Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MICROSPHERES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Safety and Efficacy of Transarterial Radioembolization Combined with Chemoembolization for Bilobar Hepatocellular Carcinoma: A Single-Center Retrospective Study

BackgroundRadioembolization induced liver disease (REILD) is a possible sequela of transarterial radioembolization (TARE), particularly in cases of whole-liver treatment. To mitigate this problem, the safety and efficacy of combined transarterial chemoembolization (TACE) and TARE were evaluated for patients with bilobar hepatocellular carcinoma (HCC).Materials and MethodsNineteen patients (mean age 60 years; range 27–82 years) treated for HCC between June 2012 and September 2014 were included in the analysis. Each patient was treated with combined TARE and TACE for bilobar HCC, with or without portal vein thrombosis. The hepatic lobe with large HCC was treated with TARE, and the other lobe with small HCC(s) was treated with TACE. Laboratory and clinical data were investigated to determine REILD occurrence. Survival data were analyzed to compare the treatment efficacy of alternative treatment modalities, including TACE and sequential TARE.ResultsAll patients underwent TARE for a dominant tumor in one lobe and TACE for small nodule(s) in the other lobe of the liver. The mean yttrium-90 microspheres used in TARE were 2.8 GBq (range; 1.0-3.5 GBq), and the mean doses of doxorubicin and iodized oil were 24.5 mg and 5.2 mL, respectively, for TACE. No statistical differences were noted between laboratory data measured before and after treatment, and no procedure-related major clinical complications occurred. The median time-to-progression of patients was 10.0 months, and the median overall survival was 27.3 months.ConclusionCombined radioembolization and chemoembolization appears to be a safe and effective treatment modality for bilobar HCC.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Angiographic Anatomy and Relevance of 3 and 9 O’clock Arteries During Radioembolization

Purpose3 and 9 o’clock arteries (3&9As) which supply the common hepatic duct connect hepatic with duodenal/pancreatic territories. The study purpose is to describe the angiographic anatomy of 3&9As and discuss their relevance when performing radioembolization (RE) of liver malignancies.Materials and MethodsThe anatomy of the 3&9As was systematically investigated by a retrospective analysis of angiograms, technetium Tc-99 m-macroaggregated albumin (MAA) scintigrams, yttrium-90 (Y90) Bremsstrahlung-SPECT/CT datasets, and clinical data of 153 patients who underwent RE between 2010 and 2013.ResultsAnalysis of preprocedural angiograms identified 3&9As in 36 (24%) of the 153 patients. Following embolization of the gastroduodenal artery, 3&9As were seen in 53 cases (35%). The three most common origins of the 3&9As were the right hepatic artery (n = 14), the cystic artery (n = 11), and S5 and S6 segmental arteries (n = 5 each). Extrahepatic Tc-99 m-MAA deposition in the territory of the 3&9As was significantly more frequent when 3&9As were detectable on preprocedural angiograms (28%{sub visible} vs. 11%{sub not} {sub visible}; p = 0.001) and especially when the 3&9As were not embolized or bridged prior to RE (50%{sub not} {sub occluded/bridged} vs. 19%{sub occupied/bridged}; p = 0.043). The presence of extrahepatic Y90 Bremsstrahlung after RE (n = 17) was attributable to microsphere diversion via the 3&9A territory in four patients and possible diversion via this territory in nine patients. Five of these 13 patients presented with epigastric pain, nausea, or vomiting (CTCAE severity grade ≤ 3) (p = 0.014).Conclusion3&9As are commonly detectable during evaluation angiography prior to RE, have a variable angioanatomic origin, and should be prophylactically occluded to prevent complications.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Hepatotoxic Dose Thresholds by Positron-Emission Tomography After Yttrium-90 Radioembolization of Liver Tumors: A Prospective Single-Arm Observational Study

