Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Examination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Key Drivers for Offshore Wind Deployment in the Western United States

The western coast of the United States has abundant natural resources, including wind, sun, and water. Despite strong ocean winds, offshore wind energy (OSW) in the Western United States is in the early stages of technology development due largely to the deep water off the coast, which requires floating platforms rather than fixed‐bottom turbines. Floating OSW increases the technical difficulty of installation and thus the cost relative to both fixed‐bottom OSW and land‐based turbines. OSW is a potential generation option to help meet increasing demand on the west coast of the United States because it likely has fewer land‐use conflicts than other technologies and complements sources in the existing electricity supply by providing energy during times of high system stress. This paper examines the possible drivers and barriers to OSW deployment on the West Coast using the National Laboratory of the Rockies' state‐of‐the‐art capacity expansion model and the Regional Energy Deployment System (ReEDS) model. We use ReEDS to explore a multitude of future scenarios looking at key drivers for OSW deployment, including variations on the cost of OSW, electricity demand growth, and the availability of competing technologies to examine the factors that may play a role in OSW growth. Assuming coastal state policies such as renewable portfolio and clean energy standards remain in place, we find that OSW can play a role in meeting electricity demand and provide energy during stressful grid conditions and find that deployment from the least‐cost investment model ranges from 7.6 to 38 GW by 2045.

17 WIND ENERGY↗
DOE OSTI2024

The Role of Fuels in Transforming Energy End-Use in Buildings and Industrial Processes

This book examines what role fuels have in the transformation of end-use in buildings and industrial processes. Energy efficient technologies are necessary to lower the carbon footprint for a transition towards clean energy in a sustainable manner. Efficient utilization of primary energy resources including renewables to support the current and future energy needs while targeting grid resiliency, energy and environmental security, at an affordable cost is of significant value. Analysis of configurations consisting of heat pumps, fuel driven thermal providers and power systems is presented. Sensitivity of electrical grid's carbon intensity towards carbon footprint in comparison with fuel driven technologies is necessary to recognize the true value proposition of currently available energy solutions for different end consumers. Similarly, the role of low carbon, zero carbon, and carbon negative fuels such as power to gas, power to liquid, hydrogen, biogas, etc. in conjunction with polygeneration technologies are discussed. Transformation of the primary energy resources from conventional fossil fuels to renewable fuels or electricity will have a significant impact on the overall carbon footprint of various end use sectors, including buildings. Hence, this book also examines two different scenarios focused on sensitivity of the pace of decarbonization of electrical grid and fuel supply on operational energy related carbon emissions.

Cheekatamarla, Praveen↗
DOE OSTI2024

Use of a Lignin-Based Admixture for Tailoring the Rheological Properties of Mortars for 3D Printing: Preprint

Efforts toward decarbonizing construction materials and industrial processes related to cement and concrete can be aided via multifaceted approaches that target alternative admixtures as well as precision control of fabrication. Chemical admixtures for water reduction have played a crucial role in the development of advanced concrete mixtures. Newer biomass processing techniques developed for aviation fuel production from corn stover biomass produce a more reactive lignin byproduct that is suitable for chemical modifications to mimic the properties of polycarboxylate ether admixtures with a smaller carbon footprint. The present study examines the use of lignin-based water-reducing admixture in cement pastes and mortar mixtures for 3D printing. The experimental program explores the use of different dosages of lignin-based admixture to produce 3D-printed samples with appropriate extrudability and buildability. The rheological characterization was performed to determine the flow curve of various mixtures. Finally, the heat of hydration of cement pastes was monitored via isothermal calorimetry to assess the impact of lignin-based admixtures on the hydration process of cement. The results of this study indicate that the use of biomass by-products, such as lignin-based admixtures have great potential to effectively control the fresh-state properties of cement-based materials.

bio-based admixtures↗
DOE OSTI2025

Machine Learning in the Context of Laser-Induced Breakdown Spectroscopy

The integration of machine learning (ML) with Laser-Induced Breakdown Spectroscopy (LIBS) has revolutionized the analytical capabilities of LIBS. The combi-nation of both methods enables more accurate and efficient data analysis. While LIBS itself is a powerful technique for elemental analysis, the vast amount of spectral data it generates can be hard to interpret. Machine learning addresses these challenges by leveraging algorithms that can learn from data, identify patterns, and make predictions without explicit programming for the interpretation of each specific task. In LIBS application, ML techniques are used to enhance various analytical processes. For example, ML algorithms can classify materials based on their spectral fingerprints, predict the concentration of elements in a sample, and identify underlying patterns within complex datasets. Here, this application improves the precision of LIBS analyses while significantly reducing the time required for data processing and interpretation. In this chapter, the fundamental concepts of ML will be discussed first. Following this, the process of data splitting and the importance of feature selection will be examined. Several machine learning methods will then be closely examined, exploring how each can benefit LIBS analysis and highlighting their respective advantages and shortcomings. This structured approach will provide a comprehensive understanding of the integration of ML in the context of LIBS analysis.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Supernova Muons: New Constraints on Z' Bosons, Axions and ALPs

