SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The present disclosure generally relates to organic photosensitive optoelectronic devices and polaron pair recombination dynamics to impact efficiency and open circuit voltages of organic solar cells. The present disclosure also relates, in part, to methods of making organic photosensitive optoelectronic devices comprising the same.
For presentation at the 2023 8th Annual Tritium Science Technical Exchange, PNNL, September 26-27, 2023.
Efficient utilization of long-term deep geologic storage repositories is critical for the large-scale deployment of nuclear energy. As the minor actinides (americium and curium) are the largest contributor to the decay heat of used nuclear fuel after a few hundred years, their removal from used fuel prior to disposal can significantly increase the amount of waste that can be stored in a given volume. The development of ligands that can effectively separate the minor actinides from other components of used nuclear fuel are crucial to efficient utilization of geological storage repositories. N,N,N’,N’-tetraoctyl diglycolamide (TODGA) is a promising extractant for the separation of lanthanides and the minor actinides from other components of used nuclear fuel. While the use of TODGA in f-element separations has been investigated in process-based formulations, gas-phase metal ion cluster experiments enable the study of covalent interactions in reprocessing systems absent from solvent effects. Exploring fundamental differences in lanthanide-ligand covalent interactions can impact the development and implementation of actinide-lanthanide separation systems in nuclear fuels reprocessing. In this study, lanthanide-TODGA clusters were synthesized in the gas-phase and identified using mass spectrometry fragmentation experiments. Large europium and samarium clusters were identified that contained up to 8 and 10 bound TODGA ligands, respectively; this was surprising due to the size and multidentate binding that is normal for TODGA. In addition, while smaller clusters showed evidence of sequential ligand fragmentation, larger clusters displayed the loss of neutral TODGA with applied collision voltage. Interestingly, the voltage required for this removal decreased as more TODGA ligands were bound to the metal, suggesting that the metal coordination sphere was becoming more saturated and TODGA ligands were more weakly bound as the clusters got larger.
Here, photodissociation of pyruvic acid (PA) was studied in the gas-phase at 193 nm using two complementary techniques. The time-sliced velocity map imaging arrangement was used to determine kinetic energy release distributions of fragments and estimate dissociation timescales. The multiplexed photoionization mass spectrometer setup was used to identify and quantify photoproducts, including isomers and free radicals, by their mass-to-charge ratios, photoionization spectra, and kinetic time profiles. Using these two techniques, it is possible to observe the major dissociation products of PA photodissociation: CO 2 , CO, H, OH, HCO, CH 2 CO, CH 3 CO, and CH 3 . Acetaldehyde and vinyl alcohol are minor primary photoproducts at 193 nm, but products that are known to arise from their unimolecular dissociation, such as HCO, H 2 CO, and CH 4 , are identified and quantified. A multivariate analysis that takes into account the yields of the observed products and assumes a set of feasible primary dissociation reactions provides a reasonable description of the photoinitiated chemistry of PA despite the necessary simplifications caused by the complexity of the dissociation. These experiments offer the first comprehensive description of the dissociation pathways of PA initiated on the S 3 excited state. Most of the observed products and yields are rationalized on the basis of three reaction mechanisms: (i) decarboxylation terminating in CO 2 + other primary products (~50%); (ii) Norrish type I dissociation typical of carbonyls (~30%); and (iii) O—H and C—H bond fission reactions generating the H atom (~10%). The analysis shows that most of the dissociation reactions create more than two products. This observation is not surprising considering the high excitation energy (~51 800 cm –1 ) and fairly low energy required for dissociation of PA. We find that two-body fragmentation processes yielding CO 2 are minor, and the expected, unstable primary co-fragment, methylhydroxycarbene, is not observed because it probably undergoes fast secondary dissociation and/or isomerization. Norrish type I dissociation pathways generate OH and only small yields of CH 3 CO and HOCO, which have low dissociation energies and further decompose via three-body fragmentation processes. Experiments with d 1 -PA (CH 3 COCOOD) support the interpretations. The dissociation on S 3 is fast, as indicated by the products’ recoil angular anisotropy, but the roles of internal conversion and intersystem crossing to lower states are yet to be determined.
