Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ANTIMONY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

STRUCTURE AND PROPERTIES STUDY ON ENERGY MATERIALS: THERMOELECTRIC MATERIAL TETRAHEDRITE AND LITHIUM ION CONDUCTOR LiPON

Development of efficient energy materials is critical in order to ease the energy demand and reduce our dependence of fossil fuel. Thermoelectric materials are promising due to their capability of generating electrical power by recovering waste heat. The performance of thermoelectric materials is quantified by a dimensionless figure of merit zT, which depends on their properties such as electrical conductivity, Seebeck coefficient and thermal conductivity. Tetrahedrites, a copper antimony sulfosalt mineral, typified by Cu12-xMxSb4S13, where M is a transition metal element such as Ni, Zn, Fe or Mn, have great potential for thermoelectric application due to their relatively high zT (close to 1 at 700 K), earth-abundance, environmental friendliness, favorable electrical properties, and most importantly intrinsic low lattice thermal conductivity (less than 1 W m-1 K-1) in wide temperature. In addition to energy recovery, reliable energy storage devices are also emerging to relieve the energy demand and improve the efficiency of consuming energy resources. Lithium-ion batteries are known to be reliable and successful electrochemical energy storage devices and appliable in various aspects, including laptops, smartphones and electrical vehicles. Lithium phosphorous oxynitride (LiPON) are widely used as thin-film solid-state electrolytes in Li-ion battery, which is the only demonstrated solid-state electrolyte that is quite stable in direct contact with Li metal at potentials from 0-5 V. However, the structure of LiPON, the effects of N doping, and the origin of its good electrochemical stability remains inconclusive.In this thesis, reliable modeling techniques accompanied with experimental tools, are applied to study the thermoelectric material tetrahedrite and the ionic conductor LiPON, in order to study their structural and dynamical properties. Accurate and efficient density-functional theory (DFT) and density-functional tight-binding (DFTB) methods, combined with molecular dynamics (MD) simulations are utilized in order to investigate the structures and properties of these energy materials. The incoherent and coherent atomic dynamics study of tetrahedrite Cu10.5NiZn0.5Sb4S13 provides the origin of softening upon cooling by investigate the motion of Cu12e at different temperatures. The dynamic structure factors in the longitudinal and transverse direction will also be discussed. The Cu movement of Cu-rich tetrahedrite Cu14Sb4S13 is revealed by Cu self-diffusivity, nuclear density map and "nudged elastic band" (NEB). Moreover, we investigate the effect of simulation cell size and basis sets on the DFT-based MD simulation results using tetrahedrite Cu10Zn2Sb4S13 thermoelectric as a model material, showing the advantage of larger cell by accessing smaller Q range. In addition, the low-temperature structural properties of Cu12Sb4S13 is measured by neutron diffraction, which indicates that no cubic to tetragonal transition occurs at metal-semiconductor transition (MST) temperature. Thermoelectric properties such as Seebeck coefficient, electrical resistivity and electrical thermal conductivity will also be investigated. DFTB method is implemented to study the structure and transport properties of Li3PO4 and LiPON, while the exploration of N doping effect is included. Lastly, the LiPON/Li interphase will be revealed in order to study the origin of electrochemical stability

25 ENERGY STORAGE↗

Process for making manganese dioxide and its polymorphs reversible

A method of forming a layered manganese dioxide for use in a cathode of a battery comprises disposing a cathode into a housing of an electrochemical cell, disposing an anode into the housing, disposing a polymeric separator between the anode and the cathode such that the anode and the cathode are electrically separated, adding an alkaline electrolyte to the housing, cycling the electrochemical cell into the 2nd electron capacity of the manganese dioxide, and forming a layered manganese dioxide having a layered manganese dioxide structure with the one or more additives incorporated into the layered manganese dioxide structure. The cathode comprising a cathode material comprising: a manganese dioxide compound, one or more additives selected from the group consisting of bismuth, copper, tin, lead, silver, cobalt, nickel, magnesium, aluminum, potassium, lithium, calcium, gold, antimony, iron, zinc, and combinations thereof, and a conductive carbon.

Yadav, Gautam G.↗

Stabilized copper selenide thermoelectric materials and methods of fabrication thereof

A thermoelectric composition is provided that includes a nanocomposite comprising a copper selenide (Cu 2 Se) matrix having a plurality of nanoinclusions comprising copper metal selenide (CuMSe 2 ) distributed therein. M may be selected from the group consisting of: indium (In), aluminum (Al), gallium (Ga), antimony (Sb), bismuth (Bi), and combinations thereof. The thermoelectric composition has an average figure of merit (ZT) of greater than or equal to about 1.5 at a temperature of less than or equal to about 850K (about 577° C.). Methods of making such a thermoelectric nanocomposite material by a sequential solid-state transformation of a CuSe2 precursor are also provided.

