Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DFT Calculations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Buffer concentration dramatically affects the stability of S-nitrosothiols in aqueous solutions

S-nitrosothiols (RSNOs) are an important group of nitric oxide (NO)-donating compounds with low toxicity and wide biomedical applications. In this paper, we, for the first time, demonstrate that the concentration of buffer remarkably affects the stability of RSNOs including naturally occurring S-nitrosoglutathione (GSNO) and synthetic S-nitroso-N-acetylpenicillamine (SNAP). For a solution with a high concentration of GSNO (e.g., 50 mM) and an initial near-neutral pH, the optimal buffer concentration is close to the GSNO concentration under our experimental conditions. A lower buffer concentration does not have adequate buffer capacity to resist the pH drop caused by GSNO decomposition. The decreased solution pH further accelerates GSNO decomposition because GSNO is most stable at near-neutral pH according to our density functional theory (DFT) calculations. A higher-than-optimal buffer concentration also reduces the GSNO stability because buffer ingredients including phosphate, Tris base, and HEPES consume NO/N 2 O 3 . In contrast to GSNO, the highest SNAP stability is obtained when the starting solution at a neutral pH does not contain buffer species, and the stability decreases as the buffer concentration increases. Furthermore, this is because SNAP is more stable at mildly acidic pH and the SNAP decomposition-induced pH drop stabilizes the donor. When the RSNO concentration is low (e.g., 1 mM), the buffer concentration also matters because any excess buffer accelerates the donor decomposition. Since the effect of buffer concentration was previously overlooked and suboptimal buffer concentrations were often used, this paper will aid in the formulation of RSNO solutions to obtain the maximum stability for prolonged storage and sustained NO release.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Spin crossover transition driven by pressure: Barocaloric applications

This article describes a mean-field theoretical model for Spin-Crossover (SCO) materials and explores its implications. It is based on a simple Hamiltonian that yields the high spin molar fraction as a function of temperature and pressure, as well as a temperature–pressure phase diagram for the SCO transition. In order to test the model, it was compared with the giant Barocaloric Effect (BCE) of the SCO material [FeL 2 ][B 4 ] 2 . Furthermore, we found that optical phonons are responsible for 92% of the total barocaloric entropy change. DFT calculations successively indicates that, as expected, the majority of this effect can be traced to low frequencies modes of vibration (400 cm -1 ), associated to the Fe coordination.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Anti-electrostatic hydrogen-bonded tellurate dimers captured and stabilized by crystallization of a bis-iminoguanidinium salt

Anionic Te 2 O 6 (OH) 4 4– dimers have been captured by crystallization of a hydrated salt of glyoxal-bis-iminoguanidinium (GBIG), and structurally characterized by single-crystal X-ray diffraction and vibrational spectroscopy. The crystal structure reveals anti-electrostatic hydrogen-bonded chains of Te 2 O 6 (OH) 4 4– dimers, consisting of edge-sharing TeO 6 octahedra, stabilized by hydrogen bonding from the GBIG cations and the water molecules included in the crystal. FTIR spectroscopy confirms the presence of TeO 6 octahedra with characteristic Te–O stretching modes at 755 cm -1 and 689 cm -1 , while the observed stretching mode at 3459 cm-1 confirms the presence of axially-bonded hydroxyl groups. Raman spectroscopy and DFT calculations confirm the presence of the Te 2 O 6 (OH) 4 4– dimers in the crystalline phase and of the TeO(OH) 5 – monomers in solution.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Gas-phase ion-molecule interactions in a collision reaction cell with triple quadrupole-inductively coupled plasma mass spectrometry: Investigations with N 2 O as the reaction gas

Nitrous oxide (N 2 O) was used as a reaction gas to investigate the gas phase ion-molecule interactions using the Agilent 8900 QQQ-ICP-MS. A multi-element standard containing 45 elements with masses ranging from 9 to 208 u was measured in the presence and absence of N 2 O. The main product ion species observed were oxides and nitrides. Comparison of the N 2 O reaction results with similar measurements conducted with O 2 revealed that N 2 O was more effective at forming oxides in general: the elements Cd and Pb were shown to produce oxides with N 2 O where the reaction did not occur with O 2 . Nitrous oxide was also shown to produce a significant amount of nitride species in a few cases. The general reactivity was shown to be consistent with density functional theory (DFT)-predicted reaction enthalpies, such that all predicted exothermic reactions produced product ions at levels at least 1% of the unreacted ion. Our results show that reaction enthalpy is a reasonable predictor of reactivity with N2O on the timescales of the interactions in non-thermal ICP-MS/MS systems. Our work demonstrates the utility of two relatively new platforms (commercial elemental ICP-MS/MS and EMSL Arrows interface to the NWChem program suite), which allows for the study of a large number of elements within a short period. While DFT with the basis sets utilized here is not the most accurate computational method, it is also not computationally expensive and is shown to be suitable for predicting gas phase reactivity in the QQQ-ICP-MS for the majority of ions studied. Here, the ease and rapidity of data collection and DFT calculations has the potential to be very impactful for the identification of targeted reaction chemistries to be leveraged for analytical method development, such as for the inline separation of isobaric interferences from analytes of interest.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ultrafast and selective gas transport through highly ordered black phosphorene nanochannels

Two-dimensional (2D) materials bring a great opportunity to fabricate molecular sieving membranes that can potentially break the permeability-selectivity trade-off. Although 2D laminar membranes with interlayer nanochannels as molecular sieving channel were widely studied, for most of reported 2D laminar membranes, it is of a great challenge to fabricate highly ordered interlayer nanochannels for mass transport. Herein, we report a novel kind of black phosphorene membrane which is made from the stacking of highly ordered 2D black phosphorene nanoflakes. The as prepared black phosphorene membrane shows H 2 permeance > 1000 GPU and H 2 /CO 2 selectivity > 100 for H 2 /CO 2 mixed gas, demonstrating an extremely high gas separation performance. The DFT calculation results demonstrate that the interlayer galleries in the black phosphorene membrane allow the H 2 passing through easily while block the other gases with bigger kinetic diameters, matching well with the experimental findings. In conclusion, the present results indicate that the interlayer galleries in the black phosphorene membrane can be applied as molecular sieving channels for gas separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Bioleaching ion-unexchangeable rare earth in ion-adsorption type rare earth waste tailing

Ion-adsorption type rare earth ores (IREO) in China serve as the primary source of medium and heavy rare earth globally. With the rapidly growing demand for rare earth elements (REEs) and the dwindling supply of premium IREO, enhancing the recovery of REEs, especially the ion-unexchangeable REEs with ultra-low content and ambiguous speciation from IREO or its tailing, has become a critical trend and challenge. Here, this study identified the occurrences of ion-unexchangeable REEs, primarily detected in Fe-enriched minerals, xenotime, and monazite of IREO using TESCAN integrated mineral analyzer (TIMA) and laser ablation inductively coupled plasma mass spectrometer (LA-ICP-MS) analysis. To extract these elusive REEs, a bioleaching technique utilizing Aspergillus niger (A. niger) metabolites was proposed, achieving a leaching yield of 31.4 wt%. Complementary sequential chemical extraction methods (SCEM), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculations further elucidate the underlying mechanism, involving the carboxylic acid produced by the metabolic process of microbes that dissolves goethite by disrupting Fe—O bonds and liberating REEs, which complexed with carboxylate (R—COO—), to promote further dissolution. This work offers insight into enhancing the recovery of ion-unexchangeable REEs from IREO or its tailing, paving the way for sustainable and efficient rare earth mining practices.

42 ENGINEERING↗
DOE OSTI2025

Recovering high-purity uranyl nitrate from simulated used nuclear fuel dissolver solutions by crystallization: rejecting technetium

The separation of U from Tc and other problematic fission product elements like Mo and Ru, along with Sr, Zr, Cs, and Nd, has been achieved via the crystallization of uranyl nitrate hexahydrate (UNH). Rejection of technetium as pertechnetate anion ( 99 TcO 4 – ) is an especially important feature of this system, as it otherwise tends to follow U (VI) in extractive separations. It also raises the salient question regarding why this oxoanion cannot replace nitrate within the crystalline lattice of UNH. Results showed high-yield (>90 %), high-purity (>99 %) recovery of U as UNH from solutions containing 99 TcO 4 – by simple reduction of temperature from 60°C to 20°C. There was no observable interaction of 99 TcO 4 – with UO 2 2+ . The addition of other cations like, Sr 2+ , Zr 4+ , Cs + , and Nd 3+ , also did not form secondary, contaminant solid phases, leaving the > 99 % of the fission product elements in the mother liquor, while the U was recovered at > 90 %. Similarly, Mo and Ru, when added to the mixture, were shown to behave as the other fission-product elements, remaining in the mother liquor during crystallization. As a result, DFT calculations showed that, despite the higher binding strength of TcO 4 – , HMoO 4 – , and BiO 3 – with the UO 2 2+ cation compared to NO 3 – , the hydrogen-bonding network of the two coordinated ions and four waters of hydration in the UNH crystal structure is the driving force for the high specificity of this separation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

An activatable NIR fluorescent rosol for selectively imaging nitroreductase activity

Hypoxia (i.e., pO 2 ≤ ~1.5 %) is an important characteristic of tumor microenvironments that directly correlates with resistance against first-line therapies and tumor proliferation/infiltration. The ability to accurately identify hypoxic tumor cells/tissue could afford tailored therapeutic regimens for personalized treatment, the development of more-effective therapies, and discerning the mechanisms underlying disease progression. Fluorogenic constructs currently developed for identifying such tumor cells/tissue operate by targeting the bioreductive activity of primarily the nitroreductase (NTR) class of enzymes, but collectively such constructs unfortunately present photophysical and/or physicochemical shortcomings that could limit their effectiveness upon implementation. To overcome these limitations, we present the rational design, development, and evaluation of the first activatable ultracompact xanthene core-based molecular probe (NO 2 -Rosol) for selectively imaging NTR activity that affords an “OFF-ON” near-infrared (NIR) fluorescence response (ca. > 700 nm) alongside a remarkable Stokes shift (ca. > 150 nm) via NTR activity-facilitated modulation to its energetics whereby the resultant interplay discontinues an intramolecular d-PET fluorescence-quenching mechanism transpiring between directly-linked electronically-uncoupled π-systems comprising its components. DFT calculations guided selection of a suitable fluorogenic scaffold and nitroaromatic moiety candidate that when adjoined could (i) afford such photophysical response upon bioreduction by upregulated NTR activity in hypoxic tumor cells/tissue and (ii) employ a retention mechanism strategy that capitalizes on an inherent physical property of the NIR fluorogenic scaffold for achieving signal amplification. NO 2 -Rosol demonstrated 705 nm NIR fluorescence emission and a 157 nm Stokes shift, selectivity for NTR over relevant bioanalytes, and a 28- and 12-fold fluorescence enhancement in solution and between cells cultured under different oxic conditions, respectively. Finally, in establishing feasibility for NO 2 -Rosol to provide favorable contrast levels in in solutioand in vitrostudies, we anticipate NO 2 -Rosol similarly doing so in future studies towards its translation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Computational design of passivants for CdTe grain boundaries

CdTe is the second most-widely deployed photovoltaic (PV) material due to its high efficiency and low manufacturing costs. Currently, polycrystalline CdTe (poly-CdTe) has a record efficiency of similar to 22%, which is still well below the theoretical limit (similar to 30%). Polycrystalline CdTe films that have incorporated Cl or Se show higher efficiency, possibly due to the segregation of these ions to the grain boundaries (GBs), where they may passivate the dangling bonds. However, the efficiency enhancement mechanisms of passivants in CdTe GBs, and the feasibility of employing alternative passivants, have not been well explored. Here, we present a systematic computational study of CdTe GBs with potential passivants, namely S, P, As, Se, and Sb on Te sites, and Na, Mg, Al, Sc, Cu, and Zn on Cd sites. Density functional theory (DFT) calculations were performed on GB dislocation core structures derived from scanning transmission electron microscopy (STEM) images of a model GB (bicrystal). We computed the segregation thermodynamics, electronic density of states, and charge variations near doped CdTe GBs. We find that segregation of impurities to GBs is thermodynamically favorable. For a Te-terminated core, Se, S, and P on Te sites effectively reduce midgap states. For both Cd-and Te-terminated dislocation cores, Sc and Al reduce midgap states when substituted for Cd atoms. Overall, the greatest improvement was achieved with co-doping, i.e. simultaneously substituting Te with Se and substituting Cd with Cu or Al. The elimination of midgap states is predicted to increase the photovoltaic efficiency of CdTe by reducing the recombination at grain boundaries.

14 SOLAR ENERGY↗
DOE OSTI2024

First-principles study of the structures and redox mechanisms of Ni-rich lithium nickel manganese cobalt oxides

To reduce the cobalt (Co) content in lithium-ion batteries, Ni-rich (high-Ni) lithium nickel manganese cobalt oxides (NMC) are pursued as one of the next-generation cathode materials. However, there is still debate on the crystal and electronic structures of the baseline, LiNiO 2 . Density Functional Theory (DFT) calculations were performed to provide a theoretical understanding of Ni-rich NMC. First, it was found that the commonly used $R\bar{3}m$ structure for LiNiO 2 is metallic, contrary to the experimentally reported mix-conducting behavior. Among the four different space groups, $R\bar{3}m$, C2/m, P2 1 /c, and P2/c, P2/c with charge disproportionation of Ni 2+ and Ni 4+ is the most energetically stable and semiconducting structure of LiNiO 2 . Therefore, the atomic structures of representative Ni-rich NMC were built by partially replacing Ni with Co or Mn in the P2/c LiNiO 2 to form Li x Ni y Mn z Co 1-y-z O 2 . In the fully lithiated (x=1.0) high Ni content NMC (y>0.5), the oxidation state of all Mn ions becomes 4+, while Co ions still maintain 3+, and part of the Ni ions become 3+ to compensate for the charge. Upon delithiation, the local environment shows more variation of the charge states on the transition metal (TM) ions. The average oxidation on each TM follows a sequence of losing electrons that starts from Ni 2+ to Ni 3+ , then oxidizing Ni 3+ and Co 3+ , while Mn 4+ remains electrochemically inactive till x=0. Finally, a general relationship for the oxidation state change in each TM as a function of x is derived and shows agreement with both modeling and experimental data.

25 ENERGY STORAGE↗
DOE OSTI2024

Investigation of coverage dependence of the stretching frequency of CO adsorbed on Pd surfaces at low coverage limits

The stretching frequency of the C—O bond is a sensitive probe of the local environment of a surface-bound CO molecule, including the adorption site and density, i.e. surface coverage. In this work, we extend our analysis beyond the frequency shift due to differences in adsorption configurations. Using density functional theory (DFT) calculations, we directly explore the correlations between surface coverage and the stretching frequency of adsorbed CO on Pd surfaces. Here we also perform constant pressure infrared reflection absorption measurements of CO on Pd(111) and use existing relations between pressure and coverage to derive coverage dependency. Both results are compared to previously reported experimental data. Our derived correlations of peak frequency and area with surface coverage can help interpret experimental IR spectra in real time and extract time-dependent concentration data from transient kinetic experiments.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Insights into the interaction of nitrobenzene and the Ag(111) surface: A DFT study

Here, this study explores the potential of nitrobenzene as an anolyte material for nonaqueous redox flow batteries (RFBs) by theoretically examining its low-coverage adsorption behavior on neutral and charged Ag(111) model electrode surfaces. At the low coverage limit, DFT calculations show a preference for nitrobenzene to adsorb parallel to the surface, with the benzene ring and nitro group centered over HCP sites. Interactions between nitrobenzene and the surface were analyzed using induced charge density analysis, Bader charge analysis, and projected density of states (PDOS). It was found that nitrobenzene adsorbs primarily through van der Waals interactions with the surface. As nitrobenzene accumulates negative charge, the strength of adsorption diminishes. Understanding the electrode-electrolyte interface is crucial for enhancing RFB electrochemical performance, and this study sheds light on nitrobenzene's interaction with a model Ag electrode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Adsorbate-induced adatom formation on Au-Cu bimetallic alloys and its possible consequences for CO 2 electroreduction

The adsorbate-induced formation of sub-nanometer clusters on transition-metal single crystals observed in previous high-pressure microscopic studies hinted at the in-situ formation of unique active sites even on large nanoparticle catalysts. We propose that the adatom formation energy can be used as an energetic descriptor for the initial step toward the adsorbate-induced metal-cluster formation process. This descriptor can be efficiently computed using density functional theory (DFT) calculations and applied for screening and identification of metal catalysts where this phenomenon may play an important role in generating active sites in-situ. As a proof of concept, here, we construct an adatom formation energy database for three Au x Cu y alloys (x:y = 3:1, 1:1, or 1:3) and eighteen adsorbates (H, C, N, O, F, S, Cl, Br, I, CH x , NH x (x = 1 – 3), CO, NO, and OH) commonly involved in catalytic reactions. The energetics of adatom formation were examined in all cases where the (111) terrace, (211) step-edge, and (874) kink were the sources of the adatom. We demonstrate that the presence of an adsorbate could alter not only the energetics for adatom formation but also the elemental nature of the preferred adatom being formed. Using our database, we identified promising systems which favor adsorbate-induced adatom formation under near-ambient conditions. Specifically, CO-induced adatom formation on all three Au-Cu alloy surfaces could occur under CO 2 electroreduction (CO 2 RR) conditions. This phenomenon offers a qualitative explanation for the experimentally observed CO 2 RR activity on Au-Cu alloy catalysts. As a result, our methodology offers an easily expandable and efficient approach for large-scale catalyst screening with regards to adatom/cluster formation under reaction conditions and provides insight into the possible nature of active sites on alloy catalysts from a novel perspective.

Active site↗
DOE OSTI2024

Selective single-atom adsorption for precision separation of lead ions in tap water via capacitive deionization

Capacitive deionization (CDI) offers a cost-effective and low-energy method for selective removal of Pb 2+ from drinking water. Modifying CDI electrode surfaces with functional groups presents a versatile approach to enhancing selective ion adsorption capacity. However, a comprehensive understanding of the selectivity and removal efficiency of Pb 2+ among diverse functional groups remains unexplored. Here, we investigated the effects of different functional groups (-SH, -COOH, and -NH 2 ) attached to the graphene oxide (GO) electrode surfaces on Pb 2+ selectivity and removal efficiency. Surprisingly, GO-COOH demonstrated single-atom adsorption of Pb 2+ , displaying superior removal efficiency and selectivity compared with -SH and -NH 2 , although -SH possesses significant chelation capability for Pb 2+ . Both density functional theory (DFT) calculations and X-ray pair distribution function (PDF) analyses confirmed that Pb 2+ exhibits a theoretically higher affinity to -COOH. Further, this research deepens our understanding of the interactions between functional groups and heavy metal ions, enabling selective and rapid separation of target cations for water purification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Engineering bimetallic interfaces and revealing the mechanism for carbon dioxide electroreduction to C 3+ liquid chemicals

Reduction reaction of CO 2 (CO 2 RR) to liquid C 3+ chemicals is a net-zero-carbon process and can increase local resiliency to power outages and fuel consumption. The mechanism and the catalyst design rules of CO 2 RR-to-C 3+ are unknown. Engineering bimetallic interface (e.g., Pd/Au) to tune the intermediate adsorption is promising for promoting C 3+ formation. Our density functional theory (DFT) calculations find that *CH 2 could be the key intermediate and C 1 -CH 2 coupling could be the rate-limiting step to generate C 3+ . High CO surface coverages can promote the bimetallic interfacial sites, lower the energetics of the C 1 -CH 2 coupling step, and enhance the C 3+ formation. We further construct a volcano plot of C 1 -CH 2 kinetics as a function of the binding strength of key intermediate *CH 2 via engineering the d-band center of the interfacial site. Our findings could guide the rational design of bimetallic interfaces and their near-surface microenvironment for enhancing CO 2 RR-to-C 3+ .

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

The Story of 5d Metallocorroles: From Metal–Ligand Misfits to New Building Blocks for Cancer Phototherapeutics

Porphyrin chemistry is Shakespearean: over a century of study has not withered the field’s apparently infinite variety. Heme proteins continually astonish us with novel molecular mechanisms, while new porphyrin analogues bowl us over with unprecedented optical, electronic, and metal-binding properties. Within the latter domain, corroles occupy a special place, exhibiting a unique and rich coordination chemistry. The 5d metallocorroles are arguably the icing on that cake. New Zealand chemist Penny Brothers has used the word “misfit” to describe the interactions of boron, a small atom with a predilection for tetrahedral coordination, and porphyrins, classic square-planar ligands. Steve Jobs lionized misfits as those who see things differently and push humanity forward. Both perspectives have inspired us. The 5d metallocorroles are misfits in that they encapsulate a large 5d transition metal ion within the tight cavity of a contracted porphyrin ligand. Given the steric mismatch inherent in their structures, the syntheses of some 5d metallocorroles are understandably capricious, proceeding under highly specific conditions and affording poor yields. Three broad approaches may be distinguished. (a) In the metal–alkyl approach, a free-base corrole is exposed to an alkyllithium and the resulting lithio-corrole is treated with an early transition metal chloride; a variant of the method eschews alkyllithium and deploys a transition metal–alkyl instead, resulting in elimination of the alkyl group as an alkane and insertion of the metal into the corrole. This approach is useful for inserting transition metals from groups 4, 5, and, to some extent, 6, as well as lanthanides and actinides. (b) In our laboratory, we have often deployed a low-valent organometallic approach for the middle transition elements (groups 6, 7, 8, and 9). The reagents are low-valent metal–carbonyl or −olefin complexes, which lose one or more carbon ligands at high temperature, affording coordinatively unsaturated, sticky metal fragments that are trapped by the corrole nitrogens. (c) Finally, a metal acetate approach provides the method of choice for gold and platinum insertion (groups 10 and 11). This Account provides a first-hand perspective of the three approaches, focusing on the last two, which were largely developed in our laboratory. In general, the products were characterized with X-ray crystallography, electrochemistry, and a variety of spectroscopic methods. The physicochemical data, supplemented by relativistic DFT calculations, have provided fascinating insights into periodic trends and relativistic effects. An unexpected feature of many 5d metallocorroles, given their misfit character, is their remarkable stability under thermal, chemical, and photochemical stimulation. Many of them also exhibit long triplet lifetimes on the order of 100 μs and effectively sensitize singlet oxygen formation. Many exhibit phosphorescence in the near-infrared under ambient conditions. Furthermore, water-soluble ReO and Au corroles exhibit impressive photocytotoxicity against multiple cancer cell lines, promising potential applications as cancer phototherapeutics. We thus envision a bright future for the compounds as rugged building blocks for new generations of therapeutic and diagnostic (theranostic) agents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Molecular Examination of Ion-Pair Competition in Alkaline Aluminate Solutions Using In Situ Liquid SIMS

Understanding the structure and composition of aluminate complexes in extremely alkaline systems such as Bayer liquors has received enormous attentions due to its fundamental and industrial importance. However, obtaining direct molecular information of the underlying ion-ion interactions using traditional approaches such as NMR or Raman spectroscopy is challenging due to the weakness of these interactions and/or their complex overlapping spectral signatures. Here, we exploit in situ liquid secondary ion mass spectrometry (SIMS) as a new approach and show how it enables new insights. In contrast with traditional techniques, using SIMS we succeeded in acquiring information on dominant ion clusters in these alkaline systems. In Na + /K + mixed alkaline aluminate solutions we clearly observe preferential formation of Na + -anion clusters over K + -anion clusters. Further, evaluation of these clusters by density functional theory (DFT) calculations shows that these structures are stable and that their relative bond energies are consistent with their observed SIMS signal intensity differences. This demonstrates a key advantage of in situ liquid SIMS for overcoming ambiguities obscuring important information in these systems on constituent molecular clusters defined by relatively weak ion pair competition and ion-solvent interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Single-Atom Pt Boosting Electrochemical Nonenzymatic Glucose Sensing on Ni(OH) 2 /N-Doped Graphene

Conventional nanomaterials in electrochemical non-enzymatic sensing face huge challenge due to their complex size-, surface- and composition- dependent catalytic properties and low active site density. In this work, we designed a single-atom Pt supported on Ni(OH) 2 nanoplates/nitrogen-doped graphene (Pt 1 /Ni(OH) 2 /NG) as the first example for constructing a single-atom catalyst based electrochemical non-enzymatic glucose sensor. The resulting Pt 1 /Ni(OH) 2 /NG exhibited a low anode peak potential of 0.48 V and high sensitivity of 220.75 μA mM -1 cm -2 towards glucose, which are 45 mV lower and 12 times higher than those of Ni(OH) 2 , respectively. The catalyst also showed excellent selectivity for several important interferences, short response time of 4.6 s, and high stability over 4 weeks. Experimental and density functional theory (DFT) calculated results reveal that the improved performance of Pt 1 /Ni(OH) 2 /NG could be attributed to stronger binding strength of glucose on single-atom Pt active centers and their surrounding Ni atoms, combined with fast electron transfer ability by the adding of the highly conductive NG. Finally, this research sheds light on the applications of SACs in the field of electrochemical non-enzymatic sensing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