Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LANTHANIDE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Chemically Enhanced Electrodialysis (CEED) for Recovery of Rare Earth Elements

Rare-earth elements are crucial for numerous technologically relevant industries including energy, electronics, and aerospace; however, both the supply and separation of rare earths are pressing challenges. The long-term goal of the collaborative project is to develop a novel approach to existing extraction behaviors. To achieve this goal, a class of electrodialysis membranes with novel ion-gating functionality will be developed and paired with a conventional electrodialysis strategy. The hypothesis of the work is that incorporating sequestrants of suitable structures at the surface of the electrodialysis membrane will enhance extraction efficiency for ions of interest. Our ability to prepare sequestrants of diverse conformations and to adapt their molecular structure for binding lanthanides renders the proposed technology a versatile method for selective ion separation. Our approach will enable an entirely new technological approach to the separation of valuable rare-earth elements.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Development of High Energy Resolution Fluorescence Detection Methods for Advanced Microscale X-ray Absorption Fine Structure Analysis of Critical Elements (Final Report)

This project is developing High-Energy Resolution Fluorescence Detection (HERFD) X-ray Absorption Fine-Structure Spectroscopy (XAFS) at the hard X-ray microprobe beamline at GSECARS beamline 13-ID-E, at the Advanced Photon Source at Argonne National Laboratory. This enhancement will improve sensitivity and spectral interpretation limitations of conventional XAFS which uses energy dispersive solid-state detectors (SSD) to measure the total fluorescence yield (TFY-XAFS). By using high-quality Si and Ge crystal analyzers to select X-ray fluorescence (XRF) from specific emission lines, background signals from other elements or X-ray scattering that can paralyze SSDs can be nearly eliminated, improving the sensitivity to the oxidation and chemical state of dilute species even though the solid angle of the analyzers is relatively small. Furthermore, by using analyzers of low-strain Si or Ge, the energy selection can be smaller than the natural widths of the core electron level. We are particularly interested in applying these enhanced sensitivities to Lanthanide series of rare-earth elements, which are typically at concentrations at or below 10 ppm, and where spectral overlaps with the 3rd row transition metals degrade sensitivity.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Salt Sampling FY21 Technical Report

The goal of the salt sampling program at Argonne is to develop and deploy automated molten salt sampling approaches to enable high-precision in-process salt sample analysis to improve the timeliness of sampling-based accountancy measurements. Tools currently under development in support of this goal include (1) a modular vacuum sampler with an accompanying sample handling method for coupling vacuum sampling with high-precision at-line sample analysis, (2) a pneumatic sample generator that enables high-throughput sample analysis to improve the precision of existing analytical techniques, and (3) a windowless flow cell to enable on-line optical analysis of molten salt in a sampling loop. Compared to point sampling approaches (i.e., dip probes), vacuum sampling systems and on-line sampling loops facilitate access to a larger cross-section of a process fluid. This is known to improve the characterization of the process fluid by producing more representative samples and by enabling the analysis of a larger cross section of the fluid. A vacuum sampling approach for molten salts eliminates the risk of dross contamination of samples and avoids the use of moving parts in the salt. In FY21, two methods for integrating a vacuum sampler with a pneumatic sample generator were tested. These included direct fluidic coupling and coupling using a solid salt transfer mechanism. Solid salt transfer was ultimately selected over fluidic coupling, primarily to enable the transport of samples over longer distances to support automated at-line integration with high-precision techniques (such as microcalorimetry) that cannot withstand the extreme conditions near an electrorefining process. To facilitate rapid solid salt coupling, new mechanisms were developed for rapidly charging and discharging salt sample tubes at the vacuum sampler and pneumatic sample generator, respectively. While the charging mechanism will be deployed in FY22, the tube transfer method and discharge mechanism were tested in FY21. These were deployed at one of Argonne’s engineering-scale electrorefiners to implement at-line high-throughput pneumatic micro-sample generation capabilities. The method was used to generate precise uranium- and lanthanide-bearing electrorefiner micro-samples with the specific dimensions requested by researchers at Los Alamos National Laboratory for use in testing their novel microcalorimeter x-ray techniques. The solid salt transfer mechanism proved not only to be an effective means of integrating the precision sample generator with vacuum sampling, but also improved the performance of the sampler generator. Because the modular sampling approach described here eliminates the need for new high-radiation sample handling capabilities, salt-wetted seals, salt-wetted moving parts, and heated transfer lines outside the electrorefiner, it will address most of the remaining technical challenges for the at-line deployment of high-precision analytical techniques. This will enable significant reductions in the time delay for sampling-based accountancy measurements by eliminating the need for manual off-line sample processing and analysis. On-line optical analysis of molten salt in a sampling loop would provide complementary information to at-line and in-situ techniques. In FY21, an open-aperture molten salt gravity flow cell with windowless optical access to flowing salt was successfully demonstrated. Future work should include the refinement and performance testing of the on-line and at-line sampling tools, integration of additional analysis techniques, stakeholder outreach and collaboration, evaluation of the integrated methods, and analyses to determine how the various tools might fit into an integrated safeguards monitoring system of unattended near real time monitoring tools.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Deployment of salt sample extraction system at an engineering-scale electrorefiner

