Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ENTHALPY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Reversible Ligand Protonation in Noninnocent Constrained-Geometry-Like Group 4 Complexes

The proligands C 5 H 5 CMe 2 CHPhOx R (R = Me 2 , CHMe 2 , and CMe 3 ) react with M(NMe 2 ) 4 (M = Ti, Zr, and Hf) to give monodeprotonated (Ox R CHPhCMe 2 C 5 H 4 )M(NMe 2 ) 3 , doubly deprotonated (C 5 H 4 CMe 2 CPhOx R )M(NMe 2 ) 2 , or a mixture of both. The observed products depend on reaction conditions, the oxazoline substituent, and the metal center, with 4-t-butyl-oxazoline or Ti giving only the monodeprotonated (Ox R CHPhCMe 2 C 5 H 4 )M(NMe 2 ) 3 . Amine elimination from (Ox R CHPhCMe 2 C 5 H 4 )M(NMe 2 ) 3 to give (C 5 H 4 CMe 2 CPhOx R )M(NMe 2 ) 2 is reversible for 4,4-dimethyl- and 4-isopropyl-oxazoline-based ligands in Zr or Hf complexes. Temperature-dependent kinetic studies of the equilibration of (C 5 H 4 CMe 2 CPhOx Me2 )Zr(NMe 2 ) 2 , HNMe 2 and (Ox Me2 CHPhCMe 2 C 5 H 4 )Zr(NMe 2 ) 3 provide the experimental thermodynamic parameters ΔS° = -17.4 ± 2.6 cal·mol –1 K –1 and ΔH° = -6.8 ± 0.8 kcal·mol –1 . An Eyring plot of the rate constants, determined from the system as it approaches equilibrium, gives the activation entropy and activation enthalpy for the addition of (C 5 H 4 CMe 2 CPhOx Me2 )Zr(NMe 2 ) 2 and HNMe 2 as -36 ± 4 cal·mol –1 K –1 and 8.9 ± 1.3 kcal·mol –1 , respectively; the elimination of HNMe 2 from (Ox Me2 CHPhCMe 2 C 5 H 4 )Zr(NMe 2 ) 3 is characterized by ΔS ‡ = -19 ± 5 cal·mol –1 K –1 and ΔH ‡ = 15.7 ± 1.5 kcal·mol –1 . DFT computational models indicate a single-step, nonlinear transfer of the H between the benzylic position of the noninnocent, oxazoline-coordinated ligand and NMe 2 . Computations also confirm the negative activation entropy and the trends in the barriers support the experimental results. Together, these studies indicate the importance of steric effects from the oxazoline ligand, metal center, ancillary ligands, and leaving group on the shuttling of the proton between HNMe 2 and the noninnocent ligand. Finally, these effects suggest that coordination of oxazoline to the metal center is a key part of the benzylic deprotonation and noninnocent behavior of the cyclopentadienyl-oxazoline ligand.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Carbon Dioxide Insertion into Rhenium Hydrides as a Probe for the Impact of Solvent on Linear Free Energy Relationships between Thermodynamic and Kinetic Hydricity

The kinetics of CO 2 insertion into electronically different Re( R bpy)(CO) 3 H ( R bpy = 4,4'-R-2,2'- bipyridine; R = OMe, t Bu, Me, H, Br, COOMe, CF 3 ) complexes to form Re( R bpy)(CO) 3 {OC(H)O} compounds were determined in acetone, dimethylacetamide (DMAc), dimethylformamide (DMF), dimethylsulfoxide (DMSO), and 3-methoxypropionitrile (3-MPN) and compared with previous data in acetonitrile (MeCN). The rates of CO 2 insertion for any one complex of the type Re(Rbpy)(CO) 3 H in different solvents correlates with the Dimroth-Reichardt (E T (30)) solvent parameter. Hammett plots in each solvent indicate that insertion reactions are faster for bpy ligands with electron-donating groups. There is, however, no correlation between the slope of the Hammett plot in different solvents and any common solvent parameter. Similarly, the enthalpies and entropies of activation and kinetic isotope effects associated with CO 2 insertion into Re(bpy)(CO) 3 H in different solvents do not correlate with any common solvent parameters. Theoretical calculations were used to determine the relative thermodynamic hydricities of Re( R bpy)(CO) 3 H type complexes in MeCN, acetone, DMF, and DMSO and in each solvent complexes with more electron-donating substituents on the bpy ligand are stronger hydride donors. Linear Free Energy Relationships (LFERs) between calculated thermodynamic and experimental kinetic hydricity, as measured through CO 2 insertion reactions, were observed in MeCN, acetone, DMF, and DMSO. Furthermore, the slopes of the LFERs correlate with the dielectric constant of the solvent. Overall, this work provides fundamental information about the thermodynamics and kinetics of hydride transfer reactions in different solvents, which is valuable for catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Re-examination of the Claimed Isolation of Stable Noncyclic 1,2-Disulfoxides