Here, we have observed details of the internal motion and dissociation channels in photoexcited carbon disulfide (CS 2 ) using time-resolved x-ray scattering (TRXS). Photoexcitation of gas-phase CS 2 with a 200 nm laser pulse launches oscillatory bending and stretching motion, leading to dissociation of atomic sulfur in under a picosecond. During the first 300 fs following excitation, we observe significant changes in the vibrational frequency as well as some dissociation of the C–S bond, leading to atomic sulfur in the both 1 D and 3 P states. Beyond 1400 fs, the dissociation is consistent with primarily 3 P atomic sulfur dissociation. This channel-resolved measurement of the dissociation time is based on our analysis of the time-windowed dissociation radial velocity distribution, which is measured using the temporal Fourier transform of the TRXS data aided by a Hough transform that extracts the slopes of linear features in an image. The relative strength of the two dissociation channels reflects both their branching ratio and differences in the spread of their dissociation times. Measuring the time-resolved dissociation radial velocity distribution aids the resolution of discrepancies between models for dissociation proposed by prior photoelectron spectroscopy work.
Here, the photodissociation dynamics of the tert-butyl perthiyl (t-BuSS) radical are investigated by fast-beam coincidence translational spectroscopy. A fast (6 keV-8 keV) beam of neutral t-BuSS radicals is produced via photodetachment of the corresponding anion, followed by photodissociation at 248 nm (5.00 eV) or 193 nm (6.42 eV) and coincident detection of the neutral products. Photofragment mass and translational energy distributions are obtained at both wavelengths. At 248 nm, the dominant product channel (90%) is found to be S loss, with a product translational energy distribution that peaks close to the maximum available energy and an anisotropic photofragment angular distribution, indicating dissociation along a repulsive excited state. A minor channel (10%) leading to the formation of S 2 + t-Bu is also observed. At 193 nm, both two- and three-body dissociation are observed. The formation of S 2 + t-Bu is the dominant two-body product channel, with multiple electronic states of the S 2 molecule produced via excited-state dissociation processes. The formation of S + t-BuS is a minor two-body channel at this dissociation energy. The three-body channels are S 2 + H + isobutene, S 2 + CH 3 + propene, and S + SH + isobutene. The first two of these channels result from a sequential dissociation process in which the loss of S 2 from t-BuSS results in ground-state t-Bu with sufficient internal energy to undergo secondary fragmentation. The third three-body channel, S + SH + isobutene, is attributed to the loss of internally excited HS 2 from t-BuSS, which then rapidly dissociates to form S + SH in an asynchronous concerted dissociation process.
Here, the dynamics of dissociative electron attachment to ethanol is experimentally investigated at the Feshbach resonance formed with incident electron energies near 9.5 eV. Highly differential laboratory-frame momentum distributions of OH – fragments are measured for a series of energies spanning the resonance width, using the velocity-map-imaging technique. The OH – kinetic-energy distribution indicates that the C-O breaking dissociation process could either be a three-body dissociation or a two-body dissociation with significant rovibrational excited fragments. The small, but significant, anisotropy in the OH – angular distribution provides signatures of the molecular symmetry of the associated resonant state under the axial recoil approximation, which assumes the dissociation is much faster than any rotation of the dissociation axis. Within these assumptions, the 9.5-eV Feshbach resonance can be assigned to the electronic transition from the ($10a'$) orbital with its ground-state C s symmetry to the empty ($4a''$) level, involving the simultaneous electron attachment. This dynamics could be a model for C-O dissociation in larger alcohols and ethers.
