Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Lattice Field Theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Thermal conductivity and theory of inelastic scattering of phonons by collective fluctuations

We study the intrinsic scattering of phonons by a general quantum degree of freedom, i.e., a fluctuating “field” Q, which may have completely general correlations, restricted only by unitarity and translational invariance. From the induced scattering rates, generalizing the model studied in a companion paper [Mangeolle et al., Phys. Rev. X 12, 041031 (2022)], we obtain the consequences on the thermal conductivity tensor of the phonons. We confirm that, even within our generalized model, the off-diagonal scattering rates involve a minimum of three- to four-point correlation functions of the Q fields, and we discuss the “semiclassical” versus “quantum” nature of all contributions. We obtain general and explicit forms for these correlations which isolate the contributions to the Hall conductivity, and we provide a general discussion of the implications of symmetry and equilibrium; this elaborates on, and extends, the results of Mangeolle et al. [Phys. Rev. X 12, 041031 (2022)]. We also extend the discussion and evaluation of these two- (diagonal scattering) and four-point correlation functions, and hence the thermal transport, for the illustrative example of an ordered two-dimensional antiferromagnet, where the Q field is a composite of magnon operators arising from spin-lattice coupling, and confirm numerically that the results, while satisfying all the necessary symmetry restrictions, lead to nonvanishing scattering and Hall effects. In particular, we investigate, both analytically and numerically, the dependence of such intrinsic scattering on a crucial parameter—the magnon to phonon velocity ratio v. We in particular confirm that within some range of v of order 1 the skew-scattering mechanism leads to comparable thermal Hall conductivity for thermal currents within and normal to the plane of the antiferromagnetism, and we discover that the temperature scaling of the longitudinal conductivity displays a threshold effect and a nonuniversal, continuous variation of the scaling exponent with v.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solid-State Hydroxide Ion Conductivity in Silver(I) Oxide, Ag 2 O

Silver (I) oxide, Ag 2 O, precipitated as microcrystals by combining aqueous silver(I) nitrate and KOH solutions, was found to be a solid-state hydroxide ion conductor with ionic conductivity on the order of 10 -3 S/cm. The proton chemical shifts at 4.87 and -7.35 ppm measured by solid-state 1H-NMR experiments are attributed to water molecules and in-lattice OH - coordinated to silver, respectively. The lack of spinning sidebands around the 4.87 ppm peak indicates rapid reorientation on the NMR timescale, suggesting that the water molecules are adsorbed to the surface of the Ag 2 O crystals. Pulsed field gradient measurements gave similar diffusion coefficients (2 x 10 -7 cm 2 /s at 298K) for all three proton environments indicating chemical exchange between sites on the millisecond timescale. The activation energy for OH - diffusion measured by NMR (0.18 eV) was comparable to that obtained by conductivity measurements and density functional theory (DFT) electronic structure calculations. Furthermore, the calculated Pourbaix diagram of Ag 2 O is consistent with the slightly lower sample density observed in He pycnometry and thermogravimetric measurements.

25 ENERGY STORAGE↗

Symmetry breaking forms split-off flat bands in quantum oxides controlling metal versus insulator phases

The crystal structure used as input to electronic structure calculation of conventionally bonded solids consists primarily of the standard crystallographic degrees of freedom. Quantum solids sometimes have additional microscopic degrees of freedom (m-DOF) nested within the crystallographic structure. These might include local motifs including positional (Peierls dimers, deformed octahedra, Jahn-Teller distortions), magnetic (local moment configurations) and dipolar (local ferroelectric configurations). Such motifs can be observed experimentally via local probes that avoid averaging, and theoretically as distinct total energy lowering features relative to more simplified “average crystallographic structures”. Here we examine the ability of electronic structure methods independent of strong correlation physics to explain the broad phenomenology of metal-insulator selectivity in quantum oxides by energy-lowering symmetry breaking. We do this by avoiding the restriction of considering only (i) electron-electron interactions in a fixed unresponsive lattice—as done in Mott strong correlation explanations—allowing, however, (ii) local positional and magnetic motifs that coexist within a crystallographic landscape. We find in a broad range of quantum oxides with different symmetry breaking modes the formation of split-off flat bands that can also control metallic versus insulating characteristics. The split-off band effect is common to magnetic and non-magnetic materials, including both binary and ternary oxides. One finds that when such local symmetry breaking motifs are considered in mean-field-like (e.g. density functional theory) electronic structure calculations of quantum oxides, they explain many of the observed trends in metal vs insulator phases discussed otherwise in prior literature via strong correlation in symmetry unbroken view.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Ga doping on magnetic properties, magnetocaloric effect, and electronic structure of pseudobinary GdZn 1 - x Ga x ( x = 0 - 0.1 )