Re-examination of the claimed isolation and X-ray characterization of di-p-tolyl and dimesityl 1,2-disulfoxides from thermolysis of the corresponding aryl sulfinimines and thiosulfinates showed that the isolated disulfide dioxides are instead the wellknown isomeric thiosulfonates, as confirmed by XAS, DART-MS, X-ray, IR and NMR methods. Concerns with the original X-ray structures are addressed. Our results agree with the DFT prediction of very weak diaryl 1,2-disulfoxide S–S bond dissociation enthalpies. For now, room-temperature-stable noncyclic 1,2-disulfoxides remain unknown.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Defect-Limited Mobility and Defect Thermochemistry in Mixed A-Cation Tin Perovskites: (CH3NH3)1-xCsxSnBr3

Hybrid organic-inorganic semiconductors crystallizing in the perovskite structure present a significant opportunity for realizing defect-tolerant semiconductors. In this work, we examine the solid solution, (CH3NH3)1-xCsxSnBr3, and identify the thermochemistry dictating the intrinsic carrier concentrations and how local structural distortions influences this electronic behavior. This family of compounds exhibits the expected systematic trend in decreasing optical gap with the cesium to methylammonium A-site mixing ratio, x, in the visible region. However, the carrier mobility, as determined from time-resolved microwave conductivity measurements, trends opposite to that expected from first-principles calculations combined with Boltzmann scattering theory calculations of the carrier mobility. We propose that this is a result of increasing carrier scattering with x in (CH3NH3)1-xCsxSnBr3 due to a significant increase in the carrier density with x. By examining the dependence of the carrier density as a function of x, we infer the compositional-dependence of the average enthalpy and nonconfigurational entropy per defect. While diffraction reveals a cubic aristotypic perovskite structure as a function of x at room temperature, the pair distribution functions obtained from synchrotron X-ray total scattering from these materials are better described by symmetry-adapted displacement modes of the Pm3m crystal structure, which we attribute to a large degree of anharmonic dynamics of the atom positions. This analysis shows that CH3NH3+-rich compositions retain mostly linear Sn-Br-Sn bonding environments through the displacements, while Cs+-rich compositions lead to more significantly bent Sn-Br-Sn environments. We propose that these bent bonding arrangements in Cs-rich compositions yield a higher propensity for defect formation. This also provides a rationale for carrier trapping that gives rise to anomalous microwave transients. Together, these results provide insight into the structure-dynamics-properties relationships in this highly anharmonic system with high amplitude atomic motions and low defect formation energies.

defect thermochemistry↗
DOE OSTI2025

LASSO for CALPHAD Model Selection Enables Data-Efficient Thermodynamic Modeling: An Application in Thermochemical Hydrogen Production Materials

Phenomenological CALPHAD (CALculation of PHAse Diagrams) models, widely used for multicomponent materials, often contain a considerable number of parameters and require fitting using data from a relatively small number of experimental measurements or theoretical calculations. Sometimes these parameters are introduced for the purpose of improving model fits but without clear physical justification, which leads to overparametrized models with poor generalization performance. Automated approaches for optimal model selection based on the available data therefore become critical. Here, in this work, a least absolute shrinkage and selection operator (LASSO)-based approach is developed for model selection by leveraging the linearity of the CALPHAD model with respect to its parameters to convert the model selection and fitting to a LASSO minimization problem. We demonstrate its utility for thermodynamic modeling of thermochemical hydrogen (TCH) production materials using lanthanum strontium manganite (LSM) as an example. Various TCH-relevant properties, including oxygen stoichiometry as a function of oxygen partial pressure, enthalpy of reduction, and entropy of reduction, are successfully predicted with reasonable accuracy using a minimal set of model parameters. Importantly, the model selection and fitting involve minimal human decision; it can therefore be applied to high-throughput DFT defect calculations and yield efficient workflows for TCH material modeling and optimization.

