The isothermal oxidation of high-purity aluminum foil at high temperature :
Abstract not provided.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Abstract not provided.
Explore the source record for details and available documents.
A gas compressor system includes a compression liquid holding tank in fluid communication with a combustion tank. A combustible fluid is directed to the combustion tank. An ignition system is provided for igniting the combustible fluid. A compression liquid flows between the liquid holding tank, the combustion tank, and a compression tank. A compressible gas is provided in the compression tank. The ignition of the combustible fluid drives the compression liquid from the combustion tank to the compression tank, compressing the compressible liquid. An HVAC&R system and a method of compressing gas are also disclosed.
Measurements of sorption isotherms and transport properties of carbon dioxide (CO{sub 2}) in coal cores are important for designing enhanced coalbed-methane/CO{sub 2}-sequestration field projects. Many of the coals will be deep and under considerable lithostatic and hydrostatic pressures. These lithostatic pressures may reduce the sorption capacities and/or transport rates significantly. Consequently, we have studied apparent sorption and diffusion in a coal core under confining pressure. A core from the important bituminous coal Pittsburgh no. 8 was kept under a constant, 3D effective stress; the sample was scanned by X-ray computer tomography (CT) before, then while, it sorbed CO{sub 2}. Increases in sample density because of sorption were calculated from the CT images. Moreover, density distributions for small volume elements inside the core were calculated and analyzed. Qualitatively, the CT showed that gas sorption advanced at different rates in different regions of the core and that diffusion and sorption progressed slowly. The amounts of CO{sub 2} sorbed were plotted vs. position (at fixed times) and vs. time (for various locations in the sample). The resulting sorption isotherms were compared to isotherms obtained from powdered coal from the same Pittsburgh no. 8 extended sample. The results showed that for this single coal at specified times, the apparent sorption isotherms were dependent on position of the volume element in the core and the distance from the CO{sub 2} source. Also, the calculated isotherms showed that less CO{sub 2} was sorbed than by a powdered (and unconfined) sample of the coal. Changes in density distributions during the experiment were also observed. After desorption, the density distribution of calculated volume elements differed from the initial distribution, suggesting hysteresis and a possible rearrangement of coal structure because of CO{sub 2} sorption.
The current strategy for removal of cesium from the Hanford waste stream is ion-exchange using spherical Resorcinol-Formaldehyde (sRF) resin. The original resin of choice was granular SuperLig 644 resin and during testing of this resin several operational issues were identified. For example, the granular material had a high angle of internal friction resulting in fragmentation of resin particles along its edges during cycling and adverse hydraulic performance. Efforts to replace SuperLig 644 were undertaken and one candidate was the granular Resorcinol-Formaldehyde (RF) resin where experience with this cation exchanger dates back to the late 1940's. To minimize hydraulic concerns a spherical version of RF was developed and several different chemically produced batches were created. The 5E-370/641 batch of sRF was selected and for the last decade numerous studies have been performed (e.g., batch contact tests, column loading and elution tests). The Waste Treatment Plant (WTP) flowsheet shows that the aqueous phase waste stream will have a wide range of ionic concentrations (e.g., during the loading step 0-3 M free OH, 5+ M Na, 0-1 M K, 0-3 M NO{sub 3}). Several steps are required in the ion-exchange process to achieve the required Cs separation factors: loading, displacement, washing, elution, and regeneration. The sRF resin will be operated over a wide range in pH (i.e., pH of 12-14 during the loading step and pH of 0.01-1 during the elution step). During some of these steps very high levels of counter-ions and co-ions will be present within the aqueous phase. Alternative process feeds are under consideration as well (e.g., sodium levels as high as 8 M and column operation up to 45 C during loading, reduced and recycled HNO{sub 3} during elution). In order to model the performance of sRF resin through an entire ion-exchange cycle, a more robust isotherm model is required. To achieve this more robust isotherm model requires knowledge of the numbers and kinds of fixed ionogenic groups that make up sRF. Recent literature reviews and scoping titration tests strongly indicate that sRF is a polyfunctional cation exchange resin with at least three dominant types of ring groups playing a role in its isotherm behavior over the wide pH range of operations. Also three types of fixed ionogenic acid groups are present: sulfonic (SO{sub 3}H{sup -}) groups; carboxylic (COOH{sup -}) groups, and resorcylic (OH{sup -}) groups. It is this premise that we are working under in the development of a robust isotherm model for sRF over its entire planned pH operating range. The application of prototypic isotherms for modeling ion-exchange column behavior is demonstrated in Section 3 of this report. This preliminary work served to focus the development effort on the use of a mass-action based isotherm. In Section 4 of this report, the foundational material required to develop a robust isotherm model for sRF is provided. The paths taken, and choices made, are given for the reader to better understand our current status with respect to this goal and to highlight our most recent understanding of sRF exchange equilibria. Our ultimate goal is to update the CERMOD code (Aleman and Hamm, 2007) with a robust isotherm model for sRF that spans the entire pH and concentration ranges of planned operations. The isotherm model will then be used in the VERSE-LC code to model an entire ion-exchange cycle.