New light particles produced in supernovae can lead to additional energy loss and a consequent deficit in neutrino production in conflict with the neutrinos observed from Supernova 1987A (SN1987A). Contrary to the majority of previous SN1987A studies, we examine the impact of Z' bosons, axions, and axion-like particles (ALPs) interacting with the muons produced in SN1987A. For the first time, we find constraints on generic Z' bosons coupled to muons, and apply our results to particle models including gauged $L_μ –L_τ$ number, U(1)$_{L_μ–L_τ}$, and gauged B – L number, U(1)$_{B–L}$. We constrain Z' bosons with masses up to about 250 – 500 MeV, and down to about 10 –9 in Z'-muon coupling. We also extend previous work on axion-muon couplings by examining the importance of loop-level interactions, as well as performing calculations over a wider range of axion masses. We constrain muon-coupled axions from arbitrarily low masses up to about 200 – 500 MeV, with bounds extending down to axion-muon couplings of approximately 10 –8 GeV –1 . We conclude that supernovae broadly provide a sensitive probe of new lightly-coupled particles interacting with muons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Quantum Critical Higgs: from AdS 5 to colliders

We examine distinctive signatures of Quantum Critical Higgs models at the LHC and future higher energy colliders. In these models the Higgs boson is part of a conformal sector that is softly broken at a threshold scale, and generically the scaling dimension of the Higgs is larger than in the Standard Model. In particular we examine the gg → H → ZZ, gg → H → γγ, and gg → Z → H Z channels to see how the cross sections deviate from the Standard Model in the high invariant mass region. In order to perform the calculations we use 5D duals of Quantum Critical Higgs models using the AdS/CFT correspondence, with a soft wall to break the conformal symmetry.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

The cosmological moduli problem and naturalness

Nowadays, the cosmological moduli problem (CMP) comes in three parts: 1. potential violation of Big-Bang nucleosynthesis (BBN) constraints from late decaying moduli fields, 2. the moduli-induced gravitino problem wherein gravitinos are overproduced and their decays violate BBN or dark matter overproduction bounds and 3. the moduli-induced lightest SUSY particle (LSP) overproduction problem. Also, the CMP may be regarded as either a problem or else a solution to scenarios with dark matter over- or under-production. We examine the cosmological moduli problem and its connection to electroweak naturalness. We calculate the various two-body decay widths of a light modulus field into MSSM particles and gravitinos within general supersymmetric models. We include both phase space and mixing effects. We examine cases without and with helicity suppression of modulus decays to gravitinos (cases 1 & 2) and/or gauginos (cases A & B). For case B1, we evaluate regions of gravitino mass m 3/2 vs. modulus mass mΦ parameter space constrained by BBN, by overproduction of gravitinos and by overproduction of neutralino dark matter, along with connections to naturalness. For this case, essentially all of parameter space is excluded unless mΦ ≳ 2.5 × 10 3 TeV with mΦ< 2m 3/2 For a potentially most propitious case B2 with Φ decay to Higgs and matter turned off, then modulus branching fractions to SUSY and to gravitinos become highly suppressed at large m Φ . But since the modulus number density increases faster than the branching fractions decrease, there is still gross overproduction of neutralino dark matter. We also show that in this scenario the thermally produced gravitino problem is fixed by huge entropy dilution, but non-thermal gravitino production from moduli decay remains a huge problem unless it is kinematically suppressed with m Φ < 2m 3/2 . In a pedagogical appendix, we present detailed calculations of modulus field two-body decay widths.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

QCD+QED PDF implications for the Higgs sector

In this work, we examine the implications of electroweak corrections beyond leading order for processes of special interest in the Higgs sector. We especially explore the role of these corrections given the introduction of an explicit parton distribution function (PDF) for the photon in the proton, an object which emerges necessarily in global PDF fits which include QED effects (i.e., ‘QCD+QED PDFs’). We concentrate on several representative cases, including total Higgs-production cross sections through gluon fusion, gg → H, vector-boson fusion (VBFH), and associated production, pp → V H; we also examine differential distributions, taking a representative Higgs-strahlung process, pp → W + H. We find that the recently developed LUX formalism for the photon PDF significantly stabilizes the PDF dependence of both QED-PDF and electroweak corrections in the Higgs sector, while leaving overall ~ 3–4% cross-section-level variations, depending on the chosen QCD+QED PDF. We illustrate this QCD+QED PDF dependence by exploring predictions based upon recent analyses of the CTEQ-TEA, MSHT, and NNPDF analysis groups, fitted either at NNLO or approximate N3LO in QCD.

