Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GaSe”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Effects of systematic errors on the mixing ratios of trace gases obtained from occulation spectra

The influence of systematic errors in the parameters of the models describing the geometry and the atmosphere on the profiles of trace gases retrieved from simulated solar occultation spectra, collected at satellite altitudes, is investigated. Because of smearing effects and other uncertainties, it may be preferable to calibrate the spectra internally by measuring absorption lines of an atmospheric gas such as CO2 whose vertical distribution is assumed rather than to relay on externally supplied information.

Shaffer, W. A.↗

Aerodynamic features of flames in premixed gases

A variety of experimentally established flame phenomena in premixed gases are interpreted by relating them to basic aerodynamic properties of the flow field. On this basis the essential mechanism of some well known characteristic features of flames stabilized in the wake of a bluff-body or propagating in ducts are revealed. Elementary components of the flame propagation process are shown to be: rotary motion, self-advancement, and expansion. Their consequences are analyzed under a most strict set of idealizations that permit the flow field to be treated as potential in character, while the flame is modelled as a Stefan-like interface capable of exerting a feed-back effect upon the flow field. The results provide an insight into the fundamental fluid-mechanical reasons for the experimentally observed distortions of the flame front, rationalizing in particular its ability to sustain relatively high flow velocities at amazingly low normal burning speeds.

Oppenheim, A. K.↗

Deposition of Na2SO4 from salt-seeded combustion gases of a high velocity burner rig

The mechanism of deposition of Na2SO4 was studied under controlled laboratory conditions and the results have been compared to a recently developed comprehensive theory of vapor deposition. Thus Na2SO4, NaCl, NaNO3 and simulated sea salt solutions were injected into the combustor of a nominal Mach 0.3 burner rig burning jet fuel at constant fuel/air ratios. The deposits formed on inert collectors, rotation in the cross flow of the combustion gases, were weighed and analyzed. Collector temperature was uniform and could be varied over a large range by internal air cooling. Deposition rates and dew point temperatures were determined. Supplemental testing included droplet size measurements of the atomized salt solutions. These tests along with thermodynamic and transport calculations were utilized in the interpretation of the deposition results.

Santoro, G. J.↗

Stimulated Rayleigh-Brillouin gain spectroscopy in pure gases

Stimulated Rayleigh-Brillouin gain spectra of pure gases are reported. Stimulated Rayleigh scattering is now clearly distinguishable from stimulated Brillouin scattering without the aid of induced absorption. As examples, spectral line shapes of Ar and SF6 at various pressures and the associated gain asymmetry are discussed. Potential applications of coherent Rayleigh-Brillouin spectroscopy are suggested.

She, C. Y.↗

El Chichon - Composition of plume gases and particles

Aircraft measurements were made of trace gases, atmospheric particles, and condensed acid volatiles in the plume of El Chichon volcano, Chiapas, Mexico, in November 1982. Hydrogen sulfide was the primary gaseous sulfur species in the plume at the time of collection. Concentrations of 28 elements were determined by neutron activation analysis of particulate material from the plume. The volatile elements sulfur, chlorine, arsenic, selenium, bromine, antimony, iodine, tungsten, and mercury were enriched relative to bulk pyroclastic material by factors of 60 to 20,000. Arsenic, antimony, and selenium were associated predominantly with small (not greater than 3 micrometer) particles. Calcium and sodium were present almost exclusively on larger particles and aluminum and manganese were bimodally distributed. Ashladen particulate material injected into the stratosphere during the early violent eruptions was enriched by factors of 10 to 30 relative to ash in some of the same elements observed in the quiescent plume.

Kotra, J. P.↗

Effects of systematic errors on the mixing ratios of trace gases obtained from occultation spectra

The influence of systematic errors in the parameters of the models describing the geometry and the atmosphere on the profiles of trace gases retrieved from simulated solar occultation spectra, collected at satellite altitudes, is investigated. Because of smearing effects and other uncertainties, it may be preferable to calibrate the spectra internally by measuring absorption lines of an atmospheric gas such as CO2 whose vertical distribution is assumed rather than to rely on externally supplied information.

Shaffer, W. A.↗

Production and condensation of organic gases in the atmosphere of Titan

The rates and altitudes for the dissociation of atmospheric constituents on Titan are calculated for solar ultraviolet radiation, the solar wind, Saturn magnetospheric particles, the Saturn co-rotating plasma, and cosmic rays. Laboratory experiments show that a variety of simple gas phase organic molecules and more complex organic solids called tholins are produced by such irradiations of simulated Titanian atmospheres. Except for ultraviolet wavelengths longward of the methane photodissociation continuum, most dissociation events occur between about 3100 and 3600 km altitude, corresponding well to the region of EUV opacity detected by Voyager. For a wide variety of simple to moderately complex organic gases in the Titanian atmosphere, condensation occurs below the top of the main cloud deck at about 2825 km. It is proposed that such condensates, begining with CH4 at about 2615 km comprise the principal mass of the Titan clouds. There is a distinct tendency for the atmosphere of Titan to act as a fractional distillation device, molecules of greater complexity condensing out at higher altitudes.

