Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LANL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Numerical Analysis and Flow Induced Vibration Studies in Pressurized Helium Gas Cooling Channels

Los Alamos National Laboratory (LANL) is working with NorthStar Medical Radioisotopes (NMR) on their efforts to produce Mo-99 from the irradiation of Mo-100 targets. The NMR target consists of an Inconel window that allows the electron beam to penetrate and irradiate a stack of Mo-100 discs. The irradiation process generates large amounts of heat and is cooled using pressurized helium gas flowing at 400 g/s. LANL provides both numerical analysis support and experimental support. Computational fluid dynamics (CFD) simulations for both 300 g/s and 400 g/s are performed on the NMR target to analyze the helium flow through the NMR system. The pressure drop, the mass flow rate through each of the disc and window channels and the force applied on the first disc are some of the quantities estimated using CFD. These results will be combined with Monte Carlo N-Particle (MCNP) estimates of heat flux into the system from the electron beam to perform conjugate heat transfer analysis (CHT). The experiments presented in this report focus on the effect of the flow induced vibrations from helium flowing through the coolant gaps between the discs. There is concern that the flow induced vibrations may lead to excessive mass loss of the enriched Mo-100 discs, and the goal would be to mitigate the mass loss. This work presents benchtop tests of flow through a subset of the target stack which involves high speed imaging and displacement measurements used to estimate disc vibration, as well as mass loss.

42 ENGINEERING↗

Tools for Assessing Performance: FY23-Q1 Report [Slides]

LANL was tasked with working with NREL to implement QUIC within the TAP API by the end of Q1, FY2023. If QUICURB cannot be implemented in a way that it can be run outside of the QUIC platform, there will be no further R&D funding for QUIC development. QUIC includes a graphical user interface that imports and preprocesses the various input data streams (3D building databases, ambient wind, vegetation, etc.) and writes them in a format that the QUICURB Fortran executable requires. In order to interface with the TAP API, a Python script was developed that would replace the functionality previously only available within QUICGUI. LANL worked with NREL to test the Python script to ensure that it was operation and fulfilled the requirements.

58 GEOSCIENCES↗

w22_laser_radiography - Laser-Based MeV Radiography

This project seeks to develop novel x-ray sources based on high-power short-pulse lasers with unique advantages, including small spot size, flexible configuration, and tailorable spectra. Kinetic plasma simulations using the VPIC particle in cell code will be performed to support the R&D goals of this project. If successful, this effort will allow LANL to deploy flexible, compact x-ray sources for static tomographic radiography and dynamic multi-axis radiography at our firing sites and facilities such as pRad and U1a. The higher resolution, shorter pulse duration, and tunability of our proposed sources will enable new applications in the weapons program and broader scientific community. This effort advances the LANL FY22 Strategic Investment Plan priority of “[r]adiographic tools for dynamic and static imaging with improved spatial and temporal resolution, sensitivity, and dose.”

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Agent-Based Models for COVID-19 [Slides]

Goals: 1) Evaluate "what if” scenarios and mitigation strategies to combat COVID-19 spread within LANL and 2) perform retrospective analysis to assess accuracy of LANL COVID-19 agent-based model (ABM).

60 APPLIED LIFE SCIENCES↗

Packaging Capacity Calculation: Pu Oxide Packaging Options with the 2 Quart SAVY Container

This calculation supports programmatic efforts to Dilute and Dispose Pu. Metal is to be oxidized at LANL, then transported to SRS for dilution at SRS. Ultimately, the diluted oxide will be disposed of at the Waste Isolation Pilot Plant (WIPP). Currently 3013 containers are used to package the oxide, which are placed in to 9975 Type B shipping containers. The Oxide Packaging Technology Maturation Plan determined that a transition to the used of 2-qt SAVY containers placed in 9977 would increase efficiency in shipping and handling and increase programmatic flexibility. The 2-quart SAVY container meets DOE M 441.1 and TA-55 Documented Safety Analysis requirements for handling and storage of Pu oxide at LANL.

