SEARCH · Engineering Papers

Results for “FEEDBACK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Optimal state-rate feedback explicit model-following

The development of optimal explicit model-following control laws which include the use of state-rate signals is described. By formulating the control problem to consider both state and state-rate errors, some generalization of previous results is obtained. For special cases in which 'perfect' model-following is possible, the form of the resulting control law is particularly simple and leads to clear understanding of the direct influences of the weighting matrices used in the problem formulation. In addition the use of state-rate feedback permits the solution to be expressed in terms of gains on state an state-rate errors between model and controlled element, thereby obviating any requirement that perturbation signals be used for feedback.

Buethe, S.↗

NASA NTRS1984

Total energy-rate feedback for automatic glide-slope tracking during wind-shear penetration

Low-altitude wind shear is recognized as an infrequent but significant hazard to all aircraft during the take-off and landing phases of flight. A total energy-rate sensor was developed for measuring the specific total energy rate of an airplane with respect to the air mass. Control-system designs, both with and without energy-rate feedback, for the approach to landing of a transport airplane through a severe-wind-shear and gust environment are presented in order to evaluate this application of the sensor. A system model incorporates wind-shear-dynamics equations with the airplane equations of motion to permit analysis of the control systems under various wind-shear conditions. The control systems are designed using optimal-output feedback and are analyzed using frequency-domain control-theory techniques. Control-system performance is evaluated using a complete nonlinear simulation of the airplane combined with a severe-wind-shear and gust data package. This evaluation is concerned with control system stability and regulation capability only.

Belcastro, C. M.↗

NASA NTRS1985

Robustness of velocity feedback controllers for flexible spacecraft

The robustness properties of collocated velocity feedback controllers used for damping enhancement in large, flexible space structures are investigated. It is proved that the closed-loop system using such controllers is asymptotically stable in the large when: (1) unmodeled linear time-invariant dynamics (such as sensors/actuators) are present, provided that the phase angle of such dynamics is between -90 deg and 90 deg; (2) time-varying or invariant nonlinearities lying in the first and the third quadrant (i.e., belonging to the /0, infinity/ sector) are present; or (3) sector-type nonlinearities following first-order stable dynamics are present in the feedback loop.

Joshi, S. M.↗

NASA NTRS1983

Partial and robust linearization by feedback

It is argued that if the nonlinearities in a system are mild, and the controller is sufficiently stabilizing, the inaccuracies of a linear model, which is often taken to be sufficient for a controller design, can be safely neglected. For systems with severe nonlinearity a linearizing technique is described, based on the change of state coordinates and nonlinear feedback; in the total context of a stable feedback design the linearization technique is considered robust. Furthermore, attention is paid to partial linearization using the same transformations. It is found that there always exist maximally linearizing transformations which are not necessarily unique.

Krener, A. J.↗

NASA NTRS1984

Two time scale design of output feedback systems

Singular perturbation techniques are used in this paper to develop a two time scale procedure for designing static gain output feedback controllers. It is shown that, if certain control spillover conditions are satisfied, control designs based on reduced-order models will stabilize the corrgsponding full system. Optimal output feedback control theory is used to derive the necessary conditions for the stabilizing gain matrix. The problem of stabilizing a model for a large space structure is used to illustrate the practicality of the approach.

Calise, A. J.↗

NASA NTRS1984

A comparative study of linear and nonlinear MIMO feedback configurations

In this paper, a comparison is conducted of several feedback configurations which have appeared in the literature (e.g. unity-feedback, model-reference, etc.). The linear time-invariant multi-input multi-output case is considered. For each configuration, the stability conditions are specified, the relation between achievable I/O maps and the achievable disturbance-to-output maps is examined, and the effect of various subsystem perturbations on the system performance is studied. In terms of these considerations, it is demonstrated that one of the configurations considered is better than all the others. The results are then extended to the nonlinear multi-input multi-output case.

