SEARCH · Engineering Papers

Results for “PROGRAMMER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

All sources NASA NTRS DOE OSTI

NASA NTRS1972

S-cubed-a spacecraft and experiment description

The launch of the Explorer 45 satellite and the instruments installed in the satellite are discussed. The scientific objectives of the first mission, the orbital parameters, and the capabilities of the data system are examined. The satellite is designed to carry out investigations of specific magnetospheric phenomena in the heart of the magnetosphere. The data handling system is programmable from the ground for greater flexibility.

Longanecker, G. W.↗

NASA NTRS1971

A flexible high-speed sequential decoder for deep space channels.

This paper describes a sequential decoding machine built at the Jet Propulsion Laboratory (JPL), which uses a 3-bit quantization of the code symbols and achieves a computation rate of MHz. This machine is flexible and can be programmed to decode any complementary convolutional code with rates down to 1/4 and constraint lengths up to 32. In addition, metric programmability is provided for optimization of decoder performance with respect to channel parameter variations.

Layland, J. W.↗

NASA NTRS1972

Electronic systems for the new multichannel spectrometer at Sacramento Peak.

Description of the design features and operation of a new multichannel solar spectrometer to be used for ground-based observations of active regions whose X-ray and EUV emissions are studied by the OSO-H and other satellites. The electronic systems associated with the instrument include (1) an electrooptical guider controlled by a punched paper tape capable of making raster scans of selected portions of the solar disk, (2) a programmer unit that applies paper-tape commands to various portions of the instrument, (3) a closed-loop servosystem for the vacuum heliostat, (4) stepping motor controls for spectral scans, (5) a 40-channel photomultiplier readout, and (6) a magnetometer. Preliminary solar observations indicate satisfactory performance of the system.

Hobbs, R. W.↗

NASA NTRS1972

Computers formed by the problems rather than problems deformed by the computers.

Description of an approach to computer programming which tries to minimize the time required for retranslation from the computer language into the language of the original process. A notion of a programmable network is introduced which allows the abstract machines that are a model of the processes in the user's mind to be put into a rigorous and simple form. Each process is then modeled as a particular finite-state machine, a circulating page loose system being employed as an architecture for implementing these finite-state machines. An experiment is discussed in which the use of abstract machines as a language for modeling processes, in conjunction with the use of a self-organizing computer, decreases user effort, eliminates the need for compilation, facilitates debugging, and decreases computer time.

Schaffner, M. R.↗

NASA NTRS1973

Characteristics of FORTRAN

Publication is announced which outlines source program differences between IBM 360, UNIVAC 1108, CDC 6000, and Honeywell Series 32 computer systems. Publication can be guide to programmer in converting existing program from one computer system to another.

Garner, W. R.↗

NASA NTRS1973

Automatic carrier acquisition system for phase-lock-loop receivers

Programmable oscillator and zero-beat detector acquires phase-lock of carrier by frequency scanning. Generation of high-level dc pulse at instant of zero crossing provides positive trigger for decision gate to stop search and close loop for phase-coherent tracking.

Bunce, R. C.↗

NASA NTRS1972

A computer assisted teleoperator control station with tactile feedback

A computer-assisted teleoperator control system for making comparative performance evaluations is described. A local and a remote control station, each with decision-making capability, communicate with each other through a simulated time delay. Supervisory control at three increasingly automatic levels is possible. The highest level of programmed control is facilitated through the ARM language which was developed to permit easily readable program manuscripts to be written and assembled into programs of motions by novice programmers. Experimental results show the advantage of this form of supervisory control with both direct and delayed (3 sec) manipulation tasks. In addition, two systems to measure and reproduce force distributions have been designed. One system reproduces contact on the external surfaces of the remote hand using 21 airjet simulators. Another system reproduces the shape of the contact between object and jaws using 288 piezoelectric (bimorph) stimulators.

Hill, J. W.↗

NASA NTRS1972

Random Experiment Program Resource Impact (REPRI) program: User's manual

A complete user and programmer guide for the REPRI program is presented. This program was developed to perform mission concept, subsystem capability, and experiment support compatibility studies for a space station. The program utilizes Monte Carlo techniques to randomly schedule events in discrete intervals. Resources, logistics, cost, and space station volume are considered.

Pease, W. T.↗

NASA NTRS1972

Computer controlled antenna system

The application of small computers using digital techniques for operating the servo and control system of large antennas is discussed. The advantages of the system are described. The techniques were evaluated with a forty foot antenna and the Sigma V computer. Programs have been completed which drive the antenna directly without the need for a servo amplifier, antenna position programmer or a scan generator.

Raumann, N. A.↗

NASA NTRS1973

Study of feasibility of solid-state electric switch gear for aircraft and spacecraft

The design of a solid-state circuit breaker that can be interconnected to a second breaker to form a transfer switch is presented. The breaker operates on a nominal 270-V dc circuit and controls power to loads of up to 15 A. Automatic overload trip is provided as a function of excess energy measured through the breaker and/or excess current through the breaker. After an overload trip, up to nine preprogrammable attempts to reclose may be tried with programmable delays between each attempt. The breaker or switch is remotely controllable. Test data on performance in the laboratory over temperatures from -45 to 100 C are provided. The feasibility of solid-state switch gear has been established.

