Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Multilayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

X-ray reflectivity and total reflection x-ray fluorescence study of surface oxide evolution in a GaAs/AlAs multilayer system

Modifications of GaAs/air interface under x-ray exposure have been investigated by means of x-ray reflectometry (XRR). For this purpose a GaAs/AlAs multilayer system was continuously monitored for 90 h while acquiring XRR profiles. Three different starting models for the oxide/contaminants layer were tested for the analysis of XRR data and discussed. The main effect of x-ray exposure, revealed by the three different approaches, is an increase in the thickness of the gallium and arsenic oxides until a saturation value (about 3.0 nm) is reached after about 50 h. Total reflection x-ray fluorescence analysis performed on a couple of twin samples, either irradiated and nonirradiated, confirms that the oxidation process is promoted by x-ray exposure and indicates the presence of a richer As oxide phase at the surface of the x-ray irradiated samples.

36 MATERIALS SCIENCE↗

Quantification of Multilayer Samples by Confocal {mu}XRF

The confocal setup consists of x-ray lenses in the excitation as well as in the detection channel. In this configuration, a micro volume defined by the overlap of the foci of both x-ray lenses is analyzed. Scanning this micro volume through the sample, 1-3 dimensional studies can be performed. For intermediate thin homogeneous layers a scanning in the normal direction to the surface sample provides information of its thickness and elemental composition. For multilayer samples it also provides the order of each layer in the stratified structure. For the confocal setup, we used a glass monocapillary in the excitation channel and a monolithic half polycapillary in the detection channel. The experiment was carried out at the D09B beamline of the LNLS using white beam. In the present work, a new algorithm was applied to analyze in detail by confocal {mu}XRF a sample of three paint layers on a glass substrate. Using the proposed algorithm, information about thickness and elemental densities was obtained for each layer of these samples.

36 MATERIALS SCIENCE↗

An EXAFS Study Of The Binding Of Chromium, Mercury And Copper On Natural, Crosslinked And Multilayer Chitosan Films

The coordination environment of metal atoms involved in their adsorption on chitosan was studied by using EXAFS technique. Chromium, mercury and copper complexes were gotten on natural, crosslinked and multilayer chitosan films and the spectra of the distribution of neighbor atoms around the adsorbed central atom were obtained. All spectra were obtained in transmission mode and were collected around Hg (12284 eV) L edge, Cr (5989 eV) and Cu (8987 eV) K edges. For chromium ions, it was possible to observe that metal interaction is mainly performed on amino groups, on the other hand, it was not possible to distinguish if the metal interaction takes place preferentially on amino or hydroxyl group, for mercury and copper.

36 MATERIALS SCIENCE↗

Effect of varying bilayer spacing distribution on reaction heat and velocity in reactive Al/Ni multilayers

Self-propagating reactions in Al/Ni nanostructured multilayer foils are examined both experimentally and computationally to determine the impact of variations in reactant spacing on reaction properties. Heats of reaction and reaction velocities have been characterized as a function of average bilayer spacing for sputter-deposited, single-bilayer foils (having a uniform bilayer spacing) and for dual-bilayer foils (having two different bilayer spacings that are labeled thick and thin). In the latter case, the spatial distribution of the thick and thin bilayers is found to have a significant effect on reaction velocity, with coarse distributions leading to much higher reaction velocities than fine distributions. Numerical simulations of reaction velocity match experimental data well for most spatial distributions, with the exception of very coarse distributions or distributions containing very small bilayer spacings. A simple model based on thermal diffusivities and reaction velocities is proposed to predict when the spatial distribution of thick and thin bilayers becomes coarse enough to affect reaction velocity. This combination of experiment and simulation will allow for more effective design and prediction of reaction velocities in both sputter-deposited and mechanically processed reactive materials with variable reactant spacings.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Multilayered optical bit memory with a high signal-to-noise ratio in fluorescent polymethylmethacrylate

We report on the three-dimensional optical memory utilizing a photoluminescence (PL) change in polymethylmethacrylate. Irradiation with a femtosecond pulsed laser (800 nm, 1 kHz, 100 fs) induced a strong PL spectrum in the visible range, which may result from the photogeneration of emissive radicals. Multilayered patterns were recorded inside the bulk sample by tightly focusing a pulsed laser beam. The pattern images were read out by a reflection-type fluorescent confocal microscope which detected the blue-green emission at 410-510 nm. The stored bits were retrieved with a high signal-to-noise ratio in the absence of any cross-talk.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Two different coercivity lattices in Co/Pd multilayers generated by single-pulse direct laser interference lithography

