Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Integration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Detection of signals by weighted integrate-and-dump filter

A Weighted Integrate and Dump Filter (WIDF) is presented that results in reducing those losses in telemetry symbol signal to noise ratio (SNR) which occur in digital Integrate and Dump Filters (IDFs) when the samples are not phase locked to the input data symbol clock. The Minimum Mean Square Error (MMSE) criterion is used to derive a set of weights for approximating the analog integrate and dump filter, which is the matched filter for detection of signals in additive white Gaussian noise. This new digital matched filter results in considerable performance improvement compared to unweighted digital matched filters. An example is presented for a sampling rate of four times the symbol rate. As the sampling offset (or phase) varies with respect to the data symbol boundaries, the output SNR varies 1 dB for an unweighted IDF, but only 0.3 dB for the optimum WIDF, averaged over random data patterns. This improvement in performance relative to unweighted IDF means that significantly lower sampling and processing rates can be used for given telemetry symbol rates, resulting in reduced system cost.

Sadr, R.↗
NASA NTRS1987

Integrated control and display research for transition and vertical flight on the NASA V/STOL Research Aircraft (VSRA)

Results of a substantial body of ground-based simulation experiments indicate that a high degree of precision of operation for recovery aboard small ships in heavy seas and low visibility with acceptable levels of effort by the pilot can be achieved by integrating the aircraft flight and propulsion controls. The availability of digital fly-by-wire controls makes it feasible to implement an integrated control design to achieve and demonstrate in flight the operational benefits promised by the simulation experience. It remains to validate these systems concepts in flight to establish their value for advanced short takeoff vertical landing (STOVL) aircraft designs. This paper summarizes analytical studies and simulation experiments which provide a basis for the flight research program that will develop and validate critical technologies for advanced STOVL aircraft through the development and evaluation of advanced, integrated control and display concepts, and lays out the plan for the flight program that will be conducted on NASA's V/STOL Research Aircraft (VSRA).

Foster, John D.↗
NASA NTRS1987

Potential flow around two-dimensional airfoils using a singular integral method

The problem of potential flow around two-dimensional airfoils is solved by using a new singular integral method. The potential flow equations for incompressible potential flow are written in a singular integral equation. The equation is solved at N collocation points on the airfoil surface. A unique feature of this method is that the airfoil geometry is specified as an independent variable in the exact integral equation. Compared to other numerical methods, the present calculation procedure is much simpler and gives remarkable accuracy for many body shapes. An advantage of the present method is that it allows the inverse design calculation and the results are extremely accurate.

Nguyen, Yves↗
NASA NTRS1988

Velocity-pressure integrated versus penalty finite element methods for high Reynolds number flows

Velocity-pressure integrated and consistent penalty finite element computations of high Reynolds number, laminar flows are presented. In both of the methods, the pressure has been interpolated using linear shape functions for a triangular element. The triangular element is contained inside the bi-quadratic isoparametric element. It has been reported previously that the pressure interpolation method, when used in the velocity-pressure integrated method, yielded accurate computational results for high Reynolds number flows. It is shown that use of the same pressure interpolation method in the consistent penalty finite element method yielded accurate velocity and pressure fields which were comparable to those obtained using the velocity-pressure integrated method. Accuracy of the two finite element methods has been demonstrated by comparing the computational results with available experimental data and/or fine-grid finite difference computational results. Advantages and disadvantages of the two methods are discussed on the basis of accuracy and convergence nature. Example problems considered include a lid-driven cavity flow for Reynolds number of 10,000, a laminar backward-facing step flow, a laminar flow through a nest of cylinders, and a channel flow with an internal blockage. A finite element computer program (NSFLOW/P) for the 2-D, incompressible Navier-Stokes equations is also presented.

Kim, Sang-Wook↗
NASA NTRS1988

An integrated approach to the synthesis of geometrically non-linear structures

An integrated approach to the minimum weight design of geometrically nonlinear three-dimensional truss structures with geometric imperfections, subject to inequality constraints on static displacements, stresses, local buckling and cross sectional areas, is investigated. The integrated structural synthesis problem involves design and response quantities as independent variables and equilibrium equations, describing the finite element model, as equality constraints. The nonlinear structural analysis and the optimization are thus merged together into a single process. A computer program developed to compute the constraint values and analytical gradients is coupled with a generalized reduced gradient algorithm to solve the integrated problem. Numerical results for a geometrically nonlinear shallow dome example problem are presented for various types of imperfections. Furthermore, it is found that the algorithm is capable of detecting and guarding against system as well as element elastic instability using equilibrium information only, that is, without imposing system and local buckling inequality constraints.

