Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HAZARD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Flood warnings, flood disaster assessments, and flood hazard reduction: the roles of orbital remote sensing

Orbital remote sensing of the Earth is now poised to make three fundamental contributions towards reducing the detrimental effects of extreme floods. Effective Flood warning requires frequent radar observation of the Earth's surface through cloud cover. In contrast, both optical and radar wavelengths will increasingly be used for disaster assessment and hazard reduction.

floods↗

Non-Geometric Hazard Detection for a Mars Microrover

Non-geometric hazards (i.e., those which cannot be characterized solely by their shape, but instead are related to mechanical properties such as strength and friction) may pose a significant risk to planetary rovers. This paper describes a means for an articulated vehicle to detect sinkage and slippage in such material so as to prevent entrapment and to correct for dead-reckoning errors.

hazards↗

Hazard Perception and Avoidance (HPA): Technical Work Overview

This short presentation provides an overview of the technical work that has been performed, and is planned, under the Advanced Air Mobility project's Hazard Perception and Avoidance (HPA) technical area. The presentation starts with a brief overview of the HPA technical area. The brief then covers a recently-completed part task human-in-the-loop simulation and outlines a follow-on simulation that is planned for August. The next portion of the brief outlines HPA's flight test plans, including some details on the Integration of Automated Systems (IAS) flights planned for 2023. The presentation ends with a high level overview of the activies planned in the out years of the HPA project.

advance air mobility↗

Hazard Perception and Avoidance (HPA) Technical Work Overview

This short presentation provides an overview of the technical work that has been performed, and is planned, under the Advanced Air Mobility project's Hazard Perception and Avoidance (HPA) technical area. The presentation starts with a brief overview of the HPA technical area. The brief then covers a recently-completed part task human-in-the-loop simulation and outlines a follow-on simulation that is planned for August. The next portion of the brief outlines HPA's flight test plans, including some details on the Integration of Automated Systems (IAS) flights planned for 2023. The presentation ends with a high level overview of the activies planned in the out years of the HPA project.

advanced air mobility↗

Development of a Compact Lidar Sensor for Terrain Relative Navigation and Terrain Hazard Avoidance

A Lidar sensor utilizing linear-mode flash lidar technology and a novel Super-Resolution technique has been developed for providing Terrain Relative Navigation and Hazard Avoidance capabilities onboard landing vehicles. Processing algorithms for precision navigation and safe landing location identification take advantage of the uniform fixed pixels property of generated high resolution Digital Elevation Maps to achieve high reliability operation in near real-time. This paper describes the results of drone and helicopter flight tests of a breadboard system, explains the design and capabilities of a recently built compact prototype unit, and proposes a concepts of operation for future landing missions.

3-D Imaging↗

Development of a Compact Lidar Sensor for Terrain Relative Navigation and Terrain Hazard Avoidance

A Flash Lidar utilizing a novel Super-Resolution (SR) technique has been developed for providing Terrain Relative Navigation and Hazard Avoidance capabilities onboard landing vehicles. Processing algorithms for precision navigation and safe landing location identification take advantage of the uniform fixed pixels property of generated high resolution Digital Elevation Maps (DEMs) to achieve high reliability operation in near real-time. This paper describes the current and next generation breadboard units, report the results of recent dynamic tests, and explain the operational concept as envisioned for future landing missions.

3-D Imaging↗

RCRA Part A Permit Application for Waste Management Activities at the Nevada National Security Site Hazardous Waste Storage Unit (HWSU), Explosive Ordnance Disposal Unit (EODU), Mixed Waste Storage Unit (MWSU), and Mixed Waste Disposal Unit (MWDU)