We report on magnetic structuring of Co/Pd multilayer films with strong perpendicular magnetic anisotropy by single-pulse direct laser interference lithography technique. Multibeam laser interference generates patterns of various types. The intense laser irradiation at interference maxima causes chemical intermixing at Co/Pd interfaces, leading to local changes in magnetic properties such as the creation of pinning centers and the reduction in the strength of magnetic anisotropy. We use magnetic force microscopy and Kerr microscopy to study the magnetization reversal processes in the patterned samples and find that the structures show three distinctly different behaviors depending on the intensity of the laser used for irradiation.

36 MATERIALS SCIENCE↗

Tuning magnetization dynamic properties of Fe-SiO{sub 2} multilayers by oblique deposition

The static and dynamic magnetic properties of Fe-SiO{sub 2} multilayers fabricated onto Si(100) substrates by a radio frequency sputter-deposition system are investigated as functions of deposition angle and Fe thickness. By changing the oblique deposition angle, one can effectively tune the ferromagnetic resonance frequency from 1.7 to 3.5 GHz. In addition, the frequency linewidth is significantly changed with the oblique deposition angle when the Fe layer is thick, but it is almost constant in the case of small Fe thickness.

36 MATERIALS SCIENCE↗

Silicon-rich SiO{sub 2}/SiO{sub 2} multilayers: A promising material for the third generation of solar cell

Si-rich-SiO{sub 2}(SRSO)/SiO{sub 2} multilayers (MLs) have been grown by reactive magnetron sputtering. The presence of silicon nanoclusters (Si-ncls) within the SRSO sublayer and annealing temperature influence optical absorption as well as photoluminescence. The optimized annealing temperature has been found to be 1100 deg. C, which allows the recovery of defects and thus enhances photoluminescence. Four MLs with Si-ncl size ranging from 1.5 to 8 nm have been annealed using the optimized conditions and then studied by transmission measurements. Optical absorption has been modeled so that a size effect in the linear absorption coefficient alpha (in cm{sup -1}) has been evidenced and correlated with TEM observations. It is demonstrated that amorphous Si-ncl absorption is fourfold higher than that of crystalline Si-ncls.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of film texture on magnetization reversal and switching field in continuous and patterned (Co/Pd) multilayers

We studied the reversal properties of perpendicular anisotropy (Co/Pd) multilayers with different crystallographic textures. In case of continuous films, an increase in the coercivity and reduction in the switching field distribution (SFD) were observed as the growth is improved. From magnetic force microscopy, a stripe-type domain configuration was observed in films deposited at low gas pressure while a bubble-type domain was observed in high pressure deposited films. In patterned films, the SFD did not vary significantly for samples with different textures although a 2 kOe increase in the switching field was measured. In patterned structures, the controllability of SFD may not be related to the improvement of film crystallographic growth as was observed for unpatterned films. The results from this study indicate that local variation in the intrinsic film properties plays a major role in the SFD.

36 MATERIALS SCIENCE↗

Induced ferromagnetism in Mn{sub 3}N{sub 2} phase embedded in Mn/Si{sub 3}N{sub 4} multilayers

Room temperature ferromagnetism has been obtained for different sets of Mn/Si{sub 3}N{sub 4} multilayers prepared by sputtering. In order to find the most suitable conditions to stabilize the ferromagnetic ordering in this system, the evolution of the magnetic properties has been studied for films in which the Si{sub 3}N{sub 4} layer thickness was maintained constant while that of the Mn layer was varied, [Mn(t{sub m})/Si{sub 3}N{sub 4}(3.4 nm)]{sub n}, and conversely, in [Mn(0.7 nm)/Si{sub 3}N{sub 4}(t{sub sn})]{sub 43} samples, in which the Mn layer thickness was kept constant while varying the Si{sub 3}N{sub 4} layer thickness. Structural, compositional, electronic and magnetic characterizations have been performed by means of x-ray reflectometry, Rutherford backscattering spectrometry, x-ray photoemission spectroscopy, x-ray absorption, and superconducting quantum interference device for further knowledge of the magnetic-structural relationship in this system. Our results show that the peculiar magnetic behavior of these films is mainly related to the stabilization of a slightly distorted Mn{sub 3}N{sub 2} phase that is induced by the Si{sub 3}N{sub 4} at the interfaces. For samples with larger Mn layer thickness, metallic Mn and Mn{sub 3}N{sub 2} phases coexist, which leads to a reduction of the total magnetization per Mn atom due to the presence of metallic Mn. For small Mn layer thickness (t{sub m}<0.86 nm), where noncontinuous Mn{sub 3}N{sub 2} layers are formed, the magnetization decreases noticeably due to the superparamagnetic size limit. It has been found that the best conditions for the stabilization of the ferromagnetism in this system occur when both, the manganese-rich and the silicon nitride layers, are continuous and with similar thickness, close to 3.5 nm.

