Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Synthesis of Ag{sub 9}(SiO{sub 4}){sub 2}NO{sub 3} through a reactive flux method and its visible-light photocatalytic performances

Ag{sub 9}(SiO{sub 4}){sub 2}NO{sub 3} was prepared by a reactive flux method. The structures, morphologies, and light absorption properties were investigated. Owing to the polar crystal structure, an internal electric field can be formed inside the material, which can facilitate the photogenerated charge separation during the photocatalytic process. Based on both the wide light absorption spectra and high charge separation efficiency originated from the polarized internal electric field, Ag{sub 9}(SiO{sub 4}){sub 2}NO{sub 3} exhibit higher efficiency over Ag{sub 3}PO{sub 4} during the degradation of organic dyes under visible light irradiation, which is expected to be a potential material for solar energy harvest and conversion.

36 MATERIALS SCIENCE↗

Double-shelled plasmonic Ag-TiO{sub 2} hollow spheres toward visible light-active photocatalytic conversion of CO{sub 2} into solar fuel

Double-shelled hollow hybrid spheres consisting of plasmonic Ag and TiO{sub 2} nanoparticles were successfully synthesized through a simple reaction process. The analysis reveals that Ag nanoparticles were dispersed uniformly in the TiO{sub 2} nanoparticle shell. The plasmonic Ag-TiO{sub 2} hollow sphere proves to greatly enhance the photocatalytic activity toward reduction of CO{sub 2} into renewable hydrocarbon fuel (CH{sub 4}) in the presence of water vapor under visible-light irradiation. The possible formation mechanism of the hollow sphere and related plasmon-enhanced photocatalytic performance were also briefly discussed.

36 MATERIALS SCIENCE↗

Ag doped silicon nitride nanocomposites for embedded plasmonics

The localized surface plasmon-polariton resonance (LSPR) of noble metal nanoparticles (NPs) is widely exploited for enhanced optical spectroscopies of molecules, nonlinear optics, photothermal therapy, photovoltaics, or more recently in plasmoelectronics and photocatalysis. The LSPR frequency depends not only of the noble metal NP material, shape, and size but also of its environment, i.e., of the embedding matrix. In this paper, Ag-NPs have been fabricated by low energy ion beam synthesis in silicon nitride (SiN{sub x}) matrices. By coupling the high refractive index of SiN{sub x} to the relevant choice of dielectric thickness in a SiN{sub x}/Si bilayer for an optimum antireflective effect, a very sharp plasmonic optical interference is obtained in mid-range of the visible spectrum (2.6 eV). The diffusion barrier property of the host SiN{sub x} matrix allows for the introduction of a high amount of Ag and the formation of a high density of Ag-NPs that nucleate during the implantation process. Under specific implantation conditions, in-plane self-organization effects are obtained in this matrix that could be the result of a metastable coarsening regime.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photoconductivities from band states and a dissipative electron dynamics: Si(111) without and with adsorbed Ag clusters

A new general computational procedure is presented to obtain photoconductivities starting from atomic structures, combining ab initio electronic energy band states with populations from density matrix theory, and implemented for a specific set of materials based on Si crystalline slabs and their nanostructured surfaces without and with adsorbed Ag clusters. The procedure accounts for charge mobility in semiconductors in photoexcited states, and specifically electron and hole photomobilities at Si(111) surfaces with and without adsorbed Ag clusters using ab initio energy bands and orbitals generated from a generalized gradient functional, however with excited energy levels modified to provide correct bandgaps. Photoexcited state populations for each band and carrier type were generated using steady state solution of a reduced density matrix which includes dissipative medium effects. The present calculations provide photoexcited electronic populations and photoinduced mobilities resulting from applied electric fields and obtained from the change of driven electron energies with their electronic momentum. Extensive results for Si slabs with 8 layers, without and with adsorbed Ag clusters, show that the metal adsorbates lead to substantial increases in the photomobility and photoconductivity of electrons and holes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced plasmon radiative intensity from Ag nanoparticles coupled to a graphene sheet