36 MATERIALS SCIENCE↗

Tools for Assessing Performance (TAP) Project: FY2023 Quarter 2 Report

LANL personnel presented TAP-sponsored work at the 103 rd Annual Meeting of the American Meteorological Society, which was held in Denver, CO in January 2023. There were four different presentations related to TAP-sponsored work that were given by LANL staff and studentsat this meeting: (1) Gloeckler, T., M. Nelson, H. Shah, M. Deshler, L. Wedell, R. Linn, N. Duboc, S. Pol, P. Bieringer, A. Annunzio, B. Martin, and H. Tinnesand, 2023. Testing Validity and Limitations of a Low-Order Diffusive Wake Model. 15 th Symposium on the Urban Environment, January 8-12, 2023, Denver, CO, U.S.A. (2) Nelson, M., H. Shah, T. Gloeckler, M. Deshler, L. Wedell, A. Ortega, R. Linn, N. Duboc, P. Conry, S. Pol, and H. Tinnesand, 2023. The Isolated Building Wake Experiment. Paper 1A.1. 24 th Symposium on Boundary Layers and Turbulence, January 8-12, 2023. Denver, CO, U.S.A. (3) Shah, H., M. Nelson, S. Pol, R. Linn, N. Duboc, and H. Tinnesand, 2023. Detailed Measurement of a Building Wake Under Real-World Atmospheric Conditions. Poster 102. 24 th Symposium on Boundary Layers and Turbulence, January 8-12, 2023, Denver, CO, U.S.A. (4) Wedell, L., M. Nelson, H. Shah, T. Gloeckler, M. Deshler, R. Linn, S. Pol, H. Tinnesand, 2023. The Isolated Building Wake Experiment: Using a Rotating Building to Mulitply the Number of Wake Measurement Locations without Moving the Instruments. Paper 1A.4A. 24 th Symposium on Boundary Layers and Turbulence, January 8-12, 2023, Denver, CO, U.S.A.

54 ENVIRONMENTAL SCIENCES↗

Tommy Morris’ Comments on Nuclear Explosive Safety

Nuclear explosives and weapon systems require special consideration because of their political and military importance, their destructive power, and the potential consequences of an accident. The special consideration translates into specific requirements promulgated by Department of Energy (DOE) O 452.1E “Nuclear Explosive and Weapon Surety,” and Department of Defense (DoD) Directive 3150.02 “DoD Nuclear Weapon System Safety Program.” The Los Alamos National Laboratory (LANL) W-Division Nuclear Explosive Safety Office mission is to coordinate LANL participation in Nuclear Explosive Safety Studies (NESS) and Nuclear Weapon System Safety Studies (NWSS); to provide qualified members and advisors to the studies; to liaise with the National Nuclear Security Administration (NNSA), the DoD, other national laboratories, the Nevada Test Site, and Pantex Plant with regards to nuclear explosive and weapon system safety. These orders and directives define nuclear detonation as an energy release through a nuclear process, during a period of time on the order of 1 microsecond, in an amount equivalent to the energy released by detonating 4 or more pounds of trinitrotoluene (TNT).

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Professional Development for Technical Managers [Slides] (Rev. 1)

LANL is changing rapidly and requires a leadership development program in order to support the growing and changing workforce. Provide analysis and recommendations for a leadership development program for engineering services within ALDFO: 1) Attrition and churn are up; 2) Younger workforce--loss of organizational knowledge; 3) LANL is geographically isolated; 4) Leadership training is infrequent and one-size-fits-all.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Deep Learning Model Segmentations on Computed Tomography 3D Reconstructions of Coffee Beans to Determine Void Ratio (U-Net) and Roast Level (LinkNet)

This project will evaluate the functionality of Object Research Dragonfly software’s user produced deep learning (DL) models on Computed Tomography (CT) scanned coffee beans from green (unroasted) through a dark roast. DL models will be expected to identify voids within the coffee beans, and identify the level of roast of the bean from the CT reconstruction. The scope of this project is intended to meet the Capstone Project requirements of University of California San Diego (UCSD) Structural Engineering master’s degree and offer useful insight on Dragonfly’s DL capability for LANL’s Non-Destructive Evaluation (NDE) CT team. The results of this project will be presented to the E-6 NDE group within LANL. Data acquisition was completed with a North Star Imaging (NSI) X-25 CT Cabinet.

