SEARCH · Engineering Papers

Results for “transference number”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

All sources NASA NTRS DOE OSTI

NASA NTRS1973

Prediction of free turbulent mixing using a turbulent kinetic energy method

Free turbulent mixing of two-dimensional and axisymmetric one- and two-stream flows is analyzed by a relatively simple turbulent kinetic energy method. This method incorporates a linear relationship between the turbulent shear and the turbulent kinetic energy and an algebraic relationship for the length scale appearing in the turbulent kinetic energy equation. Good results are obtained for a wide variety of flows. The technique is shown to be especially applicable to flows with heat and mass transfer, for which nonunity Prandtl and Schmidt numbers may be assumed.

Harsha, P. T.↗

NASA NTRS1975

Preliminary design study. Shuttle modular scanning spectroradiometer

Fundamental concepts on which to base a detailed design for a Shuttle Modular Scanning Spectroradiometer were developