Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Boronization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Very long single- and few-walled boron nitride nanotubes via the pressurized vapor/condenser method

Boron nitride nanotubes (BNNTs) are desired for their exceptional mechanical, electronic, thermal, structural, textural, optical, and quantum properties. A new method for producing long, small-diameter, single- and few-walled, boron nitride nanotubes (BNNTs) in macroscopic quantities is reported. The pressurized vapor/condenser (PVC) method produces, without catalysts, highly crystalline, very long, small-diameter, BNNTs. Palm-sized, cotton-like masses of BNNT raw material were grown by this technique and spun directly into centimeters-long yarn. Nanotube lengths were observed to be 100 times that of those grown by the most closely related method. Self-assembly and growth models for these long BNNTs are discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of polymer residues on the electrical properties of large-area graphene–hexagonal boron nitride planar heterostructures

Polymer residue plays an important role in the performance of 2D heterostructured materials. Herein, we study the effect of polymer residual impurities on the electrical properties of graphene–boron nitride planar heterostructures. Large-area graphene (Gr) and hexagonal boron nitride (h-BN) monolayers were synthesized using chemical vapor deposition techniques. Atomic van-der-Waals heterostructure layers based on varied configurations of Gr and h-BN layers were assembled. The average interlayer resistance of the heterojunctions over a 1 cm 2 area for several planar heterostructure configurations was assessed by impedance spectroscopy and modeled by equivalent electrical circuits. As a result, conductive AFM measurements showed that the presence of polymer residues on the surface of the Gr and h-BN monolayers resulted in significant resistance deviations over nanoscale regions.

36 MATERIALS SCIENCE↗

Magnetic Imaging with Spin Defects in Hexagonal Boron Nitride

Optically active spin defects hosted in hexagonal boron nitride (ℎ-BN) are promising candidates for the development of a two-dimensional (2D) quantum sensing unit. Here, we demonstrate quantitative magnetic imaging with ℎ-BN flakes doped with negatively charged boron-vacancy ($V^{-}_{B}$) centers through neutron irradiation. As a proof-of-concept, we image the magnetic field produced by Cr⁢Te 2 , a van der Waals ferromagnet with a Curie temperature slightly above 300 K. Compared to other quantum sensors embedded in 3D materials, the advantages of the ℎ-BN-based magnetic sensor described in this work are its ease of use, high flexibility, and, more importantly, its ability to be placed in close proximity to a target sample. Further, such a sensing unit will likely find numerous applications in 2D materials research by offering a simple way to probe the physics of van der Waals heterostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Superhard Semiconducting Optically Transparent High Pressure Phase of Boron

An orthorhombic (space group Pnnm) boron phase was synthesized at pressures above 9 GPa and high temperature, and it was demonstrated to be stable at least up to 30 GPa. The structure, determined by single-crystal x-ray diffraction, consists of B{sub 12} icosahedra and B{sub 2} dumbbells. The charge density distribution obtained from experimental data and ab initio calculations suggests covalent chemical bonding in this phase. Strong covalent interatomic interactions explain the low compressibility value (bulk modulus is K{sub 300} = 227 GPa) and high hardness of high-pressure boron (Vickers hardness H{sub v} = 58 GPa), after diamond the second hardest elemental material.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Crystal structures of Leishmania mexicana arginase complexed with α,α-disubstituted boronic amino-acid inhibitors

Leishmania arginase is a potential drug target for the treatment of leishmaniasis because this binuclear manganese metalloenzyme initiates de novo polyamine biosynthesis by catalyzing the hydrolysis of L-arginine to generate L-ornithine and urea. The product L-ornithine subsequently undergoes decarboxylation to yield putrescine, which in turn is utilized for spermidine biosynthesis. Polyamines such as spermidine are essential for the growth and survival of the parasite, so inhibition of enzymes in the polyamine-biosynthetic pathway comprises an effective strategy for treating parasitic infections. To this end, two X-ray crystal structures of L. mexicana arginase complexed with α,α-disubstituted boronic amino-acid inhibitors based on the molecular scaffold of 2-( S )-amino-6-boronohexanoic acid are now reported. Structural comparisons with human and parasitic arginase complexes reveal interesting differences in the binding modes of the additional α-substituents, i.e. the D side chains, of these inhibitors. Subtle differences in the three-dimensional contours of the outer active-site rims among arginases from different species lead to different conformations of the D side chains and thus different inhibitor-affinity trends. The structures suggest that it is possible to maintain affinity while fine-tuning intermolecular interactions of the D side chain of α,α-disubstituted boronic amino-acid inhibitors in the search for isozyme-specific and species-specific arginase inhibitors.