The kinetics of prompt dissociation involves rovibrationally excited species (generally formed by exothermic reactions) which may dissociate or isomerize prior to thermalization via collisions with the bath gas. Treating such rovibrationally excited species (so-called "hot" species) with standard kinetic phenomenology may result in incorrect macroscopic representation of their reactivity. Here this work presents the first fully automated methodology for the calculation of prompt effects of a chosen species in a kinetic mechanism, including (i) reaction selection; (ii) theoretical calculation of rate constants and prompt branching fractions; and (iii) final rate constant fitting. The energy partition between hot fragments is estimated using a variety of statistical models, including a new physically sound microcanonical statistical model based on the rovibrational density of states of the fragments. The methodology is validated against literature data for the prompt dissociations of HCO and C 3 H 7 radicals. The microcanonical statistical model is in better agreement with trajectory simulations for larger species and is thus applicable for practical systems that typically involve large molecules, for which direct dynamics calculations are impractical. The automated workflow is applied to the evaluation of the effects of prompt dissociation for two isomeric radicals C 4 H 7 1-3 (1-methylallyl) and C 4 H 7 1-4 (3-buten-1-yl). Twelve H-atom abstraction reactions are selected and the corresponding rate constants are computed with first principles theory. The microcanonical statistical model predicts that prompt dissociations of C 4 H 7 1-3 and C 4 H 7 1-4 are already significant at 1000K, resulting in differences of up to an order of magnitude at 2000K with respect to the phenomenological thermal rate constants. To illustrate the effects of prompt dissociation on simulations of experimental data, the calculated prompt rate constants are implemented in both CRECK and C3MechV3.3 kinetic mechanisms. Simulations of experimental flame data illustrate the noticeable impact of prompt dissociation kinetics on the high-temperature combustion reactivity of C 4 H 8 -1 and C 4 H 8 -2.
Ultrafast photoexcitation can induce a nonequilibrium dynamic with electron-lattice interaction, offering an effective way to study photoinduced phase transitions (PIPTs) in solids. The issue that atomic displacements after photoexcitation belong to a coherent change or disordered process has become controversial in the PIPT community. Using real-time, time-dependent density functional theory (rt-TDDFT) simulations, we were able to obtained both the coherent and the disordered PIPTs (dimer dissociation) in IrTe 2 with different electronic occupations. More importantly, we found that in the disordered phase transition there exists a local correlation between different dimers regarding their dissociation status. We define these Ir-Ir dimers directly connected by Te atoms, including intralayer and vertically across the layers, as a group (group I). Other Ir-Ir dimers separated by five Ir atoms from Ir-Ir dimers in group I are divided into another group (group II). The dimers in the same group will dissociate in a correlated fashion; they either all dissociate or all do not dissociate. On the other hand, the dimers in neighboring groups will have an anticorrelation: If the dimers in one group dissociate, the dimers in the neighboring group tend not to be dissociated, and vice versa.
In plasmonic catalysis, localized surface plasmon was leveraged to drive chemical reactions. This approach is promising for catalyzing many challenging reactions at relatively low temperatures and pressures. We apply density functional calculations to provide the insight for the mechanism of plasmon-induced direct CO 2 dissociation on an Al@Cu 2 O core-shell structure, which was observed in a previous experimental study. We show that the interaction of Cu 2 O with CO 2 results in the accessible antibonding states of the adsorbed CO 2 in the range of visible light. Though the intrinsic activation barrier for direct CO 2 dissociation is as high as 3.6 eV, we find that an effective reaction barrier of CO 2 dissociation under photon excitation could be reduced by 2 eV. We also show that the charge transfer is more pronounced in the final state of the dissociation due to the strong hybridization of the dissociated species with Cu 2 O. These results thus provide an explanation for the visible-light-induced direct CO 2 dissociation at relatively low temperature and under ambient pressure. This finding also shows the promising impact of plasmonic catalysis in mitigating carbon emission.
