Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Full core”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Rescue Shuttle Flight Re-Entry: Controlling Astronaut Thermal Exposure

A rescue mission for the STS-125 Hubble Telescope Repair Mission requires reentry from space with 11 crew members aboard, exceeding past cabin thermal load experience and risking crew thermal stress potentially causing cognitive performance and physiological decrements. The space shuttle crew cabin air revitalization system (ARS) was designed to support a nominal crew complement of 4 to 7 crew and 10 persons in emergencies, all in a shirt-sleeve environment. Subsequent to the addition of full pressure suits with individual cooling units, the ARS cannot maintain a stable temperature in the crew cabin during reentry thermal loads. Bulk cabin thermal models, used for rescue mission planning and analysis of crew cabin air, were unable to accurately represent crew workstation values of air flow, carbon dioxide, and heat content for the middeck. Crew temperature models suggested significantly elevated core temperatures. Planning for an STS-400 potential rescue of seven stranded crew utilized computational fluid dynamics (CFD) models to demonstrate inhomogeneous cabin thermal properties and improve analysis compared to bulk models. In the absence of monitoring of crew temperature, heart rate, metabolic rate and incomplete engineering data on the performance of the integrated cooling garment/cooling unit (ICG/CU) at cabin temperatures above 75 degrees F, related systems & models were reevaluated and tests conducted with humans in the loop. Changes to the cabin ventilation, ICU placement, crew reentry suit-donning procedures, Orbiter Program wave-off policy and post-landing power down and crew extraction were adopted. A second CFD and core temperature model incorporated the proposed changes and confirmed satisfactory cabin temperature, improved air distribution, and estimated core temperatures within safe limits. CONCLUSIONS: These changes in equipment, in-flight and post-landing procedures, and policy were implemented for the STS-400 rescue shuttle & will be implemented in any future rescue flights from the International Space Station of stranded shuttle crews.

Gillis, David B.↗
NASA NTRS2010

A Nonlinear Dynamic Inversion Predictor-Based Model Reference Adaptive Controller for a Generic Transport Model

Presented here is a Predictor-Based Model Reference Adaptive Control (PMRAC) architecture for a generic transport aircraft. At its core, this architecture features a three-axis, non-linear, dynamic-inversion controller. Command inputs for this baseline controller are provided by pilot roll-rate, pitch-rate, and sideslip commands. This paper will first thoroughly present the baseline controller followed by a description of the PMRAC adaptive augmentation to this control system. Results are presented via a full-scale, nonlinear simulation of NASA s Generic Transport Model (GTM).

Campbell, Stefan F.↗
NASA NTRSDate not supplied

NASA LaRC Contribution to the High Angle Working Group of the Third Aeroelastic Prediction Workshop: BSCW Shock Buffet

FUN3D Core Capabilities - Established as a research code in late 1980s; now supports numerous internal and external efforts across the speed range - Solves 2D/3D steady and unsteady Euler and RANS equations on node-based mixed element grids for compressible and incompressible flows - General dynamic mesh capability: any combination of rigid / overset / morphing grids, including 6-DOF effects - Aeroelastic modeling using mode shapes, full FEM, etc. - Constrained / multipoint adjoint-based design and mesh adaptation - Distributed development team using agile/extreme software practices including 24/7 regression, performance testing - Capabilities fully integrated, online documentation, training videos, tutorials

Pawel Chwalowski↗
DOE OSTI2021

Helicon full-wave modeling with scrape-off-layer turbulence on the DIII-D tokamak