Higgs production↗
DOE OSTI2022

Distinctive signals of frustrated dark matter

We study a renormalizable model of Dirac fermion dark matter (DM) that communicates with the Standard Model (SM) through a pair of mediators — one scalar, one fermion — in the representation (6, 1, $\frac{4}{3}$) of the SM gauge group SU(3) c x SU(2) L x U(1) Y . While such assignments preclude direct coupling of the dark matter to the Standard Model at tree level, we examine the many effective operators generated at one-loop order when the mediators are heavy, and find that they are often phenomenologically relevant. We reinterpret dijet and pair-produced resonance and jets + E$^{miss}_{T}$ searches at the Large Hadron Collider (LHC) in order to constrain the mediator sector, and we examine an array of DM constraints ranging from the observed relic density Ω χ h$^{2}_{Planck}$ to indirect and direct searches for dark matter. Tree-level annihilation, available for DM masses starting at the TeV scale, is required in order to produce Ω χ h$^{2}_{Planck}$ through freeze-out, but loops — led by the dimension-five DM magnetic dipole moment — are nonetheless able to produce signals large enough to be constrained, particularly by the XENON1T experiment. In some benchmarks, we find a fair amount of parameter space left open by experiment and compatible with freeze-out. In other scenarios, however, the open space is quite small, suggesting a need for further model-building and/or non-standard cosmologies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Effects of lead and lean in multi-axis directed energy deposition

Here, the present study examines the effect of varying laser incidence angles on textural, microstructural, and geometric characteristics of directed energy deposition (DED) processed materials, providing a more comprehensive outlook on participating laser-matter interaction phenomena and ultimately devising strategies to ameliorate print performance. In this study, single-layer, single-/multi-track specimens were processed to examine the effect of non-orthogonal angular configurations on bead morphology, microstructure, phase composition, and textural representation of DED-processed 316L stainless steel materials. It was observed that bead size decreased at increasing lead and lean angles. Asymmetry in the distribution of the bead morphology as a function of lead angle indicates better catchment for acute lead angle configurations over obtuse configurations. No significant differences in phase composition, texture, and microstructure were observed in moderate off-axis configurations. When the penetration depth for the deposits was below 20 μm, columnar structures dominated the microstructure of the deposited material. At deeper penetration depths, columnar and equiaxed structures were observed at the bead-substrate interface and center of the bead, respectively. Compared to powder-blown DED, wire-DED dilution profiles were found to be asymmetric in both orthogonal and non-orthogonal wire DED samples.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A comparison of explosively driven shock wave radius versus time scaling approaches

Abstract Explosively driven shock wave radius versus time profiles are frequently used to document energy release and relative explosive performance. Recently, two universal shock wave radius versus time profiles have been presented in the literature, which demonstrate the ability to represent explosively driven shock wave profiles for all explosive sources in any fluid environment. These two universal shock wave profiles are examined here relative to each other and relative to a commonly used nonlinear shock wave profile, which is fit to experimental data for individual explosive materials. The nonlinear profile, originally developed by Dewey, is examined here, and a universal non-dimensional form of the equation is proposed. The universal shock wave profiles are all found to be relatively similar, but with slight variations in a transition region of non-dimensional radii $$0.15\lesssim R^*\lesssim 2$$ 0.15 ≲ R ∗ ≲ 2 . The variations in this region result in different estimations of energy release or blast strength between the curve fits.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

High-resolution ion mobility based on traveling wave structures for lossless ion manipulation resolves hidden lipid features