The goal of the salt sampling program at Argonne is to develop and deploy automated molten salt sampling approaches for interfacing relevant unit operations with salt analysis to improve the timeliness of sampling-based accountancy measurements. Two technologies under development in support of this goal are a vacuum sampling loop module and a high-throughput pneumatic sample generator module. Compared to traditional point sampling approaches (i.e., dip probes), the vacuum sampling loop facilitates the collection of a larger cross-section of the bulk salt in order to collect more representative samples. The vacuum sampling approach also eliminates the risk of dross contamination of samples and avoids the use of moving parts in the salt. The pneumatic sample generator module is used to facilitate high-throughput sample analysis to improve the measurement precision of any given analytical technique by averaging out random sampling and measurement errors. In FY21, two methods for integrating these two modules were tested including direct fluidic coupling and coupling using a solid salt transfer mechanism. Solid salt transfer was ultimately selected over fluidic coupling, primarily to enable the transport of samples over longer distances to support automated at-line integration with high-precision techniques (such as microcalorimetry) that cannot withstand the conditions near an electrorefining process. To facilitate rapid solid salt coupling, new mechanisms were developed for rapidly charging and discharging salt sample tubes at the vacuum sampling loop and pneumatic sample generator modules, respectively. While the charging mechanism will be deployed in FY22, the discharge mechanism was tested in FY21 and is described here. The solid salt tube transfer method was deployed at one of Argonne’s engineering-scale electrorefiners to implement at-line high-throughput pneumatic micro-sample generation capabilities. The approach was used to generate precise uranium- and lanthanide-bearing electrorefiner micro-samples with the specific dimensions requested by researchers at Los Alamos National Laboratory for use in testing their novel microcalorimeter x-ray techniques. The solid salt transfer mechanism proved not only to be an effective means of integrating the precision sample generator with vacuum sampling, but also improved the performance of the sampler generator. To discharge salt from the sample tubes at the sampler generator, tube segments were inserted directly into the sample generator’s Helmholtz chamber and pressure pulse actuations were used to generate precision molten salt samples directly from the tube segments. The direct insertion of sample tubes into the sample generator enabled rapid loading of the salt and prevented salt from contacting most of the interior surfaces of the sample generator, which eliminated cross-contamination between runs. The vacuum sampling-loop tube charging mechanism will support high-throughput tube sampling operations by employing a dynamic vacuum filling process to fill short charge tubes that are configured to be rapidly connected and disconnected from the loop. The dynamic vacuum sampling operation will be automated, and sample tube handling can be executed with simple overhead actuation. Because the modular sampling approach described here eliminates the need for new high-radiation sample handling capabilities, salt-wetted seals, salt-wetted moving parts, and heated transfer lines outside the electrorefiner, it will address most of the remaining technical challenges for the at-line deployment of high-precision analytical techniques which will enable significant reductions in the time delay for sampling-based high-precision accountancy measurements.