Smaoui, H.↗
NASA NTRS1988

Integrated control and display research for transition and vertical flight on the NASA V/STOL Research Aircraft (VSRA)

Results of a substantial body of ground-based simulation experiments indicate that a high degree of precision of operation for recovery aboard small ships in heavy seas and low visibility with acceptable levels of effort by the pilot can be achieved by integrating the aircraft flight and propulsion controls. The availability of digital fly-by-wire controls makes it feasible to implement an integrated control design to achieve and demonstrate in flight the operational benefits promised by the simulation experience. It remains to validate these systems concepts in flight to establish their value for advanced short takeoff vertical landing (STOVL) aircraft designs. This paper summarizes analytical studies and simulation experiments which provide a basis for the flight research program that will develop and validate critical technologies for advanced STOVL aircraft through the development and evaluation of advanced, integrated control and display concepts, and lays out the plan for the flight program that will be conducted on NASA's V/STOL Research Aircraft (VSRA).

Foster, John D.↗
NASA NTRS1988

The surface integral approach to radarclinometry

A radar image of the Lake Champlain West quadrangle in the Adirondack Mountains of the U.S. is synthesized and used to test the surface integral approach to radarclinometry. It is shown that the surface integral approach to radarclinometry possesses an inherent instability that can be avoided only if the radar reflectance function possesses a shallow slope over the range of operation and if terrain slopes are bounded to prevent their being either parallel or perpendicular to the Poynting vector of the radar irradiance. It is found that the noise associated with real SAR systems makes this instability worse. It is concluded that the value of the surface integral approach to radarclinometry shows little promise.

Wildey, Robert L.↗
NASA NTRS1988

Computational human factors in human-machine engineering - The Army-NASA aircrew/aircraft integration (A3I) program

The A3I program is a joint US Army-NASA exploratory program to develop a rational predictive methodology for helicopter cockpit system design, including mission requirements and training-system implications, that integrates human factors engineering with other vehicle system design disciplines at an early stage in the development process. The program will produce a prototye human factors/computer-aided engineering (HF/CAE) workstation suite for use by design professionals. This interactive environment will include computational and expert systems for the analysis and estimation of the impact of cockpit design and mission specification on system performance by considering the performance consequences from the human component of the system, especially as an integral part of the overall system operation, and from the very beginning of the design process. The central issues of pilot workload, performance, and training needs, and appropriate uses of automation are interrelated to affect all integrated design considerations in future man-machine systems. The goal is to aid designers in understanding these complex interactions and in optimally matching human capabilities with advanced cockpit systems.

Hartzell, E. James↗
NASA NTRS1988

Acceleration ground test program to verify GAS payload No. 559 structure/support avionics and experiment structural integrity

Acceleration ground tests were conducted on the Get Away Special (GAS) payload 559 to verify the structural integrity of the structure/support avionics and two of the planned three flight experiments. The ITA (Integrated Test Area) Standardized Experiment Module (ISEM) structure was modified to accommodate the experiments for payload 559. The ISEM avionics consisted of a heavy duty sliver zinc power supply, three orthogonal-mounted low range microgravity accelerometers, a tri-axis high range accelerometer, a solid state recorder/programmer sequencer, and pressure and temperature sensors. The tests were conducted using the Gravitational Plant Physiology Laboratory Centrifuge of the University City Science Center in Philadelphia, PA. The launch-powered flight steady state acceleration profile of the shuttle was simulated from lift-off through jettison of the External Tank (3.0 g's). Additional tests were conducted at twice the nominal powered flight acceleration levels (6 g's) and an over-test condition of four times the powered flight loads to 12.6 g's. The present test program has demonstrated the value of conducting ground tests to verify GAS payload experiment integrity and operation before flying on the shuttle.

Cassanto, John M.↗
NASA NTRS1986

Software engineering environment tool set integration

Space Transportation System Division (STSD) Engineering has a program to promote excellence within the engineering function. This program resulted in a capital funded facility based on a VAX cluster called the Rockwell Operational Engineering System (ROSES). The second phase of a three phase plan to establish an integrated software engineering environment for ROSES is examined. It discusses briefly phase one which establishes the basic capability for a modern software development environment to include a tool set, training and standards. Phase two is a tool set integration. The tool set is primarily off-the-shelf tools acquired through vendors or government agencies (public domain). These tools were placed into categories of software development. These categories are: requirements, design, and construction support; verification and validation support; and software management support. The integration of the tool set is being performed through concept prototyping and development of tools specifically designed to support the life cycle and provide transition from one phase to the next.

Selfridge, William P.↗
NASA NTRS1989

The Environment for Application Software Integration and Execution (EASIE) version 1.0. Volume 1: Executive overview

The Environment for Application Software Integration and Execution (EASIE) provides a methodology and a set of software utility programs to ease the task of coordinating engineering design and analysis codes. EASIE was designed to meet the needs of conceptual design engineers that face the task of integrating many stand-alone engineering analysis programs. Using EASIE, programs are integrated through a relational database management system. Volume 1, Executive Overview, gives an overview of the functions provided by EASIE and describes their use. Three operational design systems based upon the EASIE software are briefly described.