97 MATHEMATICS AND COMPUTING↗

Investigation of the Role of the Role of Nuclear Physics in Heavy Element Nucleosynthesis, through the Study of Key Reactions, and the Improvement of Theoretical Reaction Rates (Final Report)

Neutrino-driven winds in core-collapse supernovae have been identified as a possible site for the production of elements heavier than iron. Traditionally, these neutrino-driven winds have been proposed as the site of the main r-process. Recent simulations fail to reproduce the conditions required for the main r-process. while they remain a promising site for producing the lightest elements beyond iron, e.g., Sr, Y, and Zr through the νp process. The efficiency of the νp process depends on the hydrodynamical conditions, the electron fraction (which is related to the neutrino properties), and the nuclear reactions on many short-lived nuclei with limited (if at all) experimental information. The reaction rates on these nuclei are based on theoretical predictions using the Hauser-Feshbach model. Recent sensitivity studies have highlighted the importance of neutron-induced reactions on these nuclei along the νp process path. This work aimed to experimentally constrain reaction rates that are known to play a key role in the neutrino-p process nucleosynthesis. A secondary subsequently-added objective was to start the implementation of techniques that improve the description of nuclear properties in the Hauser-Feshbach model by extending the microscopic nuclear level density description offered via the shell model to high excitation energies without using experiment-based renormalizations. The main objective of this work was the experimental constraint of the 56 Ni(n,p) 56 Co reaction rate via a measurement of the inverse reaction 56 Co(p,n) 56 Ni at the National Superconducting Cyclotron Laboratory (NSCL) and later the Facility for Rare Isotope Beams (FRIB). This reaction is considered the key one for determining the yields possible by the neutrino-p process. A technique for this type of measurement in inverse kinematics at low energies did not exist before this work. The work also had two secondary objectives. First, to contribute to efforts to measure the same reaction in direct kinematics using a radioactive target at Los Alamos National Laboratory (LANL), and second, to advance work to implement shell-model-deduced microscopic level densities in Hauser-Feshbach calculations. The project has resulted in the development of the first technique to perform (p,n) cross-section measurements in relevant-for-astrophysics low energies in inverse kinematics using a magnetic spectrometer or separator, and neutron detectors for neutron tagging. It has also resulted in the precise measurement of the cross-section of the 40 Ar(p,n) 40 K reaction in a proof-of-principle experiment realized by using a beam-line quadrupole of the ReA3 accelerator of NSCL/FRIB. As part of this project the technique was successfully adapted to make use of the superior acceptance of the Separator for Capture Reactions (SECAR) at FRIB. In this project, the required experimental setup simulations and beam optics were developed and tested with the measurement of the 58 Fe(p,n) 58 Cu reaction cross-section. Additionally, this project contributed with simulation work to the development of a technique to measure (n,p) reactions with radioactive targets at LANL, and which resulted in the measurement of the key 56 Ni(n,p) 56 Co reaction cross-section at neutron energies above ≈1 MeV. Last, the project initiated work in the development of shell model based level densities using the moments method.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

C-NR Sars-Cov-2 (Covid-19) Timeline

At the onset of the pandemic, then C-NR Group Leader, Felicia Taw, asked Roger A. Meade to compile a timeline of covid events. The following entries are announcements, statements, and email messages from the World Health Organization, the LANL homepage, LANL managers and by C Division manager and staff. Although the entries have been slightly edited and streamlined to enhance readability, they retain many of the original markings.

