Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “universal relation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Comparative Evaluation of Spectral Methods for Robust Reactor Noise Estimation

Reactor noise analysis provides a noninvasive means to determine neutron kinetic parameters from stochastic fluctuations in detector signals. However, standard cross-power spectral density (CPSD) analyses can be sensitive to numerical processing choices, which may introduce processing-dependent systematic shifts in estimates of the prompt neutron decay constant (α) and limit reproducibility. This study uses a hybrid multitaper–Welch spectral estimator to analyze subcritical noise measurements from a fast-spectrum critical assembly. The decay constant α was extracted using three frequency-domain methods: the CPSD, the magnitude-squared coherence (MSC), and the generalized magnitude-squared coherence (GMSC). These coherence-based estimators normalize detector auto-spectral structure and are expected to reduce the sensitivity of fitted α values to processing parameters. A Sobol global sensitivity analysis identified which numerical inputs most strongly influence the fitted values of α. All estimators produced a linear dependence of α on inverse count rate, with delayed-critical extrapolations near 1.7 × 10 4 s −1 , in agreement within 8% of MCNP6.3 KOPTS benchmark calculations. Sensitivity results show that while the CPSD depends on both time-bin width and taper selection, the MSC and GMSC are dominated by time-bin width alone, indicating reduced parameter coupling and greater robustness to processing variability. These findings demonstrate the feasibility and practical value of coherence-based spectral estimators for extracting α from reactor noise and support their broader application to multi-detector and irregular datasets in subcritical system characterization.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Impact of proton irradiation on 4H-SiC Low Gain Avalanche Detectors (LGADs)

Silicon carbide (SiC) particle detectors have the potential to provide time resolutions and robust performance in extreme environments which exceed that of silicon detectors. In this work 4H-SiC low gain avalanche detectors (LGADs) and complementary PiN diodes were irradiated with 2.5 GeV protons at fluences up to 3.33 × 10 14 p/cm 2 . The electrostatic performance of both irradiated and non-irradiated devices was evaluated using I-V and C-V measurements. Moreover, charge collection measurements using α particles were also conducted. SiC LGADs displayed a loss in rectification, high ON-state resistances >10 10 Ω-cm 2 , and the complete removal of gain when exposed to the highest proton fluence. Additionally, the reductions in capacitance and OFF-state current pointed to compensation of the gain layer as a gain reducing mechanism. The introduction of radiation-induced defects also hinders carrier acceleration, which reduces impact ionization and further gain reduction. LGADs exposed to a fluence of 1 × 10 14 p/cm 2 experienced a partial recovery in gain (originally having a value of ∼ 2) with a value of ∼ 1.65 when applying a bias of 500 V. Charge trapping was also seen in the reduction of charge collection efficiency (CCE) to ∼ 65% for the PiN diode. However, despite the reduction in device performance, the demonstration of a measurable signal after irradiation points to the potential of SiC LGAD detectors for future high energy physics applications.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Anisotropic magnetocaloric effect and critical behavior in CrCl 3

We report anisotropic magnetocaloric effect and magnetic critical behavior in the van der Waals crystal CrCl 3 . The maximum magnetic entropy change $-ΔS^{max}_M ~ 14.6 J kg -1 K -1 and the relative cooling power RCP ~ 340.3 J kg -1 near T c with a magnetic field change of 5 T are much larger when compared to CrI 3 or CrBr 3 . The rescaled ΔS M (T, H) curves collapse onto a universal curve, confirming the second-order ferromagnetic transition. Finally, further critical behavior analysis around T c presents a set of critical exponents β = 0.28 (1) with T c = 19.4 (2) K, γ = 0.89 (1) with T c = 18.95 (8) K, and δ = 4.6 (1) at T c = 19 K , which are close to those of the theoretical tricritical mean-field model.

