Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Blanket”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Experimental temperature distribution and heat load characteristics of rotating heat pipes

Experimental results show conclusively that the presence of a small quantity of a noncondensable gas (NCG) mixed with the working fluid has a considerable effect on the condensation process in a rotating heat pipe. The temperature distribution in the condenser shows the blanketing effect of the NCG and the ratio of the molecular weight of the working fluid to that of the NCG has a very definite effect on the shape of this distribution. Some of the effects are quite similar to the well-established data on stationary heat pipes.

Daniels, T. C.↗
NASA NTRS1978

Mercurian global tectonics - A consequence of tidal despinning

The surface of Mercury exhibits a global tectonic system consisting of an ancient set of NE and NW tending lineaments and a younger set of planimetrically arcuate escarpments interpreted as thrust of high-angle reverse faults. The trends, distribution, and age relations of these tectonic features can be explained by a combination of tidal despinning and global contraction of the planet. In our model, early tidal despinning resulted in conjugate shear fractures trending roughly N60 deg E and N60 deg W which were subsequently modified by a variety of surface processes to produce the presently visible set of lineaments. Continued despinning plus global contraction produced thrust faults with roughly north-south trends. Final contraction may have postdated despinning and produced randomly oriented thrust faults. All of these events predated the formation of Caloris basin, because basin-associated deposits blanket both lineaments and arcuate thrust faults.

Melosh, H. J.↗
NASA NTRS1980

Heated tool for autoclaves

Components made of composite materials are heated in autoclaves by employing electrical resistance heating blankets, thus avoiding need to heat entire autoclave volume. Method provides not only significant energy savings compared to heating entire pressure vessel but offers time savings in accelerated heat-up and cool-down cycles.

Serafini, T. T.↗
NASA NTRS1978

Helicopter internal noise reduction research and development application to the SA 360 and SA 365 Dauphin

Noise sources inside helicopter cabins are considered with emphasis on the mechanisms of vibration generation inside the main gear box and mechanisms of transmission between source and cabin. The dynamic behavior of the main gear box components is examined in relation to the transfer of vibration energy to the structure. It is indicated that although improvements can be made in noise reduction at the source, a soundproofing treatment isolating the passenger from the noise source is necessary. Soundproofing treatments installed and optimized include: (1) an acoustic screen using the weight effect to isolate the passenger from the noise source; (2) a damping treatment to limit the conversion of the vibratory energy into acoustic energy; and (3) an absorbing treatment achieved either through HELMHOLTZ resonators or through a glass wool blanket to limit the propagation of acoustic waves and the wave reflection effects in the cabin. The application of treatments at the source and the optimization of the sound barriers improved the noise level by about 30 db.

Marze, H. J.↗
NASA NTRS1978

Parametric study of two planar high power flexible solar array concepts

The design parameters examined were: frequency, aspect ratio, packaging constraints, and array blanket flatness. Specific power-to-mass ratios for both solar arrays as a function of array frequency and array width were developed and plotted. Summaries of the baseline design data, developed equations, the computer program operation, plots of the parameters, and the process for using the information as a design manual are presented.

Garba, J. A.↗
NASA NTRS1978

Conceptual approach study 200 watt per kilogram solar array, phase 3

Activities are described that were directed by JPL to support the earlier conceptual design work with proof of concept models on the one hand, and laboratory test and evaluation of alternate designs and materials that hold promise for further mass economies, on the other. In support of this advanced solar blanket technology the following work was accomplished: (1) preparation of an 80 cell solar module for a 1000 cycle thermal test (2) fabrication of a 660 cell solar panel and performance evaluation of this article after a '0' g flight test, (3) design improvement of the cell interconnect for further mass reduction, (4) completion of UV exposure and thermal cycle tests for a variety of cell cover material and adhesives and (5) preparation of a quantity of representative solar array test specimens for space flight on NASA's Long Duration Exposure Facility (LDEF).

Rayl, G. J.↗
NASA NTRS1977

The physics of gridded and conductive coated dielectrics for spacecraft

Theoretical aspects of electrostatic control and design of gridded and conductive film bonded polymers, for spacecraft Thermo-optical blankets are considered. Brief commentaries relative to the salient features of the primarily developed facility for and characterization of said polymers is also considered.

Okress, E. C.↗
NASA NTRS1979

Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 5: Special emphasis studies

Specific areas were analyzed and identified as high priority for more in-depth analysis. These areas were: (1) rectenna constructability; (2) satellite constructability; (3) support systems constructability; (4) space environmental analysis, and (5) special end-to-end analyses. Baseline requirements specified coplanar solar blankets and an end mounted antenna, utilizing either GaAlAs solar cells and employing a CR of 2, or Si cells. Several configurations were analyzed. Utilizing the preferred configuration as a baseline, a satellite construction base was defined, precursor operations incident to establishment of orbital support facilities identified, and the satellite construction sequence and procedures developed. Since the baseline specifies sixty instead of one hundred and twenty satellites to be constructed in a thirty year period, mass flow to orbit requirements were revised and new traffic models established. Launch site requirements (exclusive of actual launch operations) in terms of manpower and building space were defined.

Hanley, G.↗
NASA NTRS1979

Space environmental effects and the solar power satellite

Some preliminary findings regarding the interactions between the space plasma at GEO and the Marshall Space Flight Center January 1978 baseline Satellite Power Systems (SPS) design are summarized. These include the following: (1) the parasitic load will be dominated by photoelectrons and will amount to about 34 MW; (2) material of higher conductivity than kapton should be used for the solar reflector substrate and the solar cell blanket support material; (3) the satellite structure and solar reflector should be tied electrically to midpoint voltage of each solar cell array; and (4) tests should be run on the proposed solar cell cover glass material (synthetic sapphire) to determine if breakdown is expected.

Freeman, J. W.↗
NASA NTRS1978

Solar cells for solar power satellites

The concept of a solar-cell array for a solar power satellite is developed to permit evaluation of its economic feasibility for generating power for delivery to public utilities on earth. Gallium arsenide solar cells were considered but it could not be assured that the world gallium resources could support constructions of two solar power satellites per year. Therefore, for preliminary design an array blanket made from 5 by 10 cm silicon solar cells, 50 microns thick, and electrostatically bonded between borosilicate glass sheets was adopted. In annealing experiments, a radiated 50 microns thick cell was restored to its initial performance in a 500 C. Solar-cell efficiency effects significantly the solar power satellite mass, which varies from 90,000 metric tons for 20 percent cells to 120,000 metric tons for 12 percent cells. The anticipated cost of delivered power, based on 1977 dollars, varies from 4 cents per kWh with 18 percent cells, to 5 cents per kWh for 12 percent efficient cells.

Oman, H.↗
NASA NTRS1979

The NASA Lewis Research Center program in space solar cell research and technology

Progress in space solar cell research and technology is reported. An 18 percent-AMO-efficient silicon solar cell, reduction in the radiation damage suffered by silicon solar cells in space, and high efficiency wrap-around contact and thin (50 micrometer) coplanar back contact silicon cells are among the topics discussed. Reduction in the cost of silicon cells for space use, cost effective GaAs solar cells, the feasibility of 30 percent AMO solar energy conversion, and reliable encapsulants for space blankets are also considered.

Brandhorst, H. W., Jr.↗
NASA NTRS1978

Space solar power - An energy alternative

The space solar power concept is concerned with the use of a Space Power Satellite (SPS) which orbits the earth at geostationary altitude. Two large symmetrical solar collectors convert solar energy directly to electricity using photovoltaic cells woven into blankets. The dc electricity is directed to microwave generators incorporated in a transmitting antenna located between the solar collectors. The antenna directs the microwave beam to a receiving antenna on earth where the microwave energy is efficiently converted back to dc electricity. The SPS design promises 30-year and beyond lifetimes. The SPS is relatively pollution free as it promises earth-equivalence of 80-85% efficient ground-based thermal power plant.

Johnson, R. W.↗
NASA NTRS1978

Feldspathic granulite 79215 - Limitations on T-fo2 conditions and time of metamorphism

Feldspathic granulite 79215, an annealed polymict breccia which has a bulk composition between anorthositic gabbro and gabbroic anorthosite, contains numerous oxide complexes in the matrix. An Ar-39-Ar-40 stepwise heating experiment gives a well-defined plateau corresponding to an age of 4.03 + or - 0.02 AE. The polmict character of this breccia and the variability of the complexes suggest that they formed as a consequence of reactions between spinel-rich clasts and matrix under the high-T low-P conditions of an ejecta blanket. The duration of annealing is estimated to have been less than 10 million yr; the absence of a KREEP component may indicate an inhomogeneous distribution of this component at the lunar surface at 4.0 AE.