Here, we explore the impact of introducing IIIA-group element Ga in place of IIB-group element Zn in binary intermetallic GdZn on its magnetic and magnetocaloric properties, as well as explicate the modified electronic band structure of the compound. The magnetic transition temperature of the compound decreases with the increase of Ga concentration in GdZn 1-x ⁢Ga x ⁢(x = 0–0.1) while the crystal structure (CsCl prototype) and lattice parameters remain unchanged. Our detailed analysis of magnetization and magnetocaloric data conclusively proves that long-ranged magnetic ordering exists in the sample, despite the magnetic interaction considerably weakening with the increase of Ga. The experimental data are rationalized using both a theoretical machine-learning model and first-principle density functional theory. The electronic band structure of GdZn is manifested with some unusual complex features which gradually diminish with Ga doping and the conventional sinusoidal feature of Ruderman-Kittel-Kasuya-Yosida-type interactions also disappears. A mean-field theory model is developed and can successfully describe the overall magnetocaloric behavior of the GdZn 1-x⁢ Ga x series of samples.

36 MATERIALS SCIENCE↗

Symmetry-projected spin-AGP methods applied to spin systems

Symmetry-projected wave function methods capture static correlation by breaking and restoring the symmetries of a system. In this article, we present the symmetry-projected spin antisymmetrized geminal power (spin-AGP) state projected onto space group symmetry as well as complex conjugation, spin-flip, and time-reversal symmetries. The method is benchmarked on the 1D XXZ model and the 2D J 1 − J 2 model with square and triangular lattices. Our results indicate that symmetry projection methods provide a powerful tool for frustrated spin systems.

Antisymmetrized geminal power↗

Quantum stabilization of unexpected ordered phases on the honeycomb lattice

In this work, I discuss and showcase the utility of the method called minimally-augmented spin-wave theory (MAGSWT) as a relatively simple semi-analytical approach to the phase diagrams of quantum magnets. It complements numerical methods by providing physical insight into which states are competitive and by yielding approximate phase boundaries that agree well with much more numerically intensive calculations. This approach enabled me to construct the faithful phase diagrams of two paradigmatic honeycomb-lattice models in the quantum S=1/2 limit, the J 1 –J 3 FM-AF and J 1 –J 2 AF models, for the collinear quantum phases that replace or extend the classical ones. The results are in good qualitative and semi-quantitative agreement with state-of-the-art numerical studies for these models, correctly capturing the emergence of unexpected quantum phases and the suppression of classically favored spiral orders by quantum fluctuations. This study provides a much-needed important guidance to the ongoing theoretical and experimental searches of the unconventional quantum states. This work will be of significant and timely interest to both theorists and experimentalists in the field of quantum magnetism, broadly defined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Gaussian approximation potentials for accurate thermal properties of two-dimensional materials

Two-dimensional materials (2DMs) continue to attract a lot of attention, particularly for their extreme flexibility and superior thermal properties. Molecular dynamics simulations are among the most powerful methods for computing these properties, but their reliability depends on the accuracy of interatomic interactions. While first principles approaches provide the most accurate description of interatomic forces, they are computationally expensive. In contrast, classical force fields are computationally efficient, but have limited accuracy in interatomic force description. Machine learning interatomic potentials, such as Gaussian Approximation Potentials, trained on density functional theory (DFT) calculations offer a compromise by providing both accurate estimation and computational efficiency. Here, in this work, we present a systematic procedure to develop Gaussian approximation potentials for selected 2DMs, graphene, buckled silicene, and h-XN (X = B, Al, and Ga, as binary compounds) structures. We validate our approach through calculations that require various levels of accuracy in interatomic interactions. The calculated phonon dispersion curves and lattice thermal conductivity, obtained through harmonic and anharmonic force constants (including fourth order) are in excellent agreement with DFT results. HIPHIVE calculations, in which the generated GAP potentials were used to compute higher-order force constants instead of DFT, demonstrated the first-principles level accuracy of the potentials for interatomic force description. Molecular dynamics simulations based on phonon density of states calculations, which agree closely with DFT-based calculations, also show the success of the generated potentials in high-temperature simulations.

