Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HEIGHTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Sounder design considerations in the selection of temperature sensing channels

Simulation studies on the performance of IR sounders under varying conditions of cloud cover and cloud heights are carried out for Nimbus 6. An analytic function is derived for calculating the relative response to cloud height errors for arbitrary cloud-sensing channels. Based on the values of the response function, the best choice of channels for determining cloud amounts are obtained. An algorithm is described for determining cloud heights, and the sensitivity of cloud-height sensing channels is tested. It is found that for the HIRS instrument, the most transparent channel in the 4.3-micron band is optimal for adjusting cloud heights, while the channel in the 15-micron band peaking closest to the surface is best for determining cloud amounts

Halem, M.↗
NASA NTRS1977

Research study on neutral thermodynamic atmospheric model

The Global Reference Atmospheric Model is used along with the revised perturbation statistics to evaluate and computer graph various atmospheric statistics along a space shuttle reference mission and abort trajectory. The trajectory plots are height vs. ground range, with height from ground level to 155 km and ground range along the reentry trajectory. Cross sectional plots, height vs. latitude or longitude, are also generated for 80 deg longitude, with heights from 30 km to 90 km and latitude from -90 deg to +90 deg, and for 45 deg latitude, with heights from 30 km to 90 km and longitudes from 180 deg E to 180 deg W. The variables plotted are monthly average pressure, density, temperature, wind components, and wind speed and standard deviations and 99th inter-percentile range for each of these variables.

Hargraves, W. R.↗
NASA NTRS1977

Cold-air performance of a 12.766-centimeter-tip-diameter axial-flow cooled turbine. 3: Effect of rotor tip clearance on overall performance of a solid blade configuration

Two tip clearance configurations, one with a recess in the casing and the other with a reduced rotor blade height, were investigated at design equivalent speed over a range of tip clearance from about 2.0 to 5.0 percent of the stator blade height. The optimum configuration with a recess in the casing was the one where the rotor tip diameter was equal to the stator tip diameter (zero blade extension). For this configuration there was an approximate 1.5 percent decrease in total efficiency for an increase in tip clearance of 1 percent of stator blade height. For the reduced blade height configurations there was an approximate 2.0 percent decrease in total efficiency for an increase in tip clearance of 1 percent of stator blade height.

Haas, J. E.↗
NASA NTRS1978

Remote sensing of Gulf Stream using GEOS-3 radar altimeter

Radar altimeter measurements from the GEOS-3 satellite to the ocean surface indicated the presence of expected geostrophic height differences across the the Gulf Stream. Dynamic sea surface heights were found by both editing and filtering the raw sea surface heights and then referencing these processed data to a 5 minute x 5 minute geoid. Any trend between the processed data and the geoid was removed by subtracting out a linear fit to the residuals in the open ocean. The mean current velocity of 107 + or - 29 cm/sec calculated from the dynamic heights for all orbits corresponded with velocities obtained from hydrographic methods. Also, dynamic topographic maps were produced for August, September, and October 1975. Results pointed out limitations in the accuracy of the geoid, height anomaly deteriorations due to filtering, and lack of dense time and space distribution of measurements.

Leitao, C. D.↗
NASA NTRS1977

Nighttime thermospheric winds at low latitudes deduced from AE-C ionospheric measurements

The paper describes a method for determining the height of the F2 peak and of neutral wind velocities in the tropical nighttime ionosphere from measurements of ionospheric plasma parameters. The ratio of the O I 6300-A column density, observed above the AE-C satellite, to its volume emission rate, at the satellite, was shown to be dependent on the satellite height, the exospheric temperature, and the height of the F2 peak. The analysis of simultaneous nighttime measurements of the electron density, the O2(plus) density, and the 6300-A vertical column intensity has led to the values of the height of the F2 peak. The sum of the neutral wind velocities in the magnetic meridian at magnetically conjugate points has been inferred from the height difference in the F2 peak at the conjugate points.