42 ENGINEERING↗
DOE OSTI2025

Probing lanmodulin's mechanisms of rare-earth selectivity for protein-based bioseparations

Our BES Separation Science program project, DE-SC0021007, supported our efforts to begin to understand the mechanisms underlying selectivity of a novel class of lanthanide-binding proteins discovered by our laboratory, called lanmodulin (LanM), and to leverage these proteins for recovery and separations of trivalent rare earth elements (REEs) as well as of trivalent actinides. Overall, our work provides important insights into how higher-order (e.g., secondary, tertiary, and quaternary) protein structure modulates selectivity profiles of proteins that bind f-elements highly selectively. These results are important for advancing the concept of protein-based separations of REEs and, perhaps, of other critical minerals.

Lanmodulin, rare earth elements, protein-based met↗
DOE OSTI2026

Optimizing enzymes for plastic upcycling using machine learning design and high throughput experiments

Plastic use is ubiquitous in the modern world, and polyethylene terephthalate (PET) is one of the most abundantly produced plastics (and the most highly produced polyester), with ~65 million metric tons manufactured annually. To the consumer, PET is likely most recognizable as the plastic used to make beverage bottles. Like many plastics, traditional mechanical or chemical means of PET deconstruction and upcycling are costly and inefficient. Because of these challenges, recycled plastic is generally of lower quality and is more expensive to produce than virgin plastic derived from petroleum. Ultimately, this results in most plastic ending up as waste. We view plastic waste as an underutilized resource which, with the development of more efficient and high-quality recycling processes, could (1) generate significant economic value while (2) decreasing petroleum usage and greenhouse gas emissions, as well as (3) minimizing its negative environmental and health impacts. Biocatalytic recycling, or biomanufacturing the basic building blocks of new plastic from plastic waste, is a promising approach to plastic reuse that complements existing recycling technologies. Recently, biological enzymes capable of breaking down PET have garnered significant attention as an attractive means of dealing with the plastic problem. These enzymes are currently undergoing pilot studies for implementation in industrial-scale enzyme-based recycling. However, there are significant limitations to current enzymes, including the need to perform costly pre-processing of the plastic waste before the enzymes are able to work. Further optimization of these enzymes is necessary to make these technologies competitive, and ultimately incentivise industry-wide adoption of this biology-based green recycling technology. n this work we demonstrate a means to design and generate performant biological enzymes, capable of efficiently deconstructing plastic waste. Specifically, we applied recent advances in artificial intelligence, machine learning, and statistical analysis to design new versions and discover natural enzymes capable of breaking down PET. We focused on optimizing key properties that are important for industrial-scale enzymatic recycling such as pH and thermotolerance. Normal testing of enzymatic plastic-deconstruction is extremely labor intensive and so through this work we also developed a robotic-assisted experimental pipeline capable of characterizing thousands of candidate enzymes. The results of this iterative, AI-guided, multi-discipline approach have led to increases in enzymatic breakdown of over 150X over starting enzymes. This work supports the rapidly developing and transformative field of biocatalytic solutions to environmental problems beyond the discovery and predictive understanding of enzymes for polymer recycling, and has wide implications for tackling numerous energy problems such as carbon capture and fixation (e.g., engineering carbon monoxide dehydrogenase and the rubisco-pathway), biomining (e.g., design of lanthanide-binding proteins) and biomanufacturing (e.g., lignin-deconstruction enzymes).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Optical-Gating of Spin-based Quantum States (Final Report)

