Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRISMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

SU-F-J-14: Kilovoltage Cone-Beam CT Dose Estimation of Varian On-Board Imager Using GMctdospp Monte Carlo Framework

Purpose: Although cone-beam CT (CBCT) imaging became popular in radiation oncology, its imaging dose estimation is still challenging. The goal of this study is to assess the kilovoltage CBCT doses using GMctdospp - an EGSnrc based Monte Carlo (MC) framework. Methods: Two Varian OBI x-ray tube models were implemented in the GMctpdospp framework of EGSnrc MC System. The x-ray spectrum of 125 kVp CBCT beam was acquired from an EGSnrc/BEAMnrc simulation and validated with IPEM report 78. Then, the spectrum was utilized as an input spectrum in GMctdospp dose calculations. Both full and half bowtie pre-filters of the OBI system were created by using egs-prism module. The x-ray tube MC models were verified by comparing calculated dosimetric profiles (lateral and depth) to ion chamber measurements for a static x-ray beam irradiation to a cuboid water phantom. An abdominal CBCT imaging doses was simulated in GMctdospp framework using a 5-year-old anthropomorphic phantom. The organ doses and effective dose (ED) from the framework were assessed and compared to the MOSFET measurements and convolution/superposition dose calculations. Results: The lateral and depth dose profiles in the water cuboid phantom were well matched within 6% except a few areas - left shoulder of the half bowtie lateral profile and surface of water phantom. The organ doses and ED from the MC framework were found to be closer to MOSFET measurements and CS calculations within 2 cGy and 5 mSv respectively. Conclusion: This study implemented and validated the Varian OBI x-ray tube models in the GMctdospp MC framework using a cuboid water phantom and CBCT imaging doses were also evaluated in a 5-year-old anthropomorphic phantom. In future study, various CBCT imaging protocols will be implemented and validated and consequently patient CT images will be used to estimate the CBCT imaging doses in patients.

60 APPLIED LIFE SCIENCES↗

Carbon nanoscrolls on the surface of nanocrystalline graphite and diamond films

Nanocrystalline graphite and diamond films with needlelike nanostructures on their surface have been obtained by plasma-enhanced chemical vapor deposition. According to the experimental data, these aggregates have the same nature for films of both types: they are tubular carbon nanoscrolls with a polygonal cross section. Nanoscrolls are formed by a helically folded graphene sheet; they look like twisted prisms. The needlelike prismatic structures have an average diameter in the range of 50‒500 nm, and their length reaches several micrometers. Possible mechanisms of formation of carbon nanostructures are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Scale-invariant streamline equations and strings of singular vorticity for perturbed anisotropic solutions of the Navier-Stokes equation

A linear combination of a pair of dual anisotropic decaying Beltrami flows with spatially constant amplitudes (the Trkal solutions) with the same eigenvalue of the curl operator and of a constant velocity orthogonal vector to the Beltrami pair yields a triplet solution of the force-free Navier-Stokes equation. The amplitudes slightly variable in space (large scale perturbations) yield the emergence of a time-dependent phase between the dual Beltrami flows and of the upward velocity, which are unstable at large values of the Reynolds number. They also lead to the formation of large-scale curved prisms of streamlines with edges being the strings of singular vorticity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dynamical Theory of X-Ray Diffraction for Restricted Beams: II. Diffuse Scattering by a Porous Crystal

A theory of X-ray diffuse scattering of restricted beams by a porous crystal is developed. Models of cylindrical and ellipsoidal pores, as well as the pores in the form of rectangular and triangular prisms, are considered. For these pores, the expressions for correlation eigenfunctions, static Debye—Weller factors, and correlation volumes are derived. The effect of the inclination and spatial correlation of pores on the equal-intensity diffuse-scattering contours is analyzed. The influence of the pore size fluctuation on the scattered intensity distribution is demonstrated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Antireflective nanostructured zinc oxide arrays produced by pulsed electrodeposition

Conditions for the pulsed electrochemical deposition of nanostructured zinc oxide arrays with a certain morphology, crystal structure, and optical properties from aqueous electrolytes onto substrates of transparent electrically conducting tin dioxide and on single-crystal silicon wafers with built-in homojunctions are studied in order to develop antireflection coatings for solar cells. It is shown that it is possible to obtain single-layer planar antireflection coatings or arrays of nanorods of this material, both having the form of hexagonal prisms and exhibiting the moth-eye effect.

36 MATERIALS SCIENCE↗

Wide-aperture total absorption of a terahertz wave in a nanoperiodic graphene-based plasmon structure

The terahertz absorption spectrum in a periodic array of graphene nanoribbons located on the surface of a dielectric substrate with a high refractive index (terahertz prism) is studied theoretically. The total absorption of terahertz radiation is shown to occur in the regime of total internal reflection of the terahertz wave from the periodic array of graphene nanoribbons, at the frequencies of plasma oscillations in graphene, in a wide range of incidence angles of the external terahertz wave even at room temperature.