Bittencourt, J. A.↗
NASA NTRS1979

Thrust and mass flow characteristics of four 36 inch diameter tip turbine fan thrust vectoring systems in and out of ground effect

The calibration tests carried out on the propulsion system components of a 70 percent scale, powered model of a NASA 3-fan V/STOL aircraft configuration are described. The three X3/6B/T58 turbotip fan units used in the large scale powered model were tested on an isolated basis over a range of ground heights from H/D of 1.02 to infinity. A higher pressure ratio LF336/J85 fan unit was tested over a range of ground heights from 1.55 to infinity. The results of the test program demonstrated that: (1) the thrust and mass flow performance of the X376B/T58 nose lift unit is essentially constant for H/D variations down to 1.55; at H/D 1.02 back pressurization of the fan exit occurs and is accompanied by an increase in thrust of five percent; (2) a change in nose fan exit hub shape from flat plate to hemispherical produces no significant difference in louvered lift nozzle performance for height variations from H/D = 1.02 to infinity; (3) operation of the nose lift nozzle at the higher fan pressure ratio generated by the LF336/J85 fan system causes no significant change in ground proximity performance down to an H/D of 1.55, the lowest height tested with this unit; and (4) the performance of the left and right X376B/T58 lift/cruise units in the vertical lift mode remains unchanged, within plus or minus two percent for the range of ground heights from H/D = 1.02 to infinity.

Esker, D. W.↗
NASA NTRS1981

Closed coronal structures. II - Generalized hydrostatic model

Numerical computations of stationary solar coronal loop atmospheres are used to extend earlier analytical work. Two classes of loops are examined, namely symmetric loops with a temperature maximum at the top but now having a length greater than the pressure scale height and loops which have a local temperature minimum at the top. For the first class, new scaling laws are found which relate the base pressure and loop length to the base heating, the heating deposition scale height, and the pressure scale height. It is found that loops for which the length is greater than about two to three times the pressure scale height do not have stable solutions unless they have a temperature minimum at the top. Computed models with a temperature inversion at the top are permitted in a wider range of heating deposition scale height values than are loops with a temperature maximum at the top. These results are discussed in relation to observations showing a dependence of prominence formation and stability on the state of evolution of magnetic structures, and a general scenario is suggested for the understanding of loop evolution from emergence in active regions through the large-scale structure phase to opening in coronal holes.

Serio, S.↗
NASA NTRS1982

Stereoscopic observations of hurricanes and tornadic thunderstorms from geosynchronous satellites

Results are presented which show the application of GOES stereoscopy to the investigation of hurricanes and tornadic thunderstorms. Stereo cloud top height contour maps were constructed to observe the structural evolution of two hurricanes, Frederic on September 12, 1979 and Allen on August 8, 1980, and a tornadic thunderstorm complex over Oklahoma on May 2-3, 1979. Stereo height contours of Hurricane Allen reveal a very intense and symmetric storm with a circular shaped central dense overcast with an average height of 16.5 km. Contours of Hurricane Frederic reveal a preferred region for convection with an explosive exhaust tower attaining a maximum height of 17.8 km. Also presented is a technique for estimating tropical cyclone intensity using GOES stereo height and IR temperature information. Results indicate vertical motions ranging from 4.4 m/s for a moderate storm to 7.7 m/s for an intense storm.

Mack, R.↗
NASA NTRS1983

Solar control of winter mesospheric echo occurrence at Poker Flat, Alaska

Winter mesospheric echoes are observed between about 55 and 80 km when auroral absorption is present during daylight hours. Relatively steady auroral absorption during sunrise and sunset periods causes a distinct onset and decay signature in mesospheric echo occurrence. The echo onset and disappearance time are shown versus height by the inclined lines for four different dates. The more vertical lines give the visible sunlight height/time curves for both sunrise (SR) and sunset (SS). The data is combined and replotted to give the morning onset height and the afternoon disappearance height as a function of solar zenith angle. Echoes are not observed at the lowest heights in the morning until the solar zenith angle is less than 90 deg. The afternoon echoes at the lowest heights also start to disappear as soon as the solar zenith angle exceeds 90 deg, implying that the solar component which sustains the mesospheric echo is screened by a layer extending up to about 60 km. The morning echo at 73 km onsets near the time of visible sunrise, but in the afternoon the 73 km echo lasts well past visible sunset.

Ecklund, W. L.↗
NASA NTRS1985

Seasonal variation of the stratospheric circulation

An extensive analysis is made of the extratropical stratospheric circulation in terms of the seasonal variation of large-scale motion fields, with the aid of height and temperature data obtained from the TIROS satellite. Special attention is paid to a comparison of climatological aspects between the Northern Hemisphere (NH) and the Southern Hemisphere (SH). In order to see the general picture of the annual mach of the upper stratosphere, the zonal mean values of geopotential height of the 1 mb level at 70 deg N and 70 deg S were plotted on the daily basis throughout a year. It is observed that, during the winter, the zonal mean 1 mb height in the NH is much more variable than that in the SH. It is also notable that the SH height is rather oscillatory throughout the longer period from midwinter to early summer. Since the zonal mean height in the polar latitude is a rough measure of the mean zonal flow in extratropical latitudes, the difference of the seasonal variation between the two hemispheres mentioned above is considered to be due mainly to the planetary wave-mean flow interaction in the middle atmosphere. The wave activity in the middle atmosphere is represented more rigorously by the Eliassen-Palm flux associated with vertically propagating planetary waves forced from below. The day-to-day variation of the EP flux in the upper stratosphere shows that the wave activity varies intermittently with a characteristic time scale of about two weeks.