This project developed a generalizable strategy for optical control of spin-based quantum states through the Photoisomerization-Induced Spin–Charge Excited State (PISCES) process, in which a photochromic spirooxazine ligand bound to an electronically bistable metal complex enables reversible, room-temperature optical switching of spin states in both dilute matrices and the solid state. A multidisciplinary team integrated synthesis, spectroscopy, theory, and surface science to establish design principles for opto-spintronic quantum materials. Systematic structure–property studies across four spirooxazine series revealed that donor–π–acceptor interactions govern thermal isomerization, which proceeds via a rotational pathway. Pulsed EPR measurements demonstrated millisecond-scale coherence times in cobalt-dioxolene-spirooxazine complexes, establishing their promise as optically addressable molecular qubits; the approach was extended to Cu(II), Ni(II), and lanthanide complexes, including optical modulation of zero-field splittings and clock transitions. Two-dimensional IR spectroscopy resolved picosecond ground-state population exchange dynamics, while ab initio calculations elucidated photoisomerization mechanisms and parametrized Hamiltonians for spin relaxation and decoherence. Toward device integration, the team fabricated 2D polymer scaffolds for covalent qubit organization, developed tip-enhanced Raman imaging of molecular monolayers, and demonstrated optical gating of gate voltage in spirooxazine-graphene field-effect transistors. The project produced numerous publications, dissertations, and presentations, and trained over 30 researchers.

2D polymers↗
DOE OSTI2026

Rational Design of Lanmodulin Variants for Size-Based Selectivity of Individual Rare Earth Elements

Rare earth elements (REEs) are essential to modern technologies, yet their high physical and chemical similarity makes separation of individual REEs difficult and environmentally taxing. Metalloproteins offer a promising alternative for selective REE binding, as they tend to have high metal ion affinity and specificity. Lanmodulin (LanM), in particular, has arisen as a potential candidate for REE separation as it exhibits picomolar affinity for elements in the REE family. Prior work has shown that the single point mutation D9N can shift LanM’s preference away from lanthanides toward actinides, motivating efforts to tune selectivity of LanM through targeted mutagenesis. Here, we tested the hypothesis that introducing selective aspartic acid to glutamic acid substitutions in the metal coordinating EF hands of LanM would impose steric constraints that would drive LanM affinity away from larger ions, such as La3+, to smaller ions, such as Y3+. To test this hypothesis, a combination of computational and experimental approaches were employed to evaluate the signal mutations LanM D5E and LanM D3E and the double mutants LanM D1ED5E and LanM D3ED9E. Surprisingly, increasing the number of mutations within the metal center did not enhance affinity for smaller REEs, or decrease affinity for larger ions. Only the single point mutation LanM D5E weakened La3+ binding by one order of magnitude relative to LanM wild type (WT), and pairing it with a second mutation to produce LanM D1ED5E drove La3+ affinity to be stronger than that seen for LanM WT. The D3E mutation alone prevented proper expression and folding, but paring it with D9E to produce LanM D3ED9E rescued expression and yielded La3+ affinities comparable to LanM WT. All variants that expressed (LanM D5E, LanM D1ED5E, LanM D3ED9E) displayed Y3+ affinities comparable to LanM WT. Overall, these results highlight the tunability of LanM’s metal-binding environment but also expose current limitations in predicting structural responses to point mutations within a protein sequence. This work establishes a foundation that can be used for refining computational and experimental strategies to engineer metalloproteins with tailored REE selectivity.

Close, Emily [Pacific Northwest National Laborator↗
DOE OSTI2021

Editorial: Selective Controls on Microbial Energy Metabolisms: From the Microscale to the Macroscale

A mechanistic and predictive understanding of the genotypic and phenotypic controls on microbial element cycling remains a grand challenge in microbiology. While the composition and concentration of carbon sources, electron donors, and electron acceptors are known to influence microbial community structure by selecting for microbial sub-populations with distinct catabolic and respiratory pathways, selective inhibitors and trace nutrient availability modulate the activity of metabolic enzymes. This in turn influences the distribution of microbial sub-populations with distinct metabolic and respiratory traits, which are then structured by complex multi-dimensional environmental gradients that influence the composition, gene content and element cycling activity of microbiomes. While some parameters are known to select for different respiratory activities (e.g., lanthanides as essential nutrients for methanotrophs, molybdate as a specific inhibitor of sulfate reduction, carbon:nitrogen ratio and concentration as a control on the end-products of nitrate respiration), there are others to discover, and demonstrating how selective parameters operate and mediate element cycling across scales requires multi-disciplinary research in both the lab and field.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Low-Energy Electron Elastic Total Cross Sections for Ho, Er, Tm, Yb, Lu, and Hf Atoms