PurposeTo define a threshold radiation dose to non-tumoral liver from {sup 90}Y radioembolization that results in hepatic toxicity using pair-production PET.Materials and MethodsThis prospective single-arm study enrolled 35 patients undergoing radioembolization. A total of 34 patients (27 with HCC and 7 with liver metastases) were included in the final analysis. Of 27 patients with underlying cirrhosis, 22 and 5 patients were Child–Pugh A and B, respectively. Glass and resin microspheres were used in 32 (94%) and 2 (6%) patients, respectively. Lobar and segmental treatment was done in 26 (76%) and 8 (24%) patients, respectively. Volumetric analysis was performed on post-radioembolization time-of-flight PET imaging to determine non-tumoral parenchymal dose. Hepatic toxicity was evaluated up to 120 days post-treatment, with CTCAE grade ≤ 1 compared to grade ≥ 2.ResultsThe median dose delivered to the non-tumoral liver in the treated lobe was 49 Gy (range 0–133). A total of 15 patients had grade ≤ 1 hepatic toxicity, and 19 patients had grade ≥ 2 toxicity. Patients with a grade ≥ 2 change in composite toxicity (70.7 vs. 43.8 Gy), bilirubin (74.1 vs. 43.3 Gy), albumin (84.2 vs. 43.8 Gy), and AST (94.5 vs. 47.1 Gy) have significantly higher non-tumoral parenchymal doses than those with grade ≤ 1. Liver parenchymal dose and Child–Pugh status predicted grade ≥ 2 toxicity, observed above a dose threshold of 54 Gy.ConclusionIncreasing delivered {sup 90}Y dose to non-tumoral liver measured by internal pair-production PET correlates with post-treatment hepatic toxicity. The likelihood of toxicity exceeds 50% at a dose threshold of 54 Gy.ClinicalTrials.gov identifier: NCT02848638.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Comparison of Cone-Beam Tomography and Cross-Sectional Imaging for Volumetric and Dosimetric Calculations in Resin Yttrium-90 Radioembolization

PurposeTo compare the use of cone-beam computed tomography versus contrast-enhanced computed tomography (CT) and magnetic resonance imaging (MRI) in the calculation of liver volume and planned dose for yttrium-90 radioembolization.Materials and MethodsThe study retrospectively assessed 47 consecutive patients who underwent resin Y-90 radioembolization consecutively over a 2-year period at a single center. Volume calculation software was used to determine perfused lobar liver volumes from cone-beam CT (CBCT) images obtained during mapping angiography. CBCT-derived volumes were compared with perfused lobar volume derived from contrast-enhanced CT and MRI. Nominal activities as determined by the SIR-Spheres Microspheres Activity Calculator were similarly calculated and compared using both CBCT and conventionally acquired volumes.ResultsA total of 82 hepatic lobes were assessed in 47 patients. The mean percentage difference between combined CT-MRI- and CBCT-derived calculated lobar volumes was 25.3% (p = 0.994). The mean percentage difference in calculated dose between the two methods was 21.8 ± 24.6% (p = 0.42). Combined left and right lobar CT-derived dose difference was less than 10% in 22 lobes, between 10 and 25% in 20 lobes, between 25 and 50% in 13 lobes and greater than 50% in 5 lobes. Combined left and right lobar MRI-derived dose difference was less than 10% in 11 lobes, between 10 and 25% in 7 lobes, between 25 and 50% in 2 lobes and greater than 50% in 1 lobe.ConclusionsAlthough volume measurements derived from CT/MRI did not differ significantly from those derived from CBCT, variability between the two methods led to large and unexpected differences in calculated dose.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Microstructure effects on high velocity microparticle impacts of copper

Constitutive models can fail to predict high-rate deformation behavior due to their inability to account for microstructural effects. In part, this is because of a dearth of experimental benchmarking data in the high strain-rate, low pressure regime, since many high-rate experiments also probe a region of strong shockwaves, at which point microstructure effects no longer play a primary role. This work uses laser-induced particle impact testing to quantitatively study high velocity impacts of small, rigid alumina microspheres on flat copper substrates with varying amounts of initial cold work in the weak shock regime, but at very high strain rates up to ~10 7 s –1 . Through paired experiments and numerical simulations, this work shows that the initial microstructure condition can have significant influence on dynamical mechanical properties in this range. Specifically, prior work hardening of the copper substrate leads to increased rebounding of the microparticles (i.e., less plastic dissipation in the impact) as well as smaller craters. Each of these experimental measurables can be converted into a strength measure, i.e., the dynamic yield strength or dynamic hardness, respectively, neither of which is well predicted consistently by existing constitutive laws. The general trend of hardening can be captured by such models by incorporating an existing “pre-strain,” suggesting that future calibration of the materials parameters may yield a good fit over a broader range of conditions. Our results emphasize the importance of reporting the microstructural condition in dynamic studies, as well as the necessity of accounting for these factors when formulating and optimizing constitutive models.

