation. Set-points can be instructed to follow mass flow restrictions, generation maximization and optimal field/reservoir balance and give field operators a guide by which generation can be optimized. The datasets that will be used to develop GOOML are sourced from operating geothermal fields in New Zealand and the United States with varying degrees of complexity. This will ensure that most geothermal systems can utilize the GOOML tool to assist in optimizing operations. GOOML aims to achieve a step-change in geothermal operations by developing state-of-the-art machine learning algorithms, comprehensive data analytics, and a first-of-its-kind automated, intelligent geothermal system model.

algorithms↗
DOE OSTI2021

Economic and Environmental Assessment of Biological Conversions of Agile BioFoundry (ABF) Bio-Derived Chemicals

Bio-derived chemicals are an essential part of the growing bioeconomy. They possess the potential to boost a new domestic bioproduct industry, improve the sustainability of integrated biomanufacturing, and reduce U.S. dependence on fossil energy. The Agile BioFoundry (ABF) consortium, a Department of Energy (DOE)-sponsored collaboration, is investigating biobased pathways to produce advantaged products including advanced biofuels, fuel intermediates, and bioproducts. ABF is integrating advanced computational tools for biological engineering, process design and data analysis, and economic/sustainability modeling tools into a comprehensive and dynamic platform for biomanufacturing of microbes and using them to produce key metabolic intermediates or beachhead molecules which may be derivatized into several distinct bioproducts of industrial interest. In this presentation, we first discuss a methodology to select a single exemplar product molecule to represent each beachhead pathway based on similarities with other end-molecule options (yields/titers/rates, fermentation operation mode, oxygen requirements, general separations challenges, etc.), in order to maintain a reasonable number of cases for rigorous process simulation. We then use techno-economic analysis (TEA) and life-cycle analysis (LCA) to highlight sensitivities and trends around economic performance and environmental footprint, reflecting examples for two selected ABF technology pathways to bio-derived chemicals: 1) adipic acid production via muconic acid fermentation from mixed sugars with Pseudomonas putida and 2) cineole via geranyl diphosphate with Rhodosporidium toruloides. We present multi-variable scan plots highlighting key drivers on costs and greenhouse gas emissions in order to identify the parameter space in which each pathway could ultimately achieve economic and environmental sustainability meeting or exceeding commodity product benchmarks, thus prioritizing future R&D focus areas.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2016

Fuel Performance Simulation of Iron-Chrome-Aluminum Cladding during Steady-State LWR Operation

During a severe accident scenario, such as a loss-of-coolant accident, a nuclear reactor may lose its capacity to cool its fuel. The fuel rod temperatures begin to increases, quickly reaching temperatures where the coolant begins to evaporate. This lowers the coolant level in the core and eventually uncovers the fuel. Without sufficient heat transfer from the fuel rods to the coolant, the temperature of the fuel and cladding will increase dramatically. In the case of traditional zirconium-based alloys, as the temperature of the cladding reaches ∼1200 deg. C the zirconium rapidly begins to oxidize with H{sub 2}O in the coolant and steam. This oxidation reaction causes both thinning of the Zr-alloy cladding as the metal reacts and releases large amounts of H{sub 2} gas into the reactor pressure vessel. In order to increase the safety margin of LWR fuel in severe accident scenarios, several alternative cladding materials have been proposed to replace the currently used zirconium-based alloys. Of these materials, there is a particular focus on select iron-chrome-aluminum (FeCrAl) alloys because of slower oxidation Kinetics in high temperature steam than zirconium-based alloys. This increased oxidation resistance may provide additional coping time to mitigate any further damage resulting from an accident. However, by changing the cladding material, the neutronic characteristics of the core will change. FeCrAl alloys exhibit thermal neutron absorption cross sections nearly ∼12-16 x greater than Zr-alloys. This decreases the reactivity of the core, subsequently decreasing the potential cycle length for operation. To counteract this, fissile material may be added in the form of increased enrichment or increased fuel mass or the cladding thickness might be decreased, effectively reducing the neutronic penalty from using the alloy. In this study, all three changes are considered. To assess the viability of FeCrAl as an alternative cladding to Zr-alloys, engineering-scale fuel performance analysis is used to monitor the cladding and integral fuel rod behavior through its operation. Ongoing work is being performed to identify key parameters essential to modeling FeCrAl alloys for LWR applications and properly model fuel compliance and stress relief mechanisms for UO{sub 2} fuel. To improve the predictive capability of fuel performance codes for FeCrAl cladding under normal operation, high-fidelity mechanistic/physics-based material models are needed. This information can be generated and improved by access to experimental data on targeted FeCrAl alloys. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