Poudeu-Poudeu, Pierre Ferdinand↗

Zintl compounds with high thermoelectric performance and methods of manufacture thereof

Systems and methods discussed herein relate to Zintl-type thermoelectric materials, including a p-type thermoelectric material according to the formula AM y X y , and includes at least one of calcium (Ca), europium (Eu), ytterbium (Yb), and strontium (Sr), and has a ZT of the above about 0.60 above 675K. The n-type thermoelectric component includes magnesium (Mg), tellurium (Te), antimony (Sb), and bismuth (Bi) according to the formula Mg 3.2 Sb 1.3 Bi 0.5-x Te x that has an average ZT above 0.8 from 400K to 800K. The p-type and n-type materials discussed herein may be used alone, in combination with other materials, or in combination with each other in various configurations.

30 DIRECT ENERGY CONVERSION↗

Ionically conductive powders and films, and methods of preparation

A solid ionically conductive composition (e.g., nanoparticles of less than 1 micron or a continuous film) comprising at least one element selected from alkali metal, alkaline earth metal, aluminum, zinc, copper, and silver in combination with at least two elements selected from oxygen, sulfur, silicon, phosphorus, nitrogen, boron, gallium, indium, tin, germanium, arsenic, antimony, bismuth, transition metals, and lanthanides. Also described is a battery comprising an anode, a cathode, and a solid electrolyte (corresponding to the above ionically conductive composition) in contact with or as part of the anode and/or cathode. Further described is a thermal (e.g., plasma-based) method of producing the ionically conductive composition. Further described is a method for using an additive manufacturing (AM) process to produce an object constructed of the ionically conductive composition by use of particles of the ionically conductive composition as a feed material in the AM process.

Kercher, Andrew K.↗

Post-irradiation 1600°C Heating Test of AGR-1 UCO Fuel Kernels

Five bare kernels were selected from the U.S. Advanced Gas Reactor (AGR) 1 irradiation experiment Compact 5-3-1 to perform post-irradiation safety tests. The safety test involved heating the kernels in the Fuel Accident Condition Simulator (FACS) furnace in the inert atmosphere to a peak temperature of 1600°C and isothermally holding at this temperature for about 47 hours while collecting fission products released. This test was to assess the retention of fission products in bare kernels without the effects of the other TRISO layers (buffer, IPyC, SiC, and OPyC) or the graphitic matrix material. The bare kernels released nearly 100% of cesium and antimony, while they were able to maintain about 30% of europium, 50% of strontium, and the majority of cerium and ruthenium. In addition, about 48% of the calculated inventory of Kr-85 released during the test, indicating that kernels were capable of retaining a considerable fraction of fission gas K-85 during irradiation.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Composite solid oxide fuel cell anode based on ceria and strontium titanate

An anode and method of making the same wherein the anode consists of two separate phases, one consisting of a doped strontium titanate phase and one consisting of a doped cerium oxide phase. The strontium titanate phase consists of Sr.sub.1-xM.sub.xTiO.sub.3-.delta., where M is either yttrium (Y), scandium (Sc), or lanthanum (La), where "x" may vary typically from about 0.01 to about 0.5, and where .delta. is indicative of some degree of oxygen non-stoichiometry. A small quantity of cerium may also substitute for titanium in the strontium titanate lattice. The cerium oxide consists of N.sub.yCe.sub.1-yO.sub.2-.delta., where N is either niobium (Nb), vanadium (V), antimony (Sb) or tantalum (Ta) and where "y" may vary typically from about 0.001 to about 0.1 and wherein the ratio of Ti in said first phase to the sum of Ce and N in the second phase is between about 0.2 to about 0.75. Small quantities of strontium, yttrium, and/or lanthanum may additionally substitute into the cerium oxide lattice. The combination of these two phases results in better performance than either phase used separately as an anode for solid oxide fuel cell or other electrochemical device.