CALPHAD↗
DOE OSTI2020

Computationally Predicted High-Throughput Free-Energy Phase Diagrams for the Discovery of Solid-State Hydrogen Storage Reactions

The design of multinary solid-state material systems that undergo reversible phase changes via changes in temperature and pressure provides a potential means of safely storing hydrogen. However, fully mapping the stabilities of known or newly targeted compounds relative to competing phases at reaction conditions has previously required many stringent experiments or computationally demanding calculations of each compound’s change in Gibbs energy with respect to temperature, G(T). Here, we have extended the approach of constructing chemical potential phase diagrams based on ΔG f (T) to enable the analysis of phase stability at non-zero temperatures. We first performed density functional theory calculations to compute the formation enthalpies of binary, ternary, and quaternary compounds within several compositional spaces of current interest for solid-state hydrogen storage. Temperature effects on solid compound stability were then accounted for using our recently introduced machine learned descriptor for the temperature-dependent contribution G δ (T) to the Gibbs energy G(T). From these Gibbs energies, we evaluated each compound’s stability relative to competing compounds over a wide range of conditions and show using chemical potential and composition phase diagrams that the predicted stable phases and H2 release reactions are consistent with experimental observations. This demonstrates that our approach rapidly computes the thermochemistry of hydrogen release reactions for compounds at sufficiently high accuracy relative to experiment to provide a powerful framework for analyzing hydrogen storage materials. This framework based on G(T) enables the accelerated discovery of active materials for a variety of technologies that rely on solid-state reactions involving these materials.

08 HYDROGEN↗
DOE OSTI2021

Process Engineering to Increase the Layered Phase Concentration in the Immediate Products of Flame Spray Pyrolysis

Flame-spray-pyrolysis (FSP) is a robust and scalable process to synthesize particles at the commodity-scale. FSP has been used to produce the precursor powders which were converted to the layered structure $(R\bar{3m} \text { phase})$ by a postannealing step in making nickel-rich cathode materials (NCMs). Theoretically, the high flame temperature (normally >1500 K) in FSP can provide adequate energy for the phase conversion from rock-salt to layered structures and potentially enables one-step synthesis. However, the high flame temperature is a critical issue to cause lithium loss and structural degradation, preventing the formation of the layered phase. Here, guided by the gaseous nucleation theory, we implemented several FSP processes with different solution recipes. The layered phase concentration in the as-burned products can be increased with the solution enthalpies. By adding a rapid quench step to suppress the lithium loss and phase degradation, the layered phase can be further increased. This work contributes new ideas to innovating process regarding the process efficiency and throughput of manufacturing cathode materials at a large scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Stability Criteria for Self-Propagating Reaction Waves in Co/Al Multilayers

The propagation of self-sustained formation reactions in sputter-deposited Co/Al multilayers is known to exhibit a design-dependent instability. Multilayers having thin bilayers (<55 nm period) exhibit stable propagating waves, whereas those with a larger period react unstably. The specific two-dimensional (2D) instability observed involves the transverse propagation of a band in front of a stalled front commonly referred to as a “spin band.” Previous finite-element studies have shown that these instabilities are thermodynamically driven by the forward conduction of heat away from the flame front. However, the magnitude of that loss is inherently tied to the bilayer design in traditional bimetallic multilayers, which couples any proposed stability criteria to a varying critical diffusion distance. Here, this work utilizes a recently developed class of materials known as “inert-mediated reactive multilayers” to decouple the thermodynamic and kinetic contributions to propagating wave stability by reducing the stored chemical energy density in normally stable bilayer designs. By depositing an inert product phase (B2-CoAl) within the mid-plane of Co and Al reactant layers, spin instabilities arise as a function of both diluted volume and critical diffusion distance. From there, a stability criterion is determined for Co/Al multilayers based on enthalpy loss from the reaction zone, and its physical significance is explored.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Facile Interfacial Reduction Suppresses Redox Chemical Expansion and Promotes the Polaronic to Ionic Transition in Mixed Conducting (Pr,Ce)O 2−δ Nanoparticles