The robust Regge-pole methodology wherein is fully embedded the essential electron-electron correlation effects and the vital core polarization interaction has been used to explore negative ion formation in the large lanthanide Ho, Er, Tm, Yb, Lu, and Hf atoms through the electron elastic total cross sections (TCSs) calculations. These TCSs are characterized generally by dramatically sharp resonances manifesting ground, metastable, and excited negative ion formation during the collisions, Ramsauer-Townsend minima, and shape resonances. The novelty and generality of the Regge-pole approach is in the extraction of the negative ion binding energies (BEs) of complex heavy systems from the calculated electron TCSs. The extracted anionic BEs from the ground state TCSs for Ho, Er, Tm, Yb, Lu, and Hf atoms are 3.51 eV, 3.53 eV, 3.36 eV, 3.49 eV, 4.09 eV and 1.68 eV, respectively. The TCSs are presented and the extracted from the ground; metastable and excited anionic states BEs are compared with the available measured and/or calculated electron affinities. We conclude with a remark on the existing inconsistencies in the meaning of the electron affinity among the various measurements and/or calculations in the investigated atoms and make a recommendation to resolve the ambiguity.

Felfli, Zineb↗
DOE OSTI2022

Crystal Growth and Electronic Properties of LaSbSe

The ZrSiS-type materials have gained intensive attentions. The magnetic version of the ZrSiS-type materials, LnSbTe (Ln = Lanthanide), offers great opportunities to explore new quantum states owing to the interplay between magnetism and electronic band topology. Here, we report the growth and characterization of the non-magnetic LaSbSe of this material family. We found the metallic transport, low magnetoresistance and non-compensated charge carriers with relatively low carrier density in LaSbSe. The specific heat measurement has revealed distinct Sommerfeld coefficient and Debye temperature in comparison to LaSbTe. Such addition of a new LnSbSe selenide compound could provide the alternative material choices in addition to LnSbTe telluride materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Thorium and Rare Earth Monoxides and Related Phases

Thorium was a part of energy infrastructure in the 19th century due to the refractory and electronic properties of its dioxide. It will be a part of future energy infrastructure as the most abundant energy reserve based on nuclear fission. This paper discusses the solid-state chemistry of the monoxides and related rocksalt phases of thorium and the rare earths, both at atmospheric and at high pressure. The existence of solid thorium monoxide was first suggested more than 100 years ago; however, it was never obtained in bulk and has been studied mostly theoretically. Monoxides of lanthanides from Eu to Ho are ferromagnetic semiconductors sought for spintronics and were studied in thin films. La to Sm metallic monoxides were synthesized in bulk at pressures below 5 GPa. Recently, ThO formation in thin films has been reported and the stability of bulk ThO at high pressure was theoretically predicted based on first principles computations at 0 K. New ab initio computations were performed accounting for temperature effects up to 1000 K using lattice dynamics in the quasi-harmonic approximation. New computational results confirm the stabilization of pure ThO above 30 GPa and suggest the possibility of high-pressure synthesis of (Th,Nd)O at 1000 K and 5 GPa.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Tetrafluoroboric Acid Digestion for Accurate Determination of Rare Earth Elements in Coal and Fly Ash by ICP-MS Analysis