Marina, Olga A↗

High capacity adsorption media and method of producing

A method of producing an adsorption medium to remove at least one constituent from a feed stream. The method comprises dissolving at least one metal compound in a solvent to form a metal solution, dissolving polyacrylonitrile into the metal solution to form a PAN-metal solution, and depositing the PAN-metal solution into a quenching bath to produce the adsorption medium. The at least one constituent, such as arsenic, selenium, or antimony, is removed from the feed stream by passing the feed stream through the adsorption medium. An adsorption medium having an increased metal loading and increased capacity for arresting the at least one constituent to be removed is also disclosed. The adsorption medium includes a polyacrylonitrile matrix and at least one metal hydroxide incorporated into the polyacrylonitrile matrix.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quenching of the SnSbTe Cycle in the rp Process

The nuclides {sup 104-108}Sn, {sup 106-110}Sb, {sup 108,109}Te, and {sup 111}I at the expected endpoint of the astrophysical rp process have been produced in {sup 58}Ni+{sup nat}Ni fusion-evaporation reactions at IGISOL and their mass values were precisely measured with the JYFLTRAP Penning trap mass spectrometer. For {sup 106}Sb, {sup 108}Sb, and {sup 110}Sb these are the first direct experimental mass results obtained. The related one-proton separation energies have been derived and the value for {sup 106}Sb, S{sub p}=424(8) keV, shows that the branching into the closed SnSbTe cycle in the astrophysical rp process is weaker than expected.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Structure, magnetic and electrical properties of CeIrSb and its hydride CeIrSbH{sub 0.8}

The ternary antimonide CeIrSb absorbs hydrogen under moderate temperature and pressure conditions (4 MPa and 573 K), leading to the hydride CeIrSbH{sub 0.8}. The crystal structures of both compounds have been investigated by X-ray diffraction on powders and single crystals: TiNiSi type, space group Pnma, a=735.07(7), b=456.93(4), c=792.8(1) pm, R1/wR2=0.0206/0.0395, 601 F{sup 2} values for CeIrSb and a=728.16(14), b=460.35(6), c=825.87(2) pm, R1/wR2=0.0322/0.0735, 528 F{sup 2} values for CeIrSbH{sub 0.8} with 20 variables per refinement. Hydrogenation induces both an increase of the cell volume V (+4%) and a strongly anisotropic expansion of the unit cell with a maximum of 4.3% in the c direction, leading to a significant increase of the Ce-Ir and Ce-Ce distances in this direction. The H-insertion into CeIrSb leads to a magnetic transition from intermediate valence to antiferromagnetic behavior (T{sub N}=7.0 K) evidenced by magnetization, electrical resistivity and specific heat measurements. This transition can be explained on the basis of the Doniach diagram considering the J{sub cf} interaction between the 4f(Ce) and conduction electrons. - Graphical Abstract: Cerium coordination in CeIrSb and CeIrSbH{sub 0.8}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improved Cumulative Fission Yield Measurements with Fission Spectrum Neutrons on 235 U

Two isotopically-characterized targets of high-purity (99.84±0.03%) 235 U-oxide and a neutron dosimetry package were exposed to a pulsed neutron irradiation using the Godiva critical assembly at the National Criticality Experiments Research Center. Following irradiation, the fissioned targets were counted with a broad-energy germanium detector. Estimates of the total fissions for each target were made using measurements of well-known fission products. The total fission values were then used to measure the fission yields of 21 fission products with half-lives between 636 and 119,700 seconds. Mean values of seventeen of the measured fission products fell within the 95% confidence level of the Evaluated Nuclear Data Files VII.1/b (ENDF/B-VII.1) using the larger of the two uncertainties: 84g Br, 89 Rb, 91 Sr, 93 Y, 97 Zr, 101 Mo, 105 Ru, 128 Sn, 129 Sb, 130g Sb, 131 Sb, 131m Te, 133 I, 135 I, 141 Ba, 142 Ba, and 142 La. Seven isotopes were measured to better precision than is listed in the ENDF/B-VII.1 database: 89 Rb, 93 Y, 128 Sn, 129 Sb, 130g Sb, 131m Te, and 133 I. Four of the measured isotopes were found to be statistically different from the ENDF/B-VII.1 database: 94 Y, 134 Te, 134 I, and 138 Xe. Two of the isotopic analyses conducted in this paper fit the parent and daughter data simultaneously. The parent-daughter pairs measured in this way were the 134 Te/I and 142 Ba/La pairs. The fission yield results obtained in this way are unique, especially for 134 I, because the parent and daughter half-lives are so close. Here, given the limited number of direct measurements of the 134 Te/I pair from fast neutron induced fission and the seemingly high estimate for 134 Te from previous work, it is likely that the value in this paper is more accurate; however, additional measurements of this pair are needed to validate this assertion.