36 MATERIALS SCIENCE↗

Computational Examination of Orientation-Dependent Morphological Evolution during the Electrodeposition and Electrodissolution of Magnesium

Here a new model of electrodeposition and electrodissolution is developed and applied to the evolution of Mg deposits during anode cycling. The model captures Butler-Volmer kinetics, facet evolution, the spatially varying potential in the electrolyte, and the time-dependent electrolyte concentration. The model utilizes a diffuse interface approach, employing the phase field and smoothed boundary methods. Scanning electron microscope (SEM) images of magnesium deposited on a gold substrate show the formation of faceted deposits, often in the form of hexagonal prisms. Orientation-dependent reaction rate coefficients were parameterized using the experimental SEM images. Three-dimensional simulations of the growth of magnesium deposits yield deposit morphologies consistent with the experimental results. The simulations predict that the deposits become narrower and taller as the current density increases due to the depletion of the electrolyte concentration near the sides of the deposits. Increasing the distance between the deposits leads to increased depletion of the electrolyte surrounding the deposit. Two models relating the orientation-dependence of the deposition and dissolution reactions are presented. Finally, the morphology of the Mg deposit after one deposition-dissolution cycle is significantly different between the two orientation-dependence models, providing testable predictions that suggest the underlying physical mechanisms governing morphology evolution during deposition and dissolution.

36 MATERIALS SCIENCE↗

WARP

WARP, which can stand for ``Weaving All the Random Particles,'' is a three-dimensional (3D) continuous energy Monte Carlo neutron transport code developed at UC Berkeley to efficiently execute on NVIDIA graphics processing unit (GPU) platforms. WARP accelerates Monte Carlo simulations while preserving the benefits of using the Monte Carlo method, namely, that very few physical and geometrical simplifications are applied. WARP is able to calculate multiplication factors, neutron flux distributions (in both space and energy), and fission source distributions for time-independent neutron transport problems. It can run in both criticality or fixed source modes, but fixed source mode is currently not robust, optimized, or maintained in the newest version. WARP can transport neutrons in unrestricted arrangements of parallelepipeds, hexagonal prisms, cylinders, and spheres. The goal of developing WARP is to investigate algorithms that can grow into a full-featured, continuous energy, Monte Carlo neutron transport code that is accelerated by running on GPUs. The crux of the effort is to make Monte Carlo calculations faster while producing accurate results. Modern supercomputers are commonly being built with GPU coprocessor cards in their nodes to increase their computational efficiency and performance. GPUs execute efficiently on data-parallel problems, but most CPU codes, including those for Monte Carlo neutral particle transport, are predominantly task-parallel. WARP uses a data-parallel neutron transport algorithm to take advantage of the computing power GPUs offer.

Bergmann, RyanM. [University of California - Berke↗

DBSchema_MTS

This is a collection of DDL files that define the database schema used by the Mass and Time Tag System (MTS) component of the Pan-Omics Research Information Storage and Management system (PRISM) at the Pacific Northwest National Laboratory (PNNL). MTS is used to track and quantify peptides and proteins identified in proteomics and related samples.

Monroe, Matthew↗

DMS Analysis Tool Manager

The DMS Analysis Tool Manager is a part of PRISM, the Proteomics Research Information and Management System. The analysis manager performs automated processing of available job steps, tracked by the in the DMS_Pipeline database. Plugin DLLs implement the processing details for each analysis tool.

Gibbons, Bryson↗

DMS Capture Task Manager

The DMS Capture Task Manager is a part of PRISM, the Proteomics Research Information and Management System. The capture manager processes instrument data files, copying them from the instrument to storage servers, validating the data, creating QC graphics, and pushing the data into MyEMSL. Plugin DLLs implement the processing details for each tool.

Gibbons, Bryson↗

DMS Organism Database Handler

Organism Database (FASTA file) programs, including PRISMSeq Uploader and the FastaFileMaker console application. This repository includes several software utilities for working with Protein Collections stored in PRISM, the Proteomics Research Information and Management System.

Auberry, Ken↗

DMS Program Runner Service

The DMS Program Runner (MultiProgRunner) is a Windows Service that can be configured to start specific programs on a regular interval. In the Proteomics Research Information and Management System (PRISM) the DMS Program runner Service is used to run manager programs at regular intervals.

Monroe, Matthew↗

DMS Space Manager

The DMS Space Manager is a part of PRISM, the Proteomics Research Information and Management System. The space manager monitors the free space on Proto-x storage servers, purging old dataset files to free up space if the available space drops below a threshold.

Monroe, Matthew↗

DMS Update Manager

The DMS Update Manager is used to keep automated processing manager software up-to-date. Although it is part of PRISM (the Proteomics Research Information and Management System), it is a standalone program and does not contact any databases. The program compares the files on a central distribution share to files on the local computer, updating any files that are out of date. It supports rolling back local files to an older version and auto-deleting extra files.

Monroe, Matthew↗

Data Import Manager

The Data Import Manager is a part of PRISM, the Proteomics Research Information and Management System. The Data Import Manager monitors a central folder for new dataset trigger files, which are XML files that specify metadata for new datasets to import into the Data Management System (DMS). The Data Import Manager validates the metadata in the XML trigger file, notifying the instrument operator by e-mail if invalid metadata is encountered. After processing each XML trigger file, the file is moved into either a success or failure folder.

Monroe, Matthew↗

Data Package Archive Manager

The Data Package Archive Manager is a part of PRISM, the Proteomics Research Information and Management System. The software scans data package folders and files, pushing new or changed files into MyEMSL.

Monroe, Matthew↗