Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Environmental Science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Surface Charge Distribution Mapping Using an Electrostatic Probe

Undesired accumulation of charge on dielectric materials causing electrostatic discharges can be an issue in pulsed power systems and electrical systems in general. As such, an understanding of surface charge distribution, charge accumulation, and decay is required. An in-house no-contact electrostatic probe designed with a 2 mm resolution was fabricated to measure and map surface charge distribution. Designed as a contactless instrument, the probe consisting of a metal rod and low leakage amplifier circuit probes the electric potential near the surface. A scan of the surface then provides the raw data, a potential distribution. The actual probe response - i.e., the surface charge to voltage transfer function, is accounted for in post-processing. This is accomplished via an Inverse Wien Filter - a technique often applied in image processing - to deconvolve the probe response from the measured data. A commercially available electrostatic probe, the Trek 341B meter with a 3455ET probe, capable of measuring +/- 20 kV was compared to the in- house probe that is designed to cover a wider range from +/- 35 kV. A resolution better than the simple probe resolution is achieved through the distribution’s scanning voltage method and deconvolution. Applying repeated scans, surface charge decay was tracked on various polymer materials to determine the material and environment dependence; materials included were PA6, PTFE, and others. As an example of material dependence, samples charged to 20 kV at 65% humidity experience full charge decay in approximately 45 seconds for PA5 (152 mm dia.), while it took about 100 times longer for PTFE (51 mm dia.) to observe the same decay/redistribution of charge.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Leveraging Environmental Monitoring Results from Department of Energy Sites for Research on the Food-Energy-Water Nexus

The Annual Site Environmental Report (ASER) from a U.S. Department of Energy (DOE) Site summarizes environmental data; environmental management performance; compliance with applicable DOE, federal, state, and local regulations; and restoration and surveillance monitoring programs. The Savannah River Site (SRS) produces ASERs that include results of monitoring mercury levels in fish samples obtained in the vicinity of SRS. Mercury is a toxic trace metal and the methylated organic form is a neurotoxin that bioaccumulates in the food web, endangering humans and other organisms. In United States, power plants are the largest source of mercury emissions. Research Objective: To determine the patterns of mercury levels in fish samples reported in the SRS environmental monitoring reports. We developed box plot visualizations to make sense of the data as well as identify fish species, dates and location with outlier mercury content. The integration and visual representation of multi-year datasets can support decision making processes on environmental compliance and environmental sustainability conducted at U.S. DOE Sites. We are constructing datasets from textual, image and multivariable data sources in the multi-year ASERs of the U.S. DOE Savannah River Site (SRS https://www.srs.gov/general/pubs/ERsum/index.html). The Fish Surveillance for mercury presents a case study for the intersection of food, energy and water systems. The dataset of 864 records (2008 and 2009) of mercury levels includes water location of fish, fish species, collection date and mercury content of fish sample. The patterns of mercury levels in the fish species as well as locations provide knowledge for further investigations. A research area for future studies is the composition of microbial communities in fish guts of varying levels of mercury.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

The CO2 mineralization potential of New Mexico basalts and associated critical element behavior and mobility.

This presentation reports on laboratory experiments assessing the carbon dioxide (CO₂) mineralization potential of New Mexico basalts, including trachybasalt and basalt lithologies. Using simulated groundwater and controlled conditions, the study evaluates the kinetics of CO₂ sequestration, mineral saturation indices, and secondary mineral formation. It also investigates the mobility of critical and trace elements such as Ni, Zn, Cu, and Li during basalt dissolution. Results indicate that New Mexico basalts can effectively sequester CO₂ through carbonate formation, with grain size and mineral composition influencing reaction rates and elemental behavior. These findings support the viability of geologic carbon storage in mafic volcanic terrains and inform strategies for critical element recovery.

36 MATERIALS SCIENCE↗
DOE OSTI2026

RDPP: Accelerating Diversity in DOE Climate Science and Resilience Research (Final Report)