Highlights: • Semi-solid isothermal treatment of wrought superalloy (SSITWS). • Near-globular microstructure. • Carbide precipitates. - Abstract: Study on semi-solid processing of superalloy is little reported due to the difficulties in fabricating semi-solid billets. In this manuscript, a novel method called semi-solid isothermal treatment of wrought superalloy (SSITWS) was firstly proposed in order to fabricate semi-solid billets of superalloy. The effects of isothermal temperature and soaking time on microstructure of Ni-based superalloy GH4037 in the semi-solid state were investigated. The results show that the near-globular microstructure of wrought GH4037 superalloy can be obtained by the semi-solid isothermal treatment. The average grain size increased and the roundness decreased with the prolonged soaking time at 1350 °C and 1360 °C. When the isothermal temperature was elevated to 1370 °C or 1380 °C, the microstructure evolution was complex due to the combination of breaking up mechanism and coarsening mechanism. At 1390 °C, the dendritic grains were obviously observed in the microstructure. With the increasing of isothermal temperature and soaking time, the liquid boundary film coarsening behavior occurred in the microstructure. With the increasing of soaking time, the size of intragranular liquid droplets increased, but the amount of them decreased. When the isothermal temperature was high, the intragranular liquid droplets disappeared. The coarsening rate constant at 1360 °C was lower compared to that at 1350 °C. However, when the isothermal temperature was higher than 1370 °C, the coarsening kinetics was not suitable for describing the microstructure evolution. The discrete carbide precipitates appeared in the grain boundaries. The distribution of Ti and Mo were higher in the grain boundaries than that in solid grains, and the distribution of other elements was homogenous in the grain boundaries and inside the grains.
Using powder X-ray diffraction in conjunction with a diamond anvil cell (DAC), the unit cell volume of triamino-trinitrobenzene (TATB) has been measured from ambient pressure to 13 GPa. The resultant isotherm is compared with previous theoretical (Byrd and Rice and Pastine and Bernecker) and experimental (Olinger and Cady) works. While all reports are consistent to approximately 2 GPa, our measurements reveal a slightly stiffer TATB material than reported by Olinger and Cady and an intermediate compressibility compared with the isotherms predicted by the two theoretical works. Analysis of the room temperature isotherm using the semi-empirical, Murnaghan, Birch-Murnaghan, and Vinet equations of state (EOS) provided a determination of the isothermal bulk modulus (K{sub 0}) and its pressure-derivative (K{sub 0}') for TATB. From these fits to our P-V isotherm, from ambient pressure to 8 GPa, the average results for the zero-pressure bulk modulus and its pressure derivative were found to be 14.7 GPa and 10.1, respectively. For comparison to shock experiments on pressed TATB powder and its plastic-bonded formulation PBX 9502 (95% TATB, 5% Kel-F 800), the isotherm was transformed to the pseudo-velocity U{sub s}-u{sub p} plane using the Rankine-Hugoniot jump conditions. This analysis provides an extrapolated bulk sound speed, c{sub 0}=1.70 km s{sup -1}, for TATB and its agreement with a previous determination (c{sub 0}=1.43 km s{sup -1}) is discussed. Furthermore, our P-V and corresponding U{sub s}-u{sub p} curves reveal a subtle cusp at approximately 8 GPa. This cusp is discussed in relation to similar observations made for the aromatic hydrocarbons anthracene, benzene and toluene, graphite, and trinitrotoluene (TNT).
