Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Effectiveness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Toward a better understanding of the magnetocaloric effect: An experimental and theoretical study of MnFe{sub 4}Si{sub 3}

The intermetallic compound MnFe{sub 4}Si{sub 3} has been studied by high-resolution Time of Flight (TOF) neutron powder diffraction. MnFe{sub 4}Si{sub 3} crystallizes in the hexagonal space group P6{sub 3}/mcm with lattice constants of a=b=6.8043(4) Å and c=4.7254(2) Å at 310 K. Magnetic susceptibility measurements show clearly the magnetic transition from paramagnetism to ferromagnetism at about 302(2) K. Magnetic structure refinements based on neutron powder diffraction data with and without external magnetic field reveal strong evidence on the origin of the large magnetocaloric effect (MCE) in this material as a partial reordering of the spins between ∼270 K and 300 K. In addition, electronic structure calculations using the self-consistent, spin-polarized Tight Binding-Linear MuffinTin Orbital (TB-LMTO) method were also accomplished to address the “coloring problem” (Mn/Fe site preference) as well as the unique ferromagnetic behavior of this intermetallic compound. - Graphical abstract: Theoretical and experimental reinvestigation of the magnetic structure of MnFe{sub 4}Si{sub 3} for a better understanding of its large magnetocaloric effect (MCE). - Highlights: • Strong magnetic transition from paramagnetism to ferromagnetism at about 302(2) K. • MCE associated to a partial reordering of the spins between ∼270 K and 300 K. • DFT calculations show strong relation between MCE and spintronic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Room temperature ductility of NiAl-strengthened ferritic steels: Effects of precipitate microstructure

The effects of precipitate microstructure on the room temperature ductility of a series of carefully designed Fe-Al-Ni-Cr-Mo steels were investigated. Transmission electron microscopy (TEM), ultra small angle X-ray scattering (USAXS), and atom probe tomography (APT) were conducted to quantify the nano-scaled precipitates. The accuracy of the characterization results was verified by a numerical analysis. Three point bending tests results demonstrated that ductility was a function of the precipitate volume fraction and the Al and Ni concentrations in the Fe matrix, these relationships were discussed in terms of possible mechanisms. The ductility was also found to be independent of the precipitate size and inter-particle spacing in the studied range, which was validated by a theoretical model.

36 MATERIALS SCIENCE↗

Temperature effect of elastic anisotropy and internal strain development in advanced nanostructured alloys: An in-situ synchrotron X-ray investigation

Nanostructured ferritic alloys (NFAs) are a promising structural material for advanced nuclear systems due to their exceptional radiation tolerance and high-temperature mechanical properties. Their remarkable properties result from the ultrafine ultrahigh density Y-Ti-O nanoclusters dispersed within the ferritic matrix. In this work, we performed in-situ synchrotron X-ray diffraction tests to study the tensile deformation process of the three types of NFAs: 9YWTV, 14YWT-sm13, and 14YWT-sm170 at both room temperature and elevated temperatures. A technique was developed, combining Kroner’s model and X-ray measurement, to determine the intrinsic monocrystal elastic-stiffness constants, and polycrystal Young’s modulus and Poisson’s ratio of the NFAs. Temperature dependence of elastic anisotropy was observed in the NFAs. An analysis of intergranular strain and strengthening factors determined that 14YWT-sm13 had a higher resistance to temperature softening compared to 9YWTV, attributed to the more effective nanoparticle strengthening during high-temperature mechanical loading.

Gan, Yingye↗

Effects of long-term thermal aging on bulk and local mechanical behavior of ferritic-austenitic duplex stainless steels

Ferritic-austenitic duplex stainless steels (DSS) undergo significant thermal aging embrittlement in service in light water reactors. Specimens of cast CF–3 and CF–8 DSS have been laboratory aged for up to 17,200 h at four different temperatures (280, 320, 360, 400 °C) in order to characterize the aging evolution and mechanical properties. Standard Charpy V-Notch (CVN) impact testing and tensile testing are employed to measure the progression of embrittlement of the steels. Concurrently, nanoindentation measurements are performed to measure the hardening of the individual ferrite and austenite phases. Atom probe tomography (APT) analysis of the ferrite and austenite phases elucidates the relationship between spinodal decomposition of the ferrite and the mechanical effects of aging. The results are discussed to relate the effects of the local microstructure and property changes in the ferrite phase on the overall bulk mechanical evolution of these steels.