The scope of the project was set out to accelerate the inclusion of diversity into the Department of Energy (DOE) Earth and Environmental Systems Sciences Division (EESSD) relevant climate science and resilience research to inclusively advance solutions. The Project Objectives were to usher in equitable use-inspired climate-related research with underrepresented Minorities of which this project helped fund 7 HU graduate students work with the DOE (three of which will graduate in Spring 2025). The two key aims underpinning that core goal were AIM1: developing partnerships (18 organized engaged, see partners list) and AIM2: Developing capabilities (3 visits to DOE facilities, 5 DOE partners visits to HU, increased visiting faculty participation in BNL-DOE lab, secured 5 grants together totaling 1.2 million in funds for HU). The project objectives were highly successful as they were designed to ambitiously pull together DOE lab researchers with the long-standing and successful transdisciplinary climate science research programs of the PI and local DC groups. The major outcomes of this RDPP program will be in the new fundamentally inclusive partnerships with DOE and HU tasked to understand the urban-rural impacts due to climate change in the US, Eastern South Atlantic (ESA) Region, related to energy issues driven by heat stress and the water cycle. Overall, this project contributes to the DOE and science community vision for catalyze connections for project-ready underrepresented minorities (URMs) at a prominent HBCU to DOE projects supported by the Biological and Environmental research (BER) Program; particularly, the Earth and Environmental Systems Sciences Division (EESSD).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Evaluation of CMIP6 Streamflow in the Arctic

Earth system models (ESMs) serve as the primary basis for projecting future streamflow changes, but they are biased in terms of the their ability to reproduce historical observations of streamflow. Rigorous downscaling and bias-correction procedures, which are time-consuming and introduce uncertainties, are commonly used to address these biases in streamflow or runoff. However, the applicable limits of streamflow projections remain largely untested through direct comparisons with observations. In this work, we compare historical streamflow time series observations with a suite of Coupled Model Intercomparison Project phase 6 (CMIP6) ESMs to assess the space and time scales at which each ESM represents historic streamflow observations. We focus our analysis on streamflow across the Arctic given the higher degree of warming experienced over this region, underscoring its importance for understanding the future changes. A series of metrics—volume, seasonality, extreme capturing streamflow variability, drought, and flooding is tested to assess ESM simulation skill for total events and overall distributions. Our results indicate that although improvements are necessary in ESM runoff and streamflow projections, the use of temporal averaging and targeting the best-fit model for comparison to observations when a suite of ESMs is considered can provide robust streamflow projections. Moreover, this work provides a basis for contextualizing the limits of ESM applicability for studies aiming to assess streamflow in the future.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Surface Hydroxyls of Imogolite Nanotubes Drive Distinct Structures and Mobility Differentiation of Nanoconfined Water

Abstract Nanoconfined fluids, particularly water, govern subsurface geochemistry, yet the molecular-level mechanisms by which mineral surfaces dictate confined water structure and mobility remain poorly resolved. Here, we combine solution- and solid-state proton (1H) NMR spectroscopy, NMR relaxometry, modulated-gradient spin–echo (MGSE) NMR diffusometry, infrared spectroscopy, and molecular dynamics simulations to demonstrate that surface hydroxyls drive the structural and dynamic differentiation of water in imogolite nanotubes. In saturated suspensions, we observe the coexistence of distinct water 1H environments, each exhibiting significantly reduced mobility, which we attribute to strong interactions with the imogolite surfaces. As more mobile water is removed, long-range water diffusivity in the fibrous solid samples slows to 1.6 × 10–10 m2·s–1 while local fluctuations increase to 3.4 × 10–8 m2·s–1, indicating a significant increase in molecular restriction through surface interactions. Together, our experiments reveal three coexisting populations with varied structures and mobilities, all distinct from liquid bulk water. We resolve a persistent solid-like interfacial layer strongly bound to surface hydroxyls, characterized by an unusually short T2 (<1 ms), and a very close effective 1H–1H distance of ∼1.55 Å between water and the inner-surface silanol group. An inner-core population occupying the inner cavity exhibits an intermediate dynamic regime with restricted axial diffusion, while outer-surface water associated with aluminum hydroxyls retains relatively higher mobility. These results experimentally substantiate a hierarchy of water populations in imogolite and show how surface chemistry dictates the structures and dynamics of confined water.

Fleming, Xander B. [Earth and Environmental Scienc↗
DOE OSTI2021

Incidence of chronic respiratory conditions among oil spill responders: Five years of follow-up in the Deepwater Horizon Oil Spill Coast Guard Cohort study

