Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COPPER OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Efficient room temperature spin-Hall injection across an oxide barrier

Spin Hall injection is demonstrated at room temperature using Pt metal and AlO{sub x} barriers. A substantial spin accumulation, comparable to that of a magnetic spin injection, is transferred into a mesoscopic Cu wire from an adjacent Pt wire across an AlO{sub x} barrier. The Pt spin Hall angle is 0.030 ± 0.007 when assuming a Pt spin diffusion length λ{sub pt} > 6 nm and 0.09 ± 0.02 when assuming λ{sub pt} = 2 nm. Nearly (66 ± 6)% of the spin accumulation on the Pt surface is transferred into the Cu across the AlO{sub x}, enabling an efficient spin Hall injection scheme.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microwave dielectric properties of CaCu{sub 3}Ti{sub 4}O{sub 12}-Al{sub 2}O{sub 3} composite

(1-x)CaCu{sub 3}Ti{sub 4}O{sub 12} + (x)Al{sub 2}O{sub 3} composite (0 ≤ x ≤0.25) was prepared via conventional solid-state reaction method. The fabrication of sample was started with synthesizing stoichiometric CCTO from CaCO{sub 3}, CuO and TiO{sub 2} powders, then wet-mixed in deionized water for 24 h. The process was continued with calcined CCTO powder at 900 °C for 12 h before sintered at 1040 °C for 10 h. Next, the calcined CCTO powder with different amount of Al{sub 2}O{sub 3} were mixed for 24 h, then palletized and sintered at 1040 °C for 10. X-ray diffraction analysis on the sintered samples showed that CCTO powder was in a single phase, meanwhile the trace of secondary peaks which belong to CaAl{sub 2}O{sub 4} and Corundum (Al{sub 2}O{sub 3}) could be observed in the other samples Scanning electron microscopy analysis showed that the grain size of the sample is firstly increased with addition of Al{sub 2}O{sub 3} (x = 0.01), then become smaller with the x > 0.01. Microwave dielectric properties showed that the addition of Al{sub 2}O{sub 3} (x = 0.01) was remarkably reduced the dielectric loss while slightly increased the dielectric permittivity. However, further addition of Al{sub 2}O{sub 3} was reduced both dielectric loss and permittivity at least for an order of magnitude.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Rechargeable Alkaline Zinc/Copper Oxide Batteries

Resurrecting a battery chemistry thought to be only primary, we demonstrate the first example of a rechargeable alkaline zinc/copper oxide battery. With the incorporation of a Bi 2 O 3 additive to stabilize the copper oxide-based conversion cathode, Zn/(CuO–Bi 2 O 3 ) cells are capable of cycling over 100 times at >124 W h/L, with capacities from 674 mA h/g (cycle 1) to 362 mA h/g (cycle 150). The crucial role of Bi 2 O 3 in facilitating the electrochemical reversibility of Cu 2 O, Cu(OH) 2 , and Cu o was supported by scanning and transmission electrochemical microscopy, cyclic voltammetry, and rotating ring-disc electrode voltammetry and monitored via operando energy-dispersive X-ray diffraction measurements. Bismuth was identified as serving two roles, decreasing the cell resistance and promoting Cu(I) and Cu(II) reduction. Additionally, to mitigate the capacity losses of long-term cycling CuO cells, we demonstrate two limited depth of discharge (DOD) strategies. First, a 30% DOD (202 mA h/g) retains 99.9% capacity over 250 cycles. Second, the modification of the CuO cathode by the inclusion of additional Cu metal enables performance at very high areal capacities of ~40 mA h/cm 2 and unprecedented energy densities of ~260 W h/L, with near 100% Coulombic efficiency. This work revitalizes a historically primary battery chemistry and opens opportunity to future works in developing copper-based conversion cathode chemistries for the realization of low-cost, safe, and energy-dense secondary batteries.

25 ENERGY STORAGE↗

Modification of Carbon Nitride/Reduced Graphene Oxide van der Waals Heterostructure with Copper Nanoparticles To Improve CO 2 Sensitivity

