Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLUID MECHANICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Optimal sampling efficiency in Monte Carlo sampling with an approximate potential

Building on the work of Iftimie et al., Boltzmann sampling of an approximate potential (the 'reference' system) is used to build a Markov chain in the isothermal-isobaric ensemble. At the endpoints of the chain, the energy is evaluated at a higher level of approximation (the 'full' system) and a composite move encompassing all of the intervening steps is accepted on the basis of a modified Metropolis criterion. For reference system chains of sufficient length, consecutive full energies are statistically decorrelated and thus far fewer are required to build ensemble averages with a given variance. Without modifying the original algorithm, however, the maximum reference chain length is too short to decorrelate full configurations without dramatically lowering the acceptance probability of the composite move. This difficulty stems from the fact that the reference and full potentials sample different statistical distributions. By manipulating the thermodynamic variables characterizing the reference system (pressure and temperature, in this case), we maximize the average acceptance probability of composite moves, lengthening significantly the random walk between consecutive full energy evaluations. In this manner, the number of full energy evaluations needed to precisely characterize equilibrium properties is dramatically reduced. The method is applied to a model fluid, but implications for sampling high-dimensional systems with ab initio or density functional theory (DFT) potentials are discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Plasma Physics found in JT-60 Tokamak over the Last 20 years

This paper summarizes major plasma physics obtained during the period of JT-60 operation for 23 years with special emphasis on research towards steady-state operation of tokamak. Topics included are observation of large bootstrap current fraction, negative shear scenario, demonstration of efficient beam and EC current drive, discovery of current hole, stabilization of the RWM, discovery of ITB (internal transport barrier).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects Of Relative Strength Of Dispersion On The Formation Of Nonlinear Waves In Dusty Plasmas

In this paper, we studied the effect of strength of dispersion on the formation of solitons and shock waves in un-magnetized dusty plasma using the reductive perturbative technique. Different relational forms of strength parameter epsilon were chosen such a way that it altered the stretching of space, x and time, t variables, thereby leading to different nonlinearities. First, we considered the form zeta = sq root(epsilon(x-v{sub 0}t)) and tau = sq root(epsilont), where v{sub 0} is the phase velocity, with 0<epsilon<1 is the parameter that measures the strength of the dispersion. We obtained the Korteweg-de Vries (KdV) equation for un-modulated dust acoustic wave with solitary wave-type solution. The effect of dissipation on the wave propagation was analyzed with coordinate transformations zeta epsilon(x-v{sub 0}t) and tau = epsilon{sup 2}t, with 0<epsilon<1. This led to Burgers' equation with shock wave-type solution. From this study, we concluded that when the dissipation effect is negligible in comparison with dispersion, dust charge fluctuations can only change the amplitude of solitary wave, as observed in the KdV case. However, when the system is not sufficiently dispersive, the dissipation due to dust charge fluctuations can play dominant role and eventually leads to the formation of dust-acoustic shock wave.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

INERTIAL CONFINEMENT FUSION RESEARCH AT LOS ALAMOS NATIONAL LABORATORY

Inertial confinement fusion research at Los Alamos National Laboratory is focused on high-leverage areas of thermonuclear ignition to which LANL can apply its historic strengths and that are complementary to high-energy-density-physics topics. Using the Trident and Omega laser facilities, experiments are pursued in laser-plasma instabilities, symmetry, Be technologies, neutron and fusion-product diagnostics, and defect hydrodynamics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A TUTORIAL ON IGNITION AND GAIN FOR SMALL FUSION TARGETS

Nuclear fusion was discovered experimentally in 1933-34 and other charged particle nuclear reactions were documented shortly thereafter. Work in earnest on the fusion ignition problem began with Edward Teller's group at Los Alamos during the war years. His group quantified all the important basic atomic and nuclear processes and summarized their interactions. A few years later, the success of the early theory developed at Los Alamos led to very successful thermonuclear weapons, but also to decades of unsuccessful attempts to harness fusion as an energy source of the future. The reasons for this history are many, but it seems appropriate to review some of the basics with the objective of identifying what is essential for success and what is not. This tutorial discusses only the conditions required for ignition in small fusion targets and how the target design impacts driver requirements. Generally speaking, the driver must meet the energy, power and power density requirements needed by the fusion target. The most relevant parameters for ignition of the fusion fuel are the minimum temperature and areal density (rhoR), but these parameters set secondary conditions that must be achieved, namely an implosion velocity, target size and pressure, which are interrelated. Despite the apparent simplicity of inertial fusion targets, there is not a single mode of fusion ignition, and the necessary combination of minimum temperature and areal density depends on the mode of ignition. However, by providing a magnetic field of sufficient strength, the conditions needed for fusion ignition can be drastically altered. Magnetized target fusion potentially opens up a vast parameter space between the extremes of magnetic and inertial fusion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