Desoer, C. A.↗

NASA NTRS1985

Research on output feedback control

In designing fixed order compensators, an output feedback formulation has been adopted by suitably augmenting the system description to include the compensator states. However, the minimization of the performance index over the range of possible compensator descriptions was impeded due to the nonuniqueness of the compensator transfer function. A controller canonical form of the compensator was chosen to reduce the number of free parameters to its minimal number in the optimization. In the MIMO case, the controller form requires a prespecified set of ascending controllability indices. This constraint on the compensator structure is rather innocuous in relation to the increase in convergence rate of the optimization. Moreover, the controller form is easily relatable to a unique controller transfer function description. This structure of the compensator does not require penalizing the compensator states for a nonzero or coupled solution, a problem that occurs when following a standard output feedback synthesis formulation.

Calise, A. J.↗

NASA NTRS1984

Design and implementation of a compliant robot with force feedback and strategy planning software

Force-feedback robotics techniques are being developed for automated precision assembly and servicing of NASA space flight equipment. Design and implementation of a prototype robot which provides compliance and monitors forces is in progress. Computer software to specify assembly steps and makes force feedback adjustments during assembly are coded and tested for three generically different precision mating problems. A model program demonstrates that a suitably autonomous robot can plan its own strategy.

Premack, T.↗

NASA NTRS1986

Extensions to PIFCGT: Multirate output feedback and optimal disturbance suppression

New control synthesis procedures for digital flight control systems were developed. The theoretical developments are the solution to the problem of optimal disturbance suppression in the presence of windshear. Control synthesis is accomplished using a linear quadratic cost function, the command generator tracker for trajectory following and the proportional-integral-filter control structure for practical implementation. Extensions are made to the optimal output feedback algorithm for computing feedback gains so that the multirate and optimal disturbance control designs are computed and compared for the advanced transport operating system (ATOPS). The performance of the designs is demonstrated by closed-loop poles, frequency domain multiinput sigma and eigenvalue plots and detailed nonlinear 6-DOF aircraft simulations in the terminal area in the presence of windshear.

Broussard, J. R.↗

NASA NTRS1985

Sea surface temperature anomalies, planetary waves, and air-sea feedback in the middle latitudes

Current analytical models for large-scale air-sea interactions in the middle latitudes are reviewed in terms of known sea-surface temperature (SST) anomalies. The scales and strength of different atmospheric forcing mechanisms are discussed, along with the damping and feedback processes controlling the evolution of the SST. Difficulties with effective SST modeling are described in terms of the techniques and results of case studies, numerical simulations of mixed-layer variability and statistical modeling. The relationship between SST and diabatic heating anomalies is considered and a linear model is developed for the response of the stationary atmosphere to the air-sea feedback. The results obtained with linear wave models are compared with the linear model results. Finally, sample data are presented from experiments with general circulation models into which specific SST anomaly data for the middle latitudes were introduced.

Frankignoul, C.↗

NASA NTRS1985

Robust torque control of an elastic robotic arm based on invertibility and feedback stabilization

An approach to the control of elastic robotic systems for space applications using inversion, servocompensation, and feedback stabilization is presented. For simplicity, a robot arm (PUMA-type) with three rotational joints is considered. The third link is assumed to be elastic. Using an inversion algorithm, a nonlinear decoupling control law, u sub d, is derived such that in the closed loop system, independent control of joint angles by the three joint torquers is accomplished. For the stabilization of elastic oscillations, a linear feedback torquer control law, u sub s, is obtained applying linear quadratic optimization to the linearized arm model augmented with a servocompensator about the terminal state. Simulation results show that, in spite of uncertainties in the payload and vehicle angular velocity, good joint angle control and damping of elastic oscillations are obtained with the torquer control law u = u sub d + u sub s.

Singh, S. N.↗

NASA NTRS1986

Evaluation of total energy-rate feedback for glidescope tracking in wind shear

Low-altitude wind shear is recognized as an infrequent but significant hazard to all aircraft during take-off and landing. A total energy-rate sensor, which is potentially applicable to this problem, has been developed for measuring specific total energy-rate of an airplane with respect to the air mass. This paper presents control system designs, with and without energy-rate feedback, for the approach to landing of a transport airplane through severe wind shear and gusts to evaluate application of this sensor. A system model is developed which incorporates wind shear dynamics equations with the airplance equations of motion, thus allowing the control systems to be analyzed under various wind shears. The control systems are designed using optimal output feedback and are analyzed using frequency domain control theory techniques. Control system performance is evaluated using a complete nonlinear simulation of the airplane and a severe wind shear and gust data package. The analysis and simulation results indicate very similar stability and performance characteristics for the two designs. An implementation technique for distributing the velocity gains between airspeed and ground speed in the simulation is also presented, and this technique is shown to improve the performance characteristics of both designs.