The project has made progress toward developing a comprehensive modeling capability for the capture of target species in off gas evolved during the reprocessing of nuclear fuel. The effort has integrated experimentation, model development, and computer code development for adsorption and absorption processes. For adsorption, a modeling library has been initiated to include (a) equilibrium models for uptake of off-gas components by adsorbents, (b) mass transfer models to describe mass transfer to a particle, diffusion through the pores of the particle and adsorption on the active sites of the particle, and (c) interconnection of these models to fixed bed adsorption modeling which includes advection through the bed. For single-component equilibria, a Generalized Statistical Thermodynamic Adsorption (GSTA) code was developed to represent experimental data from a broad range of isotherm types; this is equivalent to a Langmuir isotherm in the two-parameter case, and was demonstrated for Kr on INL-engineered sorbent HZ PAN, water sorption on molecular sieve A sorbent material (MS3A), and Kr and Xe capture on metal-organic framework (MOF) materials. The GSTA isotherm was extended to multicomponent systems through application of a modified spreading pressure surface activity model and generalized predictive adsorbed solution theory; the result is the capability to estimate multicomponent adsorption equilibria from single-component isotherms. This advance, which enhances the capability to simulate systems related to off-gas treatment, has been demonstrated for a range of real-gas systems in the literature and is ready for testing with data currently being collected for multicomponent systems of interest, including iodine and water on MS3A. A diffusion kinetic model for sorbent pellets involving pore and surface diffusion as well as external mass transfer has been established, and a methodology was developed for determining unknown diffusivity parameters from transient uptake data. Two parallel approaches have been explored for integrating the kernels described above into a mass-transport model for adsorption in fixed beds. In one, the GSTA isotherm kernel has been incorporated into the MOOSE framework; in the other approach, a focused finite-difference framework and PDE kernels have been developed. Issues, including oscillatory behavior in MOOSE solutions to advection-diffusion problems, and opportunities have been identified for each approach, and a path forward has been identified toward developing a stronger modeling platform. Experimental systems were established for collection of microscopic kinetics and equilibria data for single and multicomponent uptake of gaseous species on solid sorbents. The systems, which can operate at ambient temperature to 250°C and dew points from -69 to 17°C, are useful for collecting data needed for modeling performance of sorbents of interest. Experiments were conducted to determine applicable models and parameters for isotherms and mass transfer for water and/or iodine adsorption on MS3A. Validation experiments were also conducted for water adsorption on fixed beds of MS3A. For absorption, work involved modeling with supportive experimentation. A dynamic model was developed to simulate CO 2 absorption with chemical reaction using high alkaline content water solutions. A computer code was developed to implement the model based upon transient mass and energy balances. Experiments were conducted in a laboratory-scale column to determine model parameters. The influence of geometric parameters and operating variables on CO 2 absorption was studied over a wide range of conditions. This project has resulted in 7 publications, with 3 manuscripts in preparation. Also, 15 presentations were given at national meetings of ANS and AIChE and at Material Recovery and Waste Forms Campaign Working Group meetings.
The results obtained in the present study demonstrate the effects of various types of heat treatment processes on the microstructure and hardness of new trip-assisted carbide-free bainitic steel. The steel was subjected to three variants of heat treatment processing with an isothermal bainitic transformation temperature in a range from 350 to 480 °C. Changes of temperature and time of isothermal holding caused changes in the values of retained austenite (RA) volume fraction and carbon content. Reduction in the isothermal holding temperature resulted in the increased concentration of carbon in austenite. Also, the investigations of the microstructure showed that size and morphology of the austenite evolved during heat treatment. The SEM observations revealed that the steel subjected to heat treatment is composed of the carbide-free bainite with ferrite plates and a high volume fraction of retained austenite in the form of thin layers or islands. With the lower isothermal holding temperature and the higher degree of bainitic transformation, the more the RA morphology changed from island to layer type. The application of the lowest isothermal temperature resulted in a significant refinement of the microstructure components: the bainitic ferrite plates and the RA layers. Also, the mechanical properties obtained from the tensile testing and hardness measurements were correlated to the microstructure of the investigated steel after different isothermal holdings.
