Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ABLATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Guiding of 35 TW laser pulses in ablative capillary discharge waveguides

An ablatively driven capillary discharge plasma waveguide has been used to demonstrate guiding of 30 fs, 35 TW laser pulses over distances up to 3 cm with incident intensity in excess of 4x10{sup 18} W/cm{sup 2}. The plasma density range over which good guiding was observed was 1-3x10{sup 18} cm{sup -3}. The quality of the laser spot at the exit mode was observed to be similar to that at the entrance and the transmitted energy was {approx}25% at input powers of 35 TW. The transmitted laser spectrum typically showed blueshifting due to ionization of carbon and hydrogen atoms in the capillary plasma by the high intensity laser pulse. The low plasma density regime in which these capillaries operate makes these devices attractive for use in single stage electron accelerators to multi-GeV energies driven by petawatt class laser systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Growth modes of ZnO nanostructures from laser ablation

ZnO nanowires (NWs) and other nanostructures were grown by laser ablation of a ZnO containing target onto different substrates with and without the presence of an Au catalyst. The morphology and structure of the NWs were studied using high resolution scanning and transmission electron microscopes [including imaging, selected area electron diffraction (SAED), and energy dispersive x-ray spectroscopy (EDS)]. The different growth modes obtainable could be tuned by varying the Zn concentration in the vapor phase keeping other growth parameters intact. Possible growth mechanisms of these nanowires are suggested and discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Comparison of kinetic theory models of laser ablation of carbon

The paper compares the predictions of three-dimensional kinetic theory models of laser ablation of carbon. All the models are based on the moment solution of the Boltzmann equation for arbitrary strong evaporation but use different approximations. Comparison of the model predictions demonstrated that the choice of the particular model has very little influence on the results. The influence of the heat conduction from the gas to the solid phase was also found to be negligible in this problem.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Generation of multiple stress waves in silica glass in high fluence femtosecond laser ablation

Shadowgraphs of dynamic processes outside and inside transparent target during the intense femtosecond laser ablation of silica glass are recorded. Two material ejections outside the target and two corresponding stress waves inside the target are observed at different energy fluences. In particular, a third stress wave can be observed at energy fluence as high as 40 J/cm{sup 2}. The first wave is a thermoelastic wave, while the second and the third may be generated subsequently by the mechanical expansions. In addition, the magnitudes of the three stress waves decrease sequentially based on our analysis.

36 MATERIALS SCIENCE↗

Time-resolved observation of the plasma induced by laser metal ablation in air at atmospheric pressure

Most of the previous studies on nanosecond (ns) laser-induced plasma typically use relatively short ns laser pulses (pulse duration less than {approx}30 to 50 ns). In this paper, relatively long ns laser pulses with 200 ns duration have been used, and the produced plasma during metal ablation in air at atmospheric pressure has been studied through time-resolved observation using an intensified charge-coupled device camera. Due to the much longer ns laser pulse duration, the plasma radiation intensity distribution and the plasma front propagation have different physical features from those produced by much shorter ns laser pulses. In particular, it has been observed that during the laser pulse the plasma has two high-radiation-intensity regions: one is located right above the target surface while the other is behind the expanding plasma front. The former region will disappear once the laser pulse completes. This interesting physical phenomenon has been rarely reported, and requires further experimental and modeling study to completely understand.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Growth Of Graphitic Polyhedra, SiC Platelets, And Carbon Nanotubes Filled With SiC Nanowires By Laser Ablation

Three characteristic silicon/carbon nanostructures, i.e., graphitic polyhedral (GP) particles, silicon carbide (SiC) platelets, and carbon nanotubes (CNTs) filled with SiC nanowires, were synthesized by the laser ablation of Si-C targets in the presence of high-pressure Ar gas up to 0.9 MPa. The growth of nanostructures was controlled merely by adjusting the Si content in graphite and the ambient Ar gas pressure. Deposits containing GP particles were purified by heat treatment at 550 deg. C in a pure oxygen atmosphere for 1 h. CNTs filled with SiC nanowires were grown without a catalyst. Unlike previous studies of CNTs filled with metals or compounds, all the CNTs checked by transmission electron microscopy contained SiC nanowires and no unfilled CNTs were produced. We discuss the growth mechanisms of the three nanostructures.