Sagan, C.↗

Monitoring Trace Gases in the Atmosphere

Tunable laser spectrometer uses reflections from ordinary objects. Topographic target (ordinary feature of surroundings) returns enough energy to receiver so absorption by trace gases detected. Chopping laser beam allows return to be compared with original signal. Amplifier locks in on chopping frequency or laser modulation frequency. In laboratory simulations, spectrometer detected nitrogen dioxide in concentrations of only few parts per million.

Webster, C. R.↗

Quasi non-intrusive sampling and analysis of gases associated with the boundary layer on the tethered satellite and similar supersonic and hypersonic research vehicles

The effect that one candidate inlet, an assembly of capillary openings in a thin glass plate (a multichannel plate), might have on the overall sampling process is considered. The flow characteristics of the plate, under a variety of conditions of external pressure and mass flow, is evaluated. A review of capillary flow theory is presented with some development of the pertinent equations. The predicted mass flow will be compared to that determined perimentally to assess the effect that mass flow through one capillary might have upon a neighboring capillary. Mass spectrometric measurements of mixtures flowing through the multichannel plate (MCP) is also considered. In the first part of the experiments, the flow was in a direction normal to the surface of the plate. The experimental gases were Argon and mixtures of carbon dioxide in air. Ongoing experiments are discussed which are conducted with the flow parallel to the surface of the plate, a simulation of the kind of flow that a flight vehicle would experience.

Fishel, C.↗

FTIR-spectrometer-determined absorption coefficients of seven hydrazine fuel gases - Implications for laser remote sensing

The absorption spectra of three hydrazines and four of their air-oxidation products were measured in the 9-12-micron spectral region with a Fourier transform infrared (FTIR) spectrometer with a 0.05-kayser resolution to determine absorption coefficients at CO2 and tunable diode laser wavelengths. The measurements agreed well with published CO2 laser determinations for many of the absorption coefficients, except where the published values are thought to be in error. The coefficients were then used to estimate the sensitivity for remote detection of these gases using CO2 and tunable diode lasers in long-path differential absorption measurements.

Molina, L. T.↗

Trapping of xenon in ice - Implications for the origin of the earth's noble gases

Although the earth's atmosphere contains Ne, Ar, and Kr in about C1,2-chondrite proportions, Xe is depleted about 20-fold. To test the suggestion that the 'missing' Xe is trapped in Antarctic ice, distribution coefficients for Xe in artifically formed frost at -20 to -60 C were measured, using Xe-127 tracer. The values are 0.098 + or - 0.004 cc STP/g atm for trapping and less than 5 cc STP/g atm for trapping plus adsorption. If these results are representative of natural ice, then the Antarctic ice cap contains less than 1 percent of the atmospheric Xe inventory, or not greater than about 0.001 the amount needed for a C1,2-chondrite pattern. Two possibilities remain for the 'missing' Xe, both on the premise that the earth's noble gases, along with other volatiles, came from chondritic material: (1) xenon is preferentially retained in the mantle and lower crust, due to the strong affinity of Xe for clean silicate surfaces and amorphous carbon; and (2) the source material of the earth's volatiles had high, relatively unfractionated, Ar/Xe and Kr/Xe ratios, like the non-carbonaceous noble gas carriers in C3O and E-chondrites.

Wacker, J. F.↗

High sensitivity detection of trace gases at atmospheric pressure using tunable diode lasers

A detailed study of the detection of trace gases at atmospheric pressure using tunable diode lasers is described. The influence of multipass cells, retroreflectors and topographical targets is examined. The minimum detectable infrared absorption ranges from 0.1 percent for a pathlength of 1.2 km to 0.01 percent over short pathlengths. The factors which limit this sensitivity are discussed, and the techniques are illustrated by monitoring atmospehric CO2 and CH4.

Reid, J.↗

Laboratory simulation of meteoritic noble gases. I - Sorption of xenon on carbon: Trapping experiments

The sorption of Xe-127 at 5 x 10 to the -7th atm onto carbon black, pyrolyzed polyvinylidene chloride, and pyrolyzed acridine at 100-1000 C for 5 min-240 h is measured experimentally by gamma spectrometry. The results are presented in tables and graphs and characterized in detail. The tightly bound Xe remaining in the samples after 4000 min pumping at temperatures above 100 C is found to comprise two components: a low-temperature component attributed to physisorption within an atomic-scale labyrinth of micropores, and a high-temperature component due to volume diffusion. The implications for the trapping of noble gases near grain surfaces of amorphous carbon in meteorites are considered.