Mixed ionic/electronic conductors (MIECs) are essential components of solid-state electrochemical devices, such as solid oxide fuel/electrolysis cells. For efficient performance, MIECs are typically nanostructured, to enhance the reaction kinetics. However, the effect of nanostructuring on MIEC chemo-mechanical coupling and transport properties, which also impact cell durability and efficiency, has not yet been well understood. Here, in this work, Pr 0.2 Ce 0.8 O 2−δ (PCO20) nanopowders were prepared by coprecipitation, then sintered in a modified dilatometer at three different temperatures (600, 725, and 850 °C) for microstructure evolution, resulting in three samples with different average particle sizes (23, 30, and 53 nm). The chemical strain and electronic/ionic conductivity were then measured simultaneously on stable nanostructures in four isotherms from 550 to 400 °C with steps in pO 2 (1 to 10 –4 atm O 2 ). A microcrystalline bar was prepared and measured for comparison. Particle size reduction led to a monotonically decreasing isothermal redox chemical strain, confirmed by in situ high-temperature, controlled-atmosphere XRD measurements. The corresponding conductivity measurements provided defect chemical insight into the particle size-dependent chemical expansion behavior. The significant weakening of the pO 2 dependence and decreased activation energy for electrical conduction with decreasing particle size indicated a decrease in the reduction enthalpy of PCO, shifting the transition from (Pr) polaronic to ionic behavior to higher pO 2 . STEM-EELS measurements confirmed the majority of Pr was reduced to 3+ in the nanoparticles, while Ce remained 4+. These results demonstrate suppression of deleterious chemical expansion and tailoring of the dominant charge carrier simply through controlling the particle size, providing insights for MIEC microstructural design.

ceria↗
DOE OSTI2026

Designing the Platinum Catalyst Layer for Improved Performance and Durability in Anion Exchange Membrane Water Electrolysis

To lower the cost of hydrogen produced by anion exchange membrane water electrolysis (AEMWE), it is critical to reduce the use of platinum group metal (PGM) catalysts within the device. While iridium has been successfully replaced with PGM-free catalysts at the anode, platinum-based (Pt) cathode catalysts are still required to meet the activity and durability targets. This study investigates the impact of commercial Pt/C catalyst loading, ionomer type and content, and electrode fabrication method on the cathode catalyst layer properties and AEMWE performance with the aim of determining the feasibility of reduced Pt loadings. While increased Pt loading is found to improve beginning-of-life performance, the effects are minimal above 0.6 mg/cm 2 . Ink characterization shows that ionomer type and content affect the ink stability, particle size, and percent of unbound ionomer, which further impact the homogeneity of the sprayed catalyst layers. The 5% PiperION cathode exhibited the highest performance, which may be attributed to a balance between the small particle size and the low proportion of unbound ionomer, minimizing kinetic and transport losses. Theoretical calculations show that the ionomers interact differently with the Pt surface, causing different surface charges and water adsorption strength and activating different mechanisms for hydrogen evolution. Pt-PiperION lowered the enthalpy of water-splitting by 0.1 eV compared to Pt alone and allowed for equal site access between adsorbed H* and OH* (both adsorbed at circa −2.2 eV). Although catalyst-coated membrane (CCM) fabrication techniques are desirable for scale-up, no performance enhancement is observed compared with the catalyst-coated substrate approach. Durability, as measured by degradation rates, Pt loss, and catalyst layer restructuring, was found to improve with increased Pt loadings, higher ionomer content, and CCM architectures. These findings provide important insight into the significant role of the cathode in AEMWE and strategies for maintaining the performance with low Pt loading or PGM-free catalysts.

08 HYDROGEN↗
DOE OSTI2019

Amorphous TiCu-Based Additives for Improving Hydrogen Storage Properties of Magnesium Hydride

