Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mobile”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Limits to Electrical Mobility in Lead-Halide Perovskite Semiconductors

Semiconducting polycrystalline thin films are cheap to produce and can be deposited on flexible substrates, yet high-performance electronic devices usually utilize single crystal semiconductors, owing to their superior charge-carrier mobilities and longer diffusion lengths. Here we show that the electrical performance of polycrystalline films of metal-halide perovskites (MHPs) approaches that of single crystals at room temperature. Combining temperature-dependent terahertz conductivity measurements and ab initio calculations we uncover a complete picture of the origins of charge-carrier scattering in single crystals and polycrystalline films of CH 3 NH 3 PbI 3 . We show that Fröhlich scattering of charge carriers with multiple phonon modes is the dominant mechanism limiting mobility, with grain-boundary scattering further reducing mobility in polycrystalline films. We reconcile the large discrepancy in charge-carrier diffusion lengths between single crystals and films by considering photon reabsorption. Thus, polycrystalline films of MHPs offer great promise for devices beyond solar cells, including light-emitting diodes and modulators.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron Transport with Mobility, μ > 86 cm 2 /(V s), in a 74 nm Long Polyfluorene

The mobility of charges on conjugated polymers is a fundamentally important feature of these materials, but most fall far short of transport that might lead one to call them “molecular wires”. A commonly identified bottleneck is flexible dihedral angles between repeat units. Here we find a very high mobility, μ > 86 cm 2 /(V s), for electrons attached to polyfluorene polymers in isooctane, despite the presence of varied dihedral angles. In conclusion, the present data suggest that interactions with the surrounding medium may be a principal determinant of charge mobility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Side Chain Branch Point on Self Assembly, Structure, and Electronic Properties of High Mobility Semiconducting Polymers

Semiconducting polymers exhibiting lyotropic liquid-crystalline (LC) mesophases allow for precise control over crystallinity and crystallite orientation using scalable equilibrium processing techniques. The ability to control morphologies from molecular to macroscopic scales is desirable for optimizing polymer electronic devices such as field-effect transistors. LC mesophases can form in semiconducting polymers with branched side chains, but steric repulsion from the side chain structure increases π-stacking distances. This change in unit cell negatively impacts electronic transport, negating any improvements gained by achieving more favorable mesostructures. Herein, we show that the π-stacking distance in cyclopentadithiophene-benzothiadiazole donor–acceptor copolymers is successively shortened by moving the branch point further away from the conjugated backbone. These materials retain their favorable LC properties, and the change in unit cell is accompanied by a monotonic increase in charge carrier mobility in field effect transistors. Mobility values span from ~10 –4 to 0.41 cm2 V –1 s –1 , reaching their highest value when the branch point is furthest from the polymer backbone. Additionally, these LC materials can be aligned across large length scales on rubbed polyimide, resulting in an improvement of charge carrier mobility by a factor of 56 when comparing transistors fabricated parallel and perpendicular to the alignment direction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Additive-Induced Morphology Change of Polymer Film Enables Enhanced Charge Mobility and Faster Organic Electrochemical Transistor Switching

Conjugated polymers (CPs) play an important role in organic electrochemical transistors (OECTs) for bioelectronics and related applications, where they serve as channel materials. Currently, most successful polymers for CPs are re-engineered from traditional CPs by replacing hydrophobic alkyl side chains with hydrophilic ethylene glycol or ionic groups. Frustratingly, the enhanced ion transport often compromises the charge mobility of the original CP. In this work, we present an additive-mediated method to construct a modified poly(3-hexylthiophene) (P3HT) film to enable efficient ion migration. The additive is designed with a cleavable diazo group that releases nitrogen and 2-methoxyethanol, a volatile compound, to alter the P3HT film morphology. OECTs based on the film exhibit improved response times. Interestingly, the process also enhances the crystallinity of P3HT, leading to higher hole mobility compared with pristine P3HT. This study proposes an in situ strategy to achieve the functionality of the OMIEC via morphological regulation, offering a promising route to simultaneously enhance both ion accessibility and charge mobility.