Background: Over ten years after the Deepwater Horizon (DWH) oil spill, our understanding of long term respiratory health risks associated with oil spill response exposures is limited. Here we conducted a prospective analysis in a cohort of U.S. Coast Guard personnel with universal military healthcare. Methods: For all active duty cohort members (N = 45,193) in the DWH Oil Spill Coast Guard Cohort Study we obtained medical encounter data from October 01, 2007 to September 30, 2015 (i.e., ~2.5 years pre-spill; ~5.5 years post-spill). We used Cox Proportional Hazards regressions to calculate adjusted hazard ratios (aHR), comparing risks for incident respiratory conditions/symptoms (2010–2015) for: responders vs. non-responders; responders reporting crude oil exposure, any inhalation of crude oil vapors, and being in the vicinity of burning crude oil versus responders without those exposures. We also evaluated self-reported crude oil and oil dispersant exposures, combined. Within-responder comparisons were adjusted for age, sex, and smoking. Results: While elevated aHRs for responder/non-responder comparisons were generally weak, within-responder comparisons showed stronger risks with exposure to crude oil. Notably, for responders reporting exposure to crude oil via inhalation, there were elevated risks for all sinusitis (aHR = 1.48; 95%CI, 1.06–2.06), unspecified chronic sinusitis (aHR = 1.55; 95%CI, 1.08–2.22), chronic obstructive pulmonary disease (COPD) and other allied conditions (aHR = 1.43; 95%CI, 1.00–2.06), and dyspnea and respiratory abnormalities (aHR = 1.29; 95%CI, 1.00–1.67); there was a suggestion of elevated risk for diseases classified as asthma and reactive airway diseases (aHR = 1.18; 95%CI, 0.98–1.41), including the specific condition, asthma (aHR = 1.35; 95%CI, 0.80–2.27), the symptom, shortness of breath (aHR = 1.50; 95%CI, 0.89–2.54), and the overall classification of chronic respiratory conditions (aHR = 1.18; 95%CI, 0.98–1.43). Exposure to both crude oil and dispersant was positively associated with elevated risk for shortness of breath (HR = 2.24; 95%CI, 1.09–4.64). Conclusions: Among active duty Coast Guard personnel, oil spill clean-up exposures were associated with moderately increased risk for longer term respiratory conditions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Radiative forcing from the 2020 shipping fuel regulation is large but hard to detect

Reduction in aerosol cooling unmasks greenhouse gas warming, exacerbating the rate of future warming. The strict sulfur regulation on shipping fuel implemented in 2020 (IMO2020) presents an opportunity to assess the potential impacts of such emission regulations and the detectability of deliberate aerosol perturbations for climate intervention. Here we employ machine learning to capture cloud natural variability and estimate a radiative forcing of +0.074 ±0.005 W m -2 related to IMO2020 associated with changes in shortwave cloud radiative effect over three low-cloud regions where shipping routes prevail. We find low detectability of the cloud radiative effect of this event, attributed to strong natural variability in cloud albedo and cloud cover. Regionally, detectability is higher for the southeastern Atlantic stratocumulus deck. These results raise concerns that future reductions in aerosol emissions will accelerate warming and that proposed deliberate aerosol perturbations such as marine cloud brightening will need to be substantial in order to overcome the low detectability.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Observations of the Marine Atmospheric Boundary Layer’s Response to a Solar Eclipse

The atmospheric response to the solar eclipse of 8 April 2024 in North America is investigated with a specific focus on the marine atmospheric boundary layer (MABL). We leverage measurements collected during the Third Wind Forecast Improvement Project (WFIP3), including Doppler lidars, sonic anemometers, and thermodynamic profiler data to investigate the atmospheric response across sites that experienced partial eclipse conditions with nearly 90% obscuration. Using these measurements, we examine eclipse-induced changes in key meteorological parameters, such as temperature, wind speed, and turbulent fluxes. Most previous eclipse studies have been conducted over land, whereas this study provides new observations for both coastal and marine environments, offering additional insight into eclipse-driven variability in the MABL. The findings confirm a notable decrease in downwelling shortwave radiation during the eclipse, which results in rapid cooling of surface air. The temperature reduction ranges from $1.2^\circ \text {C}$ to $1.4^\circ \text {C}$ in coastal regions and from $0.3^\circ \text {C}$ to $0.5^\circ \text {C}$ over the ocean. This analysis suggests that the MABL’s higher thermal inertia compared to coastal regions moderates the temperature decrease during the eclipse. Wind speed exhibits a more complex behavior, as it is influenced by both the MABL and preexisting synoptic conditions. Although a reduction in wind speed is observable up to approximately 140 m above ground level (AGL) at more inland sites, at other locations closer to the coast, this reduction is constrained to the lowest 100 m AGL. Turbulence parameters retrieved from sonic anemometers, such as turbulence kinetic energy, turbulent heat flux, and friction velocity, decrease during the eclipse at coastal sites, accompanied by a brief transition of atmospheric stability from unstable to neutral or weakly stable conditions. For the open-ocean sites, the variability in turbulence statistics and atmospheric stability is minimal during the occurrence of the eclipse.