Carbon nitride/reduced graphene oxide (rGO) van der Waals heterostructures (vdWH) have previously shown exceptional oxygen sensitivity via a photoredox mechanism, making it a potential material candidate for various applications such as oxygen reduction reaction catalysis and oxygen sensing. In this work, the electronic structure of a carbon nitride/rGO composite is modified through the introduction of copper nanoparticles (NPs). When incorporated into a chemiresistor device, this vdWH displayed a newfound CO 2 sensitivity. The effects of humidity and light were investigated and found to be crucial components for the CO 2 sensitivity. Density functional theory calculations performed on a carbon nitride/copper NP@rGO model system found an enhanced stabilization of CO 2 caused by H-bonds between the carbon nitride layer and chemisorbed CO 2 on copper, pointing to the important role played by humidity. The synergetic effect between the carbon nitride layer interfaced with CuNP@rGO, in combination with humidity and light (395 nm) irradiation, is found to be responsible for the newfound sensitivity toward CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selective recovery of pure copper nanopowder from indium-tin-oxide etching wastewater by various wet chemical reduction process: Understanding their chemistry and comparisons of sustainable valorization processes

Sustainable valorization processes for selective recovery of pure copper nanopowder from Indium-Tin-Oxide (ITO) etching wastewater by various wet chemical reduction processes, their chemistry has been investigated and compared. After the indium recovery by solvent extraction from ITO etching wastewater, the same is also an environmental challenge, needs to be treated before disposal. After the indium recovery, ITO etching wastewater contains 6.11 kg/m{sup 3} of copper and 1.35 kg/m{sup 3} of aluminum, pH of the solution is very low converging to 0 and contain a significant amount of chlorine in the media. In this study, pure copper nanopowder was recovered using various reducing reagents by wet chemical reduction and characterized. Different reducing agents like a metallic, an inorganic acid and an organic acid were used to understand reduction behavior of copper in the presence of aluminum in a strong chloride medium of the ITO etching wastewater. The effect of a polymer surfactant Polyvinylpyrrolidone (PVP), which was included to prevent aggregation, to provide dispersion stability and control the size of copper nanopowder was investigated and compared. The developed copper nanopowder recovery techniques are techno-economical feasible processes for commercial production of copper nanopowder in the range of 100–500 nm size from the reported facilities through a one-pot synthesis. By all the process reported pure copper nanopowder can be recovered with>99% efficiency. After the copper recovery, copper concentration in the wastewater reduced to acceptable limit recommended by WHO for wastewater disposal. The process is not only beneficial for recycling of copper, but also helps to address environment challenged posed by ITO etching wastewater. From a complex wastewater, synthesis of pure copper nanopowder using various wet chemical reduction route and their comparison is the novelty of this recovery process. - Highlights: • From the Indium-Tin-Oxide etching wastewater, copper nanopowder was synthesized. • Solution chemistry of ITO etching wastewater is addressed. • A techno-economical feasible, environment friendly and occupational safe process. • Brings back the material to production stream and address the circular economy. • A cradle to cradle technology management lowers the futuristic carbon economy.

54 ENVIRONMENTAL SCIENCES↗

Some metal-graphite and metal-ceramic composites for use as high energy brake lining materials

Materials were studied as candidates for development as potential new aircraft brake lining materials. These families were (1) copper-graphite composites; (2) nickel-graphite composites; (3) copper - rare-earth-oxide (gadolinium oxide (Gd2O3) or lanthanum oxide (La2O3)) composites and copper - rare-earth-oxide (La2O3) - rare-earth-fluoride (lanthanum fluoride (LaF3)) composites; (4) nickel - rare-earth-oxide composites and nickel - rare-earth-oxide - rare-earth-fluoride composites. For comparison purposes, a currently used metal-ceramic composite was also studied. Results showed that the nickel-Gd2O3 and nickel-La2O3-LaF3 composites were comparable or superior in friction and wear performance to the currently used composite and therefore deserve to be considered for further development.

Bill, R. C.↗

EXAMINATION OF THE OXIDATION PROTECTION OF ZINC COATINGS FORMED ON COPPER ALLOYS AND STEEL SUBSTRATES

The exposure of metallic components at aggressive high temperature environments, usually limit their usage at similar application because they suffer from severe oxidation attack. Copper alloys are used in a wide range of high-quality indoor and outdoor applications, statue parts, art hardware, high strength and high thermal conductivity applications. On the other hand, steel is commonly used as mechanical part of industrial set outs or in the construction sector due to its high mechanical properties. The aim of the present work is the examination of the oxidation resistance of pack cementation zinc coatings deposited on copper, leaded brass and steel substrates at elevated temperature conditions. Furthermore, an effort made to make a long-term evaluation of the coated samples durability. The oxidation results showed that bare substrates appear to have undergone severe damage comparing with the coated ones. Furthermore, the mass gain of the uncoated samples was higher than this of the zinc covered ones. Particularly zinc coated brass was found to be more resistant to oxidation conditions in which it was exposed as it has the lower mass gain as compared to the bare substrates and zinc coated copper. Zinc coated steel was also proved to be more resistive than the uncoated steel.

36 MATERIALS SCIENCE↗

Tuning transport in graphene oxide membrane with single-site copper ($\mathrm{II}$) cations

Controlling the ion transport through graphene oxide (GO) membrane is challenging, particularly in the aqueous environment due to its strong swelling tendency. Fine-tuning the interlayer spacing and chemistry is critical to create highly selective membranes. We investigate the effect of single-site divalent cations in tuning GO membrane properties. Competitive ionic permeation test indicates that Cu 2+ cations dominate the transport through the 2D channels of GO membrane over other cations (Mg 2+ /Ca 2+ /Co 2+ ). Without/With the single-site M 2+ modifications, pristine GO, Mg-GO, Ca-GO, and Cu-GO membranes show interlayer spacings of ~13.6, 15.6, 14.5, and 12.3 Å in wet state, respectively. The Cu-GO membrane shows a two-fold decrease of NaCl (1 M) permeation rate comparing to pristine GO, Mg-GO, and Ca-GO membranes. In reverse osmosis tests using 1000 ppm NaCl and Na 2 SO 4 as feeds, Cu-GO membrane shows rejection of ~78% and ~94%, respectively, which are 5%–10% higher than its counterpart membranes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Interfacial Resistance on AC Loss as a Function of Applied AC Field in YBCO Filamentary Conductors

To reduce ac loss in Y-Ba-Cu-O (YBCO) coated conductors while maintaining current sharing between filaments, an attempt was made to introduce an interfacial resistance between the YBCO filaments and a continuous silver cap layer. The YBCO filaments were produced via laser scribing of MOCVD YBCO films deposited on standard Ion Beam Assisted Deposition (IBAD) templates. After laser scribing, the filaments were exposed to air at room temperature to degrade the YBCO surface. A three micron thick silver cap layer was then and each sample was oxygen annealed at different temperature to produce different interface resistance at the interface between the silver and YBCO. Measurements of the ac loss was measured as a function of applied perpendicular field and frequency revealed a correlation between the reduction in coupling loss and the oxygen annealing temperature.

36 MATERIALS SCIENCE↗

Synthesis, Structural Characterization, and Electronic Structure of Single-Crystalline CuxV2O5 Nanowires

Single-crystalline copper vanadium oxide nanowires ??-CuxV2O5 (x 0.60) have been synthesized by the hydrothermal reduction of bulk CuV2O6 using small-molecule aliphatic alcohols as reducing agents. The prepared copper vanadium bronze nanowires are metallic in nature and exhibit aspect ratios as high as 300. The recent discovery of superconductivity and charge disproportionation in bulk ??-CuxV2O5 has led to renewed interest in these one-dimensional metallic systems. Scaling these systems to nanoscale dimensions offers the potential for further tunability of electronic transport and Li-ion intercalation kinetics. A combination of spectroscopic and electrical measurement methods has been used to provide evidence for the metallic nature and the presence of room-temperature charge disproportionation in these nanowires.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Relationship of antioxidant and oxidative stress markers in different organs following copper toxicity in a rat model

Copper (Cu) at a higher level becomes toxic and it can catalyze the formation of highly reactive hydroxyl radical. We report the vulnerability of liver, kidney and brain to different dose of copper sulfate (CuSO{sub 4}) induced oxidative stress at different time duration. Fifty-four male Wistar rats (weight range = 205 ± 10 g) were equally divided into three groups. CuSO{sub 4} was administered orally to the experimental groups (Group-II and III) up to 90 days in a dose of 100 and 200 mg/Kg body weight per day. Saline water was given to the control group (Group-I). At the end of 30, 60 and 90 days of administration, neurobehavioral studies were done and six rats from each group were sacrificed. Their liver, kidney and brain tissues were subjected for Cu, glutathione (GSH), malondialdehyde (MDA) and total antioxidant capacity (TAC) assay. Blood urea nitrogen (BUN), serum creatinine, bilirubin and transaminases were measured. GSH, TAC and MDA levels were correlated with the markers of respective organ dysfunction. Administration of CuSO{sub 4} resulted in increased free Cu and MDA level, and decrease GSH and TAC levels in group-II and III compared with group-I. In experimental groups, the reduction in TAC and GSH levels was maximum in liver tissue followed by brain and kidney; whereas increase in MDA level was highest in liver followed by brain and kidney at 30, 60 and 90 days. TAC and GSH levels in the liver inversely correlated with serum transaminases and bilirubin, and tissue free Cu, and positively correlated with MDA levels. Free Cu level in kidney tissue and BUN inversely correlated with TAC and GSH, and positively with MDA level. Grip-strength, rotarod and Y-maze findings were inversely correlated with brain free Cu and MDA levels and positively with GSH and TAC levels. The oxidative stress was highest in liver followed by brain and kidney after oral CuSO{sub 4} exposure in a rat model. These levels correlated with the respective organ dysfunction and tissue free Cu concentration. - Highlights: • Oral dosing of CuSO{sub 4} leads to oxidative stress in liver, brain and kidney. • Liver has maximum oxidative stress followed by brain and kidney. • Oxidative stress correlated with the respective organ dysfunction and tissue Cu concentration.

60 APPLIED LIFE SCIENCES↗

Effect of gold composition on the orientations of oxide nuclei during the early stage oxidation of Cu-Au alloys

In situ environmental transmission electron microscopy is employed to study the effect of Au composition in Cu-Au alloys on the orientations of oxide islands during the initial-stage oxidation of Cu-Au(100) alloys. An orientation transition from nucleating epitaxial Cu{sub 2}O islands to randomly oriented oxide islands is observed upon increasing the oxygen gas pressure. By increasing the Au composition in the Cu-Au alloys, both the oxide nucleation time and saturation density of oxide islands increase, but the critical oxygen pressure leading to nucleating randomly oriented Cu{sub 2}O islands decreases. It is shown by a kinetic model that such a dependence of the critical oxygen pressure on the alloy composition is related to its effect on two competing processes, the oxide-alloy structure match and the effective collision of oxygen atoms, in determining the overall nucleation rate of oxide islands during the oxidation.

36 MATERIALS SCIENCE↗

Experimental Liquidus Studies of the Pb-Cu-Si-O System in Equilibrium with Metallic Pb-Cu Alloys

Phase equilibria of the Pb-Cu-Si-O system have been investigated in the temperature range from 1073 K to 1673 K (800 °C to 1400 °C) for oxide liquid (slag) in equilibrium with solid Cu metal and/or liquid Pb-Cu alloy, and solid oxide phases: (a) quartz or tridymite (SiO{sub 2}) and (b) cuprite (Cu{sub 2}O). High-temperature equilibration on silica or copper substrates was performed, followed by quenching, and direct measurement of Pb, Cu, and Si concentrations in the liquid and solid phases using the electron probe X-ray microanalysis has been employed to accurately characterize the system in equilibrium with Cu or Pb-Cu metal. All results are projected onto the PbO-“CuO{sub 0.5}”-SiO{sub 2} plane for presentation purposes. The present study is the first-ever systematic investigation of this system to describe the slag liquidus temperatures in the silica and cuprite primary phase fields.

36 MATERIALS SCIENCE↗

The behavior of inverse oxide/metal catalysts: CO oxidation and water-gas shift reactions over ZnO/Cu(111) surfaces

There is a general desire to improve the configuration of industrial catalysts by taking advantage of the intrinsic properties of metal oxides. On an inverse oxide/metal catalyst, the reactants can interact with defect sites of the oxide nanoparticles, metal sites, and the metal-oxide interface. We have investigated the oxidation of carbon monoxide (CO + 0.5O 2 → CO 2 ) and the water-gas shift (WGS, CO + H 2 O → H 2 + CO 2 ) reaction on a series of ZnO/Cu(111) surfaces prepared in different ways. Oxidation of a Zn-Cu(111) alloys with O 2 at 460 K produces ZnO/CuO x /Cu(111) systems where the size of the ZnO islands is in the range of 5–20 nm. These systems are highly active for the oxidation of CO at moderate temperatures (400–500 K) but have problems of stability when performing the water-gas shift at temperatures above 550 K. ZnO/CuO x /Cu(111) surfaces prepared by vapor deposition of Zn at 600 K in O 2 exhibit islands of ZnO which are extremely large (400–500 nm) and contain a minimum of 3–4 layers of the oxide. These large islands of ZnO are not as chemically active as the small ZnO clusters yet they have high stability and produce ZnO-Cu interfaces which are efficient as catalysts for the water-gas shift reaction at 550–625 K.

36 MATERIALS SCIENCE↗

Improved Thermal Stability of a Copper-containing Ceria-based Catalyst for Low Temperature CO Oxidation under Simulated Diesel Exhaust Conditions

Cerium-zirconium mixed oxides (CZ) containing Cu (CZCu) have very high CO oxidation performance at low temperatures under simulated diesel exhaust conditions; however, CZCu is prone to significant deactivation upon hydrothermal aging. In this work, we discovered that Cu supported on a commercial CZ (GMR6) is thermally stable, and after aging Cu/GMR6 shows comparable activity for CO oxidation to the fresh CZCu. GMR6 is more thermally stable than homemade CZ, and Cu/GMR6 shows a smaller decrease of BET surface area than Cu/CZ upon hydrothermal aging. The decrease of the BET surface area of the catalyst is accelerated by the presence of Cu. The presence of La and Pr in the GMR6 support provides high structural stability and enhanced oxygen mobility. The formation of both surface and bulk carbonates during CO oxidation results in activity decrease of Cu/GMR6. Thermal decomposition of these carbonates fully regenerates Cu/GMR6. The presence of low level of SO2 in the feed gas mixture poisons the CO oxidation activity of Cu/GMR6 forming highly stable sulfates on the CZ support.

CO oxidation, cerium zirconium copper oxide, therm↗

Giant dielectric response and low dielectric loss in Al{sub 2}O{sub 3} grafted CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics

This study sheds light on the effect of alumina on dielectric constant and dielectric loss of novel CaCu{sub 3}Ti{sub 4}O{sub 12} composite ceramics. Alumina, at several concentrations, was deposited on the surface of CaCu{sub 3}Ti{sub 4}O{sub 12} particles via sol-gel technique. The dielectric constant significantly increased for all frequencies and the dielectric loss substantially decreased for low and intermediate frequencies. These observations were attributed to the change in characteristics of grains and grain boundaries. It was found that the insulating properties of the grain boundaries are improved following the addition of Al{sub 2}O{sub 3}. The relative density of CaCu{sub 3}Ti{sub 4}O{sub 12}/Al{sub 2}O{sub 3} composite ceramics decreased compared to the pure CaCu{sub 3}Ti{sub 4}O{sub 12} and the grain size was greatly changed with the alumina content affecting the dielectric properties. With the addition of alumina into CaCu{sub 3}Ti{sub 4}O{sub 12}, tighter interfaces formed. The 6%- and 10%-alumina ceramics showed the minimum dielectric loss and the maximum dielectric constant, respectively. Both the dielectric constant and loss tangent decreased in the 20%-alumina ceramic due to the formation of CuO secondary phase. It was revealed that Al serves as an electron acceptor decreasing the electron concentration, if Al{sup 3+} ions substitute for Ti{sup 4+} ions, and as an electron donor increasing the electron concentration, if Al{sup 3+} ions substitute for Ca{sup 2+} ions. We established a processing-microstructure-properties paradigm which opens new avenues for novel applications of CaCu{sub 3}Ti{sub 4}O{sub 12}/Al{sub 2}O{sub 3} composite ceramics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reaction mechanism of CO oxidation on Cu{sub 2}O(111): A density functional study

The possible reaction mechanisms for CO oxidation on the perfect Cu{sub 2}O(111) surface have been investigated by performing periodic density functional theoretical calculations. We find that Cu{sub 2}O(111) is able to facilitate the CO oxidation with different mechanisms. Four possible mechanisms are explored (denoted as M{sub ER1}, M{sub ER2}, M{sub LH1}, and M{sub LH2}, respectively): M{sub ER1} is CO{sub (gas)}+O{sub 2(ads)}{yields}CO{sub 2(gas)}; M{sub ER2} is CO{sub (gas)}+O{sub 2(ads)}{yields}CO{sub 3(ads)}{yields}O{sub (ads)}+CO{sub 2(gas)}; M{sub LH1} refers to CO{sub (ads)}+O{sub 2(ads)}{yields}O{sub (ads)}+CO{sub 2(ads)}; and M{sub LH2} refers to CO{sub (ads)}+O{sub 2(ads)}{yields}OOCO{sub (ads)}{yields}O{sub (ads)}+CO{sub 2(ads)}. Our transition state calculations clearly reveal that M{sub ER1} and M{sub LH2} are both viable; but M{sub ER1} mechanism preferentially operates, in which only a moderate energy barrier (60.22 kJ/mol) needs to be overcome. When CO oxidation takes place along M{sub ER2} path, it is facile for CO{sub 3} formation, but is difficult for its decomposition, thereby CO{sub 3} species can stably exist on Cu{sub 2}O(111). Of course, the reaction of CO with lattice O of Cu{sub 2}O(111) is also considered. However, the calculated barrier is 600.00 kJ/mol, which is too large to make the path feasible. So, we believe that on Cu{sub 2}O(111), CO reacts with adsorbed O, rather than lattice O, to form CO{sub 2}. This is different from the usual Mars-van Krevene mechanism. The present results enrich our understanding of the catalytic oxidation of CO by copper-based and metal-oxide catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