Organic polymers↗

Geochemical Evidence for Rare-Earth Element Mobilization during Kaolin Diagenesis

This study investigates how saprolization influences inherent rare-earth element (REE) source rock signatures and how depositional environment(s) and diagenetic reactions ultimately impact the REE signature within sedimentary kaolin bodies. Rare-earth element geochemistry signatures are particularly useful for tracking element sources and mobility and are, therefore, powerful tools in the investigation of clay mineral formation and diagenesis. Rare-earth element and bulk chemical compositions were determined using discrete chemical analyses and chemical imaging. Saprolitic materials show an enrichment in the light and heavy REEs, compared with the parent material, with enhanced Ce/Eu anomalies. Light REEs within sedimentary kaolins are associated with phosphate mineralogy and have experienced variable degrees of diagenetic fractionation and mobilization. Cretaceous kaolins display more light REE mobility compared with Tertiary kaolins, which show very little REE fractionation. Degrees of REE fractionation are driven primarily by differences in sedimentary kaolin physical properties and the presence of organic acids in groundwater. Unfortunately, the provenance of the Georgia kaolins could not be determined based solely on the trace-element and REE compositions because fractionations during saprolization and diagenesis mask much of the inherent provenance signatures. Lastly, implications for the REEs as an economic deposit and their beneficiation are discussed.

58 GEOSCIENCES↗

Grain-Size-Limited Mobility in Methylammonium Lead Iodide Perovskite Thin Films

We report a systematic study of the gigahertz-frequency charge carrier mobility found in methylammonium lead iodide perovskite films as a function of average grain size using time-resolved microwave conductivity and a single processing chemistry. Our measurements are in good agreement with the Kubo formula for the AC mobility of charges confined within finite grains, suggesting (1) that the surface grains imaged via scanning electron microscopy are representative of the true electronic domain size and not substantially subdivided by twinning or other defects not visible by microscopy and (2) that the time scale of diffusive transport across grain boundaries is much slower than the period of the microwave field in this measurement (-100 ps). The intrinsic (infinite grain size) minimum mobility extracted form the model is 29 +/- 6 cm2 V-1 s-1 at the probe frequency (8.9 GHz).

36 MATERIALS SCIENCE↗

Nanoscale Particle Motion Reveals Polymer Mobility Gradient in Nanocomposites

Polymer mobility near nanoparticle surfaces has been extensively discussed; however, direct experimental observation in the nanocomposite melts has been a difficult task. Here, by taking advantage of large dynamical asymmetry between the miscible matrix and surface-bound polymers, we highlighted their interphases and studied the resulting effect on the nanoparticle relaxation using X-ray photon correlation spectroscopy. Here, the local mobility gradient is signified by an unprecedented increase in the relaxation time at length scales on the order of polymer radius of gyration. The effect is accompanied by a transition from simple diffusive to subdiffusive behavior in accord with viscous and entangled dynamics of polymers in the matrix and in the interphase, respectively. Our results demonstrate that the nanoparticle-induced polymer mobility changes in the interphases of nanocomposite melts can be extracted from the length-scale-dependent slow particle motion.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Hybrid Heterostructures to Generate Long-Lived and Mobile Photocarriers in Graphene

We report the generation of long-lived and highly mobile photocarriers in hybrid van der Waals heterostructures that are formed by monolayer graphene, few-layer transition metal dichalcogenides, and the organic semiconductor F 8 ZnPc. Samples are fabricated by dry transfer of mechanically exfoliated MoS 2 or WS 2 few-layer flakes on a graphene film, followed by deposition of F 8 ZnPc. Transient absorption microscopy measurements are performed to study the photocarrier dynamics. In heterostructures of F 8 ZnPc/few-layer-MoS 2 /graphene, electrons excited in F 8 ZnPc can transfer to graphene and thus be separated from the holes that reside in F 8 ZnPc. By increasing the thickness of MoS 2 , these electrons acquire long recombination lifetimes of over 100 ps and a high mobility of 2800 cm 2 V–1 s –1 . Graphene doping with mobile holes is also demonstrated with WS 2 as the middle layers. Furthermore, these artificial heterostructures can improve the performance of graphene-based optoelectronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Characterization of Americium and Curium Complexes with the Protein Lanmodulin: A Potential Macromolecular Mechanism for Actinide Mobility in the Environment