This document is the first volume in a Resource Conservation Recovery Act (RCRA) Permit Application to the Nevada Division of Environmental Protection for continued operation of certain facilities on the Nevada National Security Site (NNSS), owned by the U.S. Department of Energy, National Nuclear Security Administration Nevada Field Office (NNSA/NFO). This RCRA permit application pertains to the Hazardous Waste Storage Unit (HWSU), the Explosive Ordnance Disposal Unit (EODU), the Mixed Waste Storage Unit (MWSU), and the Mixed Waste Disposal Unit (MWDU). This volume lists the relevant permits for each of these facilities and provides maps and drawings of many aspects of them. The companion volumes, which provide descriptive text and discussion and additional graphics, are jointly considered Part B of the permit application. Those volumes are identified by the following document numbers: DOE/NV/25946--2442, DOE/NV/25946--2448, DOE/NV/25946--2425, and DOE/NV/25946--2429.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Guide to specifying a powered manipulator for operation in hazardous environments - 15510

Manipulators have been used extensively to perform remote nuclear operations, handle hazardous materials and perform decommissioning activities. As payload and reach requirements increase, manually powered tooling options are often under-powered, or too delicate to perform. When this occurs powered manipulators are often used to meet the need. Powered manipulator types commonly used are electro-mechanically powered and hydraulically powered manipulators. A number of factors will need to be weighed in order to determine the type of manipulator that best meets the needs of the application. While there is not a single manipulator type that is best suited for all applications each type has its own strengths and weaknesses. The challenge to the site operator is to determine the most effective solution for the job at hand. Operating envelope, installation methods, control system, payload, radiation levels and failure modes are some of the most important requirements to consider. Regardless of the manipulator type chosen the most economical solution is often a customized pre-engineered solution. Existing, proven designs can often be modified slightly to meet the unique needs of a project. Often times it is not possible to meet requirements with a pre-engineered solution and a custom solution must be created. Even with a custom design standard design elements can often be used to decrease cost, increase reliability and improve performance. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Smart Drum Technology for Radioactive and Other Hazardous Materials - 18273

Smart drum technology is the result of a coupling between a robust drum-type package containing radioactive and other hazardous materials and the ARG-US radio frequency identification (RFID) system that enables 'unattended' remote monitoring of the State of Health of the package and contents - in real time, 24/7, with automatic alert/alarm capabilities. Recent educational demos of the system are highlighted. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Experimental Evaluation of an Oxidizing Hazard in the Presence of Sorbents

Oxidizing chemicals are commonly found in waste generated from actinide separations and other chemical processes. Because they can create and/or increase the combustion of combustible materials, they need to be experimentally evaluated, in order to provide a highly reliable assessment of their potential hazards. Two sets of experiments were performed using a modified approach to the Environmental Protection Agency (EPA) SW-846 Method 1040. In the first set of experiments (scoping studies), the purpose was to determine the relative strength of some selected oxidizers. In the second set of experiments, the potential of the strongest tested oxidizer to increase the burning rate or burning intensity of some selected sorbents was investigated. The overall goal of this work was to conservatively identify oxidizer/sorbent mixtures producing non-oxidizer results. A few results from this experimental study are presented herein. More exhaustive information on this work can be found in supporting documentation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

3D Virtual Simulation for Radiation Safety and Hazards Identification Training

This presentation will be presented at CAES codebreaker session on May 4th. The slides include two projects that demonstrate how virtual training can benefit from visualization technology. One is a collaboration project between the Applied Visualization Laboratory and College of Eastern Idaho for radiation safety and survey training. The other one is Idaho National Laboratory's hazards identification online training that utilized LiDAR technology.

99 GENERAL AND MISCELLANEOUS↗

User-Centered Software Design in the All Hazards Analysis Application

To design good software, you must always keep the end user in mind. Some benefits of incorporating the user-centered design process include saving users time and effort and helping them to utilize all capabilites of an application. In my work on the All Hazards Analysis (AHA) application, I employed principles of user-centered design to make the application easier for new users to navigate. This poster describes user-centered software design in general and showcases some of my user-centered design work on the AHA application.