Black shale source rocks have become a key natural gas resource in the US and China. Unlike in conventional hydrocarbon reservoirs, a significant fraction of the gas in shales is adsorbed onto the inordinate specific surface areas (SSA) of micropores inside organic matter with densities exceeding those of bulk gas by an order of magnitude. Yet, the distribution of adsorbed versus bulk gas remains poorly understood. Experiments measure excess adsorption isotherms, which are corrected to absolute adsorption amounts by a factor that involves the density, ρ abs , of the adsorption layer(s). Constant values of ρ abs are widely used in the literature but, we argue, are inconsistent with the pressure- and temperature-dependence of adsorption behavior. In this work, we propose a more reliable approach that assumes a constant volume of each adsorption layer that can be determined from the SSA of the substrate. We measure nine high-pressure methane excess adsorption isotherms up to 15 MPa for three shale samples from China and Germany at temperatures of 65, 75, and 95 °C, and low-pressure carbon dioxide and nitrogen isotherms to estimate the SSA. We also investigate another 24 isotherms at 35, 50, and 60° C or 8 Chinese shale samples and 3 isotherms at 60, 90, and 120° C for an Argentinian shale sample from the literature. A new variation of the multi-layer Ono-Kondo lattice model is introduced to derive the temperature and pressure dependent adsorption layer densities, which are subsequently used to obtain the absolute adsorption isotherms of interest. Finally, this practical methodology has the potential to significantly improve our estimates of shale gas-in-place resources, and adsorption modeling more broadly.
Highlights: • The oxidation kinetics of commercially titanium alloys has been extensively investigated following isothermal treatments. • Components in aerospace applications are subjected to temperature gradients which can modify the oxidation kinetics of Ti-6242. • The main goal of the present research is to study the formation of the oxide scale and the alpha case layer under cyclic thermal treatments • Results are with those achieved by isothermal treatments. - Abstract: Ti-6Al-2Sn-4Zr-2Mo is one of the most common titanium alloys for aerospace industry. This alloy experiences oxidation phenomenon at elevated temperatures. In the present study, cyclic thermal treatments were performed in air at 500, 593 and 700 °C, up to 500 cycles, in order to determine the oxidation kinetics and to analyze the oxide scale and alpha-case formation. Moreover, results were compared to those achieved under isothermal conditions to elucidate differences between both thermal conditions. In this sense, metallographic techniques and X-ray diffraction, together with a detailed advanced characterization of the microstructure by Field Emission Scanning Electron Microscopy and Focus Ions Beam, were used to analyze surface oxidation evolution. Results pointed out that cyclic treatments induced a strong increase of the weight gain compared to isothermal treatments. The analysis of the oxide scale revealed the formation of not only rutile, as isothermal treatments, but also anatase. Thickness of the oxide scale was higher for cyclic conditions, while alpha case did not exceed values reached by isothermal treatments and even became lower at 500 °C.
Explore the source record for details and available documents.
The historical development of the Carnot cycle necessitated the construction of isothermal and adiabatic pathways within the cycle that were also mechanically 'reversible' which lead eventually to the Kelvin-Clausius development of the entropy function S where for any reversible closed path C, ∮{sub C} dS = 0 based on an infinite number of concatenated Carnot engines that approximated the said path and where for each engine ΔQ{sub 1}/T{sub 1}+ΔQ{sub 2}/T{sub 2} = 0 where the Q's and T's are the heat absorption increments and temperature respectively with the subscripts indicating the isothermal paths (1;2) where for the Carnot engine, the heat absorption is for the diathermal (isothermal) paths of the cycle only. Since 'heat' has been defined as that form of energy that is transferred as a result of a temperature difference and a corollary of the Clausius statement of the Second law is that it is impossible for heat to be transferred from a cold to a hot reservoir with no other effect on the environment, these statements suggested that the local mode of transfer of 'heat' in the isothermal segments of the pathway does imply a Fourier heat conduction mechanism (to conform to the definition of 'heat') albeit of a 'reversible' kind, but on the other hand, the Fourier mechanism is apparently irreversible, leading to an increase in entropy of the combined