Coal and coal-related fly ash often contain rare earth elements (REEs) that have the potential to be utilized as valuable mineral resources. Accurately determining the REE content in coal and fly ash is crucial for resource evaluation. The conventional approach involves using hydrofluoric acid (HF) to dissolve silicates and release REEs, which, however, prolongs the digestion process due to the additional step of complexing fluoride ions (F−) with boric acid (H3BO3). Determining the correct amount of H3BO3 for neutralization can be challenging, and in some instances, the binding of fluoride ions with certain lanthanides (Lns) hampers the accurate determination of all 14 naturally occurring rare earth elements in a single digestion batch by inductively coupled plasma mass spectrometry (ICP-MS). In this study, we present an alternative method that achieves the accurate determination of all 14 naturally occurring REEs using tetrafluoroboric acid (HBF4) followed by ICP-MS analysis. This approach eliminates the need for an F− complexing step. We tested this method on certified REE reference materials, including NIST 1632e (coal) and NIST 1633c (fly ash), as well as the REE geological reference material USGS AGV-1 (andesite). Our results demonstrated excellent recovery rates (relative standard deviation, RSD < ±10%), with a correlation coefficient (r2) exceeding 0.99. Using this method, we investigated the concentrations of all 14 REEs in coal and fly ash samples collected from various locations in the southwestern USA. This improved digestion technique streamlines the analysis process and enhances the accuracy of REE determination, facilitating a more comprehensive evaluation of REE-rich coal and fly ash deposits for resource exploration.

58 GEOSCIENCES↗
DOE OSTI2022

The Synthesis and Structure of a Scandium Nitrate Hydroxy-Bridged Dimeric Complex Supported by Bipyridyl Ligands

The current discussion on whether scandium, yttrium and lanthanum should represent Group 3 in the Periodic Table or whether lutetium should replace lanthanum in the group has prompted us to further explore the structural chemistry of the Group 3 elements and compare the coordination numbers and coordination geometries adopted. The steric and electronic properties of the coordinated ligands have a major influence on the structures adopted. We report the synthesis and crystal structure determination of an unusual dinuclear scandium complex [(bipy)(NO 3 ) 2 Sc(µ-OH) 2 Sc(NO 3 ) 2 (bipy)] obtained by the reaction of hydrated scandium nitrate with 2,2'-bipyridyl (bipy) in either ethanol or nitromethane. The crystal structure of the complex shows that the scandium centers are eight coordinate, and the structure obtained contrasts with related complexes found in the lanthanide series [Ln(bipy) 2 (NO 3 ) 3 ] and [Ln(phen) 2 (NO 3 ) 3 ] (phen = phenanthroline) and in [M(terpy)(NO 3 ) 3 ] (M = Sc, Er–Lu), where these complexes are all mononuclear.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Constraints on the Physical Properties of GW190814 through Simulations Based on DECam Follow-up Observations by the Dark Energy Survey

On 2019 August 14, the LIGO and Virgo Collaborations detected gravitational waves from a black hole and a 2.6 solar mass compact object, possibly the first neutron star–black hole merger. In search of an optical counterpart, the Dark Energy Survey (DES) obtained deep imaging of the entire 90% confidence level localization area with Blanco/DECam 0, 1, 2, 3, 6, and 16 nights after the merger. Objects with varying brightness were detected by the DES Pipeline, and we systematically reduced the candidate counterparts through catalog matching, light-curve properties, host-galaxy photometric redshifts, Southern Astrophysical Research spectroscopic follow-up observations, and machine-learning-based photometric classification. All candidates were rejected as counterparts to the merger. To quantify the sensitivity of our search, we applied our selection criteria to full light-curve simulations of supernovae and kilonovae as they would appear in the DECam observations. Because the source class of the merger was uncertain, we utilized an agnostic, three-component kilonova model based on tidally disrupted neutron star (NS) ejecta properties to quantify our detection efficiency of a counterpart if the merger included an NS. We find that, if a kilonova occurred during this merger, configurations where the ejected matter is greater than 0.07 solar masses, has lanthanide abundance less than 10 -8.56 , and has a velocity between 0.18c and 0.21c are disfavored at the 2σ level. Furthermore, we estimate that our background reduction methods are capable of associating gravitational wave signals with a detected electromagnetic counterpart at the 4σ level in 95% of future follow-up observations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Modeling Kilonova Light Curves: Dependence on Nuclear Inputs