A hybrid structure composed of Ag nanoparticles and graphene sheets has been synthesized by one-pot co-reduction process at room temperature. Compared to the isolated Ag nanoparticles, the presence of graphene enhanced the photoluminescence originating from the plasmon radiative decay of Ag nanoparticles as results of the charge injection and the near-field confinement resulting from the coupled graphene sheets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A perfect wetting of Mg monolayer on Ag(111) under atomic scale investigation: First principles calculations, scanning tunneling microscopy, and Auger spectroscopy

First principles calculations, scanning tunneling microscopy, and Auger spectroscopy experiments of the adsorption of Mg on Ag(111) substrate are conducted. This detailed study reveals that an atomic scale controlled deposition of a metallic Mg monolayer perfectly wets the silver substrate without any alloy formation at the interface at room temperature. A liquid-like behavior of the Mg species on the Ag substrate is highlighted as no dot formation is observed when coverage increases. Finally a layer-by-layer growth mode of Mg on Ag(111) can be predicted, thanks to density functional theory calculations as observed experimentally.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A DFT investigation of the adsorption of iodine compounds and water in H-, Na-, Ag-, and Cu- mordenite

The potential use of some cation-exchanged mordenite (H{sup +}, Na{sup +}, Cu{sup +}, and Ag{sup +}) as a selective adsorbent for volatile iodine species (ICH{sub 3} and I{sub 2}), which can be released during a nuclear accident together with a steam carrier gas, is investigated using density functional theory. It is found that in the case of Cu-MOR and Ag-MOR, the absolute values of interaction energies of ICH{sub 3} and I{sub 2} are higher than that of water which indicates that these forms of zeolite could be suitable for selective adsorption of iodine species. In contrast, the H-MOR and Na-MOR are found to be unsuitable for this purpose. A systematic investigation of all adsorption sites allowed us to analyze the structural effects affecting the adsorption behavior. For the Ag-MOR and Cu-MOR zeolites, the iodine compounds are adsorbed preferentially in the large channel of mordenite (main channel) while water prefers the small channel or the side pocket where it forms stronger hydrogen bonds. The factors governing the interaction energies between the cationic sites and the different molecules are analyzed and the important role of van der Waals interactions in these systems is highlighted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of electrode material on characteristics of non-volatile resistive memory consisting of Ag{sub 2}S nanoparticles

In this study, Ag{sub 2}S nanoparticles are synthesized and used as the active material for two-terminal resistance switching memory devices. Sintered Ag{sub 2}S films are successfully crystallized on plastic substrates with synthesized Ag{sub 2}S nanoparticles, after a relatively low-temperature sintering process (200 °C). After the sintering process, the crystallite size is increased from 6.8 nm to 80.3 nm. The high ratio of surface atoms to inner atoms of nanoparticles reduces the melting point temperature, deciding the sintering process temperature. In order to investigate the resistance switching characteristics, metal/Ag{sub 2}S/metal structures are fabricated and tested. The effect of the electrode material on the non-volatile resistive memory characteristics is studied. The bottom electrochemically inert materials, such as Au and Pt, were critical for maintaining stable memory characteristics. By using Au and Pt inert bottom electrodes, we are able to significantly improve the memory endurance and retention to more than 10{sup 3} cycles and 10{sup 4} sec, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Theoretical investigation of geometries, stabilities, electronic and optical properties for advanced Ag{sub n}@(ZnO){sub 42} (n=6-18) hetero-nanostructure

The structural properties of Ag{sub n}@(ZnO){sub 42} (n=6-18) core-shell nanoparticles have been investigated by the first principles calculations, and the core-shell nanostructure with n=13 is proved to be the most stable one for the first time. Ag{sub 13}@(ZnO){sub 42} core-shell nanostructure possesses higher chemistry activity and shows a red shift phenomenon in the light of the absorption spectrum compare to the (ZnO){sub 48}, this can be confirmed by the calculated electron structure. The visible-light could be absorbed by Ag{sub 13}@(ZnO){sub 42} to improve the photo-catalysis of (ZnO){sub 48} nanostructure. Our results show good agreement with experiments.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Obtaining the solid-liquid interfacial free energy via multi-scheme thermodynamic integration: Ag-ethylene glycol interfaces

