Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PYROXENE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

The distribution of olivine in the crater Copernicus

Multispectral imaging in the visible and near-IR at four wavelengths (0.73, 0.96, 1.45, and 1.99 micron) of Copernicus crater has been used to map the distribution of olivine-rich, pyroxene-poor material known previously to occur in the central peak complex. Three additional portions of the crater exhibit spectral characteristics similar to those of the central peaks, strongly suggesting the presence of material similar to that exposed in the central peaks. These areas are a scarp forming a portion of the northern rim of Copernicus, and two slump blocks in the north wall which may have been derived from the same portion of the ejecta now exposed in the rim scarp. These occurrences decrease the minimum allowable depth for this unusual material in the Copernicus target site though still represent some of the deepest material exposed by Copernicus.

Lucey, Paul G.↗
NASA NTRS1991

Iodine-xenon, chemical, and petrographic studies of Semarkona chondrules - Evidence for the timing of aqueous alteration

The relationship of the I-Xe system of the Semarkona meteorite to other measured properties is investigated via INAA, petrographic, and noble-gas analyses on 17 chondrules from the meteorite. A range of not less than 10 Ma in apparent I-Xe ages is observed. The three latest apparent ages fall in a cluster, suggesting the possibility of a common event. It is argued that the initial I-129/I-127 ratio (R0) is related to chondrule type and/or mineralogy, with nonporphyritic and pyroxene-rich chondrules showing evidence for lower R0s than porphyritic and olivine-rich chondrules. Chondrules with sulfides on or near the surface have lower R0s than other chondrules. The He-129/Xe-132 ratio in the trapped Xe component anticorrelates with R0, consistent with the evolution of a chronometer in a closed system or in multiple systems. It is concluded that the variations in R0 represent variations in ages, and that later events, possibly aqueous alteration, preferentially affected chondrules with nonporphyritic textures and/or sulfide-rich exteriors about 10 Ma after the formation of the chondrules.

Swindle, T. D.↗
NASA NTRS1992

Redox effects in ordinary chondrites and implications for asteroid spectrophotometry

The sensitivity of reflectance spectra to mean ferrous iron content and olivine and pyroxene proportion enhancements in the course of metamorphic oxidation is presently used to examine whether metamorphically-induced ranges in mineralogy, and corresponding spectral parameters, may explain the observed variations in S-asteroid rotational spectra. The predicted spectral variations within any one chondrite class are, however, insufficient to account for S-asteroid rotational spectra, and predicted spectral-range slopes have a sign opposite to the rotational measurements. Metamorphic oxidation is found unable to account for S-asteroid rotational spectra.

Mcsween, Harry Y., Jr.↗
NASA NTRS1992

Age and isotopic relationships among the angrites Lewis Cliff 86010 and Angra dos Reis

The paper presents results of a wide-ranging isotopic investigation of the the Antarctic angrite LEW-86010 (LEW), and reassesses the type angrite Angra dos Reis (ADOR) in order to obtain precise radiometric ages and initial Sr isotopic compositions, and to search for the erstwhile presence of the short-lived nuclei Sm-146 and Al-26 via their daughter products. The isotopic compositions of Sm, U, Ca, and Ti were measured to allow a detailed appraisal to be made of the relations between, and the geneology of, these two angrites. LEW proves to be severely contaminated with modern terrestrial Pb, which is shown to result from terrestrial weathering. Concordant Pb-Pb model ages of pyroxene separates are obtained; uranium isotopic compositions are normal within error. Overall, striking age and isotopic similarities between LEW and ADOR were found, suggesting almost simultaneous production on the same asteroid, even though recent experimental studies imply that the two are not comagmatic.