The mergers of binary neutron stars, as well as black hole–neutron star systems, are expected to produce an electromagnetic counterpart that can be analyzed to infer the element synthesis that occurred in these events. We investigate one source of uncertainties pertinent to lanthanide-rich outflows: the nuclear inputs to rapid neutron capture nucleosynthesis calculations. We begin by examining 32 different combinations of nuclear inputs: eight mass models, two types of spontaneous fission rates, and two types of fission daughter product distributions. We find that such nuclear physics uncertainties typically generate at least one order of magnitude uncertainty in key quantities such as the nuclear heating (one and a half orders of magnitude at 1 day post-merger), the bolometric luminosity (one order of magnitude at 5 days post-merger), and the inferred mass of material from the bolometric luminosity (factor of 8 when considering the 8–10 day region). Since particular nuclear processes are critical for determining the electromagnetic signal, we provide tables of key nuclei undergoing β-decay, α-decay, and spontaneous fission important for heating at different times, identifying decays that are common among the many nuclear input combinations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

The Broadband Counterpart of the Short GRB 200522A at z = 0.5536: A Luminous Kilonova or a Collimated Outflow with a Reverse Shock?

In this work, we present the discovery of the radio afterglow and near-infrared (NIR) counterpart of the Swift short gamma-ray burst (GRB) GRB 200522A, located at a small projected offset of ≈1 kpc from the center of a young, star-forming host galaxy at z = 0.5536. The radio and X-ray luminosities of the afterglow are consistent with those of on-axis cosmological short GRBs. The NIR counterpart, revealed by our Hubble Space Telescope observations at a rest-frame time of ≈2.3 days, has a luminosity of ≈(1.3–1.7) × 10 42 erg s -1 . This is substantially lower than on-axis short GRB afterglow detections but is a factor of ≈8–17 more luminous than the kilonova of GW170817 and significantly more luminous than any kilonova candidate for which comparable observations exist. The combination of the counterpart's color (i - y = -0.08 ± 0.21; rest frame) and luminosity cannot be explained by standard radioactive heating alone. Additionally, we present two scenarios to interpret the broadband behavior of GRB 200522A: a synchrotron forward shock with a luminous kilonova (potentially boosted by magnetar energy deposition), or forward and reverse shocks from a ≈14°, relativistic (Γ0 ≳ 10) jet. Models that include a combination of enhanced radioactive heating rates, low-lanthanide mass fractions, or additional sources of heating from late-time central engine activity may provide viable alternate explanations. If a stable magnetar was indeed produced in GRB 200522A, we predict that late-time radio emission will be detectable starting ≈0.3–6 yr after the burst for a deposited energy of ≈10 53 erg. Counterparts of similar luminosity to GRB 200522A associated with gravitational wave events will be detectable with current optical searches to ≈250 Mpc.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Reconstructing Masses of Merging Neutron Stars from Stellar r -process Abundance Signatures

We report that neutron star mergers (NSMs) are promising astrophysical sites for the rapid neutron-capture ("r") process, but can their integrated yields explain the majority of heavy-element material in the Galaxy? One method to address this question implements a forward approach that propagates NSM rates and yields along with stellar formation rates and compares those results with observed chemical abundances of r-process-rich, metal-poor stars. In this work, we take the inverse approach by utilizing r-process-element abundance ratios of metal-poor stars as input to reconstruct the properties -especially the masses - of their neutron star (NS) binary progenitors. This novel analysis provides an independent avenue for studying the population of the original NS binary systems that merged and produced the r-process material now incorporated in Galactic metal-poor halo stars. We use ratios of elements typically associated with the limited-r-process and the actinide region to those in the lanthanide region (i.e., Zr/Dy and Th/Dy) to probe the NS masses of the progenitor merger. We find that NSMs can account for all r-process material in metal-poor stars that display r-process signatures, while simultaneously reproducing the present-day distribution of double-NS systems. Notably, with our model assumptions and the studied stellar sample, we postulate that the most r-process enhanced stars (the r–II stars) on their own would require progenitor NSMs of asymmetric systems that are distinctly different from present ones in the Galaxy. We also explore variations to the model and find that the predicted degree of asymmetry is most sensitive to the electron fraction of the remnant disk wind.

79 ASTRONOMY AND ASTROPHYSICS↗