Mcgee, J. J.↗
NASA NTRS1978

Regolith depositional history at Shorty Crater

Nuclear particle track measurements in the 68 cm double drive tube 74002-74001 indicate that the whole core was deposited in one event some 10 m.y. ago. Significant reworking of the soil only occurred down to a few cm from the lunar surface since this event. Complementary investigations in this core by other groups are discussed. Most of the evidence available leads to a two stage model in which the orange and black soils collected at Shorty Crater were first irradiated for approximately 25 m.y. at some depth and then were deposited only a few m.y. ago as an overturned ejecta blanket.

Crozaz, G.↗
NASA NTRS1979

Far ultraviolet photometry of intermediate brightness stars from Apollo-Soyuz

We present photoelectric photometry in the 1350-1600 A band of 52 stars of intermediate brightness, using data obtained in 1975 July with a grazing incidence telescope aboard the Apollo-Soyuz Test Project. Upper or lower limits on the brightness of 106 additional objects which were spatially blended with one or more companions were also obtained. The data sample consists of stars with V not greater than 7.5 and spectral types from O6 through A5. When corrected for interstellar extinction, the ultraviolet photometry on a two-color diagram agrees very well with the predictions of the revised blanketed model atmospheres by Kurucz. Attention is also drawn to an anomalously UV-bright object which is probably associated with HD 100493.

Crawford, R.↗
NASA NTRS1979

Thermal infrared properties of the Martian atmosphere. I - Global behavior at 7, 9, 11, and 20 microns

Infrared observations of Mars by the Viking infrared thermal mapper (IRTM) are presented for conditions of both a relatively clear and a dust-laden atmosphere. The 7-, 9-, 11-, and 20-micron bands of the IRTM respond differently to radiation emitted through and by a dusty atmosphere, permitting characterization of the global atmospheric state, monitoring of secular changes, and derivation of optical depth information. Surface temperature behavior is found to be greatly modified by the diminution of insolation and thermal blanketing resulting from global dust storms. Brightness temperature at 7 microns is employed to estimate surface temperatures in the presence of dust absorption. The difference (T7) is indicative of airborne dust when thermal contrast exists between the surface and atmosphere. The diurnal behavior of T7-T9 reveals changes in the contrast; the sign of the differential reverses as the surface, warmer than the atmosphere in daytime, becomes cooler than the atmosphere at night. IRTM observations of local areas at varying emission angle yield optical depths indicative of global trends. Two global dust storms in 1977 produced large optical depth changes: at 9 microns the optical depth became as large as 2.0.

Martin, T. Z.↗
NASA NTRS1979

Nonterrestrial material processing and manufacturing of large space systems

Nonterrestrial processing of materials and manufacturing of large space system components from preprocessed lunar materials at a manufacturing site in space is described. Lunar materials mined and preprocessed at the lunar resource complex will be flown to the space manufacturing facility (SMF), where together with supplementary terrestrial materials, they will be final processed and fabricated into space communication systems, solar cell blankets, radio frequency generators, and electrical equipment. Satellite Power System (SPS) material requirements and lunar material availability and utilization are detailed, and the SMF processing, refining, fabricating facilities, material flow and manpower requirements are described.

Von Tiesenhausen, G.↗
NASA NTRS1979

Evidence for explosive volcanic density currents on certain Martian volcanoes

The morphologies of certain of the smaller Martian volcanoes are discussed as possible results of explosive volcanic density currents. An examination of newly-photographed flank and caldera features of the Martian volcanoes Ceraunius Tholus, Uranius Tholus, Uranius Patera and Hecates Tholus, including steep slope angles, Krakatoa-type caldera morphologies, erosional features (radial channels and anastamosing gullies) and constructional features (blanketed flanks and possible lava deltas) reveals their similarity to terrestrial cones and composite volcanoes such as Barcena Volcano. Crater age data from the surface of Martian domes and shields indicates that such explosive activity occurred more frequently early in Martian geologic history, consistent with the view that the volcanic density currents were base surges rather than nuees ardentes, with the melting of permafrost supplying the water required in base surge generation.

Reimers, C. E.↗