Helicon waves have been recently proposed as an off-axis current drive actuator due to their expected high current drive efficiency in the mid-radius region in high beta tokamaks. This paper focuses on a numerical study to better understand effects of scrape-off-layer (SOL) turbulence on helicon wave propagation and absorption on the DIII-D tokamak using a recently developed helicon full-wave model with turbulent density inputs from synthetic single wavelength SOL turbulence and first-principles HERMES multi-wavelength turbulence models. With both input turbulence models, three key effects are observed: the helicon wave can scatter to undesirable locations in the plasma, large helicon wave electric fields can form in localized regions near the SOL turbulence, and the helicon wave can mode convert to slow waves in the SOL. This is shown to cause helicon wave refraction to undesirable locations and strong helicon wave absorption in the SOL resulting in significantly less helicon wave power in the core plasma. Using synthetic SOL turbulence, the simulations additionally show that high amplitudes and long wavelengths greater than a few cm on average have the largest effect on modifying the helicon wave propagation and absorption; the modeling predicts, for example, that approximately 60% of helicon power can be absorbed in the SOL for $\tilde{n}$ /n ~ 0.8 and lambda_perp ~ 0.05 m. Here, several potential physical mechanisms that may explain the interaction of helicon waves with SOL turbulence in these simulations are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Carbon fiber synthesis from pitch: Insights from ReaxFF based molecular dynamics simulations

Despite the potential to lowering fabrication costs of pitch-based carbon fiber (CF) compared to polyacrylonitrile-based CF, large scale utilization is currently limited by the complexity in manufacturing. This is mainly due to the lack of consistency between the pitch structure/chemistry and CF properties under different processing conditions. Here, we employed full atomistic simulations based on reactive force fields to investigate the conversion of pitch precursors to CFs. Additionally, it was found that at the carbonization stage, the consumption rates of precursors, gas formations, and solid yields (carbonized CFs) are all dependent on the composition and arrangement of molecular moieties in the precursor. Specifically, precursors with sp 3 carbons in the cata-condensed core area have limited decomposition pathways (i.e., limited reaction sites), which leads to the formation of carbonized CFs with similar compositions. Furthermore, carbonized CFs possess distinct structural characteristics, and finally lead to the formation of CFs with different moduli. By analyzing CF crystallinity and elemental composition, general rationales are proposed for the selection of optimal precursors and processing conditions, and thus shed lights on parameter screening during industrial CF synthesis. For instance, inclusion of sp 3 carbons in cata- condensed rings can be preferred over the presence of sp 3 carbons on side chains.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2023

Addressing the pervasive scarcity of structural annotation in eukaryotic algae

Abstract Despite a continuous increase in algal genome sequencing, structural annotations of most algal genome assemblies remain unavailable. This pervasive scarcity of genome annotation has restricted rigorous investigation of these genomic resources and may have precipitated misleading biological interpretations. However, the annotation process for eukaryotic algal species is often challenging as genomic resources and transcriptomic evidence are not always available. To address this challenge, we benchmark the cutting-edge gene prediction methods that can be generalized for a broad range of non-model eukaryotes. Using the most accurate methods selected based on high-quality algal genomes, we predict structural annotations for 135 unannotated algal genomes. Using previously available genomic data pooled together with new data obtained in this study, we identified the core orthologous genes and the multi-gene phylogeny of eukaryotic algae, including of previously unexplored algal species. This study not only provides a benchmark for the use of structural annotation methods on a variety of non-model eukaryotes, but also compensates for missing data in the current spectrum of algal genomic resources. These results bring us one step closer to the full potential of eukaryotic algal genomics.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Hall coefficient and resistivity in the doped bilayer Hubbard model

Finding and understanding non-Fermi-liquid transport behaviors are at the core of condensed matter physics. Most of the existing studies in this field were devoted to the monolayer Hubbard model, which is the minimal model that captures the essential features of high-temperature superconductivity. Here, we discover another type of non-Fermi-liquid behavior emergent in the hole-doped bilayer Hubbard model, using dynamical mean-field theory with a full consideration of the short-range interlayer electron correlation. We find that at low temperatures, the Hall coefficient has a strong nonmonotonic dependence on temperature, leading to a double or quadruple reversal of its sign depending on the doping level. At the same time, the resistivity exhibits two plateaus rather than linearity in its temperature dependence. Finally, we show that these intriguing transport behaviors stem from the formation of coherent interlayer singlets, which scatter off gapped collective modes arising from short-range interlayer antiferromagnetic fluctuations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