99 GENERAL AND MISCELLANEOUS↗

Water ingress testing of Pressure Cooker 1006027150 REVAB-021

The requirements of this water ingress test are defined in PA-RD-01009, TA-55 Criticality Safety Requirements. “The container design should be capable of preventing the entry of more than 50 ml water when subjected to water spray at a flow of up to 2 inches water per hour for 2 hours or when immersed in water up to a depth of 6 inches above the top of the container for the same period of time.” The six allen screw fasters on the lid of the container were torqued to approximately 45 inch-pounds with a calibrated torque wrench in a crisscross pattern to ensure equal force distribution. The container management team of ORI-2 has developed a standard practice of gathering 5 data points to increase the statistical confidence in the data. This method has been demonstrated in previous LA-URs and approved official memorandums as follows: LANL Memo, SPE-2: 19-016 dated August 22, 2019; LANL Memo, SPE-2:19-020 dated September 24, 2019; and LA-UR-19-28268, Water Ingress Testing of Commercially Available Containers for the TA-55 Criticality Safety Program.

42 ENGINEERING↗

Fission In R-process Elements (FIRE) (NA-22 Quarterly Report, Q4FY22)

The goal of the FIRE topical collaboration in nuclear theory was to determine the astrophysical conditions of the rapid neutron capture process (r-process), which is responsible for the formation of heavy elements. This was be achieved by including in r-process simulations the most advanced models of fission (spontaneous, neutron-induced, β-delayed) that have been developed at LLNL and LANL. The collaboration was composed of LLNL (lead) and LANL for fission work, BNL for nuclear data management, and the university of Notre Dame and North Carolina State University for r-process simulations. Under DOE/NNSA agreement, both universities received funds from DOE Office of Science, while national laboratories receive funds directly from NA221.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

On the flow-stress model of Preston, Tonks, and Wallace - Observations, parameter constraints, and implementations (Rev. 1)

A detailed discussion about the PTW flow-stress model has been presented, including theoretical considerations, model calibrations to experimental data, and model implementations in LANL ASC hydro-codes. The main findings are: In order to reproduce the intended behavior of the PTW model at high strain rates, the following conditions on the model parameters need to be valid: y 1 ≥ s 0 and y 2 ≥ β ; When the conditions above are not satisfied, PTW and PTW_Mod1 have slightly different behavior in the phonon-drag regime, and should be treated as different models. PTW exhibits a discontinuity above the critical strain rate. PTW_Mod1 does not show such a discontinuity but implies a different strain-rate dependence at high strain rates. Examples of this behavior include older calibrations for stainless steel and depleted uranium; In the thermal-activation regime, some flexibility was introduced in the original PTW model to allow for different rate-dependent behaviors at intermediate strain rates. Example: copper. However, many material calibrations do not require this extra flexibility, and the complexity and ambiguity of the intended behavior can be partially blamed for the inconsistent model implementations across ASC codes; The limit for the material constant p going to zero is well defined and leads to a simplified flow-stress equation, discontinuity free; Modern calibrations of the PTW parameters are done using Impala. Constraints on the PTW parameters are enforced; Implementation of the PTW model in LANL ASC hydro-codes suffered of several shortcom ings. At the time of writing, FLAG and xRAGE contain consistent and correct implemen tations of the PTW and PTW_Mod1 models. Corresponding changes to Pagosa have been suggested.

36 MATERIALS SCIENCE↗

Benchmarking the AirSquared All-Metal Scroll Pump Against the Normetex 15 - Preliminary report