Magnesium hydride has long been regarded as a promising candidate material for hydrogen and heat storage due to its high hydrogen capacity, reversibility, and low cost. Catalytic doping has been demonstrated as one of the most effective methods to improve hydrogen storage properties of MgH 2 . In this study, amorphous Ti 45 Cu 41 Ni 9 Zr 5 and Ti 40 Cu 47 Zr 10 Sn 3 alloys are used as additives for MgH 2 . Nanostructured MgH 2 doped with amorphous or crystalline TiCu-based alloys are prepared by using a high-energy mechanochemical synthesis method. Results show that the amorphous TiCu additives provide enhanced catalytic effects compared to crystalline alloys of the same composition. Doping MgH 2 using an amorphous Ti 45 Cu 41 Ni 9 Zr 5 alloy yielded improved dehydrogenation kinetics compared to using crystalline Ti 40 Cu 47 Zr 10 Sn 3 alloy. The analysis using transmission electron microscopy reveals that there are nanostructured catalytic particles uniformly distributed in the amorphous TiCu-catalyzed MgH 2 . The MgH 2 system catalyzed by amorphous TiCu-based alloy shows little degradation during hydrogenation and dehydrogenation cycling at 300 °C. The amorphous TiCu-based catalysts are thermally stable at temperatures up to 360 °C. Heating the amorphous Ti 45 Cu 41 Ni 9 Zr 5 -catalyzed MgH 2 to temperatures above 360 °C led to disproportionation of the catalyst alloy and the formation of MgCu 2 and Ti 2 Cu. In addition, PCI analysis of the amorphous Ti 45 Cu 41 Ni 9 Zr 5 -catalyzed MgH 2 shows a slight increase in hydrogen equilibrium pressure, resulting in a reaction enthalpy of -78.7 kJ/mol • H 2 and an entropy of 145.0 J/K•mol•H 2 . As a result, the entropy calculated from this study is approximately 10 J/K•mol•H 2 higher than values previously reported for undoped and catalyzed Mg-H systems.

08 HYDROGEN↗
DOE OSTI2019

Designing Multiscale Porous Metal by Simple Dealloying with 3D Morphological Evolution Mechanism Revealed via X-ray Nano-tomography

Designing materials with multiscale, hierarchical structure is critical to drive the advancement of new technology. Specifically, porous metals with multiscale porosity from nanometer to micrometer sizes would lead to enhanced physical and chemical properties—the micron-sized pores can increase the effective diffusivity of ion transport within the porous media, and the nano-sized pores provide high specific surface area, enabling functionalities that are unique to nanoporous metals. A new ternary precursor alloy selection concept utilizing the different mixing enthalpies is demonstrated in this work for the design of multiscale, bimodal porous copper from a simple, one-step dealloying of Cu–Fe–Al ternary alloy. The nanoporosity in the bimodal porous structure is formed from dealloying of the Cu-rich phase, whereas the microporosity is controlled by dissolving the Fe-rich phase, determined by both the initial Fe particle size and sintering profile. In addition to advancing the materials design method, the multiscale pore formation during dealloying was directly visualized and quantified via an interrupted in situ synchrotron X-ray nano-tomography. The 3D morphological analysis on tortuosity showed that the presence of the microporosity can compensate the increase of the diffusion path length due to nanoporosity, which facilitates diffusion within the porous structure. Altogether the focus of the work is to introduce a new strategy to design multiscale porous metals with enhanced transport properties, and sheds light on the fundamental mechanisms on the 3D morphological evolution of the system using advanced synchrotron X-ray nano-tomography for future materials development and applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Molecular Recognition at Mineral Interfaces: Implications for the Beneficiation of Rare Earth Ores

Ce-bastnäsite is the single largest mineral source for light rare-earth elements. In view of the growing industrial importance of rare-earth minerals, it is critical to develop more efficient methods for separating the valuable rare-earth-containing minerals from the surrounding gangue. In this work, we employ a combination of periodic density functional theory (DFT) and molecular mechanics (MM) calculations together with the de novo molecular design program HostDesigner to identify bis-phosphinate ligands that preferentially bind to the (100) Ce-bastnäsite surface rather than the (104) calcite surface. DFT calculations for a simple phosphinate ligand were employed to qualitatively understand key behaviors involved in ligand–metal, ligand–solvent, and solvent–metal interactions. These insights were then used to guide the search for flexible, rigid, and semirigid hydrocarbon linkers to identify candidate bis-phosphinate ligands with the potential to bind preferentially to Ce-bastnäsite. Among the five most promising bis-phosphinate ligands suggested by theoretical studies, three ligands were synthesized and their adsorption characteristics to bastnäsite (100) interfaces were characterized using vibrational sum-frequency (vSFG) spectroscopy, attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, and isothermal titration calorimetry (ITC). The efficacy of the selective interfacial molecular binding was demonstrated by identifying a bis-phosphinate ligand capable of providing an overall higher surface coverage of alkyl groups relative to a monophosphinate ligand. The results highlight the interplay between adsorption binding strength and maximum surface coverage in determining ligand efficiency to render the mineral surface hydrophobic. DFT calculations further indicate that all tested ligands have higher affinity for Ce-bastnäsite than for calcite. Finally, this is consistent with the ITC data showing stronger adsorption enthalpy to bastnäsite than to calcite, making these ligands promising candidates for selective flotation of Ce-bastnäsite.