36 MATERIALS SCIENCE↗

Modeling of melting and erosion in high velocity microparticle impacts

High velocity collisions can cause melting, a situation involving elasticity, plasticity, and phase transformations in tandem, which is very challenging for mechanical modeling. Here, this paper advances the use of smoothed particle hydrodynamics (SPH) simulations for this complex situation, investigating stainless steel microspheres impacting a tin substrate. After extensive validation against a range of mechanical and geometrical measurements of experimental impacts, the model provides a detailed, quantitative view of melt volume production over a broad range of impact velocities. It also enables direct decomposition of the impact energy partitioning, including analysis of the energy absorbed by plasticity in the impactor, the system kinetic energy, and the adiabatic heating of the substrate in addition to the melting itself. Since these quantities are not available experimentally, SPH modeling substantially enhances the quantitative understanding of such impacts. Finally, the model speaks to the phase characteristics of the ejecta formed during impact, confirming the experimental inference that the ejected material likely contains a significant fraction of solid material.

Constitutive modeling↗

Photochemical micromotor of eccentric core in isotropic hollow shell exhibiting multimodal motion behavior

Adaptive motion behavior in response to different environmental stimuli is ubiquitous in biology and enables creatures to achieve a diversity of complex tasks, but not typically observed in synthetic systems. In this report we propose a design of chemically-powered micromotors actively performing multimodal motion behaviors with the external stimulus changing. They have isotropic outer surfaces but inherent inner mass asymmetry, such as eccentric core-in-hollow shell TiO 2 (E-TiO 2 ) microspheres. Their motion behavior can be spontaneously transformed among random Brownian propulsion (stochastic walk), negative phototaxis (moving against incident light), and negative photogravitaxis (moving against gravity) when the light intensity, illumination direction, or fuel concentration change. At a low light intensity and/or low H 2 O 2 fuel concentration, the E-TiO 2 micromotors perform directional movement away from light based on the dominated diffusiophoresis by the photocatalytic reaction over the isotropic shell. With the increase of light intensity or fuel concentration, there are more and more photons or fuels to reach the eccentric core and the contribution of the photocatalytic reaction over it to the diffusiophoresis gradually becomes dominant. In this case, the E-TiO 2 micromotors perform stochastic walks near the substrate due to their Brownian random rotational reorientations. The micromotors are single component, have low density, and can be synthesized in a large scale and at a low cost. This work will facilitate the development of multifunctional micro/nanomotors with varying behaviors and functions depending on environmental cues, e.g., enabling efficient search and delivery operations.

36 MATERIALS SCIENCE↗

Radiation Segmentectomy: A Novel Approach to Increase Safety and Efficacy of Radioembolization

Purpose: To describe a technique of segmental radioembolization for the treatment of patients with unresectable hepatocellular carcinoma (HCC). Radiation segmentectomy was defined as radioembolization of two or fewer hepatic segments. We sought to (1) calculate dose when activity is delivered segmentally assuming uniform and nonuniform distribution and, (2) determine safety and efficacy of this novel technique. Methods and Materials: A total of 84 patients with HCC who were treated with {sup 90}Y radioembolization using a segmental approach were included in this analysis. The dose delivered to the segment was calculated assuming uniform and nonuniform microsphere distribution within the treatment volume. To calculate dose assuming nonuniform distribution, a tumor hypervascularity ratio was assigned. Posttreatment response (using size and necrosis guidelines), toxicity, time to progression, and survival were determined. Results: The median treatment volume was 110 cm{sup 3}. The median radiation-naive liver volume was 1403 cm{sup 3}. The median dose delivered to the segment(s) assuming uniform distribution was 521 Gy. Taking into account tumor hypervascularity (nonuniform distribution), the median dose delivered to the tumor and normal infused hepatic volume was 1214 Gy and 210 Gy, respectively. Response by size and necrosis guidelines was seen in 59% and 81% of patients. Grade 3/4 biochemical toxicities were observed in 8 patients (9%). Median time to progression was 13.6 months (95% confidence interval, 9.3-18.7 months); median survival was 26.9 months (95% confidence interval, 20.5-30.2 months). Conclusions: Radiation segmentectomy is a safe and efficacious method of selectively delivering high dose to the tumor with minimal exposure of normal parenchyma.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Current Status of Radiopharmaceutical Therapy