Lugmair, G. W.↗
NASA NTRS1992

A unique, (almost) unaltered spinel-rich fine-grained inclusion in Kainsaz

A unique, spinel-rich, extremely porous fine-grained inclusion in the Kainsaz (CO3) meteorite is reported. This inclusion is the least altered fine-grained inclusion yet discovered, having escaped almost entirely the secondary alterations experienced by Allende fine-grained inclusions. The inclusion is comprised of loosely packed 5-30 microns spinel grains mantled by thin layers of melilite, anorthite, and diopsidic pyroxene. The inclusion, which has over 30 vol pct void space, is one of the most spinel-rich, most porous fine-grained inclusions seen to date. The mineralogy of the inclusion matches that which has been predicted for a precursor of the altered mineral assemblages of Allende fine-grained inclusions, though a lack of interstitial material in the Kainsaz inclusion reduces the likelihood of a direct genetic relationship between the two (Allende fine-grained inclusions contain abundant interstitial material). Its mineralogical composition confirms that the precursors of other, more altered, fine-grained inclusions were assemblages of refractory minerals exclusively.

Holmberg, B. B.↗
NASA NTRS1992

Hong Kong is an impact crater: Proof from the geomorphological and geological evidence

Hong Kong is a city in southern China. The urban districts of Hong Kong, Kowloon, and Victoria Harbour are situated within Hong Kong. Hong Kong is surrounded by mountains with a diameter of 11 km. Three million people live inside the basin. The round structure of the mountains in Hong Kong has been describd as a granite dome that is deeply eroded (batholith). The circularity of the mountains, the existence of a central hill, the inner slope of the mountains being greater than the outer slope, the presence of deep layer rock inside the basin, and the depth-to-diameter ratio were studied. All this evidence shows that the Hong Kong structure satisfies the geomorphological requirement of an impact crater. Some shock metamorphic phenomena of the rocks in Hong Kong such as planar features, microspherilitic silica glass (lechaterlierite), fused margins of rock fragments, concussion fractures, impact glass in which some schlierens are consistent with pyroxene spiculites, etc., were first discovered in Oct. 1990. In Hong Kong Island, an impact melt sheet was observed from the Victoria Peak to the southern shore. Quenching fractures of quartz in Kowloon fine-grained granite was also discovered. In our work, the K-Ar age (83.34 + 1.26 m.y.) of the impact melt rock, which is younger in comparison to the K-Ar age (117 m.y.) in Hong Kong and Kowloon granite, was measured, and the phenomena indicate that after the granite body formed, there was another geologic event. Maybe it is the Hong Kong cratering event.

Chan, Chu-Lok↗
NASA NTRS1992

Thermobarometric studies on the Levack Gneisses: Footwall rocks to the Sudbury Igneous Complex

Granulite and amphibolite facies gneisses and migmatites of the Levack Gneiss Complex occupy a zone up to 8 km wide around the northern part of the Sudbury Igneous Complex (SIC). Orthopyroxene- and garnet-bearing tonalitic and semipelitic assemblages of granulite facies grade occur within 3 km of the SIC together with lenses of mafic and pyroxenitic rock compositions normally represented by an amphibole +/- cpx-rich assemblage; amphibolite facies assemblages dominate elsewhere in this terrain. These 2.711-Ga gneisses were introduced by (1) the Cartier Granite Batholith during late Archaean to early Proterozoic time and (2) the SIC, at 1.85 Ga, which produced a contact aureole 1-1.5 km wide in which pyroxene hornfelses are common within 200-300 m of the contact. A suite of 12 samples including both the opx-gt and amphibole-rich rock compositions have been studied. Garnets in the semipelitic gneisses are variably replaced by a plg-bio assemblage. Thermobarometric calculations using a variety of barometers and thermometers reported in the literature suggest that the granulite facies assemblages formed at depths in the 21-28 km range (6-8 kbar). Textures and mineral chemistry in the garnet-bearing semipelitic rocks indicate that this terrain underwent a second metamorphic event during uplift to depth in the 5-11 km range (2-3 kbar) and at temperatures as low as 500-550 C. This latter event is distinct from thermal recrystallization caused by the emplacement of the SIC; it probably represents metamorphism attributable to intrusion of the Cartier Granite Batholith. These data allow two interpretations for the crustal uplift of the Levack Gneisses: (1) The gneisses were tectonically uplifted prior to the Sudbury Event (due to intrusion of the Cartier Batholith); or (2) the gneisses were raised to epizonal levels as a result of meteorite impact at 1.85 Ga.

