Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Atomic & molecular structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Local rare-earth dopant structure in a complex-oxide/semiconductor heterojunction: Molecular beam epitaxy grown Yb-doped SrTiO3 on Si(001)

We have investigated the structural and electronic properties of Yb-doped SrTiO3/Si(001) grown by molecular beam epitaxy. Other rare-earth donor dopants that result in n-type conductivity typically substitute for Sr at the A-sites in the perovskite lattice. In contrast, Yb has been found to substitute predominantly for Ti at the perovskite B-sites based on data from atomically resolved scanning transmission electron microscopy and spectroscopy, as well as extended x-ray absorption fine structure. Yb exhibits two distinct charge states as determined by x-ray absorption spectroscopy and associated modeling, +2.7 and +2.1. These aliovalent substitutional dopants are compensated by donor electrons from oxygen vacancies that form during epitaxial film growth. An atom beam flux mismatch was present during film depositions because it was assumed that Yb would occupy A-sites, leading to a flux matching formula given by Yb + Sr = Ti. However, the formation of YbTi rather than YbSr results in Sr vacancies and extraneous (i.e. non-lattice) Ti atoms in the films, or on the film surfaces. The presence of these defects, together with oxygen vacancies, leads to deep-level electron traps that were detected by resonant photoemission and much higher sheet resistance than that associated with, for instance, La-doped films.

Chambers, Scott A. (ORCID:000000025415043X)↗
DOE OSTI2022

Chemical Interpretation of Charged Point Defects in Semiconductors: A Case Study of Mg 2 Si

The electronic structures of charged point defects influence electrical and optical properties of semiconductors. Understanding the orbital interactions responsible for the electronic structures of defects therefore promotes a chemical intuition for defect-driven mechanisms in semiconductors. In this tutorial, we discuss a molecular orbital theory-based framework for understanding defect-induced electronic states based on local chemical interactions between the defect and the atoms surrounding the defect site. By using Mg 2 Si as a case study, we show how both the chemical interactions and molecular orbitals (i. e., wave functions) responsible for the charge state(s) of a defect can be understood from the bonding symmetry of the defect site. We anticipate that a chemistry-based perspective of charged defects will enrich defect engineering efforts for electronic and optical materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Anomalous fast atomic dynamics in bulk metallic glasses

It is believed that the strong glass formers tend to be dense packing and have rather slow atomic dynamics. Here, we report that the anomalous fast atomic dynamics exist in an Au 55 Cu 20 Ag 5 Si 20 metallic glass (MG) with good glass forming ability (GFA) by combining X-ray photon correlation spectroscopy measurements with ab initio molecular dynamics simulations. The fast dynamics are mainly originated from the increased mobility of Cu atoms by Ag addition. Ag atoms are inclined to locate at Cu-centered <0, 2, 8, 1> motifs, which slow or accelerate the dynamics of shell Cu atoms, depending on whether Ag atoms appear at the first shells or not, leading to the formation of structural heterogeneity at the atomic level. The results enrich the understanding of atomic dynamics in Cue-Ag-containing MGs and will trigger more studies on the dynamics-GFA relationship in MGs.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Gas-phase synthesis of naphthalene through an unconventional thermal alkyne–alkene [2 + 2] cycloaddition mechanism