ZPPR-15 Criticality Measurements

A reference critical configuration was established for each phase of the ZPPR-15 experimental program. The reference critical configuration for each phase corresponds to a configuration in which the measured excess reactivity was adjusted to a standard set of reporting conditions with an average reactor temperature of 293 K, a zero interface gap and all operational control rods parked 30 inches from the axial centerline of the core. The ZPPR staff published the measured excess reactivity and the statistical uncertainty in the measurement. In reality, the published uncertainty for each reference critical configuration is only a small component of the total uncertainty for that configuration. Additional uncertainties related measurement technique, configuration geometry and material compositions exist. The geometry and material composition uncertainties are the dominant uncertainties for ZPPR-15. A full uncertainty analysis was performed for each ZPPR-15 reference critical configuration. The significant uncertainties related to measurement technique, configuration geometry and material compositions were quantified, and a total uncertainty was derived for each reference critical configuration. The ZPPR-15 experimental records were used to create detailed as-built Monte Carlo models for the reference critical configurations established in ZPPR-15A loading 15, ZPPR-15B loading 88, ZPPR-15C loading 166 and ZPPR-15D loading 185. The as-built models neglect the small, non-uniform gap between matrix halves at full closure, any structures outside the matrix tubes and minor components, e.g., impurities, in some materials. The biases associated with the neglected items were quantified. The experimental value of keff and its associated uncertainty for each reference critical configuration were adjusted to account for biases introduced by items that are neglected in the as-built model for that configuration.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
NASA NTRS1989

Low power consumption current transducer

A low power consumption current transducer utilizes a saturable core reactor which includes a pair of opposed gate windings and a control winding. The control winding of the saturable reactor is arranged to receive the current to be measured. A square wave generator is connected to the gate winding of the transformer connected across the square wave generator and the secondary connected in series with the gate windings of the reactor. A full wave rectifier is connected to the gate windings and a resistor is connected across the rectifier to provide a DC voltage to cross it representative of the current flow through the control winding. A DC power supply is provided to supply power to the square wave voltage source. A diode is connected between each end of the primary winding of the transformer and one polarity of the DC power supply to commutate the reactive current resulting from the counter emf generated in the reactor back to the DC supply to eliminate potentially damaging reactive voltage spikes which would otherwise appear at the output of the square wave generator and conserve energy.

W T McLyman↗
NASA NTRS1994

Molecular abundances and low-mass star formation. 1: Si- and S-bearing species toward IRAS 16293-2422

Results from millimeter and submillimeter spectral line surveys of the protobinary source Infrared Astronomical Satellite (IRAS) 16293-2422 are presented. Here we outline the abundances of silicon- and sulfur-containing species. A combination of rotation diagram and full statistical equilibrium/radiative transfer calculations is used to constrain the physical conditions toward IRAS 16293 and to construct its beam-averaged chemical composition over a 10 to 20 sec (1600 to 3200 AU) scale. The chemical complexity as judged by species such as SiO, OCS, and H2S, is intermediate between that of dark molecular clouds such as L134N and hot molecular cloud cores such as Orion KL. From the richness of the spectra compared to other young stellar objects of similar luminosity, it is clear that molecular abundances do not scale simply with mass; rather, the chemistry is a strong function of evolutionary state, i.e., age.

Blake, Geoffrey A.↗
NASA NTRSDate not supplied

TPSAS-NF1676L-14454-DND

FUN3D Core Capabilities - Established as a research code in late 1980’s; now supports numerous internal and external efforts across the speed range - Solves 2D/3D steady and unsteady Euler and RANS equations on node-based mixed element grids for compressible and incompressible flows - General dynamic mesh capability: any combination of rigid / overset / morphing grids, including 6-DOF effects - Aeroelastic modeling using mode shapes, full FEM, CC, etc. - Constrained / multipoint adjoint-based design and mesh adaptation - Distributed development team using agile/extreme software practices including 24/7 regression and performance testing - Capabilities fully integrated, online documentation, training videos, tutorials