2D Materials↗

Phenomenological theory of the magnetic 90° helical state

We explore a phenomenological phase diagram for the magnetic helical state with 90° turn angle between neighboring spins in the external magnetic field. Such a state is formed by the Eu spin layers in the superconducting iron arsenide RbEuFe 4 As 4 . The peculiarity of this spin configuration is that it is not realized in the standard Heisenberg model with bilinear exchange interactions. A minimum model allowing for such a state requires the biquadratic nearest-neighbor interaction term. In addition, in tetragonal materials, the 90° helix state may be stabilized by the in-plane fourfold anisotropy term, which also fixes helix orientation with respect to the crystal lattice. Such a system has a very rich behavior in the external magnetic field. The magnetic field induces the metamagnetic transition to the double-periodic state with the moment angles (α α -α,-α) with respect to the field for the four subsequent spins. The transition field to this state from the deformed helix is determined by the strength of biquadratic interaction. The transition is second-order for small biquadratic coupling and becomes first-order when this coupling exceeds the critical value. On the other hand, the aligned state at high magnetic field becomes unstable with respect to the formation of an incommensurate fan state, which transforms into the double-periodic state with decreasing magnetic field. The range of this incommensurate state near the saturation field is proportional to square of the biquadratic coupling. In addition, when the magnetic field is applied along one of four the equilibrium moment directions, the deformed helix state experience the first-order rotation transition at the field determined by the fourfold anisotropy.

36 MATERIALS SCIENCE↗

Minimal entanglement and emergent symmetries in low-energy QCD

Here, we study low-energy scattering of spin-$\frac{1}{2}$ baryons from the perspective of quantum information science, focusing on the correlation between entanglement minimization and the appearance of accidental symmetries. The baryon transforms as an octet under the SU⁡(3) flavor symmetry and its interactions below the pion threshold are described by contact operators in an effective field theory (EFT) of QCD. Despite there being 64 channels in the 2-to-2 scattering, only six independent operators in the EFT are predicted by SU⁡(3). We show that successive entanglement minimization in SU⁡(3)-symmetric channels are correlated with increasingly large emergent symmetries in the EFT. In particular, we identify scattering channels whose entanglement suppression are indicative of emergent SU⁡(6), SO⁡(8), SU⁡(8), and SU⁡(16) symmetries. We also observe the appearance of non-relativistic conformal invariance in channels with unnaturally large scattering lengths. Improved precision from lattice simulations could help determine the degree of entanglement suppression, and consequently the amount of accidental symmetry, in low-energy QCD.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Propeller-wing interaction using a frequency domain panel method

The unsteady aerodynamic coupling between a propeller and a wing is analyzed using linear compressible aerodynamic theory. The periodic loads are decomposed into harmonics, and the harmonic amplitudes are found iteratively. Each stage of the iteration involves the solution of an isolated propeller or wing problem; the interaction is done through the Fourier transform of the induced velocity field. The method was validated by comparing the predicted velocity field about an isolated propeller with detailed laser Doppler velocimeter measurements and by comparison with mean loads measured in a wing-propeller experiment. Comparisons have also been made between the fluctuating loads predicted by the present method and a quasisteady vortex lattice scheme.