The solid-liquid interfacial free energy γ sl is an important quantity in wetting, nucleation, and crystal growth. Although various methods have been developed to calculate γ sl with atomic-scale simulations, such calculations still remain challenging for multi-component interfaces between molecular fluids and solids. In this paper, we present a multi-scheme thermodynamic integration method that is inspired by the “cleaving-wall” method and aimed at obtaining γ sl for such systems using open-source simulation packages. This method advances two aspects of its predecessor methods. First, we incorporate separate schemes to resolve difficulties when manipulating periodic boundary conditions of the supercell using open-source simulation packages. Second, we introduce a numerical approximation to obtain thermodynamic integrands for complex force fields when an analytical differentiation is not readily available. To demonstrate this method, we obtain γ sl for interfaces between Ag(100) and Ag(111) and ethylene glycol (EG). These interfacial free energies mirror interfacial potential energies for each facet. We also estimate entropies of interface formation and these are consistent with theoretical predictions in signs and trends. For the Ag-EG systems, we find that the largest contribution to γ sl is the free energy to create the bare metal surfaces. The second-largest contribution to γ sl is from the liquid-solid interaction. Finally, this user-friendly method will accelerate investigation in a broad range of research topics, such as the thermodynamic effect of structure-directing agents in solution-phase shape-controlled nanocrystal syntheses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High spin polarization in epitaxial Fe 4 N thin films using Cr and Ag as buffer layers

Fe 4 N thin films with (001) texture were prepared by reactive sputtering on MgO substrates, utilizing either a Cr or Ag buffer layer to facilitate the epitaxial growth. X-ray diffraction, atomic force microscopy, and vibrating sample magnetometry measurements show that the Fe 4 N thin film grown on the Ag buffer layer is superior to that grown on the Cr buffer layer. The point contact Andreev reflection measurement was then conducted, and the spin polarizations were determined to be 61.1% and 81.3% for Fe 4 N thin films with Cr and Ag buffer layers, respectively. The 81.3% spin polarization is significantly higher than the ratio reported previously for Fe 4 N and is comparable with that of state-of-the-art Heusler alloys. This result is in agreement with the theoretical prediction on the discrepancy between the two differently defined spin polarizations for Fe 4 N. Moreover, our study indicates that an optimized growth process for Fe 4 N thin films is crucial for achieving a high spin polarization and that true half-metallicity could potentially be realized with Fe 4 N. Furthermore the high spin polarization of Fe 4 N combined with its low fabrication temperature and simple composition makes Fe 4 N a competitive candidate to be a half-metallic ferromagnet in spintronic devices.

36 MATERIALS SCIENCE↗

Assessing the roles of Cu- and Ag-deficient layers in chalcopyrite-based solar cells through first principles calculations

Chalcopyrites are a demonstrated material platform for realizing efficient thin-film photovoltaics, with the most well known Cu(In,Ga)Se 2 (CIGS)-based solar cells exceeding 23%. Several factors, including flexibility in tuning the absorber bandgap, enhanced surface treatments, and the electrically benign nature of common defects are responsible for the existing high performance and future promise in chalcopyrite-based photovoltaic devices. The introduction of Cu-poor phases (also known as ordered-vacancy compounds or OVCs) between the absorber and buffer layers in CIGS solar cells is known to enhance device performance; however, the overall properties and role of OVCs remain poorly understood. Using first principles calculations based on the density functional theory with screened hybrid functionals, here we explore the electronic structure and stability of OVCs and their band offsets with defect-free chalcopyrite layers in Cu- and Ag-based compounds (ABX 2 where A=Cu, Ag; B=In, Ga, Al; and X=S, Se). Using AB 3 X 5 and AB 5 X 8 stoichiometries as model OVC systems, we report on the variation of the bandgap with the A/B ratio and discuss the trends in other Cu- and Ag-based chalcopyrites beyond CuInSe 2 . We find that the valence and conduction bands are lower in energy in OVCs with respect to the parent ABX 2 chalcopyrite owing to a reduced p–d interaction between X and A atoms. We additionally perform device-level simulations to assess the implications of the results, finding that the valence band offsets of OVCs are favorable, while the conduction band offsets of chalcopyrites beyond CuInSe 2 -based absorbers may be detrimental in conventional solar cell device designs.