Photodissociation of the i-C 3 H 7 O radical is investigated using fast beam photofragment translational spectroscopy. Neutral i-C 3 H 7 O radicals are produced through the photodetachment of a fast beam of i-C 3 H 7 O - anions and are subsequently dissociated at 248 nm (5.0 eV). Furthermore, the dominant product channels are CH 3 + CH 3 CHO and OH + C 3 H 6 with some contribution from H + C 3 H 6 O. The CH 3 and H loss channels are attributed to dissociation on the ground electronic state of i-C 3 H 7 O, but in a nonstatistical manner because calculated RRKM dissociation rates exceed the rate of energy randomization. Translational energy and angular distributions for OH loss are consistent with ground state dissociation, but the branching ratio for this channel is considerably higher than predicted from RRKM rate calculations. Additionally, i-C 3 H 7 O undergoes three-body fragmentation to CH 3 + CH 3 + HCO and CH 3 + CH 4 + CO. These three-body channels are attributed to dissociation of i-C 3 H 7 O to CH 3 + CH 3 CHO, followed by secondary dissociation of CH 3 CHO on its ground electronic state.
During the current project period the following tasks were completed: (1) We demonstrated the feasibility of a new way of measuring CH3 radicals in a plasma environment using a single, femtosecond (fs) pulsed laser for the first time, in a CH4 + Ar flow. A single fs pulsed Ti:Sa laser was split into two beams and with beam conversion using crystals we generatedtwo beams of 275 nm and 205 nm. The 275 nm was used to predissociate the CH3 radicals to CH2+H, followed by 205 nm Two Photon Laser Induced Fluorescence (TALIF) detection of H atoms, with a 11 ns delay from 275 nm predissociation pulse. (2) We demonstrated preliminary CH3 concentration measurements with spatial (< 100 µm) and time resolution (< 10 ns) by image processing of H and Kr TALIF signal images. (3) The methodology to quantify CH3 concentrations was developed. (4) Preliminary measurements of laser dissociation cross sections for CH4 and CH3 to (CH3+H), and (CH2+H), respectively, were conducted. (5) 275 nm laser dissociation of CH4 is a multiphoton process, and the CH4 dissociation cross section is a more sensitive function of the laser pulse energy than CH4 concentration. In the coming months, we will make more precise measurements of the dissociation cross sections, 𝑘275, 𝐶𝐻4 and 𝑘275, 𝐶𝐻3, by varying the laser energy while keeping the flow composition and conditions constant. This will enable more precise quantification of CH3 radical concentrations. More detailed measurements of CH3 radicals will be conducted in the following months of 2025 (Sept-Dec) in a Titanium Isopropoxide (TIP) + H2 + Ar flow meant for pure phase Ti thin film deposition by Chemical Vapor Deposition (CVD). More precise measurements of 275 nm laser dissociation cross sections for CH4 (to CH3 + H) and CH3 (to CH2 + H) will be conducted in the future. Detailed 275 nm laser predissociation cross sections for CH4 and CH3 dissociation to (CH3+H), and (CH2+H), respectively, as a function of gas heating, plasma power, and laser pulse energy will be evaluated. This will enable quantification of CH3 concentrations in the precursor flow over a substrate with time and spatial resolution. Comparison of the concentrations with 2D numerical simulations can lead to understanding of plasma surface interactions during pure metallic Ti thin film deposition using environmentally safer non-halogen TIP precursor. Flow conditions for pure Ti thin film deposition using non-halogen precursor (TIP) will be identified in the following months.