Exotic cycloaddition entrance channels were discovered for the bimolecular gas-phase reactions of the phenylethynyl radical (C 6 H 5 CC, X 2 A 1 ) with ethylene-d 4 (C 2 D 4 ) and propylene (C 3 H 6 ) as explored under single-collision conditions utilizing the crossed molecular beams technique combined with electronic structure and statistical calculations. Connecting the concepts of barrierless entrance channels, excited states, and facile non-photochemically activated cycloadditions, the reaction pathway features an unconventional thermal [2 + 2] cycloaddition forming a four-membered ring collision complex followed by multiple isomerizations prior to unimolecular decomposition via atomic hydrogen loss to (un)substituted naphthalenes—naphthalene-d 4 (C 10 H 4 D 4 ) and 1-/2-methylnaphthalene (C 11 H 10 ). The small energy gap between the singly-occupied a 1 highest occupied molecular orbital (HOMO) with a σ-character and the underlying doubly-occupied b 1 molecular orbital with a π-character allows a facile promotion of an electron. This in turn enables a versatile low-temperature reactivity of phenylethynyl, where the end-on and side-on barrierless approaches of ethylene are due to its interaction with the σ and π orbitals, respectively, thus suggesting this mechanism as a possible method for tuning substituents in polycyclic aromatic hydrocarbon (PAH) formation and highlighting its versatility as a probe of fundamental carbon chemistry via counterintuitive cycloaddition reactions under single-collision conditions.

Goettl, Shane J. [University of Hawaii at Manoa, H↗
DOE OSTI2023

Computational modeling of grain boundary segregation: A review

Nearly all metals, alloys, ceramics, and their associated composites are polycrystalline in nature, with grain boundaries that separate well-defined crystalline regions that influence materials properties. In all but the most pure elemental systems, intentional solutes or impurities are present and can segregate to, or less commonly away from, the grain boundaries, in turn influencing boundary behavior, their stability, and associated materials properties. In some cases, grain-boundary segregation can also trigger “phase-like” structural transitions that dramatically alter the essential nature of the boundary. With the development of advanced electron microscopy techniques, researchers can directly observe grain-boundary structures and segregation with atomic precision. Despite such spatial resolution, the underlying mechanisms governing grain-boundary segregation remain difficult to characterize. As a result, computational modeling techniques such as density functional theory, molecular dynamics, mesoscale phase-field, continuum defect theory, and others are important complementary tools to experimental observations for studying grain-boundary segregation behavior. In conclusion, these computational methods offer the ability to explore the underlying formation mechanisms of grain-boundary segregation, elucidate complex segregation behavior, and provide insights into solutions to effectively controlling microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Strongly Anisotropic Thermomechanical Response to Shock Wave Loading in Oriented Samples of the Triclinic Molecular Crystal 1,3,5-Triamino-2,4,6-trinitrobenzene

All-atom molecular dynamics (MD) simulations were used to study shock wave loading in oriented single crystals of the highly anisotropic triclinic molecular crystal 1,3,5-triamino-2,4,6-trinitrobenzene (TATB). The crystal structure consists of planar hydrogen-bonded sheets of individually planar TATB molecules that stack into graphitic-like layers. Shocks were studied for seven systematically prepared crystal orientations with limiting cases that correspond to shock propagation exactly perpendicular and exactly parallel to the graphitic-like layers. The simulations were performed for initially defect-free crystals using a reverse-ballistic configuration that generates explicit, supported shocks. Final longitudinal stress components are between ≈8.5 and ≈10.5 GPa for the 1.0 km s –1 impact speed studied. Orientation-dependent properties are reported including shock speeds, stresses, temperatures, compression ratios, and local material strain rates. Spatiotemporal maps of the temperature, stress tensor, material flow, and molecular orientations reveal complicated processes that arise for specific shock directions. Furthermore, the results indicate that TATB shock response is highly sensitive to crystal orientation, with significant qualitative differences for the time evolution of the stress tensor and temperature, elastic/inelastic compression response, defect formation and growth, critical von Mises stress, and strain rates during shock rise that span nearly an order of magnitude. A variety of inelastic deformation mechanisms are identified, ranging from crumpling of graphitic-like layers to dislocation-mediated plasticity to intense shear strain localization. To our knowledge, these are the first systematic MD simulations and analysis of explicit shock wave propagation along nontrivial crystal directions in a triclinic molecular crystal.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Decoding Zeolite Crystallization and Stage III in Nuclear Waste Glasses by Coupled Modeling and Experiments