14 SOLAR ENERGY↗

Optical power limiting in ensembles of colloidal Ag{sub 2}S quantum dots

The effect of power limiting for optical radiation at a wavelength of 660 nm with a pulse duration of 10 ms and operation threshold of 2.2 – 3.1 mJ cm{sup -2} is observed in ensembles of colloidal Ag{sub 2}S quantum dots (QDs). Using the z-scanning method in an open-aperture scheme it is found that the power is limited mainly due to reverse saturable absorption caused by two-photon optical transitions that involve energy levels of Ag{sub 2}S photoluminescence centres, related to structural impurity defects in colloidal Ag{sub 2}S QDs. At the same time, the z-scanning in a closed-aperture scheme demonstrates the formation of a thermal dynamic lens. (nonlinear optical phenomena)

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Surface localisation of laser photoelectron emission using Cu{sub 2}O and Ag film structures

A laser electron source localised on a photocathode surface was developed on the basis of Ag and Cu{sub 2}O thin films sequentially deposited by magnetron sputtering on a glass substrate. Photoemission of electrons under the action of the fourth (263 nm) harmonic of a femtosecond fibre laser was initiated from the surface of an Ag film deposited on the substrate surface. Photoelectron source localisation on the photocathode surface was provided by sputtering the Cu{sub 2}O copper oxide film on its surface, which significantly (about 50 times) reduced the photoemission efficiency, and by subsequent removal of the copper oxide layer in the photoemission spot with a diameter of ∼15 μm by means of focused second-harmonic radiation of a femtosecond fibre laser. In conducting research on the photocathode surface, a grid of photoemission spots was formed, which greatly facilitated the laser beam alignment with the photoemission spot. A decrease in the noises of ultrafast transmission electron microscope, associated with spatial fluctuations of the laser beam initiating pulsed photoelectron emission from the microscope photocathode when using a localised electron source on the basis of a structure of thin Cu{sub 2}O and Ag films, was experimentally demonstrated. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Temperature-dependent thermal expansion of cast and hot-pressed LAST (Pb-Sb-Ag-Te) thermoelectric materials

The thermal expansion for two compositions of cast and hot-pressed LAST (Pb Sb Ag Te) n-type thermoelectric materials has been measured between room temperature and 673K via thermomechanical analysis (TMA). In addition, using high-temperature X-ray diffraction (HT-XRD), the thermal expansion for both cast and hot-pressed LAST materials was determined from the temperature-dependent lattice parameters measured between room temperature and 623 K. The TMA and HT-XRD determined values of the coefficient of thermal expansion (CTE) for the LAST compositions ranged between 20106K1 and 24106K1, which is comparable to the CTE values for other thermoelectric materials including PbTe and Bi2Te3. The CTE of the LAST specimens with a higher Ag content (Ag0.86Pb19Sb1.0Te20) exhibited a higher CTE value than that of the LAST material with a lower Ag content (Ag0.43Pb18Sb1.2Te20). In addition, a peak in the temperature-dependent CTE was observed between room temperature and approximately 450K for both the cast and hot-pressed LAST with the Ag0.86Pb19Sb1.0Te20 composition, whereas the CTE of the Ag0.43Pb18Sb1.2Te20 specimen increased monotonically with temperature.