58 GEOSCIENCES↗

"Criticality HaZoP": Efficiently Evaluating Hazards of New or Revised Criticality Safety Evaluations

The "Criticality HazOp" technique, as developed at Hanford's Plutonium Finishing Plant (PFP), has allowed for efficiencies enabling shortening of the time necessary to complete new or revised criticality safety evaluation reports (CSERs). For example, in the last half of 2007 at PFP, CSER revisions undergoing the "Criticality HazOp" process were completed at a higher rate than previously achievable. The efficiencies gained through use of the "Criticality HazOp" process come from the preliminary narrowing of potential scenarios for the Criticality analyst to fully evaluate in preparation of the new or revised CSER, and from the use of a systematized "Criticality HazOp" group assessment of the relevant conditions to show which few parameter/condition/deviation combinations actually require analytical effort. The "Criticality HazOp" has not only provided efficiencies of time but has brought to criticality safety evaluation revisions the benefits of a structured hazard evaluation method and the enhanced insight that may be gained from direct involvement of a team in the process. In addition, involved personnel have gained a higher degree of confidence and understanding of the resulting CSER product.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Volcanic lightning and plume behavior reveal evolving hazards during the April 2015 eruption of Calbuco Volcano, Chile

Soon after the onset of an eruption, model forecasts of ash dispersal are used to mitigate the hazards to aircraft, infrastructure, and communities downwind. However, it is a significant challenge to constrain the model inputs during an evolving eruption. Here we demonstrate that volcanic lightning may be used in tandem with satellite detection to recognize and quantify changes in eruption style and intensity. Using the eruption of Calbuco volcano in southern Chile on 22 and 23 April 2015, we investigate rates of umbrella cloud expansion from satellite observations, occurrence of lightning, and mapped characteristics of the fall deposits. Our remote sensing analysis gives a total erupted volume that is within uncertainty of the mapped volume (0.56 ± 0.28 km3 bulk). Furthermore, observations and volcanic plume modeling further suggest that electrical activity was enhanced both by ice formation in the ash clouds >10 km above sea level and development of a low-level charge layer from ground-hugging currents.

58 GEOSCIENCES↗

Anthropogenic effects on flood hazards in a hyper-arid watershed: The 2015 Atacama floods

An unprecedented precipitation event in the hyper-arid Atacama Desert of Northern Chile occurred in March 2015. Geomorphic alterations to the river channel and the coastal zone, coupled with the exceptional magnitude of the rainfall, caused catastrophic damage and loss of life. On the coast of the El Salado watershed, legacy mine tailings infilled the watershed-ocean connection, while the river channel was altered both by tailings and urbanization. The consequences of this event resulted from the coupling of anthropogenic geomorphic changes with an unusual climate event. Lack of field data, complex geomorphology and sediment loads influenced by human activity make analysing floods in these regions especially challenging. The objective of this work is to improve our understanding of the factors that control flood hazards by using numerical simulations to reconstruct the 2015 flood in El Salado. We carry out unsteady two-dimensional simulations fully coupled with the sediment concentration to identify the influence of tailing deposits, considering high-resolution data of the pre- and post-2015 flood topography. In conclusion, the results highlight the importance of specific event-based studies, using models that can help designing better strategies for climate change adaptation and risk mitigation, while providing information for risk reduction and channel restoration.

54 ENVIRONMENTAL SCIENCES↗

A Novel Eco-Biosorbent for Decontamination of Hazardous Dye from Aqueous Medium

A novel multi-component biosorbent consisted of pine, oak, hornbeam and fir sawdust biomasses was used to eliminate a common hazardous dye (Malachite green, MG) from aqueous solution. The influences of different parameters like solution pH, biosorbent amount, dye concentration and contact time on the removal process were thoroughly studied to evaluate optimum biosorption conditions. The pseudo-first-order, pseudo-second-order, Elovich, logistic and intra-particle diffusion models were used to describe the biosorption kinetics. Logistic model represented the kinetic experimental data well. The experimental equilibrium biosorption data were analyzed by Freundlich, Langmuir and Dubinin–Radushkevich isotherms. Freundlich model fitted better with the experimental data compared to others. In addition, the mean free energy obtained from Dubinin–Radushkevich model and the standard Gibbs free energy change indicated that the nature of biosorption was feasible, spontaneous and physical type. Overall, the novel eco-biosorbent could be used as a promising biosorbent to remove such unsafe dye molecules from aqueous environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