42 ENGINEERING↗

On the alpha decay of {sup 109}I and its implications for the proton decay of {sup 105}Sb

In an experiment at the Recoil Mass Spectrometer at the Holifield Radioactive Ion Beam Facility, the very small {alpha}-decay branch of {sup 109}I, b{sub {alpha}} = (1.4{+-}0.4){center_dot}10{sup -4}, has been measured. The Q{sub {alpha}}-value for this transition allowed for the determination of Q{sub p}({sup 105}Sb) = 356{+-}22 keV, about 130 keV lower than previously claimed. This difference increases the partial half-life for proton decay by several orders of magnitude, making the probability of observing direct proton decay of {sup 105}Sb very small, much below any previous experimental limit. The results and consequences for the astrophysical rp-process are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effects of oxygen incorporation in GeSbTe films on electrical properties and thermal stability

Oxygen incorporated Ge{sub 2}Sb{sub 2}Te{sub 5} (GST) films were prepared by an ion beam sputtering deposition method. I-V curves of the oxygen incorporated GST active layer showed that the threshold voltage (V{sub th}) varied, depending on the level of incorporated oxygen. In the case of a GST film with an elevated oxygen content of 30.8%, the GST layer melted at 9.02 V due to the instability conferred by the high oxygen content. The formation of Ge-deficient hexagonal phases such as GeSb{sub 2}Te{sub 4} and Sb{sub 2}Te{sub 3} appear to be responsible for the V{sub th} variation. Impedance analyses indicated that the resistance in GST films with oxygen contents of 16.7% and 21.7% had different origins. Thermal desorption spectroscopy data indicate that moisture and hydrocarbons were more readily desorbed at higher oxygen content because the oxygen incorporated GST films are more hydrophilic than undoped GST films.

36 MATERIALS SCIENCE↗

Structure of the isomeric states in {sup 123,125}Sb

Excited states in {sup 123,125}Sb have been studied following the {sup 122,124}Sn({sup 7}Li,{alpha}2n){sup 123,125}Sb reactions at beam energies of 35 and 37 MeV, respectively. Conversion coefficients for transitions depopulating isomeric states in {sup 125}Sb have been measured using an electron spectrometer. This has allowed firm J{sup {pi}} assignments to be made and enabled the structure of the isomeric states to be compared with those in {sup 121,127-131}Sb and in the neighboring even-A tin isotopes. The half-lives of the J{sup {pi}}=(23/2){sup +} isomeric states in {sup 123}Sb and {sup 125}Sb have been measured to be 66(4) {mu}s and 272(16) ns, respectively. The half-lives of the J{sup {pi}}=(19/2){sup +},(19/2){sup -}, and (15/2){sup -} states in {sup 125}Sb have been measured as 31(2) ns, 28.0(7) {mu}s, and 4.1(2) {mu}s, respectively. The transition probabilities for the transitions depopulating these states are compared with those in {sup 121,127-131}Sb and with the results of shell-model calculations using the Oxbash code and the SN100PN interaction in a restricted model space.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The reaction mechanism of SnSb and Sb thin film anodes for Na-ion batteries studied by X-ray diffraction, 119 Sn and 121 Sb Mössbauer spectroscopies

The electrochemical reaction of Sb and SnSb anode materials with Na results in the formation of amorphous materials. To understand the resulting phases and electrochemical capacities we studied the reaction products local order using 119 Sn and 121 Sb Mössbauer spectroscopies in conjunction with measurements performed on model powder compounds of Na-Sn and Na-Sb to further clarify the reactions steps. For pure Sb the discharge (sodiation) starts with the formation of an amorphous phase composed of atomic environments similar to those found in NaSb, and proceeds further by the formation of environments similar to that present in Na 3 Sb. The reversible reaction takes place during a large portion of the charge process. At full charge the anode material still contains a substantial fraction of Na, which explains the lack of recrystallization into crystalline Sb. The reaction of SnSb yields Na 3 Sb crystalline phase at full discharge at higher temperatures (65 and 95°C) while the room temperature reaction yields amorphous compounds. The electrochemically-driven, solid-state amorphization reaction occurring at room temperature is governed by the simultaneous formation of Na-coordinated Sn and Sb environments, as monitored by the decrease (increase) of the 119 Sn ( 121 Sb) Mössbauer isomer shifts. Overall, the monitoring of the hyperfine parameters enables to correlate the changes in Na content to the individual Sn and Sb local chemical environments.