Williams, Marc H.↗

Estimation of Length-Scales in Soils by MRI

Soil can be best described as an unconsolidated granular media that forms porous structure. The present macroscopic theory of water transport in porous media rests upon the continuum hypothesis that the physical properties of porous media can be associated with continuous, twice-differentiable field variables whose spatial domain is a set of centroids of Representative Elementary Volume (REV) elements. MRI is an ideal technique to estimate various length-scales in porous media. A 0.267 T permanent magnet at NASA GRC was used for this study. A 2D or 3D spatially-resolved porosity distribution were obtained from the NMR signal strength from each voxel and the spin-lattice relaxation time. A classical spin-warp imaging with Multiple Spin Echos (MSE) was used to evaluate proton density in each voxel. Initial resolution of 256 x 256 was subsequently reduced by averaging neighboring voxels and the porosity convergence was observed. A number of engineered "space candidate" soils such as Isolite(trademark), Zeoponics(trademark), Turface(trademark), and Profile(trademark) were used. Glass beads in the size range between 50 microns to 2 mm were used as well. Initial results with saturated porous samples have shown a good estimate of the average porosity consistent with the gravimetric porosity measurement results. For Profile(trademark) samples with particle sizes ranging between 0.25 to 1 mm and characteristic interparticle pore size of 100 microns the characteristic Darcy scale was estimated to be about delta(sub REV) = 10 mm. Glass beads porosity show clear convergence toward a definite REV which stays constant throughout homogeneous sample. Additional information is included in the original extended abstract.

N E Daidzic↗

Nucleon tensor form factors at large N c

We investigate nucleon tensor form factors in the large- N c limit. In this picture, the nucleon emerges as a state of the N c valence quarks, which were bound by pion mean fields that were created by the presence of the valence quarks self-consistently. We find that the tensor charge ( g T u − d = 0.99 ) and the anomalous tensor magnetic moment ( κ T u + d = 7.61 ) are dominated by valence quarks, while the tensor quadrupole moment ( Q T u − d = − 7.02 ) shows significant sea quark effects. We examine how these quantities vary as the average size of the pion mean field is changed, showing interpolation between nonrelativistic quark and Skyrme limits. We also observe that g T u − d and κ T u + d depend weakly on the pion mass. In contrast, Q T u − d exhibits strong enhancement near the chiral limit. The numerical results are in good agreement with available lattice quantum chromodynamics (QCD) data and provide predictions for unmeasured quantities. Published by the American Physical Society 2025

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Shedding light on charmonium

We investigate E1 radiative transitions within charmonium in a relativistic approach based on light-front QCD. In quantum field theory, two sets of processes are pure E1: χ c 0 → J / ψ γ ( ψ → χ c 0 γ ) and h c → η c γ ( η c ′ → h c γ ), both involving the P -wave charmonia. We compute the E1 radiative decay widths as well as the corresponding transition form factors of various processes including those involving 2 P states. These observables provide an access to the microscopic structures of the P -wave charmonium. We show that our parameter-free predictions are in excellent agreement with the experimental measurements as well as lattice simulations whenever available. Published by the American Physical Society 2024

Astronomy & Astrophysics↗

Davis Computational Spectroscopy Workflow—From Structure to Spectra

Here, we describe an automated workflow that connects a series of atomic simulation tools to investigate the relationship between atomic structure, lattice dynamics, materials properties, and inelastic neutron scattering (INS) spectra. Starting from the atomic simulation environment (ASE) as an interface, we demonstrate the use of a selection of calculators, including density functional theory (DFT) and density functional tight binding (DFTB), to optimize the structures and calculate interatomic force constants. We present the use of our workflow to compute the phonon frequencies and eigenvectors, which are required to accurately simulate the INS spectra in crystalline solids like diamond and graphite as well as molecular solids like rubrene. We have also implemented a machine-learning force field based on Chebyshev polynomials called the Chebyshev interaction model for efficient simulation (ChIMES) to improve the accuracy of the DFTB simulations. We then explore the transferability of our DFTB/ChIMES models by comparing simulations derived from different training sets. We show that DFTB/ChIMES demonstrates ~100× reduction in computational expense while retaining most of the accuracy of DFT as well as yielding high accuracy for different materials outside of our training sets. The DFTB/ChIMES method within the workflow expands the possibilities to use simulations to accurately predict materials properties of increasingly complex structures that would be unfeasible with ab initio methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Colloquium: Ice rule and emergent frustration in particle ice and beyond

Geometric frustration and the ice rule are two concepts that are intimately connected and widespread across condensed matter. The first refers to the inability of a system to satisfy competing interactions in the presence of spatial constraints. The second, in its more general sense, represents a prescription for the minimization of the topological charges in a constrained system. Both can lead to manifolds of high susceptibility and nontrivial, constrained disorder where exotic behaviors can appear and even be designed deliberately. This Colloquium describes the emergence of geometric frustration and the ice rule in soft condensed matter. It excludes the extensive developments of mathematical physics within the field of geometric frustration, but rather focuses on systems of confined microscopic or mesoscopic particles that emerge as a novel paradigm exhibiting spin degrees of freedom. In such systems, geometric frustration can be engineered artificially by controlling the spatial topology and geometry of the lattice, the position of the individual particle units, or their relative filling fraction. These capabilities enable the creation of novel and exotic phases of matter and also potentially lead toward technological applications related to memory and logic devices that are based on the motion of topological defects. The rapid progress in theory and experiments is reviewed and the intimate physical connections with other frustrated systems at different length scales are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Calculation of aerodynamic characteristics of STOL aircraft with externally-blown jet-augmented flaps.