2-dimensional systems↗
DOE OSTI2022

Chameleon early dark energy and the Hubble tension

Early dark energy (EDE) offers a particularly interesting theoretical approach to the Hubble tension, albeit one that introduces its own set of challenges, including a new “why then” problem related to the EDE injection time at matter-radiation equality, and a mild worsening of the large-scale structure (LSS) tension. Both these challenges center on the properties of dark matter, which becomes the dominant component of the Universe at EDE injection and is also responsible for seeding LSS. Driven by this, we present the potential of couplings between EDE and dark matter to address these challenges, focusing on a mechanism similar to chameleon dark energy theories, deeming this chameleon early dark energy (CEDE). We present relevant background and perturbation equations and study the dynamics of the case of a quartic scalar potential and an exponential coupling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Continuum Model Development for Flow and Transport in Electrochemical Systems

Stanford University (Subcontractor) shall provide the services of qualified multiscale modelers to perform tasks that contribute to reaching the objectives of the LDRD project entitled Automated and Accelerated Continuum Model Development for Electrochemical Systems (Tracking number 24-ERD-051). These tasks relate to the development, deployment, and validation of multiscale models relevant to flow and transport in electrochemical systems.

42 ENGINEERING↗
DOE OSTI2025

Developing Partnership between San Jose State University and DOE Lawrence Livermore National Laboratory to Enhance Climate Research Equity and Inclusion

One of the key objectives of this project was to develop partnership between San Jose State University (SJSU) and the Lawrence Livermore National Laboratory (LLNL), a US Department of Energy (DOE) funded national laboratory. Both institutions are closely located within the San Francisco Bay Area in California and their researchers share overlapping research interests and expertise related to Earth system sciences. By leveraging their connections with LLNL, faculty and students from SJSU gained exposure to state-of-the-art observations and simulations related to Earth system sciences, including but not limited to the usage of the facility data provided by the DOE Atmospheric Radiation Measurement (ARM) program and data analysis techniques for interpreting and analyzing the DOE Energy Exascale Earth System Model (E3SM) simulations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Stellar-reddening-based Extinction Maps for Cosmological Applications

Cosmological surveys must correct their observations for the reddening of extragalactic objects by Galactic dust. Existing dust maps, however, have been found to have spatial correlations with the large-scale structure of the Universe. Errors in extinction maps can propagate systematic biases into samples of dereddened extragalactic objects and into cosmological measurements such as correlation functions between foreground lenses and background objects and the primordial non-Gaussianity parameter f NL . Emission-based maps are contaminated by the cosmic infrared background, while maps inferred from stellar reddenings suffer from imperfect removal of quasars and galaxies from stellar catalogs. Thus, stellar-reddening-based maps using catalogs without extragalactic objects offer a promising path to making dust maps with minimal correlations with large-scale structure. We present two high-latitude integrated extinction maps based on stellar reddenings, with a point-spread functions of FWHMs 6'. 1 and 15'. We employ a strict selection of catalog objects to filter out galaxies and quasars and measure the spatial correlation of our extinction maps with extragalactic structure. Our galactic extinction maps have reduced spatial correlation with large-scale structure relative to most existing stellar-reddening-based and emission-based extinction maps.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Alkali element (Li, Na, K, and Rb) doping of Cu 2 BaGe 1– x Sn x Se 4 films

Cu 2 BaGe 1–x Sn x Se 4 (CBGTSe) represents an exemplary system within the I 2 –II–IV–X 4 (I = Ag, Cu; II = Sr, Ba; IV = Ge, Sn; X = S, Se) family, which has been introduced to target suppressing the formation of anti-site defects and associated defect clusters within the analogous kesterite Cu 2 ZnSn(S,Se) 4 . Previous studies on CBGTSe films showed relatively low hole carrier densities (<10 13 cm –3 ), which may limit their corresponding application as active layers within photovoltaic, thermoelectric, and optoelectronic devices. In the current study, we explore the incorporation of alkali elements (Li, Na, K, and Rb) into CBGTSe films as prospective dopants to address the low hole carrier density and to allow for property tunability. First, incorporation of Na-, K-, and Rb-dopants noticeably increases the average grain sizes for CBGTSe films, while the Li-dopant has relatively limited impact. In addition, the alkali-dopants lead to a 1 to 3 orders of magnitude increase in hole carrier density (up to 10 15 cm –3 is achieved using K doping, corresponding to the alkali element yielding the highest doping efficiency). Here, the alkali-doped films show slightly lower minority carrier lifetimes and carrier mobility values than the non-doped samples, and these values are found to follow an approximate universal dependence with carrier density (also considering data derived from other previously explored vacuum-deposited I 2 –II–IV–X 4 chalcogenide films). As alkali-doping can significantly increase carrier densities, alkali elements can be considered useful p-type dopants for CBGTSe, as well as prospectively for other analogous I 2 –II–IV–X 4 systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