25 ENERGY STORAGE↗

Low-temperature single crystal X-ray diffraction and high-pressure Raman studies on [(CH{sub 3}){sub 2}NH{sub 2}]{sub 2}[SbCl{sub 5}]

The structure of bis(dimethylammonium) pentachloroantimonate(III), [(CH{sub 3}){sub 2}NH{sub 2}]{sub 2}[SbCl{sub 5}], BDP, was studied at 15 K and ambient pressure by single-crystal X-ray diffraction as well as at ambient temperature and high pressures up to 4.87(5) GPa by Raman spectroscopy. BDP crystallizes in the orthorhombic Pnma space group with a=8.4069(4), b=11.7973(7), c=14.8496(7) A, and Z=4; R{sub 1}=0.0381, wR{sub 2}=0.0764. The structure consists of distorted [SbCl{sub 6}]{sup 3-} octahedra forming zig-zag [{l_brace}SbCl{sub 5}{r_brace}{sub n}]{sup 2n-} chains that are cross-linked by dimethylammonium [(CH{sub 3}){sub 2}NH{sub 2}]{sup +} cations. The organic and inorganic substructures are bound together by the N-H...Cl hydrogen bonds. The distortions of [SbCl{sub 6}]{sup 3-} units increase, partly due to the influence of the hydrogen bonds which became stronger, with decreasing temperature. The preliminary room temperature, high-pressure X-ray diffraction experiments suggest that BDP undergoes a first-order phase transition below ca. 0.44(5) GPa that destroys single-crystal samples. The transition is accompanied by changes in the intensities and positions of the Raman lines below 400 cm{sup -1}. - Graphical abstract: On cooling to 15 K [(CH{sub 3}){sub 2}NH{sub 2}]{sub 2}[SbCl{sub 5}] shows significant changes in the geometries of the longest Sb-Cl bonds that are correlated with the changes in the geometry of the N-H...Cl hydrogen bonds. Applying of quite modest pressures far exceed observed temperature-induced changes-[(CH{sub 3}){sub 2}NH{sub 2}]{sub 2}[SbCl{sub 5}] undergoes a first-order phase transition below ca. 0.44(5) GPa that destroys single-crystal samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rapid solid-state synthesis of binary group 15 chalcogenides using microwave irradiation

Solid-state microwave synthesis was found to provide a simple, rapid and economical route to prepare Sb{sub 2}Se{sub 3}, Sb{sub 2}Te{sub 3}, Bi{sub 2}Se{sub 3} and Bi{sub 2}Te{sub 3}. These technologically important materials were prepared via solid-state microwave synthesis in as little as 4 min. Through the process of finding the ideal synthetic conditions with which to produce each of these compounds, the effects that several synthetic variables have on the reaction outcomes were explored. Scanning electron microscopy, energy dispersive spectroscopy, powder X-ray diffraction, differential thermal analysis and diffuse reflectance measurements, when appropriate, were used to characterize the materials. - Graphical abstract: Solid-state microwave synthesis offers a fast, economical and green route for the preparation of Sb{sub 2}Se{sub 3}, Sb{sub 2}Te{sub 3}, Bi{sub 2}Se{sub 3} and Bi{sub 2}Te{sub 3} (shown in graphic) in only 4 min. Through the process of preparing these materials in pure form, the effects that several reaction variables, including sample quantity, irradiation time and sample geometry, have on the outcome of the reactions were documented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase segregation in mixed Nb-Sb double perovskites Ba{sub 2}LnNb{sub 1-x}Sb{sub x}O{sub 6}

The phase composition of two series of mixed Nb{sup 5+}-Sb{sup 5+} double perovskites formed between the pairs Ba{sub 2}EuNbO{sub 6}-Ba{sub 2}PrSbO{sub 6} and Ba{sub 2}NdSbO{sub 6}-Ba{sub 2}NdNbO{sub 6} have been studied using synchrotron X-ray powder diffraction methods. In both series extensive phase segregation is observed demonstrating limited solubility of Sb{sup 5+} in these Nb{sup 5+} perovskites, irrespective of the precise structures of the double perovskite. Evidence for a monoclinic I2/m phase in the series formed between tetragonal I4/m Ba{sub 2}EuNbO{sub 6} and rhombohedral R3-bar Ba{sub 2}EuNbO{sub 6} is presented. It is postulated that this phase segregation is a consequence of competing bonding requirements of the Nb{sup 5+} and Sb{sup 5+} cations associated with their electronic configurations. - Graphical abstract: The incompatibility of Sb and Nb in single-phase perovskites is explored for two families of oxides, namely Ba{sub 2}EuNbO{sub 6}-Ba{sub 2}PrSbO{sub 6} and Ba{sub 2}NdSbO{sub 6}-Ba{sub 2}NdNbO{sub 6}. Limited solubility of Sb{sup 5+} in these Nb{sup 5+} perovskites is observed, irrespective of their precise structure. This is apparently a consequence of competing bonding requirements of the Nb{sup 5+} and Sb{sup 5+} cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