In radiopharmaceutical therapy (RPT), a radionuclide is systemically or locally delivered with the goal of targeting and delivering radiation to cancer cells while minimizing radiation exposure to untargeted cells. Examples of current RPTs include thyroid ablation with the administration of {sup 131}I, treatment of liver cancer with {sup 90}Y microspheres, the treatment of bony metastases with {sup 223}Ra, and the treatment of neuroendocrine tumors with {sup 177}Lu-DOTATATE. New RPTs are being developed where radionuclides are incorporated into systemic targeted therapies. To assure that RPT is appropriately implemented, advances in targeting need to be matched with advances in quantitative imaging and dosimetry methods. Currently, radiopharmaceutical therapy is administered by intravenous or locoregional injection, and the treatment planning has typically been implemented like chemotherapy, where the activity administered is either fixed or based on a patient’s body weight or body surface area. RPT pharmacokinetics are measurable by quantitative imaging and are known to vary across patients, both in tumors and normal tissues. Therefore, fixed or weight-based activity prescriptions are not currently optimized to deliver a cytotoxic dose to targets while remaining within the tolerance dose of organs at risk. Methods that provide dose estimates to individual patients rather than to reference geometries are needed to assess and adjust the injected RPT dose. Accurate doses to targets and organs at risk will benefit the individual patients and decrease uncertainties in clinical trials. Imaging can be used to measure activity distribution in vivo, and this information can be used to determine patient-specific treatment plans where the dose to the targets and organs at risk can be calculated. The development and adoption of imaging-based dosimetry methods is particularly beneficial in early clinical trials. In this work we discuss dosimetric accuracy needs in modern radiation oncology, uncertainties in the dosimetry in RPT, and best approaches for imaging and dosimetry of internal radionuclide therapy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

An advanced low-cost cathode composed of graphene-coated Na 2.4 Fe 1.8 (SO 4 ) 3 nanograins in a 3D graphene network for ultra-stable sodium storage

Iron-based electrodes have attracted great attention for sodium storage because of the distinct cost effectiveness. However, exploring suitable iron-based electrodes with high power density and long duration remains a big challenge. Herein, a spray-drying strategy is adopted to construct graphene-coated Na 2.4 Fe 1.8 (SO 4 ) 3 nanograins in a 3D graphene microsphere network. The unique structural and compositional advantages endow these electrodes to exhibit outstanding electrochemical properties with remarkable rate performance and long cycle life. Additionally, mechanism analyses further explain the outstanding electrochemical properties from the structural aspect.

25 ENERGY STORAGE↗

Production of 28 μm zirconium carbide kernels using the internal gelation process and microfluidics

Studies using internal gelation and microfluidics have shown that the production of sintered spheres with diameters below 200 mm is possible. The addition of carbon can be problematic because of slow flow rates (100 mL/min) and long run times (4 h). However, we report a solution of dispersed carbon, Cabot’s TPX-101, was successfully used with solutions of zirconyl nitrate, urea, and hexamethylenetetramine to make zirconium microspheres with carbon. A simple carbothermic reduction using a maximum temperature of 2073 K and ultrahigh purity argon produced zirconium carbide kernels with an average diameter of 28 mm and a standard deviation of 2.3 mm.

