Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IMPACT ACCELERATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Analysis of Regolith Simulant Ejecta Distributions from Normal Incident Hypervelocity Impact

The National Aeronautics and Space Administration (NASA) has established the Constellation Program. The Constellation Program has defined one of its many goals as long-term lunar habitation. Critical to the design of a lunar habitat is an understanding of the lunar surface environment; of specific importance is the primary meteoroid and subsequent ejecta environment. The document, NASA SP-8013 'Meteoroid Environment Model Near Earth to Lunar Surface', was developed for the Apollo program in 1969 and contains the latest definition of the lunar ejecta environment. There is concern that NASA SP-8013 may over-estimate the lunar ejecta environment. NASA's Meteoroid Environment Office (MEO) has initiated several tasks to improve the accuracy of our understanding of the lunar surface ejecta environment. This paper reports the results of experiments on projectile impact into powdered pumice and unconsolidated JSC-1A Lunar Mare Regolith simulant targets. Projectiles were accelerated to velocities between 2.45 and 5.18 km/s at normal incidence using the Ames Vertical Gun Range (AVGR). The ejected particles were detected by thin aluminum foil targets strategically placed around the impact site and angular ejecta distributions were determined. Assumptions were made to support the analysis which include; assuming ejecta spherical symmetry resulting from normal impact and all ejecta particles were of mean target particle size. This analysis produces a hemispherical flux density distribution of ejecta with sufficient velocity to penetrate the aluminum foil detectors.

Edwards, David L.↗

Electron energy distributions measured during electron beam/plasma interactions

In the large vacuum facility at the NASA-Johnson Space Center an electron beam was projected 20 m parallel to B from a gun with variable accelerating potential (1.0 to 2.5 kV) to an aluminum target. The ionospheric neutral pressure and field were approximated. Beam electron energy distributions were measured directly using an electrostatic deflection analyzer and indirectly with a detector that responded to the X-rays produced by electron impact on the target. At low currents the distribution is sharply peaked at the acceleration potential. At high currents a beam plasma discharge occurs and electrons are redistributed in energy so that the former energy peak broadens to 10-15 percent FWHM with a strongly enhanced low energy tail. At the 10% of maximum point the energy spectrum ranges from less than 1/2 to 1.2 times the gun energy. The effect is qualitatively the same at all pitch angles and locations sampled.

Jost, R. J.↗

The Emergence and Impact of Intelligent Machines

The following issues are addressed in this essay: a) Models of Technology Trends: A discussion of why nanotechnology and related advanced technologies are inevitable. The underlying technologies are deeply integrated into our society and are advancing on many diverse fronts; and b) The Economic Imperatives of the Law of Accelerating Returns: The exponential advance of technology, including the accelerating miniaturization of technology, is driven by economic imperative, and, in turn, has a pervasive impact on the economy.

Kurzweil, Raymond↗

Applications of compact accelerator-driven neutron sources: An updated assessment from the perspective of materials research in Italy

In 2005 the International Atomic Energy Agency (IAEA) in Vienna published a report [1] on ‘Development Opportunities of Small and Medium Scale Accelerator Driven Neutron Sources’ which summarized the prospect of smaller sources in supporting the large spallation neutron sources for materials characterization and instrumentation, a theme advocated by Bauer, Clausen, Mank, and Mulhauser in previous publications [2-4]. In 2010 the Union for Compact Accelerator-driven Neutron Sources (UCANS) was established [5], galvanizing cross-disciplinary collaborations on new source and neutronics development and expanded applications based on both slow-neutron scattering and other neutron-matter interactions of neutron energies ranging from 10⁻⁶ to 10² MeV [6]. Here, we first cover the recent development of ongoing and prospective projects of compact accelerator-driven neutron sources (CANS) but concentrate on prospective accelerators currently proposed in Italy. Two active R&D topics, irradiation effects on electronics and cultural heritage studies, are chosen to illustrate the impact of state-of-the-art CANS on these programs with respect to the characteristics and complementarity of the accelerator and neutronics systems as well as instrumentation development.

43 PARTICLE ACCELERATORS↗

Solving Hard Problems with AI: Dramatically Accelerating Drug Discovery Through A Unique Public-Private Partnership

Dramatic disruptions in technologies can result in the creation of new markets, the emergence of new paradigms, and the displacement of entrenched approaches and business models. This can be especially pronounced when multiple technologies converge to create something new. Today, artificial intelligence (“AI”) is acting as an accelerant for such technology transformations. Still, the scope and depth of its impact will depend in part on our ability to address challenging problems that are surfacing without solutions. Industries will pursue AI for their corporate missions and to create shareholder value. But the timescales and applications can be incongruent with important public needs and with the longer research horizons required to make real progress. Public-Private partnerships are an important mechanism for tackling these rapidly emerging new, complex, challenging problems. Finally, this paper examines our experience gained by creating a unique public-private partnership to apply AI to one example of a hard problem that is particularly timely today-- dramatically accelerating drug discovery.

