Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERPRETATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Magnetic hysteresis classification of the lunar surface and the interpretation of permanent remanence in lunar surface samples

A magnetic hysteresis classification of the lunar surface is presented. It was found that there is a distinct correlation between natural remanence (NRM), saturation magnetization, and the hysteresis ratios for the rock samples. The hysteresis classification is able to explain some aspects of time dependent magnetization in the lunar samples and relates the initial susceptibility to NRM, viscous remanence, and to other aspects of magnetization in lunar samples. It is also considered that since up to 60% of the iron in the lunar soil may be super paramagnetic at 400 K, and only 10% at 100 K, the 50% which becomes ferromagnetic over the cycle has the characteristics of thermoremanence and may provide for an enhancement in measurable field on the dark side during a subsatellite magnetometer circuit.

Wasilewski, P.↗
NASA NTRS1973

Identification and interpretation of tectonic features from ERTS-1 imagery

The author has identified the following significant results. The spatial relation of mercury deposits and faults in California coast ranges suggests regional structural control whereby the transverse faults and associated zones of weakness provided easy conduits for the ascent of hydrothermal solutions and emplacement of mercury ore. If proved valid, this relation identifies transverse fault zones as favorable structural guides for mercury exploration.

Abdel-Gawad, M.↗
NASA NTRS1973

A proposed experimental method for interpreting Doppler effect measurements and determining their precision

The principal problem in the measurement of the Doppler reactivity effect is separating it from the thermal reactivity effects of the expansion of the heated sample. It is shown in this proposal that the thermal effects of sample expansion can be experimentally determined by making additional measurements with porous samples having the same mass and/or volume as the primary sample. By combining these results with independent measurements of the linear temperature coefficient and the computed temperature dependence of the Doppler coefficient the magnitude of the Doppler coefficient may be extracted from the data. These addiational measurements are also useful to experimentally determine the precision of the reactivity oscillator technique used to measure the reactivity effects of the heated sample.

Klann, P. G.↗
NASA NTRS1972

Cayley formation interpreted as basin ejecta, part B

Improved information on the morphology and distribution of the Cayley Formation, provided by Apollo 16 orbital photography, leads to a concept in which the Cayley Formation was deposited as fluidized debris that traveled beyond the presently recognizable extent of the Imbrium Basin ejecta. By this hypothesis, each basin-forming event produced thick plains deposits in a belt peripheral to the continuous ejecta blanket and may have deposited a thinner layer in pools over the entire moon. Thus, each patch of terra plains is likely to be underlain by a sequence of fluidized ejecta deposits, which were derived from most or all multi-ring basins younger than the occupied depression. If the light color of the plains results from a high feldspar content of the excavated crustal rocks, an explanation of the absence of exposed pre-Cayley mare rocks may be that they are buried or dusted over.

Eggleton, R. E.↗
NASA NTRS1973

Man made culture interpretation and culture revision of small scale maps

The author has identified the following significant results. A major interstate highway added to the Wilmington, Del., quadrangle by another revision method was determined by the ERTS-1 data to have been misplotted from its true position. In addition to the experiment, where ERTS-1 data is available and small-scale revision is in progress, the ERTS-1 data is routinely being used to make additions and deletions of hydrographic features.

Kosco, W. J.↗
NASA NTRS1973

An interpretation of a geologic map of Fannin County, Texas, prepared by ADP techniques from ERTS MSS data

Multispectral scanner data, collected by ERTS-1 from an area in northeast Texas underlain by structurally simple cretaceous sedimentary rocks, were analyzed using several automatic data processing techniques. Training areas for the computer analysis were selected in three ways using: (1) an unsupervised classifier, (2) the unsupervised classifier to further refine training areas, and (3) available ground information. The first two methods utilize the capability of the unsupervised classifier to the unsupervised classifier to group resolution elements with similar spectral properties. With the imagery produced by these procedures, several geologic features can be identified. The most easily recognizable features are streams and other water bodies. The approximate location of contacts between several rock units can be mapped.

Henderson, J. A., Jr.↗
NASA NTRS1973

Interpretation and automatic image enhancement facility

The author has identified the following significant results. Efforts to provide data processing support for ERTS-1 investigators in Kansas are summarized. Programs have been developed for data retrieval, feature extraction, and classification of digital MSS data. The IDECS/PDP-15 facility at the University of Kansas Remote Sensing Laboratory has been used for quick look analysis of ERTS-1 imagery. Programs have been developed for studying fresh water bodies in ERTS-1 imagery over Kansas on the IDECS.