36 MATERIALS SCIENCE↗

Anisotropic strain-stress state and intermixing in epitaxial Mo(110)/Ni(111) multilayers: An x-ray diffraction study

The present study deals with the analysis of elastic strains and stresses in high-quality heteroepitaxial Mo/Ni superlattices with periods {Lambda} lying in the range 4.8-27.6 nm. The strain-stress state in this lattice-mismatched system grown under energetic deposition conditions (ion beam sputtering) is rather complex, resulting from three contributions: (i) intrinsic (growth) stress due to atomic peening, (ii) coherency stresses of opposite sign in the two elemental layers due to the observed Nishiyama-Wassermann epitaxial relationship Ni[110](111)||Mo[001](110), and (iii) interfacial mixing. The measurement of the lattice parameters of Mo and Ni sublayers in various crystallographic directions was performed by x-ray diffraction, using the sin{sup 2} {psi} method adapted for epitaxial layers. A large anisotropy of elastic strain and associated in-plane coherency stresses is revealed in the Mo sublayers, while for Ni sublayers no such behavior could be detected due to the superimposition of growth variants with threefold symmetry. Postgrowth ion irradiation with Ar ions at very low dose ({approx}0.2 dpa) was employed as a powerful tool to modify the intrinsic stress, thus providing additional data to be implemented in a triaxial strain-stress model, which enabled us to separate the different stress sources (intrinsic and coherency stresses) as well as to quantify the intermixing occurring during growth. This model, which has been successfully applied previously to Mo thin films, yields in the case of multilayer systems to the determination of the ''stress-free and defect-free'' lattice parameter, a{sub 0}, i.e., solely linked to chemical mixing. The linear dependence of a{sub 0} with {Lambda} observed in both sublayers reveals an interface-mediated chemical mixing mechanism, the extent of this interfacial mixing being much more pronounced in Mo sublayers than in Ni ones.

36 MATERIALS SCIENCE↗

Thermoelectric properties of electrically stressed Sb/Bi-Sb-Te multilayered films

Electrically stressed Bi-Sb-Te thin films have demonstrated markedly enhanced Hall mobility and moderately reduced carrier concentration. To lower electrical resistivity further, a Sb-inserted Bi-Sb-Te multilayer structure was prepared through consecutively sputtering Bi-Sb-Te and Sb layers followed by electric current stressing. The electrically stressed Sb/Bi-Sb-Te film demonstrates high carrier concentration and enhanced Hall mobility. We propose that the additional Sb supply suppresses electromigration-induced Sb depletion in crystal lattices, thus maintains high carrier concentration of the Bi-Sb-Te film. The presented approach provides a simple means to optimize thermoelectric properties of Bi-Sb-Te films.

36 MATERIALS SCIENCE↗

Size dependent strengthening mechanisms in sputtered Fe/W multilayers

We investigate size dependent strengthening mechanisms in sputtered Fe/W multilayers with individual layer thickness, h, varying from 1 to 200 nm. Microstructure analyses reveal that Fe/W has incoherent bcc/bcc interface when h is greater than 5 nm. When h decreases to 1-2.5 nm, the interface becomes semicoherent, and Fe and W show significant lattice distortions comparing to their bulk counterpart due to interface constraint. The layer thickness dependent drastic variations in x-ray diffraction profiles are simulated well by using an analytical model. Film hardness increases with decreasing h, and approaches a maximum value of 12.5 GPa when h is 1 nm. The layer thickness dependent film hardnesses are compared with analytical models. Koehler's image force plays a major role in determining the maximum strength of composites at smaller h.