James, R. S.↗
NASA NTRS1992

Lunar cement

With the exception of water, the major oxide constituents of terrestrial cements are present at all nine lunar sites from which samples have been returned. However, with the exception of relatively rare cristobalite, the lunar oxides are not present as individual phases but are combined in silicates and in mixed oxides. Lime (CaO) is most abundant on the Moon in the plagioclase (CaAl2Si2O8) of highland anorthosites. It may be possible to enrich the lime content of anorthite to levels like those of Portland cement by pyrolyzing it with lunar-derived phosphate. The phosphate consumed in such a reaction can be regenerated by reacting the phosphorus product with lunar augite pyroxenes at elevated temperatures. Other possible sources of lunar phosphate and other oxides are discussed.

Agosto, William N.↗
NASA NTRS1992

Cement and concrete

To produce lunar cement, high-temperature processing will be required. It may be possible to make calcium-rich silicate and aluminate for cement by solar heating of lunar pyroxene and feldspar, or chemical treatment may be required to enrich the calcium and aluminum in lunar soil. The effects of magnesium and ferrous iron present in the starting materials and products would need to be evaluated. So would the problems of grinding to produce cement, mixing, forming in vacuo and low gravity, and minimizing water loss.

Corley, Gene↗
NASA NTRS1992

Refining the granulite suite

Early studies of rocks retrieved from the Moon during the Apollo missions defined a group of rocks as granulites or 'granulitic impactites'. This included rocks with cataclastic, granulitic, and poikilitic or poikiloblastic textures. Petrographic studies indicate that the textures of 'granulitic breccias' are significantly varied so as to redefine the granulitic suite into at least two distinct groups. The first group consists of rocks that have true granulitic textures: polygonal to rounded, equant grains that are annealed, and have triple junctions with small dispersions from the average 120 degrees. The second group of rocks have poikilitic or poikiloblastic textures, with subhedral to euhedral plagioclase and/or olivine grains enclosed in pyroxene oikocrysts. In some instances, the relationship between the minerals resembles an orthocumulate texture. Rocks previously thought of as granulites may have formed in more than one way. These formation mechanisms are briefly discussed.

Taylor, G. Jeffrey↗
NASA NTRS1992

Possible petrogenetic associations among igneous components in North Massif soils: Evidence in 2-4 mm soil particles from 76503

Studies of Apollo 17 highland igneous rocks and clasts in breccias from the North and South Massifs have described magnesian troctolite, norite, anorthositic gabbro, dunite, spinel cataclasites, and granulitic lithologies that may have noritic anothosite or anorthositic norite/gabbro as igneous precursors, and have speculated on possible petrogenetic relationships among these rock types. Mineral compositions and relative proportions of plagioclase and plagioclase-olivine particles in samples 76503 indicate that the precursor lithology of those particles were troctolitic anorthosite, not troctolite. Mineral and chemical compositions of more pyroxene-rich, magnesian breccias and granulites in 76503 indicate that their precursor lithology was anorthositic norite/gabbro. The combination of mineral compositions and whole-rock trace-element compositional trends supports a genetic relationship among these two groups as would result from differentiation of a single pluton. Although highland igneous lithologies in Apollo 17 materials have been described previously, the proportions of different igneous lithologies present in the massifs, their frequency of association, and how they are related are not well known. We consider the proportions of, and associations among, the igneous lithologies found in a North Massif soil, which may represent those of the North Massif or a major part of it.