Anthropogenic radionuclides, including long-lived heavy actinides such as americium and curium, represent the primary long-term challenge for management of nuclear waste. The potential release of these wastes into the environment necessitates understanding their interactions with biogeochemical compounds present in nature. Here, we characterize the interactions between the heavy actinides, Am 3+ and Cm 3+ , and the natural lanthanide-binding protein, lanmodulin (LanM). LanM is produced abundantly by methylotrophic bacteria, including Methylorubrum extorquens, that are widespread in the environment. We determine the first stability constant for an Am 3+ -protein complex (Am 3 LanM) and confirm the results with Cm 3 LanM, indicating a ~5-fold higher affinity than that for lanthanides with most similar ionic radius, Nd 3+ and Sm 3+ , and making LanM the strongest known heavy actinide-binding protein. The protein’s high selectivity over 243 Am’s daughter nuclide 239 Np enables lab-scale actinide-actinide separations as well as provides insight into potential protein-driven mobilization for these actinides in the environment. The luminescence properties of the Cm 3+ -LanM complex, and NMR studies of Gd 3+ -LanM, reveal that lanmodulin-bound f-elements possess two coordinated solvent molecules across a range of metal ionic radii. Finally, we show under a wide range of environmentally relevant conditions that lanmodulin effectively outcompetes desferrioxamine B, a hydroxamate siderophore previously proposed to be important in trivalent actinide mobility. Overall, these results suggest that natural lanthanide-binding proteins such as lanmodulin may play important roles in speciation and mobility of actinides in the environment; it also suggests that protein-based biotechnologies may provide a new frontier in actinide remediation, detection, and separations.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Effective Ion Mobility Calculations for Macromolecules by Scattering off Electron Clouds

Broad commercialization and increasing resolving power of ion mobility spectrometry/mass spectrometry (IMS/MS) platforms has engendered an explosion of IMS applications to structural characterization of gas-phase biomolecules. That has renewed interest in more accurate and rapid ion mobility calculations needed to elicit ion geometries from the measurements. An approach based on scattering off electron density isosurfaces (SEDI) that mirrors the physics of molecular collisions was proven superior to the common methods involving atomic coordinates a decade ago, but has remained impractical for large ions because of extreme computational demands. Here, we accelerate SEDI by up to ~500 times using the fragment molecular orbital (FMO) approach for surface generation and the multiplexed scattering algorithm in conjunction with the new grid extrapolation procedure for cross section evaluations. Parallelization of the code on a supercomputer has produced major further speed gains, allowing SEDI calculations for proteins (defined by over a million surface points) with the precision of <0.1% in one minute. Initial tests reveal the anticipated dependences of mobility on the ion charge state and lower cross sections in view of reduced surface roughness. Present developments are expected to lead to broad application of SEDI in IMS studies of macromolecules, enabling more accurate and reliable structural assignments.

Alexeev, Yuri↗

High magnesium mobility in ternary spinel chalcogenides

Magnesium batteries appear a viable alternative to overcome the safety and energy density limitations faced by current lithium-ion technology. Furthermore, the development of a competitive magnesium battery is plagued by the existing notion of poor magnesium mobility in solids. We demonstrate by using ab initio calculations, nuclear magnetic resonance, and impedance spectroscopy measurements that substantial magnesium ion mobility can indeed be achieved in close-packed frameworks (~ 0.01-0.1 mS cm -1 at 298 K), specifically in the magnesium scandium selenide spinel. Our theoretical predictions also indicate that high magnesium ion mobility is possible in other chalcogenide spinels, opening the door for the realization of other magnesium solid ionic conductors and the eventual development of an all-solid-state magnesium battery.