The End of Galaxy Surveys

For nearly a century, imaging and spectroscopic surveys of galaxies have given us information about the contents of the universe. We attempt to define the logical end point of such surveys by defining not the next galaxy survey but rather the final galaxy survey at near-infrared wavelengths; this would be the galaxy survey that exhausts the information content useful for addressing extant questions. Such a survey would require incredible advances in a number of technologies, and the survey details will depend on the as yet poorly constrained properties of the earliest galaxies. Using an exposure time calculator, we define nominal surveys for extracting the useful information for three science cases: dark energy cosmology, galaxy evolution, and supernovae (SN). We define scaling relations that trade off sky background, telescope aperture, and focal plane size to allow for a survey of a given depth over a given area. For optimistic assumptions, a 280 m telescope with a marginally resolved focal plane of 20 deg 2 operating at L2 could potentially exhaust the cosmological information content of galaxies in a 10 yr survey. For galaxy evolution (making use of gravitational lensing to magnify the earliest galaxies) and SN, the same telescope would suffice. We discuss the technological advances needed to complete the last galaxy survey. While the final galaxy survey remains well outside of our technical reach today, we present scaling relations that show how we can progress toward the goal of exhausting the information content encoded in the shapes, positions, and colors of galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Nearby Sites Show Similar Upwind Sources and Differing Semivolatile Concentrations in Coastal Aerosol Particles

The Eastern Pacific Cloud Aerosol Precipitation Experiment (EPCAPE) characterized aerosol composition using measurements at two sites within 3 km (Scripps Pier and Mt. Soledad) from 15 February 2023 to 14 February 2024. Comparing the two sites shows the strong influence of upwind sources that results in similar monthly compositions at both sites. The seasonal changes in chemical mass concentrations were largely driven by the upwind source regions, with coastal northwesterly back-trajectories occurring 63−65% of the year and bringing submicrometer mass concentrations that were lower than the EPCAPE average for all trajectories at each site. In contrast, refractory black carbon (rBC) and nonrefractory (NR)-organics and nitrate mass concentrations exceeded EPCAPE average concentrations for back-trajectories from urban areas such as Los Angeles-Long Beach. For hourly measurements, NR-organics and non-sea-salt (NSS)-sulfate mass concentrations at Mt. Soledad were correlated strongly (r = 0.73−0.82) to those measured at Scripps Pier, but NR-nitrate was correlated only moderately (r = 0.63). The explanation for the lower correlation of NR-nitrate is both emissions between the sites and semivolatility, with semivolatility accounting for site-to-site changes in daily averages of +0.01 μg m −3 per percentage site-to-site difference in relative humidity and −0.07 μg m −3 per degree Celsius site-to-site difference in temperature. On average, comparing Scripps Pier to Mt. Soledad, NR-nitrate was higher by 29% because of relative humidity and lower by −26% because of temperature. NR-nitrate and rBC mass concentrations at Scripps Pier for nighttime were 13−15% higher than those for daytime because land breezes brought higher inland concentrations. Concentrations of rBC were 52% higher at Mt. Soledad than those measured at Scripps Pier, accompanied by increases in tracers for brake wear because of traffic on the steep roads within 10 m of that site. The implications are that these nearby sites had comparable monthly concentrations of measured components due to their similar backtrajectories, but hourly and daily concentration differences supported quantification of the meteorological effects from relative humidity and temperature on semivolatile NR-nitrate as well as minor differences from land−sea breezes and local emissions.

Aerosols↗
DOE OSTI2025

Motion of Molecules in Supramolecular Scaffolds Enhances Bone Regeneration

The regeneration of human tissues is a great scientific challenge and a critical factor to achieve a long healthspan and prevent disabilities due to injury or disease. Materials chemistry can contribute to this goal with the development of bioactive supramolecular systems that can signal cells for regeneration. Recent work in our laboratory using in vivo models of spinal cord injury and cartilage regeneration has demonstrated that the motion of bioactive molecules in supramolecular scaffolds enhances receptor signaling. We report here on a novel molecular strategy to control supramolecular motion in filamentous assemblies using bone regeneration as a functional target. The supramolecular assemblies are composed of monomers that arrange, by design, with either parallel or antiparallel β-sheets, and some of them contain a terminal peptide sequence that binds BMP-2. We found that parallel β-sheet supramolecular assemblies promote greater osteogenic differentiation of progenitor cells in vitro relative to antiparallel assemblies, as well as superior quality of newly regenerated bone in a rat model of spinal fusion. Furthermore, these assemblies drastically reduce the dangerous supraphysiological dose of BMP-2 used clinically for spinal fusion. Here, we attribute the enhanced bioactivity to the weaker nature of hydrogen bonds in parallel relative to antiparallel β-sheet assemblies, which in turn allows greater supramolecular motion and cell signaling of the growth factor-binding molecules.