59 BASIC BIOLOGICAL SCIENCES↗

Laser-induced breakdown and damage generation by nonlinear frequency conversion in ferroelectric crystals: Experiment and theory

Using our experimental data for ns pulsed second harmonic generation (SHG) by periodically poled stoichiometric LiTaO{sub 3} (PPSLT) crystals, we consider in detail the mechanism underlying laser-induced damage in ferroelectric crystals. This mechanism involves generation and heating of free electrons, providing an effective kinetic pathway for electric breakdown and crystal damage in ns pulsed operation via combined two-photon absorption (TPA) and induced pyroelectric field. In particular, a temperature increase in the lattice of ≈1 K induced initially by ns SHG and TPA at the rear of operating PPSLT crystal is found to induce a gradient of spontaneous polarization generating a pyroelectric field of ≈10 kV/cm, accelerating free electrons generated by TPA to an energy of ≈10 eV, followed by impact ionization and crystal damage. Under the damage threshold for ns operation, the impact ionization does not lead to the avalanche-like increase of free electron density, in contrast to the case of shorter ps and fs pulses. However, the total number of collisions by free electrons, ≈10{sup 18} cm{sup −3} (generated during the pulse and accelerated to the energy of ≈10 eV), can produce widespread structural defects, which by entrapping electrons dramatically increase linear absorption for both harmonics in subsequent pulses, creating a positive feedback for crystal lattice heating, pyroelectric field and crystal damage. Under pulse repetition, defect generation starting from the rear of the crystal can propagate towards its center and front side producing damage tracks along the laser beam and stopping SHG. Theoretical analysis leads to numerical estimates and analytical approximation for the threshold laser fluence for onset of this damage mechanism, which agree well with our (i) experiments for the input 1064 nm radiation in 6.8 kHz pulsed SHG by PPSLT crystal, (ii) pulsed low frequency 532 nm radiation transmission experiments, and also (iii) with the data published for other nonlinear crystals and operated wavelengths.

36 MATERIALS SCIENCE↗

Characteristics of capacitor-type micrometeoroid flux detectors when impacted with simulated micrometeoroids

A series of impact tests are described and data presented which characterize the operation of the capacitor-type micrometeoroid flux detectors used on the Meteoroid Technology Satellite (MTS). Capacitor-type detectors with silicon dioxide dielectric thickness of 0.4 and 1.0 microns were tested in the micrometeoroid impact simulator at the Langley Research Center, a 4-MV Van de Graaff electrostatic accelerator. The carbonyl iron projectiles were from 0.5 to 5.0 microns in diameter with velocities from 4 to 10.0 km/sec. The detector bias voltage was varied from -20 to -60 V; some tests were at detector temperatures of 90 C to -100 C; and the angle of impact varied from 0 deg to 75 deg from the normal to the detector. These tests showed that: (1) the detector operation is reliable when the bias voltage is greater than 30 V; (2) after an impact the detector returns to its original condition with an insignificant loss of active area; and (3) the sensitivity of the detector is inversely proportional to the detector thickness. The test results suggest a theoretical model in which the signal is an arc triggered by the impacting projectile, and the detector bias voltage must be high enough to insure that an arc will form.

Kassel, P. C., Jr.↗

Plasma produced by impacts of fast dust particles on a thin film

The thin-film impact plasma detector was pioneered by Berg for detecting small cosmic dust particles and measuring their approximate velocities in a time-of-flight configuration. While Berg's device was highly successful in establishing the flux of interplanetary dust, the accuracy of measuring the velocities of individual particles was a moderate 18 percent in magnitude and 27 degrees in angle. A much greater accuracy of less than or equal to 1 percent in determining the velocity components appears desirable in order to associate a particle with its parent body. In order to meet that need, research was initiated to determine if a thin-film detector can be designed to provide such accurate velocity measurements. Previous laboratory investigations of the impact plasma uncovered two difficulties: (1) solid or liquid spray is ejected from a primary impact crater and strikes neighboring walls where it produces secondary impact craters and plasma clouds; as a result, both quantity and time of detection of the plasma can vary significantly with the experiment configuration. Particles from an accelerator rarely have speeds v greater than or equal to 10-15 km/s, while cosmic dust particles typically impact at v = 10-72 km/s. The purpose of the tests discussed in this paper was to resolve the two difficulties mentioned. That is, the experiment configuration was designed to reduce the contribution of plasma from secondary impacts. In addition, most particles with v less than or equal to 25 km/s and all particles with v less than or equal to 10 km/s were eliminated from the beam.

