Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DIAGNOSIS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Improving Multiple Fault Diagnosability using Possible Conflicts

Multiple fault diagnosis is a difficult problem for dynamic systems. Due to fault masking, compensation, and relative time of fault occurrence, multiple faults can manifest in many different ways as observable fault signature sequences. This decreases diagnosability of multiple faults, and therefore leads to a loss in effectiveness of the fault isolation step. We develop a qualitative, event-based, multiple fault isolation framework, and derive several notions of multiple fault diagnosability. We show that using Possible Conflicts, a model decomposition technique that decouples faults from residuals, we can significantly improve the diagnosability of multiple faults compared to an approach using a single global model. We demonstrate these concepts and provide results using a multi-tank system as a case study.

multiple faults↗
NASA NTRS2016

Satellite Maps and Relevant Compositional Properties of PM2.5 in Difficult Winter Situations and Comparisons to DISCOVER-AQ Airborne Sampling

Mediterranean-climate regions like California's San Joaquin Valley are subject to severe wintertime particulate pollution affecting public health. We present maps of episodes and particulate diagnostics to aid diagnosis and amelioration. For abatement at sources, we require an understanding of sources and transport. Remote sensing should be of aid, but radiance-to-particle relationships are far different from methods which have been of use in the Eastern USA, Northern and Central Europe. Here are the problems: (a) Thin if very polluted mixed layers (MLs) yield optical depths, AOD, near the detection level, (b) bright and quite variegated surfaces (c) Unusual particle composition (e.g., predominance of NH4NO3 and fireplace buning aerosol), which complicate the relationship of AOD to PM2.5. Specialized analysis of MODIS-Aqua data to obtain AOD using the multi-angle (MAIAC) technique employed by Lyapustin and Wang. Meteorological analyses like NOAA's Rapid Analysis Product (RAP, or newer products like HRRR), which are formulated to remain close to observations (e.g. of water), provide useful ML information corroborated by DISCOVER-AQ in-situ and lidar observations. The many PM2.5 measurements allow a calibration of these products and thus maps of aerosol on many successive aerosol buildups. These calibrations also allow insight into compositional information relevant to MODIS retrievals, the product of aerosol density and specific scattering. We have found that the rich in-situ, lidar, and sun-photometer data sets of NASA'S DISCOVER-AQ data set (2013) of great aid. We will highlight the most interesting of many intercomparisons possible with this rich data set. We conclude with a description of new work to extend these insights to similar regions, e.g. the Imperial Valley of California, the Po Valley and maritime Southern Europe, and the litoral regions of Israel.

aerosols↗
NASA NTRS2016

Exploration Clinical Decision Support System: Medical Data Architecture

The Exploration Clinical Decision Support (ECDS) System project is intended to enhance the Exploration Medical Capability (ExMC) Element for extended duration, deep-space mission planning in HRP. A major development guideline is the Risk of "Adverse Health Outcomes & Decrements in Performance due to Limitations of In-flight Medical Conditions". ECDS attempts to mitigate that Risk by providing crew-specific health information, actionable insight, crew guidance and advice based on computational algorithmic analysis. The availability of inflight health diagnostic computational methods has been identified as an essential capability for human exploration missions. Inflight electronic health data sources are often heterogeneous, and thus may be isolated or not examined as an aggregate whole. The ECDS System objective provides both a data architecture that collects and manages disparate health data, and an active knowledge system that analyzes health evidence to deliver case-specific advice. A single, cohesive space-ready decision support capability that considers all exploration clinical measurements is not commercially available at present. Hence, this Task is a newly coordinated development effort by which ECDS and its supporting data infrastructure will demonstrate the feasibility of intelligent data mining and predictive modeling as a biomedical diagnostic support mechanism on manned exploration missions. The initial step towards ground and flight demonstrations has been the research and development of both image and clinical text-based computer-aided patient diagnosis. Human anatomical images displaying abnormal/pathological features have been annotated using controlled terminology templates, marked-up, and then stored in compliance with the AIM standard. These images have been filtered and disease characterized based on machine learning of semantic and quantitative feature vectors. The next phase will evaluate disease treatment response via quantitative linear dimension biomarkers that enable image content-based retrieval and criteria assessment. In addition, a data mining engine (DME) is applied to cross-sectional adult surveys for predicting occurrence of renal calculi, ranked by statistical significance of demographics and specific food ingestion. In addition to this precursor space flight algorithm training, the DME will utilize a feature-engineering capability for unstructured clinical text classification health discovery. The ECDS backbone is a proposed multi-tier modular architecture providing data messaging protocols, storage, management and real-time patient data access. Technology demonstrations and success metrics will be finalized in FY16.