Abstract High-resolution ion mobility (resolving power > 200) coupled with mass spectrometry (MS) is a powerful analytical tool for resolving isobars and isomers in complex samples. High-resolution ion mobility is capable of discerning additional structurally distinct features, which are not observed with conventional resolving power ion mobility (IM, resolving power ~ 50) techniques such as traveling wave IM and drift tube ion mobility (DTIM). DTIM in particular is considered to be the “gold standard” IM technique since collision cross section (CCS) values are directly obtained through a first-principles relationship, whereas traveling wave IM techniques require an additional calibration strategy to determine accurate CCS values. In this study, we aim to evaluate the separation capabilities of a traveling wave ion mobility structures for lossless ion manipulation platform integrated with mass spectrometry analysis (SLIM IM-MS) for both lipid isomer standards and complex lipid samples. A cross-platform investigation of seven subclass-specific lipid extracts examined by both DTIM-MS and SLIM IM-MS showed additional features were observed for all lipid extracts when examined under high resolving power IM conditions, with the number of CCS-aligned features that resolve into additional peaks from DTIM-MS to SLIM IM-MS analysis varying between 5 and 50%, depending on the specific lipid sub-class investigated. Lipid CCS values are obtained from SLIM IM ( TW(SLIM) CCS) through a two-step calibration procedure to align these measurements to within 2% average bias to reference values obtained via DTIM ( DT CCS). A total of 225 lipid features from seven lipid extracts are subsequently identified in the high resolving power IM analysis by a combination of accurate mass-to-charge, CCS, retention time, and linear mobility-mass correlations to curate a high-resolution IM lipid structural atlas. These results emphasize the high isomeric complexity present in lipidomic samples and underscore the need for multiple analytical stages of separation operated at high resolution. Graphical abstract

Reardon, Allison R. (ORCID:0000000165830134)↗
DOE OSTI2025

Comprehensive Analysis of the Relative Dispersion of Droplet-Size Distributions and Their Relationships to Key Physical Fog Processes Under Different Aerosol Conditions and Evolutionary Stages

The relative dispersion of cloud and fog droplets has significant impacts on aerosol indirect effects, radiative transfer, and microphysical processes. However, previous studies have been mostly concerned with clouds, with limited studies on fog, particularly those that examine the combined influences of all key physical processes and their roles during fog evolution. As such, this study aims to conduct a comprehensive investigation by examining the relationships between relative dispersion and other microphysical variables, as well as the underlying microphysical and dynamic processes, based on field fog campaigns in polluted and clean conditions. In polluted fog, droplet concentrations are higher, leading to smaller droplets and increased dispersion. The correlation between dispersion and droplet volume-mean radius is positive in the polluted fog, but shifts to negative in clean fog. Here, we attribute the difference to various microphysical processes like aerosol activation, condensation, collision-coalescence, and entrainment-mixing. In polluted fog, high aerosol concentrations, low supersaturations, and strong turbulence (entrainment-mixing) provide suitable conditions for the simultaneous occurrence of droplet condensation and aerosol activation, resulting in a positive correlation between dispersion and volume-mean radius, especially during the fog formation stage. In contrast, during the mature stage in clean fog, condensation is dominant with weak aerosol activation leading to a negative correlation between relative dispersion and volume-mean radius. The collision-coalescence process is more active in the mature stage, increasing radii and leading to the negative correlation between dispersion and volume-mean radius. This result sheds new light on understanding the relative dispersion and mechanisms in fog under different aerosol backgrounds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Pacific decadal oscillation remotely forced by the equatorial Pacific and the Atlantic Oceans

Abstract The Pacific Decadal Oscillation (PDO), the leading mode of Pacific decadal sea surface temperature variability, arises mainly from combinations of regional air-sea interaction within the North Pacific Ocean and remote forcing, such as from the tropical Pacific and the Atlantic. Because of such a combination of mechanisms, a question remains as to how much PDO variability originates from these regions. To better understand PDO variability, the equatorial Pacific and the Atlantic impacts on the PDO are examined using several 3-dimensional partial ocean data assimilation experiments conducted with two global climate models: the CESM1.0 and MIROC3.2m. In these partial assimilation experiments, the climate models are constrained by observed temperature and salinity anomalies, one solely in the Atlantic basin and the other solely in the equatorial Pacific basin, but are allowed to evolve freely in other regions. These experiments demonstrate that, in addition to the tropical Pacific’s role in driving PDO variability, the Atlantic can affect PDO variability by modulating the tropical Pacific climate through two proposed processes. One is the equatorial pathway, in which tropical Atlantic sea surface temperature (SST) variability causes an El Niño-like SST response in the equatorial Pacific through the reorganization of the global Walker circulation. The other is the north tropical pathway, where low-frequency SST variability associated with the Atlantic Multidecadal Oscillation induces a Matsuno-Gill type atmospheric response in the tropical Atlantic-Pacific sectors north of the equator. These results provide a quantitative assessment suggesting that 12–29% of PDO variance originates from the Atlantic Ocean and 40–44% from the tropical Pacific. The remaining 27–48% of the variance is inferred to arise from other processes such as regional ocean-atmosphere interactions in the North Pacific and possibly teleconnections from the Indian Ocean.