reservoirs at either end of the material involved in the conveyance of the heat energy. These and several other considerations lead Benofy and Quay (BQ) to postulate the Fourier heat conduction phenomenon to be an ancillary principle in thermodynamics, with this principle being strictly local in nature, where the global Second law statements could not be applied to this local process. Here we present equations that model heat conduction as a thermodynamically reversible but mechanically irreversible process where due to the belief in mechanical time reversible symmetry, thermodynamical reversibility has been unfortunately linked to mechanical reversibility, that has discouraged such an association. The modeling is based on an application of a 'recoverable transition', defined and developed earlier on ideas derived from thermal desorption of particles from a surface where the Fourier heat conduction process is approximated as a series of such desorption processes. We recall that the original Carnot engine required both adiabatic and isothermal steps to complete the zero entropy cycle, and this construct lead to the consequent deduction that any Second law statement that refers to heat-work conversion processes are only globally relevant. Here, on the other hand, we examine Fourier heat conduction from MD simulation and model this process as a zero-entropy forward scattering process relative to each of the atoms in the lattice chain being treated as a system where the Carnot cycle can be applied individually. The equations developed predicts the 'work' done to be equal to the energy transfer rate. The MD simulations conducted shows excellent agreement with the theory. Such views and results as these, if developed to a successful conclusion could imply that the Carnot cycle be viewed as describing a local process of energy-work conversion and that irreversible local processes might be brought within the scope of this cycle, implying a unified treatment of thermodynamically (i) irreversible, (ii) reversible, (iii) isothermal and (iv) adiabatic processes.
Ambipolar diffusion (AD) is important in redistributing magnetic flux and in damping Alfven waves in molecular clouds. The importance of AD on a length scale l is governed by the AD Reynolds number, R {sub AD} = l/l{sub AD}, where l{sub AD} is the characteristic length scale for AD. The logarithmic mean of the AD Reynolds number in a sample of 15 molecular clumps with measured magnetic fields is 17, comparable to the theoretically expected value. We identify several regimes of AD in a turbulent medium, depending on the ratio of the flow time to collision times between ions and neutrals; the clumps observed by Crutcher in 1999 are all in the standard regime of AD, in which the neutrals and ions are coupled over a flow time. We have carried out two-fluid simulations of AD in isothermal, turbulent boxes for a range of values of R {sub AD}. The mean Mach numbers were fixed at M=3 and M{sub A}=0.67; self-gravity was not included. We study the properties of overdensities-i.e., clumps-in the simulation and show that the slope of the higher-mass portion of the clump mass spectrum increases as R {sub AD} decreases, which is qualitatively consistent with Padoan et al.'s finding that the mass spectrum in hydrodynamic turbulence is significantly steeper than in ideal MHD turbulence. For a value of R {sub AD} similar to the observed value, we find a slope that is consistent with that of the high-mass end of the initial mass function (IMF) for stars. However, the value we find for the spectral index in our ideal MHD simulation differs from theirs, presumably because our simulations have different initial conditions. This suggests that the mass spectrum of the clumps in the Padoan et al. turbulent fragmentation model for the IMF depends on the environment, which would conflict with evidence for a universal IMF. In addition, we give a general discussion of how the results of simulations of magnetized, turbulent, isothermal boxes can be scaled to physical systems. Each physical process that is introduced into the simulation, such as AD, introduces a dimensionless parameter, such as R {sub AD}, which must be fixed for the simulation, thereby reducing the number of scaling parameters by one. We show that the importance of self-gravity is fixed in any simulation of AD; it is not possible to carry out a simulation in which self-gravity and AD are varied independently unless the ionization is a free parameter. We show that our simulations apply to small regions in molecular clouds, generally with l{sub 0} {approx}< 0.4 pc and M {approx}< 25 M {sub sun}. A general discussion of the scaling relations for magnetized, isothermal, turbulent boxes, including self-gravitating systems, is given in the appendix.