Jolliff, Bradley L.↗
NASA NTRS1992

Lithologies contributing to the clast population in Apollo 17 LKFM basaltic impact melts

LKFM basaltic impact melts are abundant among Apollo lunar samples, especially those from Apollo 15, 16, and 17. They are generally basaltic in composition, but are found exclusively as impact melts. They seem to be related to basins and so could represent the composition of the lower lunar crust. They contain lithic clasts that cannot be mixed in any proportion to produce the composition of the melt matrix; components rich in transition elements (Ti, Cr, Sc) and REE are not considered. To search for the mysterious cryptic component, we previously investigated the mineral clast population in two Apollo 14 LKFM basaltic impact melts, 15445 and 15455. The cryptic component was not present in the mineral clast assemblage of these breccias either, but some olivine and pyroxene grains appeared to be from lithologies not represented among identified igneous rocks from the lunar highlands. In addition, none of the mineral clasts could be unambiguously assigned to a ferroan anorthosite source. We have now extended this study to Apollo 17, starting with two LKFM impact melt breccias (76295 and 76315) from the Apollo 17 station 6 boulder. The results from the study are presented.

Norman, Marc D.↗
NASA NTRS1992

Troctolitic anorthosite from 77115: A magnesian member of the alkalic suite

Alkalic suite pristine nonmare rocks are distinctly enriched in plagiophile elements such as Na and K, as well as generally incompatible elements, despite modes and textures more characteristic of typical crustal cumulates (most commonly anorthosites) than of the basaltic KREEP rocks that appear to account for the bulk of the lunar crust's total complement of incompatible elements. Our studies indicate that the 77115 troctolitic clasts of Winzer et al. is actually a troctolitic anorthosite (or anorthositic troctolite), probably best classified as a member of the alkalic suite. We managed to obtain a thin section with pyroxene and olivine, and analyzed a 13.4-mg chip by instrumental neutron activation analysis (INAA). The results of this analysis are briefly discussed.

Warren, Paul H.↗
NASA NTRS1992

Reduction of iron-bearing lunar minerals for the production of oxygen

The kinetics and mechanism of the reduction of simulants of the iron-bearing lunar minerals olivine ((Fe,Mg)2SiO4), pyroxene ((Fe,Mg,Ca)SiO3), and ilmenite (FeTiO3) are investigated, extending previous work with ilmenite. Fayalite is reduced by H2 at 1070 K to 1480 K. A layer of mixed silica glass and iron forms around an unreacted core. Reaction kinetics are influenced by permeation of hydrogen through this layer and a reaction step involving dissociated hydrogen. Reaction mechanisms are independent of Mg content. Augite, hypersthene, and hedenbergite are reduced in H2 at the same temperatures. The products are iron metal and lower iron silicates mixed throughout the mineral. Activation energy rises with calcium content. Ilmenite and fayalite are reduced with carbon deposited on partially reduced minerals via the CO disproportionation reaction. Reduction with carbon is rapid, showing the carbothermal reduction of lunar minerals is possible.