16 TIDAL AND WAVE POWER↗
DOE OSTI2025

Data for "Enhancing Lipid Production in Plant Cells through Automated High-Throughput Genome Engineering and Phenotyping"

Plant bioengineering is a time-consuming and labor-intensive process with no guarantee of achieving desired traits. Here, we present a fast, automated, scalable, high-throughput pipeline for plant bioengineering (FAST-PB) in maize (Zea mays) and Nicotiana benthamiana. FAST-PB enables genome editing and product characterization by integrating automated biofoundry engineering of callus and protoplast cells with single-cell matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS). We first demonstrated that FAST-PB could streamline Golden Gate cloning, with the capacity to construct 96 vectors in parallel. Using FAST-PB in protoplasts, we found that PEG2050 increased transfection efficiency by over 45%. For proof-of-concept, we established a reporter-gene-free method for CRISPR editing and phenotyping via mutation of high chlorophyll fluorescence 136. We show that diverse lipids were enhanced up to 6-fold using CRISPR activation of lipid controlling genes. In callus cells, an automated transformation platform was employed to regenerate plants with enhanced lipid traits through introducing multigene cassettes. Lastly, FAST-PB enabled high-throughput single-cell lipid profiling by integrating MALDI-MS with the biofoundry, protoplast, and callus cells, differentiating engineered and unengineered cells using single-cell lipidomics. These innovations massively increase the throughput of synthetic biology, genome editing, and metabolic engineering and change what is possible using single-cell metabolomics in plants.

AI/ML↗
DOE OSTI2026

Machine Learning Eliminates Reanalysis Warm Bias and Reveals Weaker Winter Surface Cooling Over Arctic Sea Ice

The surface energy budget governs Arctic sea-ice growth/melt, yet observations are sparse, and reanalysis data sets suffer from systematic biases. Here, we train a neural network with observational data to bias-correct hourly ERA5 fluxes over Arctic ice-covered regions (≥70°N; sea-ice concentration >80%) for 1994–2024. Training data cover two full seasonal cycles and different sea-ice regimes. The neural network reduces RMSE for net shortwave radiation by ∼40%, downward longwave radiation by ∼16% and the total surface energy budget by ∼55%, eliminating the wintertime warm bias of ∼4 K in ERA5. Wintertime surface cooling is reduced by ∼50%, yielding thermodynamic ice-growth estimates of ∼80–120 cm, consistent with SMOS–CryoSat satellite thickness increases and in contrast to the 150–200 cm growth implied by ERA5. Our bias-corrected data capture the observed clear/cloudy states of the winter boundary layer and can be used to study Arctic climatology, evaluate climate models and drive sea-ice-ocean models.

Hossain, Akil [Alfred Wegener Institute for Polar ↗
DOE OSTI2025

Utilization of Hemp Processing Waste for 3D Printing of Biocomposites

Unlike stem biomass, the residues after the extraction of cannabidiol (CBD) oil from hemp flower are challenging to utilize because of their high extractive content (~ 40%, mainly lipids) and are typically considered waste and landfilled. This study presented a novel approach to effectively valorize this underutilized hemp processing waste via chemical processing for three-dimensional (3D) printing applications. Hemp processing waste was processed with sodium hydroxide (NaOH) to control extractives for solving nozzle clogging and then applied as a biofiller in polylactic acid (PLA) composites to improve the mechanical strength. The novelty of this work lies in demonstrating that controlled extractive removal via NaOH treatment not only improves processability but also enhances mechanical performance in 3D-printed biocomposites. We systematically investigated the effect of the processed biofiller content (2.5–10 wt%) on the mechanical and thermal properties of the biocomposites. The decrease in the content of extractives reduced the non-structural components and improved the surface compatibility of the hemp waste with the PLA matrix, thereby enhancing the polymer-biofiller interactions. The best performance was achieved at 2.5 wt% loading, where Young’s modulus increased from 2.3 GPa to 2.6 GPa and tensile strength from 42.7 MPa to 48.8 MPa. Interestingly, the complete removal of extractives also reduced the mechanical strength of their biocomposites, indicating the interfacial adhesion effects of extractives. Furthermore, this study provides new insights into balancing extractive content for optimal mechanical properties, offering a sustainable solution for waste valorization in additive manufacturing.

Additive manufacturing↗