Tritium Aging of Regenerated LANA.75 is a multi-year project. Activities include: tritium aging of a LANA.75 sample regenerated in 2018, regenerating a second tritium-aged LANA.75 sample, and verifying the thermal stability of LANA.75 under regeneration conditions. During FY19, the Task Technical Plan (TTP) addendum providing testing guidance for monitoring tritium aging of the regenerated LANA.75 sample was approved. A desorption isotherm at 150 °C was collected on the regenerated LANA.75 sample. A second desorption isotherm at 150 °C is scheduled to be collected along with additional desorption isotherms at 80 and 120 °C. Fabrication, pressure testing, and leak testing of the high temperature test cell for regeneration of the second tritium-aged LANA.75 sample was completed. Selection of the second LANA.75 sample to be regenerated is anticipated in FY20. Thermal stability testing of LANA.75 material was completed. Hydrogen desorption isotherms at 80, 100 and 120 °C were collected prior to and after a lengthy annealing process (200 hours combined over two weeks) at 750 °C. The isotherms showed similar performances for all temperatures. However, the plateau region for the isotherms after the annealing process were flatter, suggesting that the annealing process was beneficial to the hydride. Sample analyses, including XRD, SEM, ICP and particle size distribution, are ongoing.
We have expanded upon earlier work that investigates the relative importance of coronal loops with isothermal versus multithermal cross-field temperature distributions. These results are important for determining if loops have substructure in the form of unresolved magnetic strands. We have increased the number of loops targeted for temperature analysis from 19 to 207 with the addition of 188 new loops from multiple regions. We selected all loop segments visible in the 171 Å images of the Atmospheric Imaging Assembly (AIA) that had a clean background. Eighty-six of the new loops were rejected because they could not be reliably separated from the background in other AIA filters. Sixty-one loops required multithermal models to reproduce the observations. Twenty-eight loops were effectively isothermal, that is, the plasma emission to which AIA is sensitive could not be distinguished from isothermal emission, within uncertainties. Ten loops were isothermal. Also, part of our inventory was one small flaring loop, one very cool loop whose temperature distribution could not be constrained by the AIA data, and one loop with inconclusive results. Our survey can confirm an unexpected result from the pilot study: we found no isothermal loop segments where we could properly use the 171-to-193 ratio method, which would be similar to the analysis done for many loops observed with TRACE and EIT. We recommend caution to observers who assume the loop plasma is isothermal, and hope that these results will influence the direction of coronal heating models and the effort modelers spend on various heating scenarios.
Signal estimates for direct axion dark matter (DM) searches have used the isothermal sphere halo model for the last several decades. While insightful, the isothermal model does not capture effects from a halo’s infall history nor the influence of baryonic matter, which has been shown to significantly influence a halo’s inner structure. The high resolution of cavity axion detectors can make use of modern cosmological structure-formation simulations, which begin from realistic initial conditions, incorporate a wide range of baryonic physics, and are capable of resolving detailed structure. This work uses a state-of-the-art cosmological N -body+Smoothed-Particle Hydrodynamics simulation to develop an improved signal model for axion cavity searches. Signal shapes from a class of galaxies encompassing the Milky Way are found to depart significantly from the isothermal sphere. A new signal model for axion detectors is proposed and projected sensitivity bounds on the Axion DM eXperiment (ADMX) data are presented.
The durability of polymer matrix composites exposed to harsh environments is a major concern. Surface degradation and damage are observed in polyimide composites used in air at 125 to 300 C. It is believed that diffusion of oxygen into the material and oxidative chemical reactions in the matrix are responsible. Previous work has characterized and modeled diffusion behavior, and thermogravimetric analyses (TGAs) have been carried out in nitrogen, air, and oxygen to provide quantitative information on thermal and oxidative reactions. However, the model developed using these data was not able to capture behavior seen in isothermal tests, especially those of long duration. A test program that focuses on lower temperatures and makes use of isothermal tests was undertaken to achieve a better understanding of the degradation reactions under use conditions. A new low-cost technique was developed to collect chemical degradation data for isothermal tests lasting over 200 hr in the temperature range 125 to 300 C. Results indicate complex behavior not captured by the previous TGA tests, including the presence of weight-adding reactions. Weight gain reactions dominated in the 125 to 225 C temperature range, while weight loss reactions dominated beyond 225 C. The data obtained from isothermal tests was used to develop a new model of the material behavior. This model was able to fully capture the behavior seen in the tests up to 275 C. Correlation of the current model with both isothermal data at 300 C and high rate TGA test data is mediocre. At 300 C and above, the reaction mechanisms appear to change. Attempts (which failed) to measure non-oxidative degradation indicate that oxidative reactions dominate the degradation at low temperatures. Based on this work, long term isothermal testing in an oxidative atmosphere is recommended for studying the degradation behavior of this class of materials.