Biomedical support↗
DOE OSTI2024

Metasurface‐Based Mueller Matrix Microscope

In conventional optical microscopes, image contrast of objects mainly results from the differences in light intensity and/or color. Muller matrix optical microscopes (MMMs), on the other hand, can provide significantly enhanced image contrast and rich information about objects by analyzing their interactions with polarized light. However, state-of-the-art MMMs are fundamentally limited by bulky and slow polarization state generators and analyzers. Here, the study demonstrates a metasurface-based MMM, i.e., Meta-MMM, which is equipped with a chip-integrated, single-shot metasurface polarization state analyzer (Meta-PSA). The Meta-MMM is featured with high-speed measurement (≈2s per Muller matrix (MM) image), superior operation stability, dual-color operation, and high measurement accuracy (measurement error 1–2%) for MM imaging. The Meta-MMM is applied to nanostructure characterization, surface morphology analysis, and discovering birefringent structures in honeybee wings. As a result, the Meta-MMMs hold the promise to revolutionize various applications from biological imaging, medical diagnosis, and material characterization to industry inspection and space exploration.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Root Cause Analysis of Degradation in Protonic Ceramic Electrochemical Cell with Interfacial Electrical Sensors Using Data‐Driven Machine Learning

Abstract Protonic ceramic electrochemical cells (PCECs) offer promising paths for energy storage and conversion. Despite considerable achievements made, PCECs still face challenges such as physiochemical compatibility between componenets and suboptimal solid–solid contact at the interfaces between the electrolytes and electrodes. In this study, a novel approach is proposed that combines in situ electrochemical characterization of interfacial electrical sensor embedded PCECs and machine learning to quantify the contributions of different cell components to total degradation, as well as to predict the remaining useful life. The experimental results suggest that the overpotential induced by the oxygen electrode is 48% less than that of oxygen electrode/electrolyte interfacial contact for up to 1171 h. The data‐driven machine learning simulation predicts the RUL of up to 2132 h. The root cause of degradation is overpotential increase induced by oxygen electrode, which accounts for 82.9% of total cell degradation. The success of the failure diagnostic model is demonstrated by its consistency with degradation modes that do not manifest in electrolysis fade during early real operations. This synergistic approach provides valuable insights into practical failure diagnosis of PCECs and has the potential to revolutionize their development by enabling improved performance prediction and material selection for enhanced durability and efficiency.

25 ENERGY STORAGE↗
DOE OSTI2022

Beryllium disease among construction trade workers at Department of Energy nuclear sites: A follow‐up

Abstract Background Construction workers at U.S. Department of Energy (DOE) nuclear weapons facilities are screened to identify DOE‐related occupational illnesses, including beryllium sensitization (BeS) and chronic beryllium disease (CBD). The study objectives were to estimate beryllium disease risks and the CBD claims acceptance rate in the energy workers' benefits program. Methods Workers diagnosed with BeS via beryllium lymphocyte proliferation test (BeLPT) included in screening examinations were interviewed about subsequent diagnosis of CBD. We estimated the proportion who developed CBD based on the ratio of CBD cases, based on self‐reported compensation claim status, to all workers with BeS interviewed. We used stratified analyses to explore trends in disease frequency by age, race, sex, DOE employment duration, site, trade group, and cigarette smoking history. Results Between 1998 and 2020, 21,854 workers received a BeLPT; 262 (1.20%) had BeS (two abnormals or one abnormal plus one borderline test); 212 (0.97%) had a single abnormal BeLPT. Of 177 BeS workers interviewed, 35 (19.8%) reported an accepted CBD compensation claim. The claims acceptance rate among BeS workers increased with years of DOE employment, from 8.4% with <5 years to 33.3% for >25 or more years. Five of 68 interviewed workers with a single positive BeLPT reported CBD claim acceptance; an additional CBD case was confirmed by chart review (8.8%). Conclusions Years of DOE work predict the risk of developing CBD among those sensitized and getting a claim for CBD accepted. Ongoing surveillance and increased awareness of the risk of beryllium exposure and CBD as an occupational disease among construction workers are needed.

Cloeren, Marianne↗
DOE OSTI2023

Engineered Glucose Oxidase‐Carbon Nanotube Conjugates for Tissue‐Translatable Glucose Nanosensors

Abstract Continuous and non‐invasive glucose monitoring and imaging is important for disease diagnosis, treatment, and management. However, glucose monitoring remains a technical challenge owing to the dearth of tissue‐transparent glucose sensors. In this study, we present the development of near‐infrared fluorescent single‐walled carbon nanotube (SWCNT) based nanosensors directly functionalized with glucose oxidase (GOx) capable of immediate and reversible glucose imaging in biological fluids and tissues. We prepared GOx‐SWCNT nanosensors by facile sonication of SWCNT with GOx in a manner that—surprisingly—does not compromise the ability of GOx to detect glucose. Importantly, we find by using denatured GOx that the fluorescence modulation of GOx‐SWCNT is not associated with the catalytic oxidation of glucose but rather triggered by glucose‐GOx binding. Leveraging the unique response mechanism of GOx‐SWCNT nanosensors, we developed catalytically inactive apo‐GOx‐SWCNT that enables both sensitive and reversible glucose imaging, exhibiting a ΔF/F 0 of up to 40 % within 1 s of exposure to glucose without consuming the glucose analyte. We finally demonstrate the potential applicability of apo‐GOx‐SWCNT in biomedical applications by glucose quantification in human plasma and glucose imaging in mouse brain slices.

Chemistry↗
DOE OSTI2024

Designer Fluorescent Redoxmer Self‐Reports Side Reactions in Nonaqueous Redox Flow Batteries

The state of health (SOH) is a critical measure for evaluating and predicting performance of redox flow batteries (RFBs). However, diagnosing SOH of RFBs is often challenging due to the overwhelming complexity of the electrolytes and associated electrochemical reactions. Designing active molecules or redoxmers that can autonomously exhibit property changes upon specific stimuli may provide a viable way for early diagnosis of SOH. Herein, a dimerized redoxmer, DGL-N-CH 3 , was designed and synthesized by linking blue-green fluorescent monomers through a diglycolamide linker. While DGL-N-CH 3 still maintains similar electrochemical behavior and strong fluorescence, we observe a unique side reaction when cycling DGL-N-CH 3 in H-cells, which leads to a side product, NHCH 3 -BzNSN via linker cleavage. Interestingly, NHCH 3 -BzNSN also emits fluorescence but at a longer wavelength. By taking advantage of this unique fluorescent change that corresponds to the growth of NHCH 3 -BzNSN, we successfully established the capacity decay of DGL-N-CH 3 H-cell cycling, exemplifying a proof-of-concept self-reporting redoxmer design towards in situ SOH monitoring.

25 ENERGY STORAGE↗
DOE OSTI2020

A nomogram for prediction of stage III/IV gastric cancer outcome after surgery: A multicenter population‐based study

Abstract Most patients with gastric cancer (GC) are first diagnosed at stage III‐IV and surgery resection remains the primary therapeutic modality for these patients. However, clinical staging used for prediction of those patients provides limited information. We collected clinicopathological data and disease‐progression information from 508 patients with stage III‐IV GC at three Chinese hospitals and 1298 patients from the Surveillance, Epidemiology, and End Results database. Based on the stepwise multivariate regression model, we constructed a novel nomogram to predict overall survival (OS). The performance of discrimination for this model was measured using Harrell's concordance index (C‐index) and receiver‐operating characteristic curve (ROC), and was validated using calibration plots. Multivariate Cox regression analyses showed that tumor size, age at diagnosis, N stage, tumor grade, and distant metastases were outstanding independent prognostic factors of stage III‐IV GC. We developed a nomogram based on these five prognostic predictors. In the training set, the C‐index of the nomogram was 0.645 (95% CI: 0.611‐0.679), which was higher than that of the American Joint Committee on Cancer TNM system alone (sixth TNM: 0.544; seventh TNM: 0.575; eighth TNM: 0.568). Similar results were observed in validation cohort. Moreover, calibration blots demonstrated good consistency between the actual and predicted OS probabilities. According to the nomogram, GC individuals could be classified into three groups (low‐, middle‐, and high‐risk) ( P < .001). Our nomogram complements the current staging system for prediction of individual prognosis with stage III‐IV GC, and may be helpful for making individualized treatment decisions.

Gao, Zhiying↗
DOE OSTI2021

Impact of including second and later cancers in cause-specific survival estimates using population-based registry data

Background. Second or later primary cancers account for approximately 20% of incident cases in the United States. Currently, cause-specific survival (CSS) analyses exclude these cancers because the cause of death (COD) classification algorithm was available only for first cancers. The authors added rules for later cancers to the Surveillance, Epidemiology, and End Results cause-specific death classification algorithm and evaluated CSS to include individuals with prior tumors. Methods. The authors constructed 2 cohorts: 1) the first ever primary cohort, including patients whose first cancer was diagnosed during 2000 through 2016) and 2) the earliest matching primary cohort, including patients with any cancer who matched the selection criteria irrespective of whether it was the first or a later cancer diagnosed during 2000 through 2016. The cohorts' CSS estimates were compared using follow-up through December 31, 2017. The new rules were used in the second cohort for patients whose first cancers during 2000 through 2016 were their second or later cancers. Results. Overall, there were no statistically significant differences in CSS estimates between the 2 cohorts. Estimates were similar by age, stage, race, and time since diagnosis, except for patients with leukemia and those aged 65 to 74 years (3.4 percentage point absolute difference). Conclusions. The absolute difference in CSS estimates for the first cancer ever cohort versus earliest of any cancers cohort in the study period was small for most cancer types. As the number of newly diagnosed patients with prior cancers increases, the algorithm will make CSS more inclusive and enable estimating survival for a group of patients with cancer for whom life tables are not available or life tables are available but do not capture other-cause mortality appropriately.

Survival Analysis↗
DOE OSTI2022

Risk and incidence of head and neck cancers in veterans living with HIV and matched HIV‐negative veterans

Background Persons living with HIV/AIDS have a higher incidence of virus‐related and tobacco/alcohol‐related cancers. This study is the first to estimate the effect of HIV versus HIV‐negative veterans on the risk of head and neck squamous cell carcinoma incidence in a large retrospective cohort study. Methods The authors constructed a retrospective cohort study using patient data from 1999 to 2016 from the National Veterans Administration Corporate Data Warehouse and the VA Central Cancer Registry. This cohort study included 45,052 veterans living with HIV/AIDS and 162,486 HIV‐negative patients matched by age, sex, and index visit (i.e., HIV diagnosis date or clinic visit date). The age‐standardized incidence rates and estimated adjusted hazard ratios were calculated with a Cox proportional hazards regression for oropharyngeal and nonoropharyngeal head and neck cancer squamous cell carcinoma (HNSCC). The authors also abstracted human papillomavirus (HPV) status from oropharyngeal HNSCC diagnosed after 2010. Results Veterans living with HIV/AIDS (VLWH) have 1.71 (95% confidence interval [CI], 1.36, 2.14) times the risk of oropharyngeal cancer and 2.06 (95% CI, 1.76, 2.42) times the hazard of nonoropharyngeal cancer compared with HIV‐negative veterans. VLWH with oropharyngeal squamous cell carcinoma (OPSCC) were more likely to be HPV‐positive ( N = 30 [81.1%]) than the HIV‐negative veterans with OPSCC ( N = 50 [67.6%]), although this difference was not significant ( p = .135). For nonoropharyngeal cancer, the increased risk of oral cavity cancer among VLWH drove the increased risk. Conclusions The study results suggest that HIV may play a role in virally mediated and nonvirally mediated HNSCC. As the HIV prevalence rises in the United States due to better survival and the incidence of HPV‐positive oropharyngeal HNSCC increases, the interaction between HPV and HIV becomes increasingly relevant.