Auer, Siegfried↗

An assessment of coupling algorithms for nuclear reactor core physics simulations

This paper evaluates the performance of multiphysics coupling algorithms applied to a light water nuclear reactor core simulation. The simulation couples the k-eigenvalue form of the neutron transport equation with heat conduction and subchannel flow equations. We compare Picard iteration (block Gauss–Seidel) to Anderson acceleration and multiple variants of preconditioned Jacobian-free Newton–Krylov (JFNK). The performance of the methods are evaluated over a range of energy group structures and core power levels. A novel physics-based approximation to a Jacobian-vector product has been developed to mitigate the impact of expensive on-line cross section processing steps. Numerical simulations demonstrating the efficiency of JFNK and Anderson acceleration relative to standard Picard iteration are performed on a 3D model of a nuclear fuel assembly. Both criticality (k-eigenvalue) and critical boron search problems are considered.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

2700 years of Mediterranean environmental change in central Italy: a synthesis of sedimentary and cultural records to interpret past impacts of climate on society

We report abrupt climate change in the past is thought to have disrupted societies by accelerating environmental degradation, potentially leading to cultural collapse. Linking climate change directly to societal disruption is challenging because socioeconomic factors also play a large role, with climate being secondary or sometimes inconsequential. Combining paleolimnologic, historical, and archaeological methods provides for a more secure basis for interpreting the past impacts of climate on society. We present pollen, non-pollen palynomorph, geochemical, paleomagnetic and sedimentary data from a high-resolution 2700 yr lake sediment core from central Italy and compare these data with local historical documents and archeological surveys to reconstruct a record of environmental change in relation to socioeconomic history and climatic fluctuations. Here we document cases in which environmental change is strongly linked to changes in local land management practices in the absence of clear climatic change, as well as examples when climate change appears to have been a strong catalyst that resulted in significant environmental change that impacted local communities. During the Imperial Roman period, despite a long period of stable, mild climate, and a large urban population in nearby Rome, our site shows only limited evidence for environmental degradation. Warm and mild climate during the Medieval Warm period, on the other hand, led to widespread deforestation and erosion. The ability of the Romans to utilize imported resources through an extensive trade network may have allowed for preservation of the environment near the Roman capital, whereas during medieval time, the need to rely on local resources led to environmental degradation. Cool wet climate during the Little Ice Age led to a breakdown in local land use practices, widespread land abandonment and rapid reforestation. Our results present a high-resolution regional case study that explores the effect of climate change on society for an under-documented region of Europe.

58 GEOSCIENCES↗

Permafrost and Climate Change: Carbon Cycle Feedbacks From the Warming Arctic

Rapid Arctic environmental change affects the entire Earth system as thawing permafrost ecosystems release greenhouse gases to the atmosphere. Understanding how much permafrost carbon will be released, over what time frame, and what the relative emissions of carbon dioxide and methane will be is key for understanding the impact on global climate. In addition, the response of vegetation in a warming climate has the potential to offset at least some of the accelerating feedback to the climate from permafrost carbon. Temperature, organic carbon, and ground ice are key regulators for determining the impact of permafrost ecosystems on the global carbon cycle. Together, these encompass services of permafrost relevant to global society as well as to the people living in the region and help to determine the landscape-level response of this region to a changing climate.