Buchanan, E.↗

NASA NTRS1970

Program documentation with advanced data management systems

The problems of program documentation are considered for those cases in which the programmer is using a computer along with an advanced DMS. Three problem areas discussed include: data description, process description, and execution-time documentation.

Swift, W. B.↗

NASA NTRS1972

Users manual for Streamtube Curvature Analysis: Analytical method for predicting the pressure distribution about a nacelle at transonic speeds, volume 1

The computer program, Streamtube Curvature Analysis, is described for the engineering user and for the programmer. The user oriented documentation includes a description of the mathematical governing equations, their use in the solution, and the method of solution. The general logical flow of the program is outlined and detailed instructions for program usage and operation are explained. General procedures for program use and the program capabilities and limitations are described. From the standpoint of the grammar, the overlay structure of the program is described. The various storage tables are defined and their uses explained. The input and output are discussed in detail. The program listing includes numerous comments so that the logical flow within the program is easily followed. A test case showing input data and output format is included as well as an error printout description.

Keith, J. S.↗

NASA NTRS1973

Small Interactive Image Processing System (SMIPS) users manual

The Small Interactive Image Processing System (SMIP) is designed to facilitate the acquisition, digital processing and recording of image data as well as pattern recognition in an interactive mode. Objectives of the system are ease of communication with the computer by personnel who are not expert programmers, fast response to requests for information on pictures, complete error recovery as well as simplification of future programming efforts for extension of the system. The SMIP system is intended for operation under OS/MVT on an IBM 360/75 or 91 computer equipped with the IBM-2250 Model 1 display unit. This terminal is used as an interface between user and main computer. It has an alphanumeric keyboard, a programmed function keyboard and a light pen which are used for specification of input to the system. Output from the system is displayed on the screen as messages and pictures.

Moik, J. G.↗

NASA NTRS1971

Optimization techniques for FORTRAN 4 (G and H) programs written for the IBM 360 under OS

A fairly complete list is reported of programming techniques which are available to the programmer for optimizing the execution time of production programs written in FORTRAN IV (G and H) for the IBM 360 under OS. After the program has been complied under FORTRAN H, OPT=2, then the process of actually changing code begins. The bulk of execution time of FORTRAN programs can almost always be attributed to a few loops, and primary consideration is given to these.

Dean, J. L.↗

NASA NTRS1973

Analyses of requirements for computer control and data processing experiment subsystems: Image data processing system (IDAPS) software description (7094 version), volume 2

A description of each of the software modules of the Image Data Processing System (IDAPS) is presented. The changes in the software modules are the result of additions to the application software of the system and an upgrade of the IBM 7094 Mod(1) computer to a 1301 disk storage configuration. Necessary information about IDAPS sofware is supplied to the computer programmer who desires to make changes in the software system or who desires to use portions of the software outside of the IDAPS system. Each software module is documented with: module name, purpose, usage, common block(s) description, method (algorithm of subroutine) flow diagram (if needed), subroutines called, and storage requirements.

Source record↗

NASA NTRS1973

Aerodynamic thermal simulation system. Part 1: Radiant array (instruction manual)

An aerodynamic thermal simulation system (ATSS) is presented. The construction of the system, the maintenance, set up, and operations are reported. System description of the radiant array is given along with the array subsystems modular heating unit, adjustable stanchion frame, cooling water system, and the gaseous nitrogen cooling system. The array configuration procedure outlines the set up and the start up. Maintenance procedures involve both lamp maintenance and reflector maintenance along with weather protection. Drawing codes are included. Descriptions of the 36 zone ATSS controls are also given. Each zone is an independent closed loop temperature control circuit. Procedures are presented for starting and stopping the system. The DATA-TRAK programmer and its operation, instruction manuals for the temperature controller and the power regulator and discriptions of peripheral equipment are discussed.

Kitchar, A. F.↗

NASA NTRS1972

Echo movement and evolution from real-time processing.

Preliminary experimental data on the effectiveness of conventional radars in measuring the movement and evolution of meteorological echoes when the radar is connected to a programmable real-time processor are examined. In the processor programming is accomplished by conceiving abstract machines which constitute the actual programs used in the methods employed. An analysis of these methods, such as the center of gravity method, the contour-displacement method, the method of slope, the cross-section method, the contour crosscorrelation method, the method of echo evolution at each point, and three-dimensional measurements, shows that the motions deduced from them may differ notably (since each method determines different quantities) but the plurality of measurement may give additional information on the characteristics of the precipitation.

Schaffner, M. R.↗

NASA NTRS1972

An operational data compression system using minicomputers.

Functional description of the real-time programmable data compression system that has been developed for operation between the data acquisition and satellite service ground stations and the ATS 1 and 3 satellites. The source data consist of TV pictures from these satellites that are received, compressed, transmitted, and reconstructed in real-time. General purpose minicomputers and specially designed I/O channels are used for compression and reconstruction. The installed compression system has passed all system input-output tests. Because of the great flexibility of the minicomputers, it is possible to vary the compression and to perform auxiliary tasks, such as data formatting.

Davisson, L. D.↗