Anatomy↗
DOE OSTI2026

Stacked reverberation mapping of high-redshift quasars in DESI. I. Feasibility analysis

The broad-line region of quasars has long been probed by reverberation mapping techniques that measure time lags between continuum and broad emission-line variations. Stacked reverberation mapping has been proposed as a less observationally expensive alternative to traditional methods. This ensemble approach also reduces biases from small-number statistics. The Dark Energy Spectroscopic Instrument (DESI) is conducting the most extensive spectroscopic survey of quasars to date. We create mock light curves emulating expected DESI quasar observations at redshifts $1.48\lt z\lt 5.2$ and luminosities $44.68 \le \log \lambda L_{1350 \mathring{\rm A}{}} / \mathrm{erg\, s^{-1}} \le 45.99$ to test stacked reverberation mapping feasibility using sparse spectroscopic data paired with well-sampled photometric data. The pipeline, using the lag estimation code JAVELIN (Just Another Vehicle for Estimating Lags In Nuclei), successfully recovers the simulated C IV lags within 1σ of the true values using spectroscopic light curves composed of only a few spectral epochs (2–10) with irregular cadences. We investigate how observational factors, including C IV flux error magnitude, number of stacked quasars, and spectral epoch count, affect performance. This work motivates a pathway for future stacked reverberation mapping projects with large-scale spectroscopic surveys of quasars having $\ge 2$ spectroscopic observations. Our results suggest an economical alternative for constraining and extending the radius–luminosity relation to higher redshifts and luminosities. Subsequently, this relation can be employed more reliably in single-epoch black hole mass measurements and quasar cosmology in these distant regimes.

quasars: general, quasars: supermassive black hole↗
DOE OSTI2025

Alternating and Gaussian Fermionic Isometric Tensor Network States

Isometric tensor networks in two dimensions enable efficient and accurate study of quantum many-body states, yet the effect of the isometric restriction on the represented quantum states is not fully understood. We address this question in two main contributions. First, we introduce an improved variant of isometric tensor network states (isoTNS) in two dimensions, where the isometric arrows on the columns of the network alternate between pointing upward and downward; hence the name alternating isometric tensor network states. Second, we introduce a numerical tool—the isometric Gaussian fermionic TNS (isoGfTNS)—that incorporates isometric constraints into the framework of Gaussian fermionic tensor network states. We demonstrate in numerous ways that alternating isoTNSs represent many-body ground states of two-dimensional quantum systems significantly better than the original isoTNSs. First, we show that the entanglement in an isoTNS is mediated along the isometric arrows and that alternating isoTNSs mediate entanglement more efficiently than conventional isoTNSs. Second, alternating isoTNSs correspond to a deeper, and thus more representative, sequential-circuit construction of depth 𝒪⁢(𝐿𝑥 ⋅𝐿𝑦) compared to the original isoTNSs of depth 𝒪⁢(𝐿𝑥 +𝐿𝑦). Third, using the Gaussian framework and gradient-based energy minimization, we provide numerical evidence of better bond-dimension scaling and variational energy of alternating isoGfTNSs for ground states of various free-fermionic models, including the Fermi surface, the band insulator, and the 𝑝𝑥 +𝑖⁢𝑝𝑦 mean-field superconductor. Finally, benchmarking on the transverse-field Ising model, we demonstrate that an alternating isoTNS provides substantially improved performance and stability relative to the original isoTNS for the ground-state search algorithm in interacting systems.