36 MATERIALS SCIENCE↗

Femtosecond Laser Ablation of Dielectrics: Experimental Studies of Fundamental Processes

We study experimentally the electronic excitation mechanisms involved in the breakdown and ablation of wide band gap dielectric materials. We use a femtosecond pump-probe interferometry technique to measure the density of carriers which is excited by ultrashort intense laser pulses. In Al{sub 2}O{sub 3}, we observe a density dependent lifetime for electron hole pairs excited by the light pulse, indicating second order or bimolecular recombination kinetics. Then, we use a sequence of two excitation pulses: a first short pulse at 400 nm excites a large density of carriers, and a second one at 800 nm with different pulse duration, namely 50 fs and 10 ps, reaches an excited solid. The intensity of each pulse is kept just below the damage threshold, which is surpassed when both pulses are impinging the sample. We show that the total density of carriers is just the sum of the density excited by the two pulses sent independently. The interpretation of this result leads us to conclude that the second pulse deposit further energy in the material by heating the previously excited carriers, without inducing any electronic excitation itself. This seems to demonstrate that the avalanche process, which is often invoked in the laser breakdown literature, does not play any role in our experimental conditions.

36 MATERIALS SCIENCE↗

Short-pulse Laser Induced Transient Structure Formation and Ablation Studied with Time-resolved Coherent XUV-scattering

The structural dynamics of short-pulse laser irradiated surfaces and nano-structures has been studied with nm spatial and ultrafast temporal resolution by means of single-shot coherent XUV-scattering techniques. The experiments allowed us to time-resolve the formation of laser-induced periodic surface structures, and to follow the expansion and disintegration of nano-objects during laser ablation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fractal hydrodynamic model of high-fluence laser ablation plasma expansion

Optical/electrical characterization of transient plasmas generated by high-fluence (up to 1 kJ/cm{sup 2}) laser ablation of various targets revealed as a general feature the splitting of the plume in two structures. In order to account for this behavior, a new fractal hydrodynamic model has been developed in a non-differentiable space-time. The model successfully retrieves the kinetics of the two structures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fundamentals of femtosecond laser ablation of dielectric materials

The modeling of laser-excited dielectric materials requires a detailed description of the electronic excitation. Dielectric materials do not absorb visible light by traditional linear absorption, so the dynamical generation of conduction-band electrons strongly couples to the absorption. The generation of free electrons is initiated by strong-field excitation and followed by multiplication through impact ionization by energetic electrons heated by the laser. The present paper describes an approach to solving the coupled problem of electron excitation and one-dimensional light propagation. The electronic excitation is described in the so-called multiple-rate-equation model, and the light is absorbed by a combination of strong-field excitation and linear absorption by the excited electrons, which are assumed to behave as a free-electron gas described by a Drude model. The model is generic and based on a few key parameters: the wavelength and the pulse duration of the light, and the band gap of the dielectric medium. This allows parametric investigations of ablation phenomena.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Photoemission Studies of Metallic Photocathodes Prepared by Pulsed Laser Ablation Deposition Technique

We present the results of our investigation on metallic films as suitable photocathodes for the production of intense electron beams in RF photoinjector guns. Pulsed laser ablation deposition technique was used for growing Mg and Y thin films onto Si and Cu substrates in high vacuum and at room temperature.Different diagnostic methods were used to characterize the thin films deposited on Si with the aim to optimize the deposition process. Photoelectron performances were investigated on samples deposited on Cu substrate in an ultra high vacuum photodiode chamber at 10{sup -7} Pa. Relatively high quantum efficiencies have been obtained for the deposited films, comparable to those of corresponding bulks. Samples could stay for several months in humid open air before being tested in a photodiode cell. The deposition process and the role of the photocathode surface contamination and its influence on the photoelectron performances are presented and discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dynamic stabilization of Rayleigh-Taylor instability in an ablation front