59 BASIC BIOLOGICAL SCIENCES↗

Boron-10 Based Neutron Coincidence Counter for Safeguards

The shortage of 3He has triggered the search for effective alternative neutron detection technologies for national security applications, including international nuclear safeguards. Any alternative neutron detection technology must satisfy two basic criteria: it must meet a neutron detection efficiency requirement, and it must be insensitive to gamma-ray interference at a prescribed level while still meeting the neutron detection requirement. For nuclear safeguards, a system must perform measurements in the field with a prescribed precision in a specified time. This paper describes an effort to design, model and test an alternatives-based neutron coincidence counter for nuclear safeguards applications. The technology chosen for use in an alternatives-based uranium neutron coincidence collar was boron-lined proportional counters. Extensive modeling was performed of various system configurations and comparisons were made to measurements on a commercial prototype boron-10 based uranium neutron coincidence collar.

alternative neutron detectors↗

Vibronic fine structure in high-resolution x-ray absorption spectra from ion-bombarded boron nitride nanotubes

The authors have applied high-resolution near-edge x-ray absorption fine structure measurements around the nitrogen K-edge to study the effects of ion-bombardment on near-surface properties of boron nitride nanotubes. A notable difference has been observed between surface sensitive partial electron yield (PEY) and bulk sensitive total electron yield (TEY) fine-structure measurements. The authors assign the PEY fine structure to the coupling of excited molecular vibrational modes to electronic transitions in NO molecules trapped just below the surface. Oxidation resistance of the boron nitride nanotubes is significantly reduced by low energy ion bombardment, as broken B-N bonds are replaced by N-O bonds involving oxygen present in the surface region. In contrast to the PEY spectra, the bulk sensitive TEY measurements on as-grown samples do not exhibit any fine structure while the ion-bombarded samples show a clear vibronic signature of molecular nitrogen.

36 MATERIALS SCIENCE↗

Hydrogenation effects on carrier transport in boron-doped ultrananocrystalline diamond/amorphous carbon films prepared by coaxial arc plasma deposition

Boron-doped ultrananocrystalline diamond/hydrogenated amorphous carbon composite (UNCD/a-C:H) films were deposited by coaxial arc plasma deposition with a boron-blended graphite target at a base pressure of <10{sup −3} Pa and at hydrogen pressures of ≤53.3 Pa. The hydrogenation effects on the electrical properties of the films were investigated in terms of chemical bonding. Hydrogen-scattering spectrometry showed that the maximum hydrogen content was 35 at. % for the film produced at 53.3-Pa hydrogen pressure. The Fourier-transform infrared spectra showed strong absorptions by sp{sup 3} C–H bonds, which were specific to the UNCD/a-C:H, and can be attributed to hydrogen atoms terminating the dangling bonds at ultrananocrystalline diamond grain boundaries. Temperature-dependence of the electrical conductivity showed that the films changed from semimetallic to semiconducting with increasing hydrogen pressure, i.e., with enhanced hydrogenation, probably due to hydrogenation suppressing the formation of graphitic bonds, which are a source of carriers. Carrier transport in semiconducting hydrogenated films can be explained by a variable-range hopping model. The rectifying action of heterojunctions comprising the hydrogenated films and n-type Si substrates implies carrier transport in tunneling.

36 MATERIALS SCIENCE↗

GPU-based prompt gamma ray imaging from boron neutron capture therapy

Purpose: The purpose of this research is to perform the fast reconstruction of a prompt gamma ray image using a graphics processing unit (GPU) computation from boron neutron capture therapy (BNCT) simulations. Methods: To evaluate the accuracy of the reconstructed image, a phantom including four boron uptake regions (BURs) was used in the simulation. After the Monte Carlo simulation of the BNCT, the modified ordered subset expectation maximization reconstruction algorithm using the GPU computation was used to reconstruct the images with fewer projections. The computation times for image reconstruction were compared between the GPU and the central processing unit (CPU). Also, the accuracy of the reconstructed image was evaluated by a receiver operating characteristic (ROC) curve analysis. Results: The image reconstruction time using the GPU was 196 times faster than the conventional reconstruction time using the CPU. For the four BURs, the area under curve values from the ROC curve were 0.6726 (A-region), 0.6890 (B-region), 0.7384 (C-region), and 0.8009 (D-region). Conclusions: The tomographic image using the prompt gamma ray event from the BNCT simulation was acquired using the GPU computation in order to perform a fast reconstruction during treatment. The authors verified the feasibility of the prompt gamma ray image reconstruction using the GPU computation for BNCT simulations.

60 APPLIED LIFE SCIENCES↗

TU-FG-BRB-07: GPU-Based Prompt Gamma Ray Imaging From Boron Neutron Capture Therapy

Purpose: The purpose of this research is to perform the fast reconstruction of a prompt gamma ray image using a graphics processing unit (GPU) computation from boron neutron capture therapy (BNCT) simulations. Methods: To evaluate the accuracy of the reconstructed image, a phantom including four boron uptake regions (BURs) was used in the simulation. After the Monte Carlo simulation of the BNCT, the modified ordered subset expectation maximization reconstruction algorithm using the GPU computation was used to reconstruct the images with fewer projections. The computation times for image reconstruction were compared between the GPU and the central processing unit (CPU). Also, the accuracy of the reconstructed image was evaluated by a receiver operating characteristic (ROC) curve analysis. Results: The image reconstruction time using the GPU was 196 times faster than the conventional reconstruction time using the CPU. For the four BURs, the area under curve values from the ROC curve were 0.6726 (A-region), 0.6890 (B-region), 0.7384 (C-region), and 0.8009 (D-region). Conclusion: The tomographic image using the prompt gamma ray event from the BNCT simulation was acquired using the GPU computation in order to perform a fast reconstruction during treatment. The authors verified the feasibility of the prompt gamma ray reconstruction using the GPU computation for BNCT simulations.

60 APPLIED LIFE SCIENCES↗

Synthesis of Porous Composite Materials via Combustion of a Mixture of Titanium, VT6 Alloy, and Amorphous Boron Powders

Self-propagating high-temperature synthesis without preheating has been realized in powder mixtures consisting of large spherical VT6 titanium alloy granules, small dendritic titanium particles, and black amorphous boron. Synthesis in a combustion wave involved a few steps: first, boron reacted with fine-particle titanium to form a boride matrix, which then reacted with molten VT6 titanium alloy granules. We have obtained a porous metal–ceramic material similar in structure to composites.

36 MATERIALS SCIENCE↗

Luminescence of a Polymer Composite Doped with Boron Chelates. Mechanism of Luminescence Sensitization

It has been revealed that a sensitized luminescence of AntAcBF{sub 2} is observed in the boron difluoride dibenzoylmethanate (DBMBF{sub 2})–boron difluoride anthracenoylacetonate (AntAcBF{sub 2}) system in the polystyrene matrix. The emission mechanism of energy transfer from DBMBF{sub 2} to AntAcBF{sub 2} has been established. The luminescence properties of bilayer films with one layer containing DBMBF{sub 2} and another one containing AntAcBF{sub 2} have been investigated. At luminophore contents in equimolar quantities, one observes a white luminescence of the bilayer polymer composite.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Boron carbide coating deposition on tungsten and testing of tungsten layers and coating under intense plasma load

A device intended for boron carbide coating deposition and material testing under high heat loads is presented. A boron carbide coating 5 μm thick was deposited on the tungsten substrate. These samples were subjected to thermocycling loads in the temperature range of 400–1500°C. Tungsten layers deposited on tungsten substrates were tested in similar conditions. Results of the surface analysis are presented.

36 MATERIALS SCIENCE↗

Apparent low-frequency charge capacitance of semiconducting boron

The low-frequency charge capacitance for semiconductor boron samples proves to be ten times higher in comparison with the geometrical value calculated from the sample sizes under the assumption of material homogeneity. The explanation to the observable stepwise behavior for the capacitance temperature dependence can be found on the basis of the generalized barrier model for a inhomogeneous semiconductor within the context of its three-layer variant. It seems that the planar defects characteristic of real boron crystals generate elastic stresses, which are sufficiently high for a local decrease in conductivity. In addition, the low-conductivity barrier layers should also arise at the interfaces of similar inclusions with a relatively high-conductivity matrix.

36 MATERIALS SCIENCE↗

A DLTS study of 4H-SiC-based p-n junctions fabricated by boron implantation

Deep-level transient spectroscopy (DLTS) has been used to study p-n junctions fabricated by implantation of boron into epitaxial 4H-SiC films with n-type conductivity and the donor concentration (8-9) Multiplication-Sign 10{sup 14} cm{sup -3}. A DLTS signal anomalous in sign is observed; this signal is related to recharging of deep compensating boron-involved centers in the n-type region near the metallurgical boundary of the p-n junction.

36 MATERIALS SCIENCE↗

Optical properties of silicon with a high content of boron

After exposure of silicon with a high content of boron and oxygen to light with the spectrum close to that of solar radiation and with the intensity 70-80 mW cm{sup -2}, a new defect corresponding to the absorption band observed at liquid-helium temperature at the frequency 1026.7 cm{sup -1} is detected in the material. It is shown that the components of the defect are boron and oxygen atoms. The defect is formed at a considerable concentration of free charge carriers induced by exposure of the sample to light or by heat treatments at a low current flow through the sample. It is thought that the defect can be formed due to the direct interaction between the components as well as via the precursors of the stable form of the defect. It is shown that doping of silicon with germanium reduces the efficiency of the formation of the defect corresponding to the detected absorption band.

36 MATERIALS SCIENCE↗

Atomic composition and electrical characteristics of epitaxial CVD diamond layers doped with boron

The results of analysis of the atomic composition, doping level, and hole mobility in epitaxial diamond layers when doped with boron are reported. The layers are produced by chemical-vapor deposition. The possibilities of uniform doping with boron to a level in the range 5 × 10{sup 17} to ~10{sup 20} at cm{sup –3} and of δ doping to the surface concentration (0.3–5) × 10{sup 13} at cm{sup –3} are shown. The conditions for precision ion etching of the structures are determined, and barrier and ohmic contacts to the layers are formed.

36 MATERIALS SCIENCE↗

Multiphonon Intracenter Relaxation of Boron Acceptor States in Diamond

The relaxation rates are calculated in the adiabatic approximation, in which the steady-state impurity states are taken to be electronic-vibrational (vibronic) states. The probabilities of transitions between these states with the emission (or absorption) of one or several phonons are calculated in first-order perturbation theory on the assumption that the transitions are a result of the violation of adiabaticity. The electron part of the wave function of the vibronic state is described by a simple Hamiltonian with an isotropic effective mass. The wave function of the ground state is determined by the quantum defect method. According to the calculations, a hole relaxes from the excited boron acceptor state, whose energy is 304 meV higher than the energy of the ground state, to the ground state with the emission of two optical phonons with a rate of ~10{sup 11} s{sup –1}. This value is an estimate from above, since the model of nondispersive optical phonons used in the study overestimates the number of phonon modes, whose participation in relaxation is allowed by the energy conservation law. However, despite the rough approximation, it can be concluded that the multiphonon relaxation of boron acceptor states in diamond is a fast process.

36 MATERIALS SCIENCE↗