X-ray Spectroscopy of K- and L-shell Z-pinch and Astrophysical Plasmas

In recent years, there have been significant advances in instrumental capabilities for making X-ray spectroscopic measurements of astrophysical plasmas. There have been corresponding improvements in X-ray diagnostics for advanced multi-mega-ampere pulse power machines that produce increasingly large radiative yields from gas-puff and wire array Z pinch plasmas. Analysis used for Z pinches can be used to study ICF and also astrophysical plasmas where laboratory measurements and simulations are the only means to interpret observed data. The astrophysical data for Fe, the most cosmically abundant high Z element, can provide a wealth of information about cosmic plasmas. Fe is also the key element in stainless steel (SS) wire arrays that are investigated as an intense X-ray radiation source at the Z machine at Sandia National Laboratories. The implosion dynamics of an array of wires on the Z and/or refurbished Z accelerator produces an abundance of radiation from the K- and L-shell ionization stages. These dynamic plasmas are inherently non-LTE, with opacity and other factors influencing the X-ray output. As the plasma assembles on axis, a number of time resolved snapshots provide temperature and density profiles and map the emitting region. We will analyze the ionization dynamics and generate K- and L-shell spectra using the conditions generated in the Z and/or refurbished Z accelerator, described by a 1-D non-LTE radiation-hydrodynamics model. Diagnostics based on spectral shape of L-shell emissions are inherently more difficult than those based on K-shell emissions because of more complex multiplet structures and line overlaps. The non-LTE populations are obtained by using detailed atomic models that include all important excitation, ionization, and recombination processes. We will highlight the connection between laboratory Z-pinch plasma simulations and astrophysical plasmas.

79 ASTRONOMY AND ASTROPHYSICS↗

Studying Radiation from Z-pinch Wire Array and X-Pinch Plasmas: K-shell Mg to M-shell Mo

University-scale Z-pinch generators are able to produce plasmas with a broad range of temperatures, densities, and opacity properties depending on the type, size, and mass of wire-array loads and wire materials. Experiments with very different Z-pinch loads were performed on the 1 MA Zebra generator at UNR and analyzed during the last five years including Single and Nested Cylindrical, Conical, and various types of Planar Wire Arrays. It is shown that such wire arrays are good sources of x-rays and that they produce significant radiation yield (up to 25 kJ) on a ns time scale, and generate bright spots of sub-mm size. They can be used for studying radiative properties of moderate density (between 10{sup 18} cm{sup -3} and 5x10{sup 21} cm{sup -3}) and temperature (<=1.5 keV) plasmas. In addition, X-pinches generated higher density (>10{sup 22} cm{sup -3}) and temperature (>2 keV) plasmas on scales as small as a few mum to several mm in size. Wire materials with a broad range of nuclear charge Z were used, ranging from low-Z, such as alloyed Al wires with varying concentrations of Mg, to mid-Z, such as Stainless steel, Cu, Brass, and Mo. Uniform (made from one wire material) as well as combined (made from two wire materials with almost equal wire masses) wire arrays were considered. Uniform, combined, symmetric and asymmetric X-pinches (some of which included a small fraction of tracer Al wires) were also considered. Non-LTE kinetic models to account for K- and L-shell radiation were employed to understand radiative properties of Z-pinch and X-pinch plasmas. Implosion characteristics of such loads are discussed using the wire dynamics and MHD models. Opacity effects of Z-pinch plasmas are studied and benefits of using alloyed and tracer wires are highlighted.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Non-Equilibrium Electron And Ion Temperature Measurements In Omega Direct-Drive Implosions

We have performed experiments at the Omega Laser Facility at the University of Rochester/Laboratory for Laser Energetics to measure time-resolved electron temperature (Te) and ion temperature (Ti) in high-temperature implosions. These experiments use direct laser drive on thin glass shells filled with a mixture of D, {sup 3}He, Kr, and Xe, and use neutron and proton emission to diagnose Ti and x-ray emission to diagnose Te. The Kr dopant serves as an optically-thin tracer for Te measurements via K-shell spectroscopy, while the Xe dopant enhances radiation losses and serves as an energy sink due to ionization. Important results include the observation of an order-of-magnitude increase in areal density with a low concentration of Xe, the observation of double-peaked Ti and x-ray emission time profiles indicative of separate shock and compression phases, and generally good agreement with hydrodynamic simulations of the temperature histories. We describe the experiments, the results, and the supporting hydrodynamics simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of NLTE Emissivity Models on NIF Ignition Hohlraum Power Requirements