36 MATERIALS SCIENCE↗

Spin-polarized confined states in Ag films on Fe(110)

Spin- and angle-resolved photoemission spectroscopy of thin Ag(111) films on ferromagnetic Fe(110) shows a series of spin-polarized peaks. These features derive from Ag sp -bands, which form quantum well states and resonances due to confinement by a spin-dependent interface potential barrier. The spin-up states are broader and located at higher binding energy than the corresponding spin-down states at Gamma, although the differences attenuate near the Fermi level. The spin-down states display multiple gap openings, which interrupt their parabolic-like dispersion. As a result, first-principles calculations attribute these findings to the symmetry- and spin-selective hybridization of the Ag states with the exchange-split bands of the substrate.

36 MATERIALS SCIENCE↗

Angle-dependent Study of a Direct Optical Transition in the sp Bands of Ag(111) by One- and Two-photon Photoemission

The research described in this product was performed in part in the Environmental Molecular Sciences Laboratory, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory. We have measured angle-dependent photoemission spectra for one-photon and two-photon excitation from Ag(111). The observed dispersion of the sp-band transition of Ag(111) can be reproduced using a nearly-freeelectron model for the initial and final states involved. The observed dispersion agrees with the known band structure. We illustrate how the strong refraction of low-energy electrons becomes a limiting factor to obtain quantitative band-structure information. Conversely, low-energy electrons of a well-defined direct optical interband transition can provide a sensitive probe of the inner potential. We observe asymmetric two-photon photoelectron intensity distributions with respect to detection along the surface normal. These intensity distributions can be well described by a phenomenological model which employs the Fresnel equations to calculate the electric field components of the incident radiation inside the sample. Very good agreement is found using tabulated optical constants and a momentum matrix element, which is oriented along the surface normal. In contrast, the observed intensity distribution for one-photon photoemission from Ag(111) does not fit the simple Fresnel model. We interpret this as the influence of surface photoemission. By comparison to Cu(001), we show that the expected intensity distributions of the Fresnel model for one-photon photoemission and twophoton photoemission are valid for an orientation of the momentum matrix element along the surface normal if the influence of additional effects like surface photoemission can be neglected.

Environmental Molecular Sciences Laboratory↗

Chiral-like doublet band structure and octupole correlations in 104 Ag

The nature of the yrast negative-parity band and its chiral-like partner band in 104 Ag is investigated experimentally and theoretically. Lifetimes of states in the negative-parity yrast band and positive-parity band based on the 4424-keV level are measured using Doppler shift attenuation technique. Lifetimes of three more states have been determined along with the upper limit for the lifetime of the highest observed yrast states. Further, lifetimes known from earlier studies are determined with better precision. The level scheme of 104 Ag has also been extended with the addition of new enhanced E1 transitions linking the positive-parity band based on the 4424-keV levels and the yrast negative-parity and its partner band. B(E1) and/or B(E1)/B(M1) values for the transitions from the positive-parity band to the yrast and its partner band have been determined for the first time; these suggest strong octupole correlation between the positive-parity and the negative-parity bands. Here, calculations based on the triaxial projected shell model (TPSM) and covariant density functional theory (CDFT) have been performed to unravel the intrinsic structures of the partner band and the excited positive-parity band. TPSM calculations predict that doublet bands have significant angular momentum contributions along the three principle axes, suggesting that bands could have chiral symmetry breaking origin. The CDFT calculations predict a π(g 9/2 ) -1 Ⓧν(h 11/2 )(g 7/2 ,d 5/2 ) 2 aligned quasiparticle configuration for the negative-parity doublet bands with deformation parameters β≈0.20 and γ≈5°. The partner band could be interpreted as a chiral vibration mode built on top of the yrast band. The excited positive-parity band is predicted to have aligned four quasiparticle configurations, namely, π(g 9/2 ) -1 Ⓧν(h 11/2 ) 2 (g 7/2 ,d 5/2 ) 1 . Further, these calculations predict significant octupole softness in 104 Ag which could be the reason for enhanced E1 transitions between the four quasiparticle positive-parity bands and the doublet negative-parity bands.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