Mazul, Angela L.↗
DOE OSTI2024

NCAPH drives breast cancer progression and identifies a gene signature that predicts luminal a tumour recurrence

Luminal A tumours generally have a favourable prognosis but possess the highest 10-year recurrence risk among breast cancers. Additionally, a quarter of the recurrence cases occur within 5 years post-diagnosis. Identifying such patients is crucial as long-term relapsers could benefit from extended hormone therapy, while early relapsers might require more aggressive treatment. We conducted a study to explore non-structural chromosome maintenance condensin I complex subunit H’s (NCAPH) role in luminal A breast cancer pathogenesis, both in vitro and in vivo, aiming to identify an intratumoural gene expression signature, with a focus on elevated NCAPH levels, as a potential marker for unfavourable progression. Our analysis included transgenic mouse models overexpressing NCAPH and a genetically diverse mouse cohort generated by backcrossing. A least absolute shrinkage and selection operator (LASSO) multivariate regression analysis was performed on transcripts associated with elevated intratumoural NCAPH levels. We found that NCAPH contributes to adverse luminal A breast cancer progression. The intratumoural gene expression signature associated with elevated NCAPH levels emerged as a potential risk identifier. Transgenic mice overexpressing NCAPH developed breast tumours with extended latency, and in Mouse Mammary Tumor Virus (MMTV)-NCAPH ErbB2 double-transgenic mice, luminal tumours showed increased aggressiveness. High intratumoural Ncaph levels correlated with worse breast cancer outcome and subpar chemotherapy response. A 10-gene risk score, termed Gene Signature for Luminal A 10 (GSLA10), was derived from the LASSO analysis, correlating with adverse luminal A breast cancer progression. The GSLA10 signature outperformed the Oncotype DX signature in discerning tumours with unfavourable outcomes, previously categorised as luminal A by Prediction Analysis of Microarray 50 (PAM50) across three independent human cohorts. This new signature holds promise for identifying luminal A tumour patients with adverse prognosis, aiding in the development of personalised treatment strategies to significantly improve patient outcomes.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Clustering Nuclear Magnetic Resonance: Machine learning assistive rapid two‐dimensional relaxometry mapping

Abstract Low‐field nuclear magnetic resonance (NMR) relaxometry is an attractive approach from point‐of‐care testing medical diagnosis to in situ oil‐gas exploration. One of the problems, however, is the inherently long relaxation time of the (liquid) samples, (and hence low signal‐to‐noise ratio) which causes unnecessarily long repetition time. In this work, a new class of methodology is presented for rapid and accurate object classification using NMR relaxometry with the aid of machine learning. It is demonstrated that the sensitivity and specificity of the classification is substantially improved with higher order of (pseudo)‐dimensionality (e.g., 2D‐ or multi‐dimensional). This new methodology (termed as ‘Clustering NMR’) may be extremely useful for rapid and accurate object classification (in less than a minute) using low‐field NMR.

Peng, Weng Kung↗
DOE OSTI2022

Dimorphic Mechanisms of Fragility in Diabetes Mellitus: the Role of Reduced Collagen Fibril Deformation

ABSTRACT Diabetes mellitus (DM) is an emerging metabolic disease, and the management of diabetic bone disease poses a serious challenge worldwide. Understanding the underlying mechanisms leading to high fracture risk in DM is hence of particular interest and urgently needed to allow for diagnosis and treatment optimization. In a case–control postmortem study, the whole 12th thoracic vertebra and cortical bone from the mid-diaphysis of the femur from male individuals with type 1 diabetes mellitus (T1DM) (n = 6; 61.3 ± 14.6 years), type 2 diabetes mellitus (T2DM) (n = 11; 74.3 ± 7.9 years), and nondiabetic controls (n = 18; 69.3 ± 11.5) were analyzed with clinical and ex situ imaging techniques to explore various bone quality indices. Cortical collagen fibril deformation was measured in a synchrotron setup to assess changes at the nanoscale during tensile testing until failure. In addition, matrix composition was analyzed including determination of cross-linking and non-crosslinking advanced glycation end-products like pentosidine and carboxymethyl-lysine. In T1DM, lower fibril deformation was accompanied by lower mineralization and more mature crystalline apatite. In T2DM, lower fibril deformation concurred with a lower elastic modulus and tendency to higher accumulation of non-crosslinking advanced glycation end-products. The observed lower collagen fibril deformation in diabetic bone may be linked to altered patterns mineral characteristics in T1DM and higher advanced glycation end-product accumulation in T2DM. © 2022 The Authors. Journal of Bone and Mineral Research published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research (ASBMR).