Wu, Yantao [Chinese Academy of Sciences, Beijing (↗
DOE OSTI2026

Polarization observables 𝑇 and 𝐹 in the 𝛾⁢𝑝→𝜋 0 ⁢𝑝 reaction at CLAS

Pion photoproduction in the $\vec{γ}$$\vec{p}$ → π 0 p reaction has been measured in the FROzen Spin Target (FROST) experiment at the Thomas Jefferson National Accelerator Facility. In this experiment, circularly polarized photons with energies up to 3.082 GeV impinged on a transversely polarized frozen-spin target. Final-state protons were detected in the Continuous Electron Beam Accelerator Facility (CEBAF) Large Acceptance Spectrometer. The polarization observables T and F have been extracted for W from 1445 to 2525 MeV, of which the energy range is much broader, and the precision is better than the existing measurements in higher W ranges. The data generally agree with predictions of present partial-wave analyses but also show marked differences for higher W ranges. By incorporating the present data into the databases, the Scattering Analysis Interactive Data (SAID) fits have been improved with relatively small χ 2 and significant changes in the parameters of the (1910)1/2 + and N(2190)7/2 − have been found with the JüBo model.

particle production↗
DOE OSTI2026

Optical suppression of defect-related photoluminescence in GeSn

Reports of photoluminescence from GeSn grown on Ge substrates by molecular beam epitaxy have been limited. We find that one limiting factor to observing photoluminescence is due to localized defect states marked by photoluminescence at 2400 nm and originating from the Ge substrate and buffer layer. In this study, we report on an optical study utilizing doped Ge(001) substrates to effectively suppress defect-related photoluminescence in GeSn layers by filling localized defect trap states. For this experiment, a GeSn layer with Sn content up to 10.5 ± 0.5% was grown on a doped Ge(001) substrate. Analysis of the physics of the photoluminescence spectrum collected from the GeSn thin film shows an emission at the expected wavelength of 2300 nm for 10.5 ± 0.5% Sn content and the absence of the typically observed defect-related signal at 2400 nm. This understanding is further confirmed using short-pulse optical excitation of the GeSn grown on undoped Ge substrates.

Chemical vapor deposition↗
DOE OSTI2020

MCNP calculations concerning the UW 137 Cs release event (Final Report)

This document supersedes earlier reports (LA-UR-19-32358 and LA-UR-20-22216) that discussed MCNP-calculated conversion factors (count rate per unit activity per unit area) for collimated 2”x2” NaI detectors (Ludlum model 44-10 and Thermo model SPA3) in contact with duct and plenum walls. Specifically, for duct and plenum dimensions and construction details of interest to the University of Washington ¹³⁷Cs release event. This document also corrects some of the data presented in the earlier LA-UR reports.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

AI-powered municipal solid waste management: a comprehensive review from generation to utilization

The accumulation of municipal solid waste (MSW) continues to rise due to burgeoning population, rapid global urbanization and economic growth, intensifying ecological concerns associated with landfills and greenhouse gas (GHG) emissions. Over the past 2 decades, global waste generation has surged by 50%, with one-third remaining uncollected and about 70% sent to landfills. This review examines the critical role of integrating emerging technologies, such as advanced sensors and artificial intelligence (AI), into end-to-end MSW management to alleviate landfill burdens. The suitability of various AI tools for different stages of MSW management is assessed, alongside the deployment of advanced sensors including hyperspectral cameras, computer vision systems, and internet of things (IoT) devices for material identification. Applications of genetic algorithms and reinforcement learning for optimizing collection routes, reducing costs, and lowering emissions are highlighted. Life cycle assessment (LCA) across all stages of MSW management is also reviewed, along with future trends in leveraging generative AI, natural language processing (NLP), and agent-based AI systems to analyze waste generation patterns and public sentiment. Efficient collection and handling can be enhanced through route optimization with geographic information systems and real-time bin-level monitoring. Furthermore, sensor-embedded, real-time object detection systems paired with robotics enable material characterization and automated sorting, thereby lowering costs and diverting waste from landfills into value-added products for diverse industrial sectors including packaging, chemicals, textiles, metals and glass, transportation, and electronics industries. Without intervention, global waste is projected to reach 4.54 billion tons by 2050, contributing direct economic costs of $\$$400 billion and roughly 2.38 billion tons of CO 2 -equivalent emissions annually. This review demonstrates how AI-driven, end-to-end solutions for MSW management can mitigate economic and environmental challenges, while directly supporting the United Nations Sustainable Development (UNDP) goals related to innovation and infrastructure (SDG 9), sustainable cities (SDG 11), responsible consumption and production (SDG 12), and climate action (SDG 13).

09 BIOMASS FUELS↗