Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRODUCTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

A modular approach for high-flux lactic acid production from methane in an industrial medium using engineered Methylomicrobium buryatense 5GB1

Abstract Convergence of market drivers such as abundant availability of inexpensive natural gas and increasing awareness of its global warming effects have created new opportunities for the development of small-scale gas-to-liquid (GTL) conversion technologies that can efficiently utilize methane, the primary component of natural gas. Leveraging the unique ability of methanotrophs that use methane as carbon and energy source, biological GTL platforms can be envisioned that are readily deployable at remote petroleum drilling sites where large chemical GTL infrastructure is uneconomical to set-up. Methylomicrobium buryatense, an obligate methanotroph, has gained traction as a potential industrial methanotrophic host because of availability of genetic tools and recent advances in its metabolic engineering. However, progress is impeded by low strain performance and lack of an industrial medium. In this study, we first established a small-scale cultivation platform using Hungate tubes for growth of M. buryatense at medium-to-high-throughput that also enabled 2X faster growth compared to that obtained in traditional glass serum bottles. Then, employing a synthetic biology approach we engineered M. buryatense with varying promoter (inducible and constitutive) and ribosome-binding site combinations, and obtained a strain capable of producing l-lactate from methane at a flux 14-fold higher than previously reported. Finally, we demonstrated l-lactate production in an industrial medium by replacing nitrate with less-expensive ammonium as the nitrogen source. Under these conditions, l-lactate was synthesized at a flux approximately 50-fold higher than that reported previously in a bioreactor system while achieving a titer of 0.6 g/L. These findings position M. buryatense closer to becoming an industrial host strain of choice, and pave new avenues for accelerating methane-to-chemical conversion using synthetic biology.

Garg, Shivani↗

Production of monodisperse cerium oxide microspheres with diameters near 100 µm by internal-gelation sol–gel methods

Cerium dioxide microspheres with uniform diameters between 65 – 211 µm were fabricated using internal gelation sol-gel methods. Although uniform microspheres are produced for nuclear fuel applications with diameters above 300 µm, sol-gel microspheres with diameters of 50 - 200 µm have historically been made by emulsion techniques and had poor size uniformity [1, 2]. An internal gelation, sol-gel apparatus was designed and constructed to accommodate the production of small, uniform microspheres whereby cerium-containing solutions were dispersed into flowing silicone oil and heated in a gelation column to initiate solidification [3, 4]. Problems with premature feed gelation and microsphere coalescence were overcome by equipment modifications unique among known internal gelation setups. Microspheres were fabricated and sized in batches as a function of dispersing needle diameter and silicone oil flow rate in the two-fluid nozzle in order to determine the range of sizes possible and corresponding degree of monodispersity. Initial experiments with poor size uniformity were linked to microsphere coalescence in the gelation column prior to solidification as well as excessive flow rates for the cerium feed solution. Average diameter standard deviations as low as 2.23% were observed after optimization of flow rates and minimization of coalescence reactions.

cerium oxide↗

Light-driven hydrogen production from Photosystem I-catalyst hybrids

Solar energy conversion of water into environmentally clean fuels, such as hydrogen, offers one of the best long-term solutions for meeting future global energy needs. In photosynthesis, high quantum yield charge separation is achieved by a series of rapid, photoinitiated electron transfer steps that take place in proteins called reaction centers (RCs). Of current interest are new strategies that couple RC photochemistry to the direct synthesis of energy-rich molecules, offering opportunities to more directly tune the products of photosynthesis and potentially to increase solar energy conversion capacity. Innovative designs link RC photochemistry with synthetic molecular catalysts to create earth abundant biohybrid complexes that use light to rapidly produce hydrogen from water.

biohybrid↗

Titration-based screening for evaluation of natural product extracts: identification of an aspulvinone family of luciferase inhibitors

The chemical diversity of nature has tremendous potential for the discovery of molecular probes and medicinal agents. However, sensitivity of HTS assays to interfering components of crude extracts derived from plants, and macro- and microorganisms has curtailed their use in lead discovery. Here, we describe a process for leveraging the concentration-response curves obtained from quantitative HTS to improve the initial selection of actives from a library of partially fractionated natural product extracts derived from marine actinomycetes and fungi. By using pharmacological activity, the first-pass CRC paradigm improves the probability that labor-intensive subsequent steps of reculturing, extraction, and bioassay-guided isolation of active component(s) target the most promising strains and growth conditions. We illustrate how this process identified a family of fungal metabolites as potent inhibitors of firefly luciferase, subsequently resolved in molecular detail by X-ray crystallography.