58 GEOSCIENCES↗
DOE OSTI2022

Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability

Here, this study reports on the use of sodium alginate to effectively stabilize sodium sulfate decahydrate (Na 2 SO 4 ∙10H 2 O, SSD) based phase change material (PCM) for application as a thermal energy storage material. Alginate/SSD composite PCMs were prepared by blending SSD with different concentrations of alginate polymer. The resulting composite PCMs demonstrate high phase change enthalpy ~160 J/g and extended cycling stability compared to existing PCM composites. The analysis carried out by optical microscopy, X-ray scattering, and periodic density functional theory (DFT) calculations demonstrated that the stabilization effect was caused by the interplay between ionic and hydrogen bond interactions between the alginate and SSD. Additionally, the variation in mechanical properties of PCM composites with polymer concentrations made it possible to formulate a composite that maintains stable performance after 3D printing. The advanced properties make this composite a promising candidate for application as a thermal energy storage material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Investigating Fast Scanning Calorimetry and Differential Scanning Calorimetry as Screening Tools for Thermoset Polymer Material Compatibility with Laser-Based Powder Bed Fusion

As additive manufacturing (AM) technology has developed and progressed, a constant topic of research in the area is expanding the library of materials to be used with these techniques. Among AM methods that utilize polymers, laser-based powder bed fusion (PBF-LB) has preferentially used thermoplastic polymers as its starting materials, but the deposition and material joining method employed in PBF-LB may also be compatible with powdered thermoset polymer precursors as feedstocks. To assess the compatibility of candidate thermosetting polymers and PBF-LB, characterization techniques and protocols that link fundamental material behavior to material behavior in the processing environment are needed. Therefore, the objectives of this work are to compare the curing behavior measured with two different calorimetry techniques that can operate in different heating rate regimes, differential scanning calorimetry (DSC) and fast scanning calorimetry (FSC), and to assess the capabilities of these techniques to act as materials screening tools for PBF-LB. A commercial polyester powder coating is used as a model material to evaluate the potential of obtaining complimentary information for material screening through a combination of calorimetry methods, and its non-isothermal curing behavior is measured at heating rates between 5 °C/min and 7500 °C/min. Curing exotherms are observed with both calorimetry techniques, and comparing the enthalpy associated with curing shows that incomplete curing occurs at higher heating rates, with relative conversion values of approximately 30%. The curing data are fit with two isoconversional models, Friedman and Starink, which show a reduced activation energy at higher heating rates as well, signifying a lower barrier to curing at the conditions used in the FSC experiments. Overall, the results of this work indicate that using these two calorimetry techniques as tiered screening tools can provide valuable information about how curing may proceed in PBF-LB and inform materials selection and design activities for additive manufacturing.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Surface vs Homogeneous Organo-Hafnium Catalyst Ion-Pairing and Ligand Effects on Ethylene Homo- and Copolymerizations

Heterogeneous catalysts have long dominated polyethylene and polypropylene production, but understanding their catalysis is challenged by uncertainties in active site structures and percentages. Surface-bound organometallic catalysts are an emerging strategy to combine successful homogeneous catalysts having well-understood structures, relatively high percentages of active sites, and exceptional control of selectivity, with the attractions of surface catalysts, to transition promising homogeneous systems to large-scale heterogeneous ones. Nevertheless, surface-bound olefin polymerization catalysts typically produce ultrahigh M w ’s but with low activity and comonomer selectivity. Here, we report the systematic synthesis and characterization of a series of pyridylamido–Hf complexes and their corresponding surface catalysts chemisorbed on sulfated alumina (AlS) and zirconia (ZrS). Comparative ethylene homo- and 1-octene copolymerizations reveal similar activity and 1-octene selectivity trends in the homogeneous and heterogeneous systems. For the surface pyridylamido–Hf catalyst series, large variations in activity (up to 10×) and 1-octene incorporation (up to 28×) are achieved by ligand and support manipulation. Interestingly, while the homogeneous catalysts exhibit positive comonomer effects in ethylene/1-octene copolymerization, the surface catalysts behave oppositely. Extended X-ray absorption fine structure (EXAFS) reveals significantly elongated Hf···O bond distances vs typical Hf–O covalent bonds (2.06 vs 1.97 Å). Furthermore, density functional theory (DFT) analysis of the heterolytic ion pair separation enthalpies, olefin insertion energetics, and NBO/Bader charges also suggest electrostatic Hf cation–anionic support binding and catalytic patterns, which are modulated by the ion-pairing energetics and ligand architecture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Mechanism and kinetics of light alkane dehydrogenation and cracking over isolated Ga species in Ga/H-MFI