Wacker, J. F.↗

Polarization (ellipsometric) measurements of liquid condensate deposition and evaporation rates and dew points in flowing salt/ash-containing combustion gases

An application of an optical polarization technique in a combustion environment is demonstrated by following, in real-time, growth rates of boric oxide condensate on heated platinum ribbons exposed to seeded propane-air combustion gases. The results obtained agree with the results of earlier interference measurements and also with theoretical chemical vapor deposition predictions. In comparison with the interference method, the polarization technique places less stringent requirements on surface quality, which may justify the added optical components needed for such measurements.

Seshadri, K.↗

The production of trace gases by photochemistry and lightning in the early atmosphere

Recent atmospheric calculation suggest that the prebiological atmosphere was most probably composed of nitrogen, carbon dioxide, and water vapor, resulting from volatile outgassing, as opposed to the older view of a strongly reducing early atmosphere composed of methane, ammonia, and hydrogen. Photochemical calculations indicate that methane would have been readily destroyed via reaction with the hydroxyl radical produced from water vapor and that ammonia would have been readily lost via photolysis and rainout. The rapid loss of methane and ammonia, coupled with the absence of a significant source of these gases, suggest that atmospheric methane and ammonia were very short lived, if they were present at all. An early atmosphere of N2, CO2, and H2O is stable and leads to the chemical production of a number of atmospheric species of biological significance, including oxygen, ozone, carbon monoxide, formaldehyde, and hydrogen cyanide. Using a photochemical model of the early atmosphere, the chemical productionof these species over a wide range of atmospheric parameters were investigated. These calculations indicate that early atmospheric levels of O3 were significantly below the levels needed to provide UV shielding. The fate of volcanically emitted sulfur species, e.g., sulfur dioxide and hydrogen sulfide, was investigated in the early atmosphere to assess their UV shielding properties. The photochemical calculations show that these species were of insufficient levels, due in part to their short photochemical lifetimes, to provide UV shielding.

Levine, J. S.↗

Raman spectroscopy of gases with a Fourier transform spectrometer - The spectrum of D2

Fourier transform spectrometry (FTS) is presently used to record the spontaneous incoherent laser Raman spectra of gases. The high resolution, sensitivity, calibration accuracy and spectral coverage achieved demonstrate the viability of FTS for Raman spectroscopy. Attention is given to the coefficients obtained by fitting measurements obtained from the spectrum of D2, containing both v = 0-0 and 1-0 transitions, to the Dunham (1932) expansion of the vibration-rotation energy levels.

Jennings, D. E.↗

Role of minerals in the thermal alteration of organic matter. I - Generation of gases and condensates under dry condition

Pyrolysis experiments conducted at 200 and 300 C on kerogen and bitumen from the Monterey formation and on the Green River Formation kerogen with montmorillonite, illite, and calcite added are described. The pyrolysis products are identified and gas and condensate analyses are performed. A catalytic effect is detected in the pyrolysis of kerogen with montmorillonite; however, illite and calcite display no catalytic activity. The increased production of C1-C6 hydrocarbons and the dominance of branched hydrocarbons in the C4-C6 range reveals a catalytic influence. It is observed that the catalysis of montmorillonite is greater during bitumen pyrolysis than for kerogen, and catalysis with minerals affects the production of CO2. It is concluded that a mineral matrix is important in determining the type and amount of gases and condensates forming from organic matter under thermal stress.

Tannenbaum, E.↗

Foliage plants for indoor removal of the primary combustion gases carbon monoxide and nitrogen dioxide

Foliage plants were evaluated for their ability to sorb carbon monoxide and nitrogen dioxide, the two primary gases produced during the combustion of fossil fuels and tobacco. The spider plant (Chlorophytum elatum var. vittatum) could sorb 2.86 micrograms CO/sq cm leaf surface in a 6 h photoperiod. The golden pothos (Scindapsus aureus) sorbed 0.98 micrograms CO/sq cm leaf surface in the same time period. In a system with the spider plant, greater than or equal to 99 percent of an initial concentration of 47 ppm NO2 could be removed in 6 h from a void volume of approximately 0.35 cu m. One spider plant potted in a 3.8 liter container can sorb 3300 micrograms CO and effect the removal of 8500 micrograms NO2/hour, recognizing the fact that a significant fraction of NO2 at high concentrations will be lost by surface sorption, dissolving in moisture, etc.

Wolverton, B. C.↗