59 BASIC BIOLOGICAL SCIENCES↗

Experimental and computational investigations of sulfur-resistant bimetallic catalysts for reforming of biomass gasification products

A combination of density functional theory (DFT) calculations and experimental studies of supported catalysts was used to identify H{sub 2}S-resistant biomass gasification product reforming catalysts. DFT calculations were used to search for bimetallic, nickel-based (1 1 1) surfaces with lower sulfur adsorption energies and enhanced ethylene adsorption energies. These metrics were used as predictors for H{sub 2}S resistance and activity toward steam reforming of ethylene, respectively. Relative to Ni, DFT studies found that the Ni/Sn surface alloy exhibited enhanced sulfur resistance and the Ni/Ru system exhibited an improved ethylene binding energy with a small increase in sulfur binding energy. A series of supported bimetallic nickel catalysts was prepared and screened under model ethylene reforming conditions and simulated biomass tar reforming conditions. The observed experimental trends in activity were consistent with theoretical predictions, with observed reforming activities in the order Ni/Ru > Ni > Ni/Sn. Interestingly, Ni/Ru showed a high level of resistance to sulfur poisoning compared with Ni. This sulfur resistance can be partly explained by trends in sulfur versus ethylene binding energy at different types of sites across the bimetallic surface.

09 BIOMASS FUELS↗

Global methane emissions from coal mining to continue growing even with declining coal production

This paper presents projections of global methane emissions from coal mining under different coal extraction scenarios and with increasing mining depth through 2100. The paper proposes an updated methodology for calculating fugitive emissions from coal mining, which accounts for coal extraction method, coal rank, and mining depth and uses evidence-based emissions factors. A detailed assessment shows that coal mining-related methane emissions in 2010 were higher than previous studies show. This study also uses a novel methodology for calculating methane emissions from abandoned coal mines and represents the first estimate of future global methane emissions from those mines. The results show that emissions from abandoned mines increase faster than those from active ones. Using coal production data from six integrated assessment models, this study shows that by 2100 methane emissions from active underground mines increase by a factor of 4, while emissions from abandoned mines increase by a factor of 8. Abandoned mine methane emissions continue through the century even with aggressive mitigation actions.

coal mine methane, abandoned coal mine methane, em↗

Theoretical study of the electronic, thermodynamic, and thermo-conductive properties of y-LiAlO2 with 6Li isotope substitutions for tritium production

Lithium aluminate has attracted researchers’ interests due to its wide applications. The structural, electronic, optical, lattice phonon thermodynamic, and thermo-conductive properties of ?-LiAlO2 with 6Li-isotope substitution are investigated by density functional theory and lattice phonon dynamics. The calculated results show that ?-LiAlO2 possesses a wide band-gap of 4.63 eV. The valence band is mainly formed by p orbitals of Li, O, and Al. The calculated lattice thermal conductivity of ?-LiAlO2 is found to be in good agreement over a wide range of temperatures with the available experimental data. The calculated dielectric matrix shows anisotropic behavior along z and x (or y) axes. Due to the wide band-gap, the optical conductivity of ?-LiAlO2 is mainly contributed from the electron hopping between valence-conduction bands. Substitution of 7Li with 6Li isotope in ?-LiAlO2 leads to observable differences in the lattice phonon frequencies at higher frequencies (>8THz) and to slight changes in corresponding thermal conductivity and the infrared and Raman spectra which are in good agreement with the measured data. The relevance of these properties for tritium production through 6Li absorbing neutron in nuclear reactors is discussed.

ab initio thermodynamics, ?-LiAlO2 and 6Li-isotope↗

Zinc-in-titania waste form for immobilizing lanthanide fission products from electrochemical reprocessing

This paper provides microstructural, microchemical, and bulk X-ray diffraction information for a zinc-in-titania waste form for immobilizing rare-earth oxide (REOx) fission products recovered through precipitation from electrochemical salt wastes. This waste form can be used to immobilize REOx at loadings as high as 40 mass% in a chemically durable matrix consisting of glass-bonded minerals including Zn2TiO4 as well as RE-containing phases of REOx, RE2Ti2O7, and REPO4 (monazite). Chemical durability data is also provided, and comparisons are drawn between this waste form and one made using a similar process with half the REOx loading.

rare earth, rare earth waste form, electrochemical↗