Analytical methods to predict the interference between lifting surfaces and high-bypass-ratio turbofan engines are described. A three-dimensional nonplanar vortex-lattice lifting surface method is used to predict the characteristics of a wing with leading-edge slat and multiple slotted trailing-edge flaps including effects of externally induced velocity fields. A flow model of the wake of a high-bypass-ratio turbofan is described which is capable of predicting the induced velocity field both inside and outside the jet wake. These methods are combined to predict the longitudinal characteristics of several STOL transport models utilizing externally-blown flaps and comparisons with data are shown. The results indicate good agreement between experiment and theory for various configurations under a wide range of power conditions.

Mendenhall, M. R.↗

Sachdev-Ye-Kitaev models and beyond: Window into non-Fermi liquids

In this work is a review of the Sachdev-Ye-Kitaev (SYK) model of compressible quantum many-body systems without quasiparticle excitations, and its connections to various theoretical studies of non-Fermi liquids in condensed matter physics. The review is placed in the context of numerous experimental observations on correlated electron materials. Strong correlations in metals are often associated with their proximity to a Mott transition to an insulator created by the local Coulomb repulsion between the electrons. The phase diagrams of a number of models of such a local electronic correlation are explored, employing a dynamical mean-field theory in the presence of random spin exchange interactions. Numerical analyses and analytical solutions, using renormalization group methods and expansions in large spin degeneracy, lead to critical regions that display SYK physics. The models studied include the single-band Hubbard model, the t–J model, and the two-band Kondo-Heisenberg model in the presence of random spin exchange interactions. Also examined are non-Fermi liquids obtained by considering each SYK model with random four-fermion interactions to be a multiorbital atom, with the SYK atoms arranged in an infinite lattice. Connections are made to theories of sharp Fermi surfaces without any low-energy quasiparticles in the absence of spatial disorder, obtained by coupling a Fermi liquid to a gapless boson; a systematic large-N theory of such a critical Fermi surface, with SYK characteristics, is obtained by averaging over an ensemble of theories with random boson-fermion couplings. Finally, an overview of the links between the SYK model and quantum gravity is presented, and the review ends with an outlook on open questions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Shock compression behavior of stainless steel 316L octet-truss lattice structures

Lattice structures offer desirable mechanical properties for applications of energy absorption and impact mitigation but limited research has been carried out on their shock compression behavior. In this work, the shock compression behavior of stainless steel 316L (SS316L) octet-truss lattice structures was investigated through experimental techniques and numerical simulations. Plate impact experiments with high-speed imaging were conducted at impact velocities of 270 – 390 m/s on lattice specimens with 5x5x10 unit cell geometries additively manufactured (AM) using direct metal laser sintering. High-speed imaging together with digital image correlation was used to extract full-field measurements and define a two-wave structure consisting of an elastic wave and planar compaction (shock) wave which propagated along the impact direction. A linear shock velocity versus particle velocity relation was found to approximate the measurements with a unit slope and a linear fit constant equal to the crushing speed. Furthermore, the shock velocity versus particle velocity relation, full-field measurements, and elastic limit together with the Eulerian form of the Rankine-Hugoniot jump conditions were used to find relations for the stress and internal energy behind the shock. Stress behind the shock increased with relative density and particle velocity, and specific internal energy converged to a single curve similar to that of bulk AM SS316L. Explicit finite element analysis using the Johnson-Cook constitutive model demonstrated similar shock behavior observed in experiments and a linear shock velocity versus particle velocity relation and corresponding Hugoniot calculations were found to be in agreement with experimental results. Numerical simulations confirmed negligible effects of exterior versus interior measurements and further validated the application of one-dimensional shock theory.

42 ENGINEERING↗