Eric J Nielsen↗
DOE OSTI2021

Optimization Methodology of Pebble Bed HTGR Start-Up and Running-in Strategy

In recent years interest in advanced reactor technologies has increased significantly. However, the methods used for analysis of traditional nuclear reactors are insufficient to consider all the different and varied advanced reactor designs without further development. One promising advanced reactor design is the pebble bed reactor (PBR). PBRs possess unique operational and fuel cycle features that require the development of specific analysis methodologies to adequately design and analyze the systems. There is a need in PBR research for a capability to analyze and optimize the process of transitioning from the start-up reactor core to the equilibrium core (known as the “running-in” of the reactor). The start-up of a PBR and the transition to the equilibrium core is a complex, multi-physics challenge that has not yet been well researched and has many opportunities for design, analysis, and optimization of the process. In this research, a methodology is defined to consider the potential strategies in PBR start-up and run-in to the equilibrium core. Multiple candidate software are considered, and their pros and cons are discussed for the PBR-specific application in the methodology. A preliminary software selection for the physics engine is made, and initial verification of key modules is performed. Software to support optimization of the reactor run-in strategies through reduced order modeling (ROM) and machine learning are considered. Challenges for a full implementation of the methodology are discussed. Additional code selections and verification of models relevant to the application are needed before full demonstration of the methodology can be achieved and an optimal strategy determined.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

An ultrahigh-resolution E3SM land model simulation framework and its first application to the Seward Peninsula in Alaska

The availability of supercomputers and state-of-science datasets has made it possible to conduct large-scale land simulations at an ultrahigh-resolution. This study reported a computational framework for land surface simulation using the E3SM land model (ELM) at an unprecedented resolution (1 km x 1 km gridcell). The ultrahigh-resolution ELM (uELM) simulation framework includes three parts: (1) high-resolution atmospheric forcing and surface properties dataset generation, (2) massive gridcell-based simulation, and (3) large-scale simulation results analysis. Additionally, we implemented the uELM simulation framework and completed the first 1 km x 1 km terrestrial ecosystem simulation (from 1850 to 2014) over the Seward Peninsula in Alaska (78,000 km 2 ). The experiment contained two phases: a spin-up simulation and a transient simulation, and required five weeks of calculations using 320 cores in a 44-node Linux HPC computer. It created approximately 1.3 TB of data from the transient simulation alone (1850 - present). We selected sample results (monthly and daily simulation outputs) to illustrate the temporal and spatial variations of several variables in high-latitude Arctic ecosystems’ water, energy, and carbon cycles. At last, we summarized the lessons learned and proposed new developments for full-scale uELM simulations over the entire North American continent (approximately 22,000,000 km 2 ).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Nanosynthesis by atmospheric arc discharges excited with pulsed-DC power: a review

Plasma technology is actively used for nanoparticle synthesis and modification. All plasma techniques share the ambition of providing high quality, nanostructured materials with full control over their crystalline state and functional properties. Pulsed-DC physical/chemical vapour deposition, high power impulse magnetron sputtering, and pulsed cathodic arc are consolidated low-temperature plasma processes for the synthesis of high-quality nanocomposite films in vacuum environment. However, atmospheric arc discharge stands out thanks to the high throughput, wide variety, and excellent quality of obtained stand-alone nanomaterials, mainly core–shell nanoparticles, transition metal dichalcogenide monolayers, and carbon-based nanostructures, like graphene and carbon nanotubes. Unique capabilities of this arc technique are due to its flexibility and wide range of plasma parameters achievable by modulation of the frequency, duty cycle, and amplitude of pulse waveform. The many possibilities offered by pulsed arc discharges applied on synthesis of low-dimensional materials are reviewed here. Periodical variations in temperature and density of the pulsing arc plasma enable nanosynthesis with a more rational use of the supplied power. Parameters such as plasma composition, consumed power, process stability, material properties, and economical aspects, are discussed. Lastly a brief outlook towards future tendencies of nanomaterial preparation is proposed. Atmospheric pulsed arcs constitute promising, clean processes providing ecological and sustainable development in the production of nanomaterials both in industry and research laboratories.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