NLTE atomic physics model can significantly affect the power requirements and plasma conditions in ignition hohlraums. This is because the emissivity is a significant factor in determining the time dependent coronal temperature of the hot blow-off plasma filling ignition hohlraums, which, in turn, determines the total energy stored in that coronal plasma at any instant. Here we present best estimates of NLTE emissivity using the SCRAM model, including the range of uncertainty, and compare them with the emissivity of the model used to design NIF ignition hohlraums and set the NIF pulse shape, XSN NLTE. We then present pulse shapes derived from hohlraum simulations using an atomic physics model that approximates the SCRAM emissivities. We discuss the differences in coronal energetics and show how this affects the pulse shape and, in particular, the peak power requirement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Addressing the efficiency of the energy transfer to the water flow by underwater electrical wire explosion

Experimental and hydrodynamic simulation results of submicrosecond time scale underwater electrical explosions of planar Cu and Al wire arrays are presented. A pulsed low-inductance generator having a current amplitude of up to 380 kA was used. The maximum current rise rate and maximum power achieved during wire array explosions were dI/dt<=830 A/ns and approx10 GW, respectively. Interaction of the water flow generated during wire array explosion with the target was used to estimate the efficiency of the transfer of the energy initially stored in the generator energy to the water flow. It was shown that efficiency is in the range of 18%-24%. In addition, it was revealed that electrical explosion of the Al wire array allows almost double the energy to be transferred to the water flow due to efficient combustion of the Al wires. The latter allows one to expect a significant increase in the pressure at the front of converging strong shock waves in the case of cylindrical Al wire array underwater explosion.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A closure scheme for modeling rf modifications to the fluid equations

A procedure to include the effects of externally applied rf sources in a comprehensive fluid model is outlined. The fluid equations are derived from moments of a kinetic equation that includes the effects of an rf source. In general, this source produces additional terms in each of the fluid equations. A complete derivation requires the specification of the closure moments; calculations for the stress tensors and heat fluxes that are altered by the presence of the rf are required. By treating the rf induced modification as producing a small distortion away from the background Maxwellian distribution function, a procedure for calculating the closure moments can be formulated. Using a Chapman-Enskog-like procedure, a kinetic equation for the kinetic distortion can be derived that includes the rf-induced contributions to the fluid equations as sources.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A detailed investigation of the properties of a Vlasov-Maxwell equilibrium for the force-free Harris sheet

A detailed discussion is presented of the Vlasov-Maxwell equilibrium for the force-free Harris sheet recently found by Harrison and Neukirch [Phys. Rev. Lett. 102, 135003 (2009)]. The derivation of the distribution function and a discussion of its general properties and their dependence on the distribution function parameters will be given. In particular, the distribution function can be single-peaked or multipeaked in two of the velocity components, with possible implications for stability. The dependence of the shape of the distribution function on the values of its parameters will be investigated and the relation to macroscopic quantities such as the current sheet thickness will be discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Exact equilibria for nonlinear cylindrical ideal magnetohydrodynamic plasma with steady incompressible flow and arbitrary cross sectional shape

Translational symmetric ideal magnetohydrodynamic plasma with steady incompressible flow is considered. The domain then is of cylindrical shape with arbitrary cross section. Several exact solution classes for nonlinear cases are obtained. The obtained solutions are bounded at infinity, in which they are physically acceptable and have applications in astrophysics as well as solar magnetic fields. Some of the solutions are examined to describe low and high beta-plasma equilibria in terms of elementary functions. They can be employed to describe plasma in the solar corona, the photosphere, and the upper corona.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

New construction of the magnetohydrodynamic spectrum of stationary plasma flows. I. Solution path and alternator

A new method of systematically constructing the full structure of the complex magnetohydrodynamic spectra of stationary flows is presented. It is based on the self-adjointness of the generalized force operator G and the Doppler-Coriolis shift operator U, and the associated quadratic forms for the normalized energy W and the normalized Doppler-Coriolis shift V, which may be constructed for all complex values of omega if the original eigenvalue problem is converted into a one-sided boundary value problem. This turns W into a complex expression, while V remains real. Whereas the solution path P{sub s} of stable modes is just the real axis, the solution path P{sub u} of unstable modes in the complex omega plane is found by requiring that the solution-averaged Doppler-Coriolis shifted real part of the frequency vanishes, sigma-V[xi(omega)]=0, or that the energy is real, Im W[xi(omega)]=0. The location of the eigenvalues on these solution paths is determined by two quadratic forms, which may straightforwardly be evaluated in any of the finite element spectral codes in existence. A new oscillation theorem is proved about the monotonicity of complex eigenvalues for one-dimensional systems. Instead of counting internal nodes of the real displacement vector xi (as in static plasmas), it is based on counting the zeros of the alternating ratio, or alternator, Rident toxi/PI of the boundary values of the complex functions xi and the total pressure perturbation PI, which is real on the solution path. This finally provides the generalization of the basic structural properties of the magnetohydrodynamic spectrum of static plasmas, which has been known for a long time, to stationary plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