Under specific conditions of pH and temperature, nuclear waste immobilization borosilicate glasses may exhibit a sudden acceleration in their corrosion kinetics (stage III)—a behavior that has been associated with the formation of zeolite crystals. Such accelerated dissolution may compromise the integrity of nuclear wasteforms placed in geological depositories. However, thus far, none of the available models is able to predict the thermodynamic propensity and kinetics of zeolite precipitation as a function of the solution conditions due to (i) a lack of fundamental knowledge regarding the nucleation & growth mechanisms of zeolitic phases, (ii) uncertainty regarding the compositions (types) of zeolites that may form and the rate-limiting step in their precipitation as a function of the solution conditions, and (iii) the complexities that arise due to the vast parametric space (i.e., solution chemistry, temperature, number of secondary phases, etc.) that encompass these systems under conditions of environmental exposure. To resolve these challenges, this project aimed to unambiguously identify the thermodynamic propensity for zeolite precipitation and the kinetics thereof as a function of the solution conditions (composition, pH, and temperature). To achieve this goal: 1) We identified the solution conditions and zeolite phases relevant to nuclear glass dissolution. 2) We performed a series of ab initio molecular dynamics (AIMD) simulations to compute the thermodynamic properties of a group of characteristic zeolites that features a large range of compositions, various hydration levels, a wide range of framework structures, and partial atomic site occupancies. 3) We released a first-of-a-kind self-consistent thermodynamic database that can be used to assess the kinetics and the stability fields of zeolitic phases within a Gibbs energy minimization (GEM) framework. 4) We developed a robust geochemical modeling method allowing us to predict the stability of secondary phases (including zeolites, calcium–silicate–hydrate gels, and clays) upon the dissolution of nuclear waste immobilization glasses. 5) We introduced a model that predicts the dissolution kinetics of a series of borosilicate nuclear waste immobilization glasses in terms of the topology of their atomic network. 6) We investigated the roles of the solution composition on the crystallization kinetics of phillipsite zeolites and tobermorite silicate hydrates. Via PNNL’s collaboration and engagement, this project directly supports DOE’s nuclear waste immobilization activities by offering a technical, science-based foundation that will (i) facilitate predictions of the long-term corrosion rates and extents of existing nuclear waste immobilization glasses to help ensure safe and successful vitrification operations, (ii) inform the development of advanced glass formulations with enhanced durability, and, (iii) enable cost-savings that result from making more decisive and hence less conservative predictions while offering higher levels of nuclear waste embedment in smaller, more compact glass volumes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Configuration–Interaction Perturbation Theory Calculations of Pu II

Configuration–interaction perturbation theory (CI–PT) is applied to calculations of low-energy states of Pu II. This ion is quite challenging due to a large number of possible determinants arising from seven valence electrons and strong relativistic effects. The CI–PT calculations agree with experiments for the energies and g-factors for many low-energy states that allowed positive identification of the theoretical levels. Isotope shifts were also used to aid in identification, and, in case of the odd states, fitting with three independent parameters was used to match theoretical isotope shifts to the experimental values with good accuracy. The CI–PT approach tested here on the Pu II ion can be generally used to calculate properties of many complex atoms, including U I that can find application in fundamental and applied science.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1991

Theory and laboratory astrophysics

Science opportunities in the 1990's are discussed. Topics covered include the large scale structure of the universe, galaxies, stars, star formation and the interstellar medium, high energy astrophysics, and the solar system. Laboratory astrophysics in the 1990's is briefly surveyed, covering such topics as molecular, atomic, optical, nuclear and optical physics. Funding recommendations are given for the National Science Foundation, NASA, and the Department of Energy. Recommendations for laboratory astrophysics research are given.

Schramm, David N.↗
NASA NTRS1998

Structure of Boron Nitride Nanotubes: Tube Closing Vs. Chirality

The structure of boron nitride nanotubes is investigated using a generalized tight-binding molecular dynamics method. It is shown that dynamic relaxation results in a wavelike or "rippled" surface in which the B atoms rotate inward and the N atoms move outward, reminiscent of the surface relaxation of the III-V semiconductors. More importantly, the three different morphologies of the tube closing with flat, conical and amorphous ends, as observed in experiments, are shown to be directly related to the tube chiralities. The abundance of flat end tubes observed in experiments is, thus, shown to be an indication of the greater stability of "zig-zag" BN tubes over the "arm-chair" tubes under experimental conditions.

Srivastava, Deepak↗
DOE OSTI2023

CHGNet as a pretrained universal neural network potential for charge-informed atomistic modelling

Large-scale simulations with complex electron interactions remain one of the greatest challenges for atomistic modelling. Although classical force fields often fail to describe the coupling between electronic states and ionic rearrangements, the more accurate ab initio molecular dynamics suffers from computational complexity that prevents long-time and large-scale simulations, which are essential to study technologically relevant phenomena. Here we present the Crystal Hamiltonian Graph Neural Network (CHGNet), a graph neural network-based machine-learning interatomic potential (MLIP) that models the universal potential energy surface. CHGNet is pretrained on the energies, forces, stresses and magnetic moments from the Materials Project Trajectory Dataset, which consists of over 10 years of density functional theory calculations of more than 1.5 million inorganic structures. The explicit inclusion of magnetic moments enables CHGNet to learn and accurately represent the orbital occupancy of electrons, enhancing its capability to describe both atomic and electronic degrees of freedom. We demonstrate several applications of CHGNet in solid-state materials, including charge-informed molecular dynamics in Li x MnO 2 , the finite temperature phase diagram for Li x FePO 4 and Li diffusion in garnet conductors. We highlight the significance of charge information for capturing appropriate chemistry and provide insights into ionic systems with additional electronic degrees of freedom that cannot be observed by previous MLIPs.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Intra-molecular coupling within double-segmented molecules impacting magnetic tunnel junction-based molecular spintronics devices

The intra-molecular coupling within multiple units of paramagnetic molecules can produce various effects on molecular spintronics devices (MSD). Here, this paper focuses on double-segmented molecules as the device element to advance understanding of the Impact of internal molecular structure on magnetic tunnel junction-based MSD (MTJMSD). We performed Monte Carlo simulations (MCS) to fill the knowledge gap about the intramolecular coupling role in the magnetic properties of the MTJMSD. This study explored a double-segmented molecule containing two atomic sections, each with a net spin state interacting via Heisenberg exchange coupling within molecules and with ferromagnetic electrodes at different thermal energies, magnetic fields, and coupling strengths. This study also investigated the effect of magnetic field on the double-segmented molecule-based cross-junction-shaped MTJMSD. We also compared the effect of the magnetic field on the mono and double-segmented molecules when connected to two ferromagnetic electrodes. In the strong coupling regime, the intramolecular coupling and molecule coupling with the two ferromagnetic electrodes dominated the MTJMSD response near the molecular junction area. This study provides insight for evaluating the impact of molecular nanostructure internal connectedness on the integrated MSD.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on ZnH12(NO3)2 by Materials Project

ZnNHO3(H2)5HNO3 crystallizes in the monoclinic P2_1/c space group. The structure is zero-dimensional and consists of sixteen hydrogen molecules, four molecular hydrogen molecules, four nitric acid molecules, and four ZnNHO3 clusters. In each ZnNHO3 cluster, Zn2+ is bonded in a distorted linear geometry to one H1+ and one O2- atom. The Zn–H bond length is 1.51 Å. The Zn–O bond length is 1.89 Å. N1- is bonded in a trigonal planar geometry to three O2- atoms. There are a spread of N–O bond distances ranging from 1.23–1.37 Å. H1+ is bonded in a single-bond geometry to one Zn2+ atom. There are three inequivalent O2- sites. In the first O2- site, O2- is bonded in a bent 120 degrees geometry to one Zn2+ and one N1- atom. In the second O2- site, O2- is bonded in a single-bond geometry to one N1- atom. In the third O2- site, O2- is bonded in a single-bond geometry to one N1- atom.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Role of Local Structure in the Enhanced Dynamics of Deformed Glasses