Dynamic stabilization of Rayleigh-Taylor instability in an ablation front is studied by considering a modulation in the acceleration that consists of sequences of Dirac deltas. This allows obtaining explicit analytical expressions for the instability growth rate as well as for the boundaries of the stability region. As a general rule, it is found that it is possible to stabilize all wave numbers above a certain minimum value k{sub m}, but the requirements in the modulation amplitude and frequency become more exigent with smaller k{sub m}. The essential role of compressibility is phenomenologically addressed in order to find the constraint it imposes on the stability region. The results for some different wave forms of the acceleration modulation are also presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Micromanufacturing Of Hard To Machine Materials By Physical And Chemical Ablation Processes

Miniaturization leads to high requirements to the applied manufacturing processes especially in respect to the used hard to machine materials and the aims of structure size and geometrical accuracy. Traditional manufacturing processes reach their limits here. One alternative for these provide thermal and chemical ablation processes. These processes are applied for the production of different microstructures in different materials like hardened steel, carbides and ceramics especially for medical engineering and tribological applications.

36 MATERIALS SCIENCE↗

Plume dynamics and cluster formation in laser-ablated copper plasma in a magnetic field

Laser-ablated copper plasma plume expanding in a nonuniform magnetic field and ambient gas is investigated to understand plume dynamics using optical emission spectroscopy and fast imaging of the plume. A peculiar oscillatory behavior of the plume observed in magnetic field is discussed. The appearance and enhancement of Cu{sub 2} (A-X) band in ambient gas and in the presence of magnetic field is reported. The presence of magnetic field favors the formation of copper clusters in the expanding plumes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surface chemical reaction of laser ablated aluminum sample for detonation initiation

We explore the evolution of metal plasma generated by high laser irradiances and its effect on the surrounding air by using shadowgraph images after laser pulse termination; hence the formation of laser supported detonation and combustion processes has been investigated. The essence of the paper is in observing initiation of chemical reaction between ablated aluminum plasma and oxygen from air by inducing high power laser pulse (>1000 mJ/pulse) and conduct a quantitative comparison of chemically reactive laser initiated waves with the classical detonation of exploding aluminum (dust) cloud in air. Findings in this work may lead to a new method of initiating detonation from metal sample in its bulk form without the need of mixing nano-particles with oxygen for initiation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Note: Laser ablation technique for electrically contacting a buried implant layer in single crystal diamond

The creation of thin, buried, and electrically conducting layers within an otherwise insulating diamond by annealed ion implantation damage is well known. Establishing facile electrical contact to the shallow buried layer has been an unmet challenge. We demonstrate a new method, based on laser micro-machining (laser ablation), to make reliable electrical contact to a buried implant layer in diamond. Comparison is made to focused ion beam milling.

36 MATERIALS SCIENCE↗

Two-color interferometry and shadowgraphy characterization of an orthogonal double-pulse laser ablation

Orthogonal double pulse laser ablation on aluminum target at atmospheric pressure was studied by time-resolved optical emission spectroscopy, shadowgraphy and two-color interferometry. Studies were realized as a function of the distance from the first pulse plasma induced in air to the sample surface. The evolution of the electron and neutral particles densities were determined by two-color interferometry. Line intensification mechanisms are discussed based on the interferometry results and the plumes interaction dynamics. It was found that the sample heating by the preablation pulse could contribute to the observed emission enhancement.

36 MATERIALS SCIENCE↗

Vibration waveform effects on dynamic stabilization of ablative Rayleigh-Taylor instability

An analysis of dynamic stabilization of Rayleigh-Taylor instability in an ablation front is performed by considering a general square wave for modulating the vertical acceleration of the front. Such a kind of modulation allows for clarifying the role of thermal conduction in the mechanism of dynamic stabilization. In addition, the study of the effect of different modulations by varying the duration and amplitude of the square wave in each half-period provides insight on the optimum performance of dynamic stabilization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