Haralick, R. M.↗
NASA NTRS1973

Structural interpretations based on ERTS-1 imagery, Bighorn Region, Wyoming-Montana

Structural analysis is being carried out on bands MSS 5 and 7 of scene 1085-17294. Geologic strucutre is primarily revealed in the topographic relief and drainage. Topographic linears are particularly well developed in the bighorn uplift. Many of these occur along known faults and shear zones in the Precambrian core; several have not been previously mapped. These linears, however, do not continue into the younger rocks of the flanks or do so in a much less marked manner than in the core. Linears are far less abundant in the basin or are manifested only in very subtle tonal contrasts and somewhat straight drainage segments. Some of the linears are aligned along trends previously postulated on the basis of surface mapping to be lineaments. The imagery reveals little or no evidence of strike-slip displacements along these lineaments.

Hoppin, R. A.↗
NASA NTRS1973

Hydrogeology of closed basins and deserts of South America, ERTS-1 interpretations

Images from the Earth Resources Technology Satellite (ERTS-1) contain data useful in studies of hydrogeology, geomorphology, and paleoclimatology. Sixteen Return Beam Vidicon (RBV) images and 15 Multi-Spectral Scanner (MSS) images were studied. These covered deserts and semidesert areas in southwestern Bolivia, northwestern Argentina, northern Chile, and southeastern Peru from July 30 to November 17, 1972. During the first 3 months after launching, high-quality cloud-free imagery was obtained over approximately 90 percent of the region of interior drainage, or an area of 170,000 square miles.

Stoertz, G. E.↗
NASA NTRS1973

Automatic interpretation of ERTS data for forest management

Automatic stratification of forested land from ERTS-1 data provides a valuable tool for resource management. The results are useful for wood product yield estimates, recreation and wild life management, forest inventory and forest condition monitoring. Automatic procedures based on both multi-spectral and spatial features are evaluated. With five classes, training and testing on the same samples, classification accuracy of 74% was achieved using the MSS multispectral features. When adding texture computed from 8 x 8 arrays, classification accuracy of 99% was obtained.

Kirvida, L.↗
NASA NTRS1973

Significant techniques in the processing and interpretation of ERTS-1 data

The discipline oriented investigations underway at the Johnson Space Center (JSC) using ERTS-1 data provide an appropriate framework for the systematic evaluation of the various elements comprising a prototype multispectral data processing and analysis system. In particular such a system may be thought of as the integration of: (1) a preprocessing subsystem; (2) a spectral clustering subsystem, (3) a correlation and classification subsystem; (4) mensuration subsystem; and (5) an information management subsystem. Specific elements of this system are already operational at JSC. It is in the context of this system that technique development and application is being pursued at JSC. Aircraft, ERTS and EREP data will be utilized to refine the subsystem elements for each of the data acquisition systems or system combinations that are optimally suited for a specific Earth Resources application. The techniques reported are those that have been developed to date during the utilization of ERTS-1 data in this processing and analysis system.

Cousin, S. B.↗
NASA NTRS1973

Combining human and computer interpretation capabilities to analyze ERTS imagery

The human photointerpreter and the computer have complementary capabilities that are exploited in a computer-based data analysis system developed at the Forestry Remote Sensing Laboratory, University of California. This system is designed to optimize the process of extracting resource information from ERTS images. The human has the ability to quickly delineate gross differences in land classes, such as wildland, urban, and agriculture on appropriate ERTS images, and to further break these gross classes into meaningful subclasses. The computer, however, can more efficiently analyze point-by-point spectral information and localized textural information which can result in a much more detailed agricultural or wildland classification based on species composition and/or plant association. These human and computer capabilities have been integrated through the use of an inexpensive small scale computer dedicated to the interactive preprocessing of the human inputs and the display of raw ERTS images and computer classified images. The small computer is linked to a large scale computer system wherein the bulk of the statistical work and the automatic point-by-point classification is done.

Nichols, J. D.↗
NASA NTRS1973

DCP-collected absolute target reflectance signatures assist accurate interpretation of ERTS-1 imagery

Data collection platforms (DCP's) are being used at a Black Hills, South Dakota, test site (MMC 226A) to record radiometric measurements needed to determine solar and atmospheric parameters that affect ERTS-1 multispectral scanner radiance measurements. A total of 72 channels of analog data transmitted from an unattended ground truth site via three DCP's at least six times a day. The system has operated with only minor problems since September, sending forth daily measurements of biophysical responses and atmospheric conditions. Comparisons of scene radiance data calculated from ERTS images with that measured on the ground show the image-measured values to be 35 percent higher for the green channel and 20 percent higher for the red channel for the same scene targets. Radiance values for channels 6 and 7 are nearly the same from the ground data and from the imagery.

Weber, F. P.↗