Belcastro, C. M.↗

NASA NTRS1987

Approximate Feedback Control for a System With Memory

Report presents algorithm for calculating feedback gain for control of hereditary dynamical systems with control delay. Problem is to approximate optimal feedback gain that minimizes cost function of state and control. Theory applicable to design of controllers for mechanical systems subject to thermal deformation, electrical systems with delay, electrical systems with plasma components, and other systems that exhibit memory.

Milman, Mark H.↗

NASA NTRS1986

A numerical algorithm for optimal feedback gains in high dimensional LQR problems

A hybrid method for computing the feedback gains in linear quadratic regulator problems is proposed. The method, which combines the use of a Chandrasekhar type system with an iteration of the Newton-Kleinman form with variable acceleration parameter Smith schemes, is formulated so as to efficiently compute directly the feedback gains rather than solutions of an associated Riccati equation. The hybrid method is particularly appropriate when used with large dimensional systems such as those arising in approximating infinite dimensional (distributed parameter) control systems (e.g., those governed by delay-differential and partial differential equations). Computational advantage of the proposed algorithm over the standard eigenvector (Potter, Laub-Schur) based techniques are discussed and numerical evidence of the efficacy of our ideas presented.

Banks, H. T.↗

NASA NTRS1987

RKH space approximations for the feedback operator in a linear hereditary control system

Computational implementation of feedback control laws for linear hereditary systems requires the approximation of infinite dimensional feedback operators with finite dimensional operators. The dense subspaces of K-polygonal functions in reproducing kernel Hilbert spaces, RKH spaces, suggest finite dimensional approximations of the matrix representations of the control operators. A convergence theorem is developed for the approximations and the numerical implementation of the approximations is discussed.

Reneke, J. A.↗

NASA NTRS1987

Distributed feedback modes in a partially filled ring cavity

The threshold longitudinal modes of a structure composed of a ring cavity partially filled with a distributed feedback (DFB) medium have been studied. An eigenvalue equation and dispersion relation for the propagation constant, threshold gain, and mode location are derived and numerically solved for a number of cases. It is shown that the incommensurate nature of the unfilled ring cavity eigenfrequencies and DFB eigenfrequencies can lead to an enhancement of the frequency selectivity of the distributed feedback laser. The analysis is extended to consider finite linewidth and dispersion.

Rabinovich, William S.↗

NASA NTRS1987

Positive position feedback control for large space structures

A new technique for vibration suppression in large space structures is investigated in laboratory experiments on a thin cantilever beam. This technique, called Positive Position Feedback, makes use of generalized displacement measurements to accomplish vibration suppression. Several features of Positive Position Feedback make it attractive for the large space structure control environment: The realization of the controller is simple and straightforward. Global stability conditions can be derived which are independent of the dynamical characteristics of the structure being controlled, i.e., all spillover is stabilizing. The method cannot be destabilized by finite actuator dynamics, and the technique is amenable to a strain-based sensing approach. The experiments control the first six bending modes of a cantilever beam, and make use of piezoelectric materials for actuators and sensors, simulating a piezoelectric active-member. The modal damping ratios are increased by factors ranging from 2 to 130.

Fanson, J. L.↗

NASA NTRS1987

An analytical and experimental investigation of output feedback vs. linear quadratic regulator

This paper presents analytical and experimental comparison of three control laws for a laboratory structure designed to simulate large space structures. The first control law is the standard time invariant linear quadratic regulator with state estimation, which requires model reduction for practical implementation. This model reduction is associated with the so-called spillover instability. Two new simple direct output feedback control laws guaranteeing stability are proposed. One minimizes the maximum control force, and the other minimizes the same quadratic performance index as the linear quadratic regulator. The three control laws are found to give comparable performance for the modes retained in the reduced model. However, the standard linear quadratic regulator with state estimation provides almost no margin of stability for the unmodeled modes, while the simpler direct feedback laws provide significant stability margins to all modes. The analytical results were verified experimentally using a digital implementation of the control laws. Good agreement between the analytical predictions and experimental measurements was observed.

Martinovic, Zoran N.↗