Tritium operations require specialized equipment for material compatibility, safety, and waste considerations. Non-metallic pump materials (polymer, oil, or grease) on a tritium-wetted surface can absorb tritium and/or undergo isotope exchange between tritium and more common protium, creating tritiated compounds that can result in material property modification via beta-radiolysis, inventory loss, reduced performance and special waste considerations, all of which increase the operating cost for a facility. Vacuum pumps move gas via a pressure differential between volumes of an operation. Several types of all-metal vacuum pumps exist for this application including metal bellows, diaphragm and scroll pumps. A metal bellows pump incorporates only metal components at the wetted surfaces. The common metal bellows pump employed in tritium facilities, the MB601 (Senior Metal Bellows, Sharon, PA, USA) creates a gas-motive force with a vacuum pressure between 30-40 torr. These pumps can efficiently move gas from one process step to another, as long as sub-30 torr pressures are not required. However, for higher vacuum demand, an all-metal scroll pump can be used with the bellows pump serving as a “backing” pump. This configuration typically provides an achievable vacuum of less than 20 mTorr. All-metal scroll pumps are a technology uniquely applicable to tritium gas handling. The industry standard all-metal scroll pump for glovebox-scale tritium operations is the Normetex 15 m 3 /hr, typically referred to as the Normetex 15 (Normetex Pompes, Pont Audemer, France). However, the final Normetex pumps were manufactured in 2012, rendering them no longer available. Eumeca SaRL (formerly Normetex) has developed and is marketing a scroll pump based on the design of the Normetex 15. A US company, AirSquared (Broomfield, Colorado), has developed and is marketing a potential alternative to the Normetex 15. The Gas Transfer Systems group (Q-7) of the Los Alamos National Laboratory (LANL) procured serial number 0001 of the AirSquared All Metal Vacuum Scroll pump model number V16H034A-C01 in 2019. The LANL Hydrogen Processing Laboratory (HPL) has been evaluating the performance of the pump compared to a Normetex pump as a potential replacement in tritium and fusion facilities requiring this type of pump.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

β- and γ-Counting for Pre-detonation Nuclear Forensics on Eu-155

Post-detonation nuclear forensics was performed at Los Alamos National Laboratory (LANL) on 155Eu, a fission product on the wing of the fission product production curve whose yield is sensitive to fission fuel and neutron energy. With a half-life of 4.753 years, 155Eu provides a longer-lived option for these measurements than other fission products with similar mass numbers. The Chemistry Division Group - Nuclear and Radiochemistry, at LANL routinely measures a suite of fission products from 235U fissions in thermal neutron flux experiments known as thermal calibration exercises, using a mixture of gas proportional β-decay counting and γ-spectrometry on HPGe detectors. The fission products of interest are reported relative to a high-yield reference fission product from the same sample to create a running average ratio specific to neutron energy and fuel type; Equation 1 below shows the ratio-of-ratios R-value measured fission products are reported in: R i x = [A( i X)/A( 99 Mo)] unknown [A( i X)/A( 99 Mo)] 235 U n,th where A denotes activity, i X is the nuclide of interest, and 235 U n,th denotes irradiations of 235 U with thermal neutrons. Measurements of unknown fission spectra are ratioed to a running-average of thermal calibration results, and the resulting R-value can be referred to as against a library of irradiation conditions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Recent MCNP® Code Developments and Improvements for Nuclear Energy Applications [Slides]

The MCNP® code is a general-purpose radiation transport code developed at LANL over the past 46+ years. This code is capable of modeling the fundamental physics of particles as they move through and interact with materials. It is used in many LANL and worldwide radiation transport applications (see next slide) for example in the Fundamental nuclear physics and data experiments at LANSCE.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

MARSAME Radiological Release Report for Metal Items from Technical Area 53, Set 25

Environmental Protection and Compliance, Environmental Stewardship Group (EPC-ES) has evaluated the survey results for metal items from the Los Alamos Neutron Science Center (LANSCE) at Technical Area 53 (TA-53) and found that the metal items described in Table 1 of this report (identified by Radiation Protection [RP] Tracking Numbers) meet the criteria for unrestricted release under Department of Energy (DOE) Order 458.1 Chg 4, Radiation Protection of the Public and the Environment (DOE 2020) and can be recycled. This conclusion is based on the known history of the metal items and radiation survey data (see the completed RP-Form-031 LANSCE Metals Clearance Log [LANL 2021a] for each item in Attachment 1). None of the items in this report are located within radiological areas. Therefore, the items are considered unencumbered and are not subject to the moratorium suspension on metal recycling from DOE facilities. Additionally, Los Alamos National Laboratory (LANL) has determined that there is no practical opportunity for internal DOE reuse of this metal.

54 ENVIRONMENTAL SCIENCES↗