Rowell, Lawrence F.↗
NASA NTRS1989

Optical detectors for GaAs MMIC integration: Technology assessment

Fiber optic links are being considered to transmit digital and analog signals in phased array antenna feed networks in space communications systems. The radiating elements in these arrays will be GaAs monolithic microwave integrated circuits (MMIC's) in numbers ranging from a few hundred to several thousand. If such optical interconnects are to be practical it appears essential that the associated components, including detectors, be monolithically integrated on the same chip as the microwave circuitry. The general issue of monolithic integration of microwave and optoelectronic components is addressed from the point of view of fabrication technology and compatibility. Particular attention is given to the fabrication technology of various types of GaAs optical detectors that are designed to operate at a wavelength of 830 nm.

Claspy, P. C.↗
NASA NTRS1989

The 4D-TECS integration for NASA TSRV airplane

The integration of the Total Energy Control System (TECS) concept with 4D navigation is described. This integration was made to increase the operational capacity of modern aircraft and encourage incorporation of this increased capability with the evolving National Airspace System (NAS). Described herein is: 4D smoothing, the basic concepts of TECS, the spoiler integration concept, an algorithm for nulling out time error, speed and altitude profile modes, manual spoiler implementation, 4D logic, and the results of linear and nonlinear analysis.

Kaminer, I.↗
NASA NTRS1989

Space station ECLSS simplified integrated test

A discussion of the Space Station Simplified Integrated Test (SIT) was conducted. The first in a series of three integrated Environmental Control and Life Support (ECLS) system tests, the primary objectives of the SIT were to verify proper operation of ECLS subsystems functioning in an integrated fashion as well as to gather preliminary performance data for the partial ECLS system used in the test. A description of the SIT configuration, a summary of events, a discussion of anomalies that occurred during the test, and detailed results and analysis from individual measurements and water and gas samples taken during the test are included. The preprototype ECLS hardware used in the test is reported providing an overall process description and theory of operation for each hardware item.

Schunk, Richard G.↗
NASA NTRS1989

Numerical integration of asymptotic solutions of ordinary differential equations

Classical asymptotic analysis of ordinary differential equations derives approximate solutions that are numerically stable. However, the analysis also leads to tedious expansions in powers of the relevant parameter for a particular problem. The expansions are replaced with integrals that can be evaluated by numerical integration. The resulting numerical solutions retain the linear independence that is the main advantage of asymptotic solutions. Examples, including the Falkner-Skan equation from laminar boundary layer theory, illustrate the method of asymptotic analysis with numerical integration.

Thurston, Gaylen A.↗
NASA NTRS1989

Overview of Dynamics Integration Research (DIR) program at Langley Research Center

Research goals and objectives for an ongoing activity at Langley Research Center (LaRC) are described. The activity is aimed principally at dynamics optimization for aircraft. The effort involves active participation by the Flight Systems, Structures, and Electronics directorates at LaRC. The Functional Integration Technology (FIT) team has been pursuing related goals since 1985. A prime goal has been the integration and optimization of vehicle dynamics through collaboration at the basic principles or equation level. Some significant technical progress has been accomplished since then and is reflected here. An augmentation for this activity, Dynamics Integration Research (DIR), has been proposed to NASA Headquarters and is being considered for funding in FY 1990 or FY 1991.

Sliwa, Steven M.↗
NASA NTRS1989

An analytical sensitivity method for use in integrated aeroservoelastic aircraft design

Interdisciplinary analysis capabilities have been developed for aeroservoelastic aircraft and large flexible spacecraft, but the requisite integrated design methods are only beginning to be developed. One integrated design method which has received attention is based on hierarchal problem decompositions, optimization, and design sensitivity analyses. This paper highlights a design sensitivity analysis method for Linear Quadratic Gaussian (LQG) optimal control laws, enabling the use of LQG techniques in the hierarchal design methodology. The LQG sensitivity analysis method calculates the change in the optimal control law and resulting controlled system responses due to changes in fixed design integration parameters using analytical sensitivity equations. Numerical results of a LQG design sensitivity analysis for a realistic aeroservoelastic aircraft example are presented. In this example, the sensitivity of the optimal control law and aircraft response for various parameters such as wing bending natural frequency is determined. The sensitivity results computed from the analytical expressions are used to estimate changes in response resulting from changes in the parameters. Comparisons of the estimates with exact calculated responses show they are reasonably accurate for + or - 15 percent changes in the parameters. Evaluation of the analytical expressions is computationally faster than equivalent finite difference calculations.

Gilbert, Michael G.↗
NASA NTRS1987

Space station operations task force. Panel 4 report: Management integration

The Management Integration Panel of the Space Station Operations Task Force was chartered to provide a structure and ground rules for integrating the efforts of the other three panels and to address a number of cross cutting issues that affect all areas of space station operations. Issues addressed include operations concept implementation, alternatives development and integration process, strategic policy issues and options, and program management emphasis areas.

Source record↗