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Room‐Temperature Mid‐Infrared Detection Using Metasurface‐Absorber‐Integrated Phononic Crystal Oscillator

Mid-infrared (MIR) detectors find extensive applications in chemical sensing, spectroscopy, communications, biomedical diagnosis, and space exploration. Alternative to semiconductor MIR photodiodes and bolometers, mechanical-resonator-based MIR detectors show advantages in higher sensitivity and lower noise at room temperature, especially toward longer wavelength infrared. Here, uncooled room-temperature MIR detectors based on lithium niobate surface acoustic wave phononic crystal (PnC) resonators integrated with wavelength-and-polarization-selective metasurface absorber arrays are demonstrated. The detection is based on the resonant frequency shift induced by the local temperature change due to MIR absorptions. The PnC resonator is configured in an oscillating mode, enabling active readout and low-frequency noise. The 1-GHz oscillator-based MIR detector shows a relative frequency deviation of 5.24 × 10 −10 Hz −1/2 at an integration time of 50 µs, leading to an incident noise equivalent power of 197 pW Hz −1/2 when input 6-µm MIR light is modulated at 1.8 kHz, and a large dynamic range of 10 7 in incident MIR power. The device architecture is compatible with the scalable manufacturing process and can be readily extended to a broader spectral range by tailoring the absorbing wavelengths of metasurface absorbers.

Xi, Zichen [Virginia Polytechnic Inst. and State U↗
DOE OSTI2020

Projected increase of the East Asian summer monsoon ( Meiyu ) in Taiwan by climate models with variable performance

Abstract The active phase of the East Asian summer monsoon (EASM) in Taiwan during May and June, known as Meiyu , produces substantial precipitation for water uses in all sectors of society. Following a companion study that analysed the historical increase in the Meiyu precipitation, the present study conducted model evaluation and diagnosis based on the EASM lifecycle over Taiwan. Higher and lower skill groups were identified from 17 Couple Model Intercomparison Project Phase 5 (CMIP5) models, with five models in each group. Despite the difference in model performance, both groups projected a substantial increase in the Meiyu precipitation over Taiwan. In the higher skill group, weak circulation changes and reduced low‐level convergence point to a synoptically unfavourable condition for precipitation. In the lower skill group, intensified low‐level southwesterly winds associated with a deepened upper level trough enhance moisture pooling. Thus, the projected increase in Meiyu precipitation will likely occur through the combined effects of (1) the extension of a strengthened North Pacific anticyclone enhancing southwesterlies; and (2) more systematically, the Clausius–Clapeyron relationship that increases precipitation intensity in a warmer climate. The overall increase in the Meiyu precipitation projected by climate models of variable performance supports the observed tendency toward more intense rainfall in Taiwan and puts its early June 2017 extreme precipitation events into perspective.

Tung, Yu‐Shiang↗
DOE OSTI2023

Fault isolation and fault-tolerant control for nonlinear stochastic distribution control systems with multiplicative faults

Here, in this paper, a fault isolation, diagnosis and fault tolerant control algorithm is proposed for nonlinear multiple multiplicative faults stochastic distribution control systems employing Takagi–Sugeno fuzzy system. To obtain the detailed fault information, a fault detection algorithm is introduced to discover the fault occurrence time. Then a fault isolation observer is built to produce the residual, and the error system is separated to subsystems affected only by disturbance and multiplicative faults. Moreover, a fault estimation scheme is presented to obtain the fault magnitude information. When faults occur, the system output probability density function will deviate from the desired distribution. So the model predictive control fault tolerant control scheme is needed to minimize the impact of faults as much as possible to make sure that the post fault output probability density function track the desired probability density function. The validity of the designed algorithm is demonstrated through a simulation example, where the fault tolerant control algorithm ensures that the system output probability density function still track the given output probability density function despite the complex case of multiple multiplicative faults occurring simultaneously.

42 ENGINEERING↗