Schwarm, Samuel C.↗

Effects of errors in velocity tilt on maximum longitudinal compression during neutralized drift compression of intense beam pulses: I. general description

Neutralized drift compression offers an effective means for particle beam pulse compression and current amplification. In neutralized drift compression, a linear longitudinal velocity tilt (head-to-tail gradient) is applied to the non-relativistic beam pulse, so that the beam pulse compresses as it drifts in the focusing section. The beam current can increase by more than a factor of 100 in the longitudinal direction. We have performed an analytical study of how errors in the velocity tilt acquired by the beam in the induction bunching module limit the maximum longitudinal compression. It is found that the compression ratio is determined by the relative errors in the velocity tilt. That is, one-percent errors may limit the compression to a factor of one hundred. However, a part of the beam pulse where the errors are small may compress to much higher values, which are determined by the initial thermal spread of the beam pulse. It is also shown that sharp jumps in the compressed current density profile can be produced due to overlaying of different parts of the pulse near the focal plane. Examples of slowly varying and rapidly varying errors compared to the beam pulse duration are studied. For beam velocity errors given by a cubic function, the compression ratio can be described analytically. In this limit, a significant portion of the beam pulse is located in the broad wings of the pulse and is poorly compressed. The central part of the compressed pulse is determined by the thermal spread. The scaling law for maximum compression ratio is derived. In addition to a smooth variation in the velocity tilt, fast-changing errors during the pulse may appear in the induction bunching module if the voltage pulse is formed by several pulsed elements. Different parts of the pulse compress nearly simultaneously at the target and the compressed profile may have many peaks. The maximum compression is a function of both thermal spread and the velocity errors. The effects of the finite gap width of the bunching module on compression are analyzed analytically.

43 PARTICLE ACCELERATORS↗

Cold Nuclear Matter Effects on J/psi Production: Intrinsic and Extrinsic Transverse Momentum Effects

Cold nuclear matter effects on J/{psi} production in proton-nucleus and nucleus-nucleus collisions are evaluated taking into account the specific J/{psi}-production kinematics at the partonic level, the shadowing of the initial parton distributions and the absorption in the nuclear matter. We consider two different parton processes for the c{bar c}-pair production: one with collinear gluons and a recoiling gluon in the final state and the other with initial gluons carrying intrinsic transverse momentum. Our results are compared to RHIC observables. The smaller values of the nuclear modification factor R{sub AA} in the forward rapidity region (with respect to the mid rapidity region) are partially explained, therefore potentially reducing the need for recombination effects.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The effect of oxygen enrichment on soot formation and thermal radiation in turbulent, non-premixed methane flames

Non-premixed oxy-fuel combustion of natural gas is used in industrial applications where high-intensity heat is required, such as glass manufacturing and metal forging and shaping. In these applications, the high flame temperatures achieved by oxy-fuel combustion increase radiative heat transfer to the surfaces of interest and soot formation within the flame is desired for further augmentation of radiation. However, the high cost of cryogenic air separation has limited the penetration of oxy-fuel combustion technologies. New approaches to air separation are being developed that may reduce oxygen production costs, but only for intermediate levels of oxygen enrichment of air. To determine the influence of oxygen enrichment on soot formation and radiation, we developed a non-premixed coannular burner in which oxygen concentrations and oxidizer flow rates can be independently varied, to distinguish the effects of turbulent mixing intensity from oxygen enrichment on soot formation and flame radiation. Local radiation intensities, soot concentrations, and soot temperatures have been measured using a thin-film thermopile, planar laser-induced incandescence (LII), and two-color imaging pyrometry, respectively. The measurements show that soot formation increases as the oxygen concentration decreases from 100% to 50%, helping to moderate a decrease in overall flame radiation. An increase in turbulence intensity has a marked effect on flame height, soot formation and thermal radiation, leading to decreases in all of these. The soot temperature decreases with a decrease in the oxygen concentration and increases with an increase in turbulent mixing intensity. Altogether, the results suggest that properly designed oxygen-enriched burners that enhance soot formation for intermediate levels of oxygen purity may be able to achieve thermal radiation intensities as high as 85% of traditional oxy-fuel burners utilizing high-purity oxygen.

03 NATURAL GAS↗

Intrinsic Dosimetry: Elemental Composition Effects on the Thermoluminescence of Commercial Borosilicate Glass

Intrinsic dosimetry is the method of measuring total absorbed dose received by the walls of a container holding radioactive material. By considering this dose in tandem with the physical characteristics of the radioactive material housed within the container, this method can provide enhanced pathway information for interdicted radioactive samples. Thermoluminescence (TL) dosimetry was used to measure ionizing radiation dose effects on stock borosilicate glass. Differences in TL glow curve shape and intensity were observed for glasses from different geographical origins. The different TL signatures strongly correlated with the concentration of alkaline earth metals and the ratio of sodium to the total amount of alkali metal present in the borosilicate glass.