Hirota, I.↗
NASA NTRS1985

Broadening of looplike solar coronal transients

The broadening of the tops of nine outwardly expanding looplike coronal mass-ejection transients observed during 1973-1974 and 1980 has been examined. Five of the nine transients exhibit increased breadth with time (height); although the rates vary widely, no event shows an increase which can be fitted by a power-law form with a greater-than-linear increase with height. The breadth of four events decreases with height. When all nine events are considered together, the transient breadth with height is fitted with an expression h varies as R exp 0.48 with large scatter. In addition, measurements of the total observed loop length of the nine transients show that this length L varies as R exp 1.30. Both of these results are contrary to the predictions of one model of loop expulsion as a result of an assumed azimuthal magnetic field gradient. Finally, when combined with the facts that looplike mass ejections are usually associated with the occurrence of eruptive prominences, and that such mass ejections are generally accelerated through the corona, it is found that the observed variation of transient breadth with height contradicts some characteristics of self-similar fluid flow which have been ascribed to mass-ejection transients.

Macqueen, R. M.↗
NASA NTRS1986

MIE Lidar proposed for the German Space Shuttle Mission D2

Firm plans for a second German Spacelab mission (D2-mission), originally scheduled for late 1988 is basically a zero-g mission, but will also include earth observation experiments. On board the D2-facility will allow performance of a number of different measurements with the goal to obtain performance data (cloud top heights, height of the planetary boundary layer, optical thickness, and cloud base height of thin and medium thick clouds, ice/water phase discriminatin for clouds, tropopause height, tropaspheric height, tropospheric aerosols, and stratospheric aerosols.

Renger, W.↗
NASA NTRS1986

Lidar measurements of thermal structure

Rayleigh backscatter observations at 532 nm and 355 nm of relative atmospheric density above Aberystwyth on a total of 93 nights between Dec. 1982 and Feb. 1985 were used to derive the height variation of temperature in the upper stratosphere and mesosphere. Preliminary results for height up to about 25 km were also obtained from observations of Raman backscattering from nitrogen molecules. Comparisons were carried out for stratospheric heights with satellite borne measurements; good agreement was found between equivalent black body temperatures derived from the lidar observations and those obtained from nadir measurements in three channels of the stratosphere sounder units on NOAA satellites; the lidar based atmospheric temperatures have shown general agreement with but a greater degree of structure than the limb sounding measurements obtained using the SAMS experiment on the NOAA-7 satellite. In summer, stratospheric and mesospheric temperatures showed a smooth height variation similar to that of the CIRA model atmosphere. In contrast, the winter data showed a great variability with height, and marked temperature changes both from night to night and within a given night.

Jenkins, D. B.↗
NASA NTRS1987

A method of calculating the total flow from a given sea surface topography

Using a simple dynamical model of a wind-driven ocean circulation of the Stommel type, and an analytical basis developed to objectively analyze the sea surface height residuals from an altimeter and, in the process, to determine the total flow instead of just the near surface geostrophic component associated with the given sea surface topography. The method is based on first deriving the solution to the forced problem for a given wind stress required to develop a hypothetical true or perfect data field and to establishing the basis for the objective analysis. The stream function and the surface height field for the forced problem are developed in terms of certain characteristic functions with the same expansion coefficients for both fields. These characteristic functions are simply the solutions for a homogeneous elliptic equation for the stream function and the solutions of an inhomogeneous balance equation for the height field. For the objective analysis, using a sample of randomly selected height values from the true data field, the height field characteristic functions are used to fit the given topography in a least squares sense. The resulting expansion coefficients then permit the synthesis of the total flow field via the stream function characteristic modes and the solution is perfectly well behaved even along the equator. The method of solution is easily adaptable to realistic ocean basis by straight forward numerical methods. The analytical basis of the theory and the results for an ideal rectangular basin on a beta plane are described.