36 MATERIALS SCIENCE↗

OPTIMIZATION OF LAYER DENSITIES FOR MULTILAYERED INSULATION SYSTEMS

Numerous tests of various multilayer insulation systems have indicated that there are optimal densities for these systems. However, the only method of calculating this optimal density was by a complex physics based algorithm developed by McIntosh. In the 1970's much data were collected on the performance of these insulation systems with many different variables analyzed. All formulas generated included number of layers and layer density as geometric variables in solving for the heat flux, none of them was in a differentiable form for a single geometric variable. It was recently discovered that by converting the equations from heat flux to thermal conductivity using Fourier's Law, the equations became functions of layer density, temperatures, and material properties only. The thickness and number of layers of the blanket were merged into a layer density. These equations were then differentiated with respect to layer density. By setting the first derivative equal to zero, and solving for the layer density, the critical layer density was determined. This method was checked and validated using test data from the Multipurpose Hydrogen Testbed which was designed using Mcintosh's algorithm.

36 MATERIALS SCIENCE↗

Strongly enhanced incorporation of oxygen into barium titanate based multilayer ceramic capacitors using water vapor

The reoxidation of sintered BaTiO{sub 3}-based multilayer ceramic capacitors (MLCCs) is currently an empirically determined, but poorly understood, procedure. In this work, the incorporation of oxygen into BaTiO{sub 3}-based MLCCs has been studied by means of isotope exchange annealing ({sup 18}O{sub 2}/{sup 16}O{sub 2}, {sup 1}H{sub 2}{sup 18}O/{sup 1}H{sub 2}{sup 16}O or {sup 2}H{sub 2}{sup 16}O/{sup 1}H{sub 2}{sup 16}O) and subsequent determination of the isotope profiles in the solid by secondary ion mass spectrometry. Oxygen isotope profiles in the barium titanate dielectric can be described by a bulk diffusion coefficient D* and a surface exchange coefficient k*. The values obtained for k* indicate that oxygen incorporation from H{sub 2}O is much faster than from dry O{sub 2}; it thus plays the key role in the reoxidation process.

36 MATERIALS SCIENCE↗

A W/B{sub 4}C Transmission Multilayer as an Achromatic Phase Shifter in the XUV: Some Experimental Aspects

Completing previous investigations we study a W/B{sub 4}C transmission multilayer with 350 periods each 1.74 nm as a phase shifter for polarization analysis between 720 eV and 1020 eV. The FWHM of the Bragg curve is as small as 0.18 deg. = 3 mrad and thus smaller than the inherent accuracy of most polarimeters. We discuss some of the experimental implications and limitations. We obtain a phase shift of up to {Delta} = 24 deg. through out the spectral range.

43 PARTICLE ACCELERATORS↗

Effects of total thickness on (001) texture, surface morphology, and magnetic properties of [Fe/Pt]{sub n} multilayer films by monatomic layer deposition

Atomic-scale [Fe/Pt]{sub n} multilayer films with different total thickness were prepared on thermally oxidized Si (100) substrates at room temperature by monatomic layer deposition using dc-magnetron and rf-magnetron sputtering. Effects of the total thickness on (001) texture, surface morphology, and magnetic properties of the postannealed films have been investigated. It is found that the particlelike structure films with perfect (001) texture and perpendicular magnetic anisotropy are obtained with a thickness of less than or equal to 6.5 nm. After 500 deg. C annealing, the films with thickness of 6.5 and 11.9 nm show very smooth surface. In addition, with increasing total thickness of the films, (001) texture and perpendicular magnetic anisotropy of the annealed films deteriorate, and the films become continuous in structure. The total thickness of the films also affects the exchange-coupling interaction among FePt magnetic grains and the magnetization reversal process.

36 MATERIALS SCIENCE↗

Swift Heavy Ion Irradiation Effect On Nanometer Range W/Fe Multilayers

The present study reports the effect of swift heavy ion irradiation on structural and magnetic properties of sputtered Fe/W multilayer structure (MLS) having a bilayer composition of [W(30A)/Fe(20A)]{sub 10BL}. The MLS was irradiated by 120 MeV Au{sup 9+} ions up to fluence of 4x10{sup 13} ions/cm{sup 2}. Structural study of pristine and irradiated MLS reveals that intra-layer microstructure of Fe-layers in the MLS becomes nano-crystalline on irradiation. Magnetic studies show increase in coercivity at higher fluence which may be due to increase in surface and interface roughness after recrystallization of Fe-layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