61 RADIATION PROTECTION AND DOSIMETRY↗

Spatial heterogeneity analysis of the effects of urbanization on airport CO2 emissions in China - A geographically weighted approach using nighttime light data

Regional disparities in carbon dioxide (CO2) emissions from airports at the city level are of increasing importance for low-carbon development of the civil aviation sector. However, CO2 emissions from airport operations have rarely been estimated and discussed. We investigate the main driving forces of airport CO2 emissions by using Ordinary Least Square (OLS) and Geographically Weighted Regression (GWR) models, separately, to investigate whether urbanization drives airport CO2 emissions and to investigate spatial heterogeneity at the city level. Nighttime light (NTL) data from satellite observations are adopted as a proxy for urbanization. We obtained energy consumption data by end-use purpose for 70 airports in China and calculated the CO2 emissions from on-ground airport operations. The median CO2 emissions of the 70 sample airports are estimated to be 15.9 million tonnes for 2015. Results from the GWR model indicate that airport CO2 emissions are affected by five main factors: urbanization, foreign direct investment, the share of tertiary industry in gross domestic output, passenger turnover of civil aviation and passenger turnover of railways. The elasticity of urbanization shows an increasing trend from the east of China to the west. The spatial heterogeneity of the CO2 emissions of the five airport clusters that are located in five urban agglomerations is discussed. In order to achieve effective reductions of CO2 emissions from airports, policy-makers should consider the spatial heterogeneity of the major driving factors of carbon emissions in different regions to avoid carbon lock-in.

Airport CO2 emissions↗

Investigating the CO 2 pressure effect on underwater laser-induced plasma emission of Eu and Yb

Laser-induced breakdown spectroscopy (LIBS) is an emerging analytical technique for in situ determination of elements in natural resources. The technique is employed for the study of two rare earth elements (Eu and Yb) in aqueous solutions at pressures ranging from ambient to 250 bars. Underwater plasma is created at ambient and elevated pressures to record LIBS spectra from their solutions using Nd:YAG laser operated at its fundamental wavelength of 1064 nm. The effect of CO2 pressure on the characteristic spectral signatures of these two rare earth elements is presented. Variation of intensity, integrated intensity, and width of selected emission lines with CO2 pressure is explained. The technique could potentially be used for the detection of rare earth elements in oceanic, carbon sequestration, and geothermal fluids.

36 MATERIALS SCIENCE↗

Structure Effects on the Energetics of the Electrochemical Reduction of CO2 by Copper Surfaces

Polycrystalline copper electrocatalysts have been experimentally shown to be capable of reducing CO{sub 2} into CH{sub 4} and C{sub 2}H{sub 4} with relatively high selectivity, and a mechanism has recently been proposed for this reduction on the fcc(211) surface of copper, which was assumed to be the most active facet. In the current work, we use computational methods to explore the effects of the nanostructure of the copper surface and compare the effects of the fcc(111), fcc(100) and fcc(211) facets of copper on the energetics of the electroreduction of CO{sub 2}. The calculations performed in this study generally show that the intermediates in CO{sub 2} reduction are most stabilized by the (211) facet, followed by the (100) facet, with the (111) surface binding the adsorbates most weakly. This leads to the prediction that the (211) facet is the most active surface among the three in producing CH{sub 4} from CO{sub 2}, as well as the by-products H{sub 2} and CO. HCOOH production may be mildly enhanced on the more close-packed surfaces ((111) and (100)) as compared to the (211) facet, due to a change in mechanism from a carboxyl intermediate to a formate intermediate. The results are compared to experimental data on these same surfaces; the predicted trends in voltage requirements are consistent between the experimental and computational data.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Aromatase inhibiting and combined estrogenic effects of parabens and estrogenic effects of other additives in cosmetics

There is concern widely on the increase in human exposure to exogenous (anti)estrogenic compounds. Typical are certain ingredients in cosmetic consumer products such as musks, phthalates and parabens. Monitoring a variety of human samples revealed that these ingredients, including the ones that generally are considered to undergo rapid metabolism, are present at low levels. In this in vitro research individual compounds and combinations of parabens and endogenous estradiol (E{sub 2}) were investigated in the MCF-7 cell proliferation assay. The experimental design applied a concentration addition model (CA). Data were analyzed with the estrogen equivalency (EEQ) and method of isoboles approach. In addition, the catalytic inhibitory properties of parabens on an enzyme involved in a rate limiting step in steroid genesis (aromatase) were studied in human placental microsomes. Our results point to an additive estrogenic effect in a CA model for parabens. In addition, it was found that parabens inhibit aromatase. Noticeably, the effective levels in both our in vitro systems were far higher than the levels detected in human samples. However, estrogenic compounds may contribute in a cumulative way to the circulating estrogen burden. Our calculation for the extra estrogen burden due to exposure to parabens, phthalates and polycyclic musks indicates an insignificant estrogenic load relative to the endogenous or therapeutic estrogen burden.

60 APPLIED LIFE SCIENCES↗