A Hybrid Heavy Duty Diesel Power System for Off-Road Applications—Concept Validation

A multiyear power system R&D program was completed with the objective of developing an off-road hybrid heavy duty diesel engine with front end accessory drive-integrated energy storage. This system was validated to deliver 10.5–25.6% reduction in fuel consumption over current Tier 4 Final-based 18L diesel engines, over various off-road machine application cycles. The power system consisted of a downsized heavy-duty diesel 13L engine containing advanced combustion technologies, capable of elevated peak cylinder pressures and thermal efficiencies, thermal barrier coatings, exhaust waste heat recovery via SuperTurbo™ turbocompounding, and hybrid energy assisting and recovery through both mechanical and electrical systems. Following the concept definition, design, and analysis phases of the program, the final phase focused on building and validating the performance and efficiency in laboratory tests. While aspects of the system such as start/stop and reduced off-road cooling package energy losses were only analytically evaluated, the main 13L concept engine with full hybrid system was successfully built and tested in steady-state and in transient certification and real-world application cycles. Extensive simulations in Caterpillar's DYNASTY™ software environment utilized the validation test data to assess performance more fully and confidently over varied cycles and strategies. An average fuel consumption reduction of 17.9% was realized, and the majority (~13%) of the benefit stemmed from the core concept 13L engine. In conclusion, a total cost of ownership analysis provides context to commercial viability and where adoption focus should be placed.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

Celeritas R&D Report: Accelerating Geant4

Celeritas is a new Monte Carlo (MC) detector simulation code designed for computationally intensive applications on high-performance heterogeneous architectures. In the past two years Celeritas has advanced from prototyping a Graphics Processing Unit (GPU)-based single physics model in infinite medium to implementing a full set of electromagnetic (EM) physics processes in complex geometries. The current release of Celeritas, version 0.4, has incorporated full device-based navigation, an event loop in the presence of magnetic fields, and detector hit scoring. New functionality incorporates a scheduler to offload electromagnetic physics to the GPU within a Geant4-driven simulation, enabling straightforward integration of Celeritas into the high energy physics (HEP) experimental frameworks CMSSW and ATLAS FullSimLight. On the Perlmutter supercomputer, Celeritas performs EM physics between 3× and 18× faster using the machine’s Nvidia GPUs compared to using only CPUs, corresponding to an electrical power efficiency up to a factor of 5. When running a multithreaded Geant4 ATLAS test beam application with full hadronic physics, using Celeritas to accelerate the EM physics results in an overall simulation speedup of 1.7–2.2× on GPU and 1.2× on CPU. In a CMS test application using tt¯ events and the prototype Run 4 configuration, compared to Geant4 CPU, Celeritas with a Nvidia A100 improves overall throughput up to a factor of 2.7× but cannot be efficiently shared with more than 8 cores.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Microbial Analysis of 100-N Borehole Samples: Estimation of Diesel and BTEX Degrading Bacterial Populations

Historical unplanned releases at the UPR-100-N-17 166-N Diesel Oil Supply Line Leak waste site located within the 100-NR-1 OU resulted in diesel fuel contamination of the unsaturated vadose zone and site groundwater. Enhanced in situ bioremediation of the deep vadose zone was the final remedy decision for the 100-NR-1 Operable Unit (OU) and the full-scale bioventing demo began in 2012. For this remedy, oxygen is actively supplied to the deep vadose zone to stimulate aerobic hydrocarbon degrading microorganisms to metabolize petroleum contamination. Degradation rate calculations based on vadose zone respirometry measurements, however, have indicated declining activity over recent years, though the precise reason for this apparent decline has not been determined. In this investigation 100-NR-1 OU sediment cores were analyzed for total microbial biomass, as well as enumeration of diesel and BTEX degrading bacteria to determine if these microbial populations have declined relative to previous measurements taken in 2009.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