25 ENERGY STORAGE↗

A Deep Gravity model for mobility flows generation

The movements of individuals within and among cities influence critical aspects of our society, such as well-being, the spreading of epidemics, and the quality of the environment. When information about mobility flows is not available for a particular region of interest, we must rely on mathematical models to generate them. In this work, we propose Deep Gravity, an effective model to generate flow probabilities that exploits many features (e.g., land use, road network, transport, food, health facilities) extracted from voluntary geographic data, and uses deep neural networks to discover non-linear relationships between those features and mobility flows. Our experiments, conducted on mobility flows in England, Italy, and New York State, show that Deep Gravity achieves a significant increase in performance, especially in densely populated regions of interest, with respect to the classic gravity model and models that do not use deep neural networks or geographic data. Deep Gravity has good generalization capability, generating realistic flows also for geographic areas for which there is no data availability for training. Finally, we show how flows generated by Deep Gravity may be explained in terms of the geographic features and highlight crucial differences among the three considered countries interpreting the model’s prediction with explainable AI techniques.

97 MATHEMATICS AND COMPUTING↗

High-throughput screening of 2D materials identifies p-type monolayer WS2 as potential ultra-high mobility semiconductor

Abstract 2D semiconductors offer a promising pathway to replace silicon in next-generation electronics. Among their many advantages, 2D materials possess atomically-sharp surfaces and enable scaling the channel thickness down to the monolayer limit. However, these materials exhibit comparatively lower charge carrier mobility and higher contact resistance than 3D semiconductors, making it challenging to realize high-performance devices at scale. In this work, we search for high-mobility 2D materials by combining a high-throughput screening strategy with state-of-the-art calculations based on the ab initio Boltzmann transport equation. Our analysis singles out a known transition metal dichalcogenide, monolayer WS 2 , as the most promising 2D semiconductor, with the potential to reach ultra-high room-temperature hole mobilities in excess of 1300 cm 2 /Vs should Ohmic contacts and low defect densities be achieved. Our work also highlights the importance of performing full-blown ab initio transport calculations to achieve predictive accuracy, including spin–orbital couplings, quasiparticle corrections, dipole and quadrupole long-range electron–phonon interactions, as well as scattering by point defects and extended defects.

Chemistry↗

Mobile genetic elements shape microbial diversity and functions in thawing permafrost soils

Ecosystems are shaped by communities of microorganisms whose niches and impacts depend on functional profiles influenced by gene gains and losses. Culture-based experiments demonstrate that mobile genetic elements (MGEs) can mediate gene flux, but quantitative understanding of these dynamics in natural systems remains limited. Here we develop and apply a systematic, meta-omic framework to investigate MGEs in a complex natural system using an 8-year soil time series collected at Stordalen Mire, in Sweden’s thawing permafrost margin. In this climate-critical peatland, we identify ~2.1 million MGE recombinases across 89 microbial phyla and assess ecological distributions, affected functions, past mobility and current activity. This revealed an active mobilome that shapes natural genetic diversity via differential impacts on major phyla and affects a wide range of functions, including metabolic genes involved in carbon flux and nutrient cycling. These findings and this analytic framework suggest avenues towards a better understanding of MGE diversity, activity, mobility and impacts across ecosystems.

Biological and medical sciences↗

Mechanical flip-chip for ultra-high electron mobility devices

In this study, electrostatic gates are of paramount importance for the physics of devices based on high-mobility two-dimensional electron gas (2DEG) since they allow depletion of electrons in selected areas. This field-effect gating enables the fabrication of a wide range of devices such as, for example, quantum point contacts (QPC), electron interferometers and quantum dots. To fabricate these gates, processing is usually performed on the 2DEG material, which is in many cases detrimental to its electron mobility. Here we propose an alternative process which does not require any processing of the 2DEG material other than for the ohmic contacts. This approach relies on processing a separate wafer that is then mechanically mounted on the 2DEG material in a flip-chip fashion. This technique proved successful to fabricate quantum point contacts on both GaAs/AlGaAs materials with both moderate and ultra-high electron mobility.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhanced thermoelectric performance in Cu-intercalated BiTeI by compensation weakening induced mobility improvement