54 ENVIRONMENTAL SCIENCES↗

EFFECTS OF QUARTZ PARTICLE SIZE AND SUCROSE ADDITION ON MELTING BEHAVIOR OF A MELTER FEED FOR HIGH-LEVEL GLASS

The behavior of melter feed (a mixture of nuclear waste and glass-forming additives) during waste-glass processing has a significant impact on the rate of the vitrification process. We studied the effects of silica particle size and sucrose addition on the volumetric expansion (foaming) of a high-alumina feed and the rate of dissolution of silica particles in feed samples heated at 5 C/min up to 1200 C. The initial size of quartz particles in feed ranged from 5 to 195 {micro}m. The fraction of the sucrose added ranged from 0 to 0.20 g per g glass. Extensive foaming occurred only in feeds with 5-{micro}m quartz particles; particles {ge}150 {micro}m formed clusters. Particles of 5 {micro}m completely dissolved by 900 C whereas particles {ge}150 {micro}m did not fully dissolve even when the temperature reached 1200 C. Sucrose addition had virtually zero impact on both foaming and the dissolution of silica particles. Over 100 sites in the United States are currently tasked with the storage of nuclear waste. The largest is the Hanford Site located in southeastern Washington State with 177 subterranean tanks containing over fifty-million gallons of nuclear waste from plutonium production from 1944 through 1987. This waste will be vitrified at the Hanford Tank Waste Treatment and Immobilization Plant. In the vitrification process, feed is charged into a melter and converted into glass to be ultimately stored in a permanent repository. The duration of waste-site cleanups by the vitrification process depends on the rate of melting, i.e., on the rate of the feed-to-glass conversion. Foaming associated with the melting process and the rate of dissolution of quartz particles (silica being the major glass-forming additive) are assumed to be important factors that influence the rate of melting. Previous studies on foaming of high-alumina feed demonstrated that varying the makeup of a melter feed has a significant impact on foaming. The volume of feeds that contained 5-{micro}m quartz particles substantially increased because of foaming. The extent of foaming decreased as the particle size of quartz increased. Moreover, samples containing quartz particles 195 {micro}m formed agglomerates at temperatures above 900 C that only slowly dissolved in the melt. This study continues previous work on the feed-melting process, specifically on the effects of the size of silica particles on the formation of nuclear-waste glasses to determine a suitable range of silica particle sizes that causes neither excessive foaming nor undesirable agglomeration. Apart from varying the silica-particle size, carbon was added in the form of sucrose. Sucrose has been used to accelerate the rate of melting. In this study, we have observed its impact on feed foaming and quartz dissolution.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Enhancement of RF Breakdown Threshold of Microwave Cavities by Magnetic Insulation

Limitations on the maximum achievable accelerating gradient of microwave cavities can influence the performance, length, and cost of particle accelerators. Gradient limitations are believed to be initiated by electron emission from the cavity surfaces. Here, we show that field emission is effectively suppressed by applying a tangential magnetic field to the cavity walls, so higher gradients can be achieved. Numerical simulations indicate that the magnetic field prevents electrons leaving these surfaces and subsequently picking up energy from the electric field. Our results agree with current experimental data. Two specific examples illustrate the implementation of magnetic insulation into prospective particle accelerator applications. The ultimate goal of several research efforts is to integrate high-gradient radio-frequency (rf) structures into next generation particle accelerators. For instance, the Muon Accelerator Program is looking at developing low-frequency cavities for muon cooling, and the International Linear Collider is optimizing the performance of 1.3 GHz rf structures aimed at designing a 1 TeV electron-positron collider. Furthermore, the High Gradient RF Collaboration is examining high frequency (f > 10 GHz) structures intended for an electron-positron collider operating at energies in the TeV range. In all this research, the accelerating gradient will be one of the crucial parameters affecting their design, construction, and cost. Limitations from rf breakdown strongly influence the development of accelerators since it limits the machine's maximum gradient. The emission of electrons from the cavity surfaces seemingly is a necessary stage in the breakdown process, acting either as a direct cause of breakdown or as precursor for other secondary effects. Typically, electron currents arise from sharp edges or cracks on the cavities surfaces, where the strength of the electric field is strongly enhanced compared to that of the nominal field when the surfaces of the cavity are perfect planes. Subsequently, a stream of emitted electrons can be accelerated by the rf electric field toward the opposing cavity walls. Upon impact, they heat a localized region, resulting in the eventual breakdown by a variety of secondary mechanisms. Therefore, it is advantageous to develop techniques that could suppress field emission within rf cavities. It has been proposed that high voltages up to about a gigavolt range may be sustained in voltage transformers, by adopting the principle of magnetic insulation in ultrahigh vacuum. The basic idea is to suppress field emission by applying a suitably directed magnetic field of sufficient strength to force the electrons orbits back on to the rf emitting surface. More recently, it was shown that magnetic insulation could be very effective in suppressing field emission and multipacting in rectangular coupler waveguides. Hence, the question arises whether the same principle is applicable to rf accelerating structures. In this Letter, we shall consider application of the concept to low-frequency (201-805 MHz) muon accelerator cavities.