36 MATERIALS SCIENCE↗

Comparison of unirradiated and irradiated AGR-2 TRISO fuel particle oxidation response

The silicon carbide (SiC) coating in a tristructural isotropic (TRISO) particle acts as a barrier to fission product release during reactor operation and accident scenarios. Oxidation and subsequent failure of the SiC layer during a rare air ingress event is a proposed mechanism for fission product release in a high-temperature gas-cooled reactor (HTGR). Although previous oxidation studies have analyzed unirradiated TRISO particle response, this study compared the oxidation behavior of irradiated and unirradiated TRISO particles from the second Advanced Gas Reactor Fuel Development and Qualification Program irradiation experiment (AGR-2). Particles with exposed SiC were subjected to six varying oxidizing tests in the Furnace for Irradiated TRISO Testing (FITT), examined for failure fraction with the Irradiated Microsphere Gamma Analyzer (IMGA) and characterized with focused ion beam and scanning/transmission electron microscopy techniques to analyze the oxide layer. Uncorrelated unirradiated particle failures throughout the series of exposures suggests that external factors inherent to the experiment increased particle failure sensitivity. However, irradiated particle observations indicated an increased failure response at 400 h 1400 °C in both 2% and 21% O 2 atmospheres above failure associated with external factors. Oxide thickness measurements after 400 h at 1400 °C revealed a greater oxidation rate than predicted by parabolic growth, which was attributed to the increased complexity of the oxide structure at longer exposure times. Altering the atmosphere from 21% to 2% O 2 reduced the average oxide thickness by approximately 12%–14% in both irradiated and unirradiated particles at 400 h 1400 °C. Altogether, the minor variations observed between irradiated and unirradiated particles in this study led to the conclusion that unirradiated TRISO particles can be used to approximate irradiated TRISO oxidation kinetics.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

TiO{sub 2} synthesized by microwave assisted solvothermal method: Experimental and theoretical evaluation

In this study, a microwave assisted solvothermal method was used to synthesize TiO{sub 2} with anatase structure. The synthesis was done using Ti (IV) isopropoxide and ethanol without templates or alkalinizing agents. Changes in structural features were observed with increasing time of synthesis and evaluated using periodic quantum chemical calculations. The anatase phase was obtained after only 1 min of reaction besides a small amount of brookite phase. Experimental Raman spectra are in accordance with the theoretical one. Micrometric spheres constituted by nanometric particles were obtained for synthesis from 1 to 30 min, while spheres and sticks were observed after 60 min. - Graphical abstract: FE-SEM images of anatase obtained with different periods of synthesis associated with the order–disorder degree. Display Omitted - Highlights: • Anatase microspheres were obtained by the microwave assisted hydrothermal method. • Only ethanol and titanium isopropoxide were used as precursors during the synthesis. • Raman spectra and XRD patterns were compared with quantum chemical calculations. • Time of synthesis increased the short-range disorder in one direction and decreased in another.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CuO urchin-nanostructures synthesized from a domestic hydrothermal microwave method

This letter reports the synthesis of CuO urchin-nanostructures by a simple and novel hydrothermal microwave method. The formation and growth of urchin-nanostructures is mainly affected by the addition of polyethylene glycol (PEG). The hierarchical malachite particles are uniform spheres with a diameter of 0.7-1.9 {mu}m. CuO urchin-nanostructures were characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FEG-SEM) and nitrogen adsorption (BET). The specific surface area of the CuO nanostructured microspheres was about 170.5 m{sup 2}/g. A possible mechanism for the formation of such CuO urchin-nanostructures is proposed.

36 MATERIALS SCIENCE↗

Synthesis of magnetically separable Sn doped magnetite/silica core-shell structure and photocatalytic property