Meteorology & Atmospheric Sciences↗
DOE OSTI2022

Assessing free tropospheric quasi-equilibrium for different GCM resolutions using a cloud-resolving model simulation of tropical convection

Abstract This study examines the free-tropospheric quasi-equilibrium at different global climate model (GCM) resolutions using the simulation of tropical convection by a cloud-resolving model during the Tropical Western Pacific International Cloud Experiment. The simulated dynamic and thermodynamic fields within the model domain are averaged over subdomains of different sizes equivalent to different GCM resolutions. These coarse-grained fields are then used to compute CAPE and its change with time, and their relationships with simulated convection. Results show that CAPE change with time is controlled predominantly by variations of thermodynamic properties in the planetary boundary layer for all subdomain sizes ranging from 64 to 4 km. Lag correlation analysis shows that CAPE generation by the free-tropospheric dynamical advection (dCAPE ls ) leads convective precipitation but is in phase with convective mass flux at 600 mb and 500 mb vertical velocity for all subdomain sizes. However, the correlation coefficients and regression slopes decrease as the subdomain size decreases for subdomain sizes smaller than 16 km. This is probably due to increased randomness of convection and more scale-dependence of the relationships when the subdomain size reaches the grey zone. By examining the sensitivity of the relationships of convection with dCAPE ls to temporal scales in different subdomain size, it shows that the quasi-equilibrium between dCAPE ls and convection holds well for timescales of 30 min or longer at all subdomain sizes. These results suggest that the free tropospheric quasi-equilibrium assumption may still be useable even for GCM resolutions in the grey zone.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Multi-regime mixing modeling for local extinction and re-ignition in turbulent non-premixed flame by using LES/FDF method

Local extinction and re-ignition occur in turbulent non-premixed combustion when the Damköhler number is not large enough and the combustion is not fully mixing controlled. The occurrence of local extinction introduces locally extinguished flame holes followed by a premixed flame propagation toward the hole center to potentially reignite the flame. The co-existence of the non-premixed and premixed combustion regimes complicates the modeling since traditional combustion models are mostly for a single regime. In this work, we examine the effect of multi-regime mixing modeling in the transported filtered density function (FDF) method on the predictions of local extinction and reignition. Predictions of local extinction and reignition remain a challenge for the FDF method despite the progress made in the past. To account for the multi-regime combustion, two different mixing timescale models for non-premixed and premixed combustion are combined. A flame index based on the gradients of fuel and oxidizer is used to define a weighting factor to blend the two mixing timescale models. A turbulent jet non-premixed flame with substantial local extinction, the Sydney piloted jet flame L, is adopted as a test case to examine the performance of the multi-regime model in large-eddy simulation/FDF modeling. It is found that the traditional non-premixed mixing timescale model when combined with the modified Curl mixing leads to global extinction for the Sydney flame L without the presence of the premixed combustion regime. After accounting for the multi-regime combustion with proper detection of the different combustion regimes, the predictions for the flame statistics and the amount of local extinction are significantly improved. Furthermore, it suggests the need of including multi-regime combustion for the predictions of local extinction and re-ignition in turbulent non-premixed combustion configurations.

42 ENGINEERING↗
DOE OSTI2023

Scavenging dynamics on Guam and implications for invasive species management

Deployment of mouse carcasses laced with acetaminophen has become a common management tool to control invasive brown tree snakes (Boiga irregularis; BTS) on Guam. Additionally, anticoagulant rodenticides may be used to control invasive rats (Rattus spp.) if their populations increase due to predator release in the wake of BTS eradication. However, there has been little research examining how scavengers on Guam could be incidentally exposed to toxicants by scavenging carcasses of animals that die from these population control strategies. Furthermore, there is a limited understanding of how the proliferation of invasive species on Guam has influenced the composition of the scavenger community. We investigated these topics by examining scavenger consumption of mouse, rat, and BTS carcasses on Guam in both a coastal and upland site during the wet (May–Aug 2016) and dry season (Jan–Apr 2017). We documented carcass consumption by 9 species, which scavenged 48% of carcasses. Interactions between season, habitat, and carcass type influenced probability of scavenging, and appeared to be driven by consumption by the two main scavenger species, BTS and cane toads (Rhinella marina), both of which are invasive on Guam. Baiting programs should consider the potential for toxin exposure to land crabs (Coenobita spp., Birgus latro), native species that scavenged at every combination of carcass type, habitat, and season. Altogether, 60% of scavenging events were attributed to species considered pests that are recent introductions to Guam. Invasive species on Guam are the primary scavengers of small vertebrate carrion, suggesting a substantial role in trophic dynamics that extends beyond predation.

59 BASIC BIOLOGICAL SCIENCES↗