External stress can accelerate molecular mobility of amorphous solids by several orders of magnitude. The changes in mobility are commonly interpreted through the Eyring model, which invokes an empirical activation volume. Here, we analyze constant-stress molecular dynamics simulations and propose a structure-dependent Eyring model, connecting activation volume to a machine-learned field, softness. We show that stress has a heterogeneous effect on the mobility that depends on local structure through softness. The barrier impeding relaxation reduces more for well-packed particles, which explains the narrower distribution of relaxation time observed under stress.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Elucidating the water–anatase TiO 2 (101) interface structure using infrared signatures and molecular dynamics

The structure and dynamics of water on solid surfaces critically affect the chemistry of materials in ambient and aqueous environments. Here, we investigate the hydrogen bonding network of water adsorbed on the majority (101) surface of anatase TiO 2 , a widely used photocatalyst, using polarization- and azimuth-resolved infrared spectroscopy combined with neural network potential molecular dynamics simulations. Our results show that one monolayer of water saturates the undercoordinated titanium (Ti 5c ) sites, forming one-dimensional chains of molecule hydrogen bonded to surface undercoordinated bridging oxygen (O 2c ) atoms. As the coverage increases, water adsorption on O 2c sites leads to significant restructuring of the water monolayer and the formation of a two-dimensional hydrogen bond network characterized by tightly bound pairs of water molecules on adjacent Ti 5c and O 2c sites. This structural motif likely persists at ambient conditions, influencing the reactions occurring there. In conclusion, the results reported here provide critical details of the structure of the water–anatase (101) interface that were previously hypothesized but unconfirmed experimentally.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Materials Data on H5ClO6 by Materials Project

H5O2ClO4 crystallizes in the orthorhombic P2_12_12_1 space group. The structure is zero-dimensional and consists of four molecular hydrogen;dihydrate molecules and four ClO4 clusters. In each ClO4 cluster, there are three inequivalent O sites. In the first O site, O is bonded in a single-bond geometry to one Cl atom. The O–Cl bond length is 1.47 Å. In the second O site, O is bonded in a single-bond geometry to one Cl atom. The O–Cl bond length is 1.45 Å. In the third O site, O is bonded in a single-bond geometry to one Cl atom. The O–Cl bond length is 1.46 Å. Cl is bonded in a tetrahedral geometry to four O atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Elucidating molecular level interfacial interactions between a de novo protein and nucleated calcite with solid-state NMR

Biomineralization is the process by which organisms use biomolecules to produce hierarchically structured organic–inorganic composites. Using biology as inspiration, a protein construct (FD31) was previously designed to accelerate formation of nano-calcite with an unconventional {110} face. Here, to understand the molecular interactions essential for protein aided calcite nucleation, solid-state nuclear magnetic resonance (ssNMR) spectroscopy was used in this work to characterize the FD31–calcite interface at the atomic level. Glutamic acid side chains designed to interact directly with calcium ions on the surface were found to have dynamics on the sub-millisecond timescale, indicating possible interactions between the protein and surface waters that were not included in the original model. Dipolar ssNMR recoupling techniques also showed that the protein backbone is ∼2 Å closer to the surface than in the original docking model. Refined molecular simulations were done in the presence of explicit waters, which resulted in the protein backbone closer to the surface than in the original docking structure, providing better agreement with experiment and highlighting the important role played by water in FD31–calcite interactions. While this work provides the first experimental confirmation that FD31 interactions with calcite are localized to the surface of the protein designed to serve as a template, these studies do indicate a more dynamic binding and closer binding mode between FD31 and the nucleated surface than originally proposed. In all, this enhanced molecular insight into the FD31–calcite interface has advanced our fundamental understanding of the atomic interactions at the organic–inorganic interface and will aid in the design of biological templates for the nucleation of inorganic crystals.

Close, Emily G. S. [Pacific Northwest National Lab↗