The low weighted carrier mobility has long been considered to be the key challenge for improvement of thermoelectric (TE) performance in BiTeI. The Rashba-effect-induced two-dimensional density of states in this bulk semiconductor is beneficial for thermopower enhancement, which makes it a prospective compound for TE applications. In this report, we show that intercalation of minor Cu-dopants can substantially alter the equilibria of defect reactions, selectively mediate the donor-acceptor compensation, and tune the defect concentration in the carrier conductive network. Consequently, the potential fluctuations responsible for electron scattering are reduced and the carrier mobility in BiTeI can be enhanced by a factor of two to three between 10 K and 300 K. The carrier concentration can also be optimized by tuning the Te/I composition ratio, leading to higher thermopower in this Rashba system. Cu-intercalation in BiTeI gives rise to higher power factor, slightly lower lattice thermal conductivity, and consequently improved figure of merit. Compared with pristine BiTe 0.98 I 1.02 , the TE performance in Cu 0.05 BiTeI reveals a 150% and 20% enhancement at 300 and 520 K, respectively. Ultimately, these results demonstrate that defect equilibria mediated by selective doping in complex TE and energy materials could be an effective approach to carrier mobility and performance optimization.

36 MATERIALS SCIENCE↗

High-mobility capacitively-induced two-dimensional electrons in a lateral superlattice potential

In the presence of a lateral periodic potential modulation, two-dimensional electrons may exhibit interesting phenomena, such as a graphene-like energy-momentum dispersion, Bloch oscillations, or the Hofstadter butterfly band structure. To create a sufficiently strong potential modulation using conventional semiconductor heterostructures, aggressive device processing is often required, unfortunately resulting in strong disorder that masks the sought-after effects. Here, we report a novel fabrication process flow for imposing a strong lateral potential modulation onto a capacitively induced two-dimensional electron system, while preserving the host material quality. Using this process flow, the electron density in a patterned Si/SiGe heterostructure can be tuned over a wide range, from 4.4 × 10 10 cm –2 to 1.8 × 10 11 cm –2 , with a peak mobility of 6.4 × 10 5 cm 2 /V·s. The wide density tunability and high electron mobility allow us to observe sequential emergence of commensurability oscillations as the density, the mobility, and in turn the mean free path, increase. Magnetic-field-periodic quantum oscillations associated with various closed orbits also emerge sequentially with increasing density. We show that, from the density dependence of the quantum oscillations, one can directly extract the steepness of the imposed superlattice potential. Lastly, this result is then compared to a conventional lateral superlattice model potential.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the mobility of carriers at semi-coherent oxide heterointerfaces

In the quest to develop new materials with enhanced ionic conductivity for battery and fuel cell applications, nano-structured oxides have attracted attention. Experimental reports indicate that oxide heterointerfaces can lead to enhanced ionic conductivity, but these same reports cannot elucidate the origin of this enhancement, often vaguely referring to pipe diffusion at misfit dislocations as a potential explanation. However, this highlights the need to understand the role of misfit dislocation structure at semi-coherent oxide heterointerfaces in modifying carrier mobilities. Here, we use atomistic and kinetic Monte Carlo (KMC) simulations to develop a model of oxygen vacancy migration at SrTiO 3 /MgO interfaces, chosen because the misfit dislocation structure can be modified by changing the termination chemistry. We use atomistic simulations to determine the energetics of oxygen vacancies at both SrO and TiO 2 terminated interfaces, which are then used as the basis of the KMC simulations. While this model is approximate (as revealed by select nudged elastic band calculations), it highlights the role of the misfit dislocation structure in modifying the oxygen vacancy dynamics. We find that oxygen vacancy mobility is significantly reduced at either interface, with slight differences at each interface due to the differing misfit dislocation structure. Here, we conclude that if such semi-coherent oxide heterointerfaces induce enhanced ionic conductivity, it is not a consequence of higher carrier mobility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