Massieon, Charles↗
NASA NTRS1992

Beneficiation of ilmenite from lumar analog

The results reported were obtained on a meteoric eucrite sample called Millbillillie Sample no. 173. Optical microscopy studies of the sample showed it to consist of ilmenite, troilite, and transparent gangue. The transparent gangue consisted of feldspar (anorthite), pyroxenes, olivines, and opaques. Troilite was present in minor quantities. Screen assay analyses of the 30, 100, 200, and 400 US mesh screen fractions showed that minor concentration of titanium occurred in the 200 x 400 and -400 mesh screen fractions. Scanning electron microscopy (SEM) studies of the bulk sample showed the presence of a variety of ilmenite grains, ranging from 50 microns down to less than 1 micron without any evidence of liberation. Electron Diffraction Scans (EDS) confirmed the ratio of Fe to Ti in the ilmenite grains. Dry magnetic separation in a Frantz Isodynamic Separator was found to be effective only at sizes finer than 150 microns (100 US mesh) and more so at 200 mesh (74 microns). In each case, dedusting of the sample to remove -400 mesh (-0.037 microns) fines was required. Liberation size was determined to be 200 mesh and finer. The highest grade concentrate assaying 3.45 percent Ti was produced by magnetic separation of the -200 + 400 mesh screen fraction assaying 0.44 Ti (from a -30 mesh sample) at a current setting of 0.35 AMP. This concentrate contained 21.2 percent of the Ti values in the screen fraction with 2.72 weight percent of feed to test. The results can be projected to a sample stage ground to -200 mesh. Magnetic separation of the 200 + 400 mesh (-0.074 + 0.037 microns) should produce a concentrate accounting for 1.41 weight percent of the feed. This concentrate will analyze 3.45 percent Ti and contain 10.3 percent of the Ti values in the feed. By changing the Frantz Magnetic Separator settings, a lower grade concentrate analyzing 0.98 percent Ti can be produced at an increased recovery of 25.4 percent. The concentrate weight will be 11.7 percent of the feed. It must be emphasized that improved grades and recoveries can be obtained with the -400 mesh fines. However, beneficiation of these extremely fine materials is not possible in a practical process scheme.

Ramadorai, G.↗
NASA NTRS1992

Magnetic beneficiation of lunar soils

We will present a review of recent laboratory results obtained in dry magnetic separation of one gram samples of the minus 1 mm size fraction of five lunar soils of widely differing maturities. Two highland soils were investigated as potential sources of low iron content feed stocks for space manufacture of metals, including aluminum, silicon, and calcium. Pure anorthite was separated from the diamagnetic fraction of immature highland regolith. Three high titanium mare soils were investigated as potential sources of ilmenite for production of hydrogen and for recovery of He-3. Ilmenite and pyroxene were separated from the paramagnetic fractions of the mare basalts. Agglutinates and other fused soil components containing metallic iron were separated from the strongly magnetic fractions of all soils. We will present conceptual magnetic separation flow sheets developed from the laboratory data and designed for production of anorthite from highland soils and for production of ilmenite from mare soils. Using these flow sheets, we will discuss problems and opportunities associated with the magnetic separation of lunar soils. Separation of high-grade anorthite or other diamagnetic components at moderately high recovery can be achieved in processing immature highland soils. Further, while magnet weight is always an issue in magnetic separation technology, recent developments in both low temperature and high temperature superconductivity present unusual opportunities for magnet design specific to the lunar environment.

Mckay, D. S↗
NASA NTRS1992

An experimental evaluation of mineral-specific comminution

The comminution behavior of different mineral species subjected to incessant impact is investigated using targets consisting of 2-4-mm crystals of albite, augite, forsterite, of quartz, which were impacted at least 25 times at 1.4 km/sec by 3.18-mm stainless-steel spheres. Sieve analyses were performed after every five shots. It was found that the behaviors of the feldspar and quartz were virtually indistinguishable and that the olivine target produced the greatest proportion of fines. The pyroxene target was most resistant to comminution. The comminution was only mildly dependent on grain size.

Cintala, Mark J.↗
NASA NTRS1992

The moon - Mid-infrared (7.5- to 11.4-microns) spectroscopy of selected regions

Scaled spectral emissivity spectra have been obtained from five locations on the illuminated lunar surface and are interpreted in terms of differences in their mineralogic composition. The emission maximum, which typically falls near 8.0 microns for lunar rocks and fines, is observed to be shifted from 7.9 microns for noritic Copernicus crater walls to 8.1 microns for the olivine-rich central peak. Two mare locations show the emission maximum centered at 8.0 microns, consistent with laboratory emission measurements of basalts. An emissivity minimum at 10.5 microns in the spectrum from central peak 2 is attributed to the presence of olivine. Minima centered at 8.75 microns in the crater wall spectra resemble minima in laboratory spectra from pyroxene. A broad minimum centered at 8.5 microns in the Kepler ejecta spectrum and a sharp drop in emissivity at wavelengths longer than 11 microns in spectra from both mare locations suggest plagioclase.

Sprague, A. L.↗