The objective of this study is to examine the mechanisms and kinetics of C2H6 dehydrogenation and n-C4H10 dehydrogenation and cracking over isolated Ga species in Ga/HMFI and to compare these results to those reported previously for C3H8 dehydrogenation and cracking. C2H6 dehydrogenation is found to be catalyzed by both [GaH]2+ and [GaH2]+ cations at similar turnover frequencies. Rate measurements over Ga/H-MFI containing predominantly [GaH2]+ cations reveal that C2H6 dehydrogenation rates exhibit a Langmuir.Hinshelwood dependence on C2H6 partial pressure at elevated temperatures (>730 K), consistent with the involvement of chemisorbed [C2H5.GaH]+ species. The reaction kinetics suggest that C2H6 dehydrogenation proceeds via heterolytic C-H cleavage of adsorbed C2H6 by [GaH2]+ cations to form H2 and [C2H5-GaH]+ species, which further decompose via β-hydride elimination to form C2H4. By contrast, C4H10 dehydrogenation and both terminal and central cracking are catalyzed exclusively by [GaH]2+ cations. All three reactions exhibit a Langmuir-Hinshelwood dependence on C4H10 partial pressure and are inhibited by H2. Ratios of dehydrogenation to cracking (total) and terminal to central cracking are approximately independent of C4H10 partial pressure consistent with the involvement of a common C4H10-derived surface intermediate. The observed reaction kinetics are consistent with an alkyl-mediated mechanism occurring over [GaH]2+, analogous to that reported previously for C3H8 dehydrogenation/cracking over Ga/H-MFI (Phadke, N. M.; et al. J. Am. Chem. Soc. 2019, 141, 1614-1627). The mechanism proceeds via facile, heterolytic dissociation of adsorbed C4H10 to form [C4H9-GaH]+-H+ cation pairs via methyl C-H-activated pathways. Dehydrogenation then proceeds via β-hydride elimination, respectively, forming butene, while terminal and central cracking proceed via C-H-activated H+ attack. Methylene activation was also considered but found to occur at a significantly lower rate. Theoretical analysis of the proposed reaction pathways leads to apparent activation enthalpies in good agreement with values extracted from the measured kinetics, thereby supporting the proposed pathways and the roles of [GaH]2+ and [GaH2]+ cations in the dehydrogenation and cracking of light alkanes on Ga/H-MFI.

Phadke, NM↗
DOE OSTI2021

Entropic Control of HD Exchange Rates over Dilute Pd-in-Au Alloy Nanoparticle Catalysts

Dilute Pd-in-Au alloy catalysts are promising materials for selective hydrogenation catalysis. Extensive surface science studies have contributed mechanistic insight on the energetic aspect of hydrogen dissociation, migration and recombination on dilute alloy systems. Yet, translating these fundamental concepts to the kinetics and free energy of hydrogen dissociation on nanoparticle catalysts operating at ambient pressures and temperatures remains challenging. Here, the effect of the Pd concentration and Pd ensemble size on the catalytic activity, apparent activation energy and rate limiting process is addressed by combining experiment and theory. Experiments in a flow reactor show that a compositional change from 4 to 8 atm% Pd of the Pd-in-Au alloy catalyst leads to strong increase in activity, even exceeding the activity per Pd atom of monometallic Pd under the same conditions, albeit with an increase in apparent activation energy. First-principles calculations show that the rate and apparent activation enthalpy for HD exchange increase when increasing the Pd ensemble size from single Pd atoms to Pd trimers in a Au surface, suggesting that the ensemble size distribution shifts from mainly single Pd atoms on the 4 atm% Pd alloy to larger Pd ensembles of at least three atoms for the 8 atm% Pd/Au catalyst. The DFT studies also indicated that the rate-controlling process is different: H 2 (D 2 ) dissociation determines the rate for single atoms whereas recombination of adsorbed H and D determines the rate on Pd trimers. Both experiment and theory suggest that the increased reaction rate with increasing Pd content and ensemble size stems from an entropic driving force. Lastly, our results support hydrogen migration between Pd sites via Au and indicate that the dilute alloy design prevents the formation of subsurface hydrogen, which is crucial in achieving high selectivity in hydrogenation catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