Sn doped Fe{sub 3}O{sub 4}/SiO{sub 2} core-shell structures with the magnetic and photocatalytic properties have been successfully synthesized using Fe{sub 3}O{sub 4} microspheres as the precursor. The morphology, phase and structure of the bifunctional products were investigated by X-ray powder diffraction, transmission electron microscopy, selected-area electron diffraction, high-resolution transmission electron microscopy, energy dispersive spectroscopy, and scanning electron microscopy. The effects of the amount and hydrolysis rate of tetraethyl orthosilicate on the preparation of the Fe{sub 3}O{sub 4}/SiO{sub 2} core-shell structures were investigated. Low concentration and slow hydrolysis rate of tetraethyl orthosilicate were useful to obtain the uniform silica coated Fe{sub 3}O{sub 4}. The magnetic measurements indicated that the Sn doped Fe{sub 3}O{sub 4}/SiO{sub 2} core-shell structures showed ferromagnetic property and the magnetic saturation value slightly decreased after coated the silica layer. The magnetic Sn doped Fe{sub 3}O{sub 4}/SiO{sub 2} core-shell structures exhibited good photocatalytic activity in the degradation of methyl orange and could be separated by applying an appropriate magnetic field.

36 MATERIALS SCIENCE↗

Synthesis and photochromic properties of EDTA-induced MoO{sub 3} powder

Graphical abstract: The MoO{sub 3} powder, which exhibits highly dispersed floral aggregated-like structure built up by superimposed and staggered nanoflakes with a diameter of 1-1.5 {mu}m and a thickness of 0.1-0.2 {mu}m, has been successfully obtained when the molar ratio of EDTA/Mo{sup 6+} is 0.05:1. The EDTA inducer obviously enlarges the surface area and apparently enhances the reactivity of MoO{sub 3} powders, making it show greater absorptive capacity to the excitation light and better photochromic properties than the pure MoO{sub 3} powder. Highlights: {yields} EDTA as organic inducing agent. {yields} EDTA inducer at EDTA/Mo{sup 6+} molar ratio of 0.05:1 enables growth of flower-like microspheres. {yields} The formation of flower-like MoO{sub 3} makes its photochromic properties strongly enhanced. -- Abstract: In this study, the photochromic MoO{sub 3} powder with novel morphology has been synthesized via hydrothermal method, using ethylene diamine tetraacetice acid (EDTA) as organic inducing agent. The influence of EDTA on the morphology, structure and photochromic properties of MoO{sub 3} powder has been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), as well as ultraviolet and visible spectroscopy (UV-vis) and color difference meter. When the molar ratio of EDTA/Mo{sup 6+} is 0.05:1, the EDTA-induced MoO{sub 3} powder is found to have 3D flower-like morphologies and excellent photochromic properties. Furthermore, the possible growth mechanism of the flower-like structure and the photochromic mechanism of MoO{sub 3} powder are also discussed in detail.

36 MATERIALS SCIENCE↗

Synthesis and electrochemical performance of Li{sub 1+x}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} (0 {<=} x {<=} 0.15) cathode materials for lithium-ion batteries

Graphical abstract: Cycle behavior of Li{sub 1+x}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} cells (x = 0, 0.05, 0.10 and 0.15) obtained during cycling within the potential of 2.5-4.3 V. Highlights: Black-Right-Pointing-Pointer The spherical Li{sub 1+x}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} were synthesized by coprecipitation method. Black-Right-Pointing-Pointer Excess lithium improved the electrochemical performance. Black-Right-Pointing-Pointer Li{sub 1.10}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} showed the best electrochemical performance. Black-Right-Pointing-Pointer Li{sub 1.10}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} had the lowest charge transfer resistance. -- Abstract: In this work, layered lithium-excess materials Li{sub 1+x}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} (x = 0, 0.05, 0.10 and 0.15), of spherical morphology with primary nanoparticles assembled in secondary microspheres, were synthesized by a coprecipitation method. The effects of lithium content on the structure and electrochemical performance of these materials were evaluated by employing X-ray diffraction (XRD), inductive coupled plasma (ICP), scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS) and galvanostatic charge/discharge tests. It is found that Li{sub 1.10}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}}, i.e., Li[(Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}){sub 0.95}Li{sub 0.05}]O{sub 2} showed the best electrochemical performance due to the highly ordered layered structure, reduced cation mixing and the lowest charge transfer resistance. Li{sub 1.10}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} delivered a discharge capacity of 145 mA h g{sup -1} at 125 mA g{sup -1} in the cut-off voltage of 2.5-4.3 V, and had a capacity retention of 100% after 50 cycles at room temperature.

36 MATERIALS SCIENCE↗