43 PARTICLE ACCELERATORS↗

Integrated Approach to Post-Irradiation Examination of Nuclear Materials at Idaho National Laboratory

Idaho national Laboratory (INL) is the U.S. lead national laboratory for the Department of Energy’s Office of Nuclear Energy (DOE-NE), providing much of the nuclear research, development and demonstration capability needed to move nuclear innovation forward to deployment. INL’s Materials and Fuels Complex hosts a unique combination of personnel, facilities and infrastructure and offers the ability to perform post-irradiation examinations (PIE) of nuclear materials spanning multiple length scales. The ability to combine engineering-scale analysis and sub-microscopic characterization provides valuable insights into fuel and structural material behavior and degradation mechanisms. The holistic approach is used to accelerate these materials demonstration and deployment. Selected studies will be presented, highlighting the impact of these techniques on improving fuel reliability, safety, and efficiency, thereby advancing the development of sustainable and advanced nuclear energy technologies.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Basic Research Needs Workshop on Compact Accelerators for Security and Medicine: Tools for the 21st Century, May 6-8, 2019

Accelerator-based radiation sources are ubiquitous tools for imaging and treatment in the fields of medicine and security that save millions of lives, impact billions of dollars of commercial goods annually, and fulfill a critical role in US national security. Today’s commercially available accelerator technology has fallen significantly behind the state-of-the-art. Advancing and transferring state-of-the-art compact accelerator technology into broader use holds the promise of achieving greater control, power, and automation, which can significantly enhance society’s ability to sense and control the world around us. The Workshop identified a wealth of opportunities to advance these technologies from today’s commercial baselines, largely based on half-century old developments, by employing emerging concepts in charged particle acceleration and radiation generation and detection, along with modern ways of thinking about and utilizing developments in systems engineering, advanced materials, supply chain management, manufacturing, advanced computation, energy storage, and artificial intelligence.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Modeled sensitivity of multi-MA accelerator performance to electrode contaminant inventory

Significant particle-in-cell code development has enabled simulations of power flow in multi-MA accelerators to include the desorption of surface contaminants, their ionization into surface plasmas, and the impact of these plasmas on efficiency. The simulations base desorption on an Arrhenius equation, whose most significant unknown is the surface contaminant inventory. The sensitivity of power-flow simulations to this inventory is studied here using Sandia National Laboratories' Z accelerator with a 7-nH MagLIF load [Phys. Plasmas 17, 056303 (2010)]. Simulations are conducted in 3D cylindrical coordinates for the current-adder, or “convolute,” region of Z and in 2D for the final feed only. Simulated contaminant inventories are varied from 1 to 32 monolayers (MLs) in 2D, and 2 to 4 ML in 3D. The results reveal sensitivities to the local ratio of E/B⁠. The high B-field, low E-field region near the short-circuit load is insensitive to the contaminant inventory, where assumed values of 4–32 ML change the load current by ≤ 2%, and agree with experiment to within 2% at peak current. A 1-ML value is the outlier, increasing the load current by 5%, but still within measurement uncertainty. In contrast, the relatively higher E-field, lower B-field convolute region has slower contaminant desorption and higher-magnitude E-field penetration of the surface plasmas. The current loss in the convolute region does increase with contaminant inventory. The loss assuming 4 ML is 12% larger than for 2 ML, with 4 ML being the better match to experiment.

Arrhenius equation↗

Disturbance legacies regulate coastal forest soil stability to changing salinity and inundation: A soil transplant experiment

Coastal forests worldwide are vulnerable to a dramatic transition from upland to wetland as sea-level rise accelerates and regimes of precipitation and storms change. However, the biogeochemical impacts of shifting salinity and inundation disturbance that foreshadow forest to wetland state transitions are largely unknown. This experiment used a natural salinity gradient in a tidal creek in eastern Maryland, U.S.A., to examine how soil respiration and chemistry may change under novel salinity and inundation disturbance regimes. Soil monoliths were transplanted in a reciprocal design among plots varying in seawater exposure and elevation above the creek. We monitored the monoliths’ carbon dioxide (CO 2 ) flux for two years and performed soil chemical analyses at the end of the experiment. Soil CO 2 flux was affected by changing disturbance regimes and responses were dependent upon the salinity and inundation legacies associated with each study location. Lowland soil CO 2 flux was resistant to changing salinity and inundation disturbance, with transplanted soil monolith chemistry composition in between that of its origin and destination. Conversely, upland soil CO 2 flux was sensitive to changing salinity and inundation disturbance and remained suppressed throughout the 2-year study when exposed to wetter, saline conditions. Additionally, transplanted upland soil chemistry composition was like that of its destination, rather than origin, with upland soils displaying higher pH, base saturation, and nutrient availability relative to lowland soils. Here, we hypothesize that reductions in soil respiration rates were driven by loss of soil nutrients and osmotic and redox stress on microbial communities following exposure to seawater. Together, our results suggest that disturbance legacies shape coastal forest soil responses to changing salinity and inundation disturbance regimes. However, fully understanding the dependence of system responses on disturbance legacies requires future study across a variety of systems and spatial and temporal scales.

54 ENVIRONMENTAL SCIENCES↗