Rao, Desiraju B.↗
NASA NTRS1988

Integrated circuit reliability testing

A technique is described for use in determining the reliability of microscopic conductors deposited on an uneven surface of an integrated circuit device. A wafer containing integrated circuit chips is formed with a test area having regions of different heights. At the time the conductors are formed on the chip areas of the wafer, an elongated serpentine assay conductor is deposited on the test area so the assay conductor extends over multiple steps between regions of different heights. Also, a first test conductor is deposited in the test area upon a uniform region of first height, and a second test conductor is deposited in the test area upon a uniform region of second height. The occurrence of high resistances at the steps between regions of different height is indicated by deriving the measured length of the serpentine conductor using the resistance measured between the ends of the serpentine conductor, and comparing that to the design length of the serpentine conductor. The percentage by which the measured length exceeds the design length, at which the integrated circuit will be discarded, depends on the required reliability of the integrated circuit.

Buehler, Martin G.↗
NASA NTRS1989

The effect of latent heat release on synoptic-to-planetary scale wave interactions: Observational study

A blocking pattern which formed over eastern North America following the landfall of Hurricane Juan during November 1985 was investigated. It is hypothesize that latent heat released in the Hurricane's rainfall was either directly or indirectly responsible for the large observed 500 mb height rises over eastern Canada during the formation of this block. This idea is evaluated with a diagnostic model for the height tendency field which includes latent heat release as a forcing function. The total column heating is calculated using satellite-derived precipitation estimates. These estimates are qualitatively congruent with observations, but overestimate light rainfall and underestimate heavy rainfall. The calculations reveal that the direct contribution of the heating to the 500 mb height tendency field is small relative to the quasigeostrophic forcing. However, maxima in heating coincide with regions where anticyclonic potential vorticity is generated. Once such region is just upstream of the location of large 500 mb height rises in the incipient block. An indirect role is proposed for the heating in this case. Specifically, anticyclonic potential vorticity is generated near the heating maxima; this vorticity is then advected downstream, forcing the 500 mb heights to rise and the block to develop.

Colucci, Stephen↗
NASA NTRS1990

Analysis of altimetry over inland seas

Satellite-based altimetric data taken by GEOS-3 and SEASAT over the Black Sea and Caspian Sea are analyzed and a least squares collocation technique is used to predict the geoid undulation on a .25-degree by .25-degree grid and to transform these geoid undulations to free air gravity anomalies. This project entailed processing satellite altimeter data over inland seas for recovery of area mean gravity information. Gravity information in this area of the world is not readily available, so the possibility of obtaining it from the processing of altimeter observations is attractive. The principal objective was to complete and extend analyses done in a previous study, verify those results, and document the results and techniques. A secondary objective was to improve the algorithms and results, if possible. The approach used involved editing geoid height data to remove overland data; evaluating geoid height differences at crossover points; removing orbit errors from geoid heights using crossover differences; gridding geoid height data at .25-degree by .25-degree intervals; and estimating the gravity anomalies from gridded geoid heights using the collocation technique.

Au, A. Y.↗
NASA NTRS1989

Solar activity influence on climatic variations of stratosphere and mesosphere in mid-latitudes

The direct modulation of temperature of the mid-latitude mesosphere by the solar-cycle EUV variation, which leads to greater heat input at higher solar activity, is well established. Middle atmosphere temperature modulation by the solar cycle is independently confirmed by the variation of reflection heights of low frequency radio waves in the lower ionosphere, which are regularly monitored over about 30 years. As explained elsewhere in detail, these reflection heights depend on the geometric altitude of a certain isobaric surface (near 80 k), and on the solar ionizing Lyman-alpha radiation flux. Knowing the solar cycle variation of Lyman-alpha how much the measured reflection heights would be lowered with the transition from solar minimum to maximum can be calculated, if the vertical baric structure of the neutral atmosphere would remain unchanged. An discrepancy between expected and observed height change must be explained by an uplifting of the isobaric level from solar minimum to maximum, caused by the temperature rise in the mesosphere. By integrating the solar cycle temperature changes over the height region of the middle atmosphere, and assuming that the lower boundary (tropopause) has no solar cycle variation, the magnitude of this uplifting can be estimated. It is given for the Lidar-derived and for the rocket-measured temperature variations. Comparison suggests that the real amplitude of the solar cycle temperature variation in the mesosphere is underestimated when using the rocket data, but probably overestimated with the Lidar data.

Taubenheim, J.↗