The flow behind the shock wave formed around objects which fly at hypervelocity behaves differently from that of a perfect gas. Molecules become vibrationally excited, dissociated, and ionized. The hot gas may emit or absorb radiation. When the atoms produced by dissociation reach the wall surface, chemical reactions, including recombination, may occur. The thermochemical phenomena of vibration, dissociation, ionization, surface chemical reaction, and radiation are referred to commonly as high-temperature real-gas phenomena. The phenomena cause changes in the dynamic behavior of the flow and the surface pressure and heat transfer distribution around the object. The character of a real gas is described by the internal degrees of freedom and state of constituent molecules; nitrogen and oxygen for air. The internal energy states, rotation, vibration and electronic, of the molecules are excited and, in the limit, the molecular bonds are exceeded and the gas dissociated into atomic and, possibly, ionic constituents. The process of energy transfer causing excitation, dissociation and recombination is a rate process controlled by particle collisions. Binary, two-body, collisions are sufficient to cause internal excitation, dissociation and ionization while three-body collisions are required to recombine the particles into molecular constituents. If the rates of energy transfer are fast with respect to the local fluid dynamic time scale the gas is in, or nearly in, equilibrium. If the energy transfer rates are very slow the gas can be described as frozen. In all other instances, wherein any of the energy exchange rates are comparable to the local fluid time scale, the gas will be thermally or chemically reacting and out of equilibrium. Real gas thermochemical nonequilibrium processes are important in the determination of aerodynamic heating; both convective (including wall catalytic effects) and radiative heating. To illustrate this we consider the hypervelocity flow over a bluff body typical of an atmospheric entry vehicle or an aerospace transfer vehicle (ASTV). The qualitative aspects of a hypersonic flow field over a bluff body are discussed in two parts, forebody and afterbody, with attention to which particular physical effects must be included in an analysis. This will indicate what type of numerical modeling will be adequate in each region of the flow. A bluff forebody flow field is dominated by the presence of the strong bow shock wave and the consequent heating, and chemical reaction of the gas. At high altitude hypersonic flight conditions the thermal excitation and chemical reaction of the gas occur slowly enough that a significant portion of the flow field is in a state of thermochemical nonequilibrium. A second important effect is the presence of the thick boundary layer along the forebody surface. In this region there are large thermal and chemical species gradients due to the interaction of the gas with the wall. Also at high altitudes the shock wave and the boundary layer may become so thick that they merge; in this case the entire shock layer is dominated by viscous effects.
We investigate the possible pathways to produce the extreme energy observed in the calcium exosphere of Mercury. Any mechanism must explain the facts that Ca in Mercury's exosphere is extremely hot, that it is seen almost exclusively on the dawnside of the planet, and that its content varies seasonally, not sporadically. Simple diatomic molecules or their clusters are considered, focusing on calcium oxides while acknowledging that Ca sulfides may also be the precursor molecules. We first discuss impact vaporization to justify the assumption that CaO and Ca-oxide clusters are expected from impacts on Mercury. Then we discuss processes by which the atomic Ca is energized to a 70,000 K gas. The processes considered are (1) electron-impact dissociation of CaO molecules, (2) spontaneous dissociation of Ca-bearing molecules following impact vaporization, (3) shock-induced dissociative ionization, (4) photodissociation and (5) sputtering. We conclude that electron-impact dissociation cannot produce the required abundance of Ca, and sputtering cannot reproduce the observed spatial and temporal variation that is measured. Spontaneous dissociation is unlikely to result in the high energy that is seen. Of the two remaining processes, shock induced dissociative ionization produces the required energy and comes close to producing the required abundance, but rates are highly dependent on the incoming velocity distribution of the impactors. Photodissociation probably can produce the required abundance of Ca, but simulations show that photodissociation cannot reproduce the observed spatial distribution.
Here, we investigate the dynamics and site-selectivity in the dissociation of transient anions formed upon attachment of low energy electrons to acetic acid by anion fragment momentum imaging experiments. The resonances at 6.7 and 7.7 eV are confirmed to dissociate exclusively by the O–H bond, while a third resonance at 9.1 eV dissociates primarily by both C–H break and O–H break. A fourth resonance near 10 eV is found to dissociate by O–H break. For each resonance, the measured kinetic energy release indicates two-body dissociation produces a neutral radical in the ground electronic state, for all four resonances. The measured angular distributions are consistent with all four resonances having A' symmetry.
An existing set of vibrationally resolved ionization cross section for the ground state and the first excited states of the hydrogen molecule, based on the Gryzinski method, is extended by cross sections for the isotopomeres of H{sub 2} (i.e. D{sub 2}, T{sub 2}, HD, HT, and DT), both for non-dissociative and dissociative ionizations. The comparison of cross sections for non-dissociative ionization of H{sub 2} with results obtained by the Molecular Convergent Close-Coupling method gives a very good agreement. The compiled tables give non-dissociative and dissociative cross sections for the ground state and the five energetically lowest electronically excited states of H{sub 2} and its isotopomeres, in each case for the first 9 vibrational levels. Data for all vibrational levels of the excited states is available online.
In typical carbonyl-containing molecules, bond dissociation events follow initial excitation to $nπ_{C=O}$$^*$ states. However, in acetyl iodide, the iodine atom gives rise to electronic states with mixed $nπ_{C=O}$$^*$ and $nπ_{C–I}$$^*$ character, leading to complex excited-state dynamics, ultimately resulting in dissociation. Using ultrafast extreme ultraviolet (XUV) transient absorption spectroscopy and quantum chemical calculations, we present an investigation of the primary photodissociation dynamics of acetyl iodide via time-resolved spectroscopy of core-to-valence transitions of the I atom after 266 nm excitation. The probed I 4d-to-valence transitions show features that evolve on sub-100-fs time scales, reporting on excited-state wavepacket evolution during dissociation. These features subsequently evolve to yield spectral signatures corresponding to free iodine atoms in their spin–orbit ground and excited states with a branching ratio of 1.1:1 following dissociation of the C–I bond. Calculations of the valence excitation spectrum via equation-of-motion coupled cluster with single and double substitutions (EOM-CCSD) show that initial excited states are of spin-mixed character. From the initially pumped spin-mixed state, we use a combination of time-dependent density functional theory (TDDFT)-driven nonadiabatic ab initio molecular dynamics and EOM-CCSD calculations of the N$_{4,5}$ edge to reveal a sharp inflection point in the transient XUV signal that corresponds to rapid C–I homolysis. Here, by examining the molecular orbitals involved in the core-level excitations at and around this inflection point, we are able to piece together a detailed picture of C–I bond photolysis in which d → σ* transitions give way to d → p excitations as the bond dissociates. We also report theoretical predictions of short-lived, weak 4d → 5d transitions in acetyl iodide, validated by weak bleaching in the experimental transient XUV spectra. This joint experimental–theoretical effort has thus unraveled the detailed electronic structure and dynamics of a strongly spin–orbit coupled system.
Density functional theory simulations (DFT) have been used in combination with the climbing image nudged elastic band method (CI-NEB) to determine the energy barriers required to dissociate H 2 at four types of h-BN defects and evaluate the potential for reacted H species to hop to adjacent available sites. The defects were selected based on previous work in which ab initio thermodynamics was used to identify specific defects with optimal thermodynamics for reversible H 2 storage, that is, the defects would dissociate molecular H 2 while not binding H species too strongly so that hydrogen release is favorable. The four defects investigated are the N and B monovacancies, which only offer either B or N defective sites respectively, as well as larger cluster vacancy defects named 3V(1B2N) and hexagonal 6V(3B3N), which present a mixture of B and N defect sites available for H binding. While homogeneous H 2 dissociation by B and N monovacancies have energy barriers larger than 0.4 eV, we found that mixed BN terminated defects have energy barrier lower than 0.4 eV for H 2 dissociation. In particular, H 2 dissociation by the hexagonal 6V(3B3N) defect, exclusively made of Frustrated Lewis Pairs (FLPs), is almost barrierless. The energy barrier for subsequent H hopping to available adjacent B or N sites of the defect were also calculated. It was found that the hopping of H species generally involves high energy barriers ranging from 0.26 eV to 2.57 eV. In conclusion, this work completes previous thermodynamic theoretical investigations and provides a more comprehensive picture of H 2 reaction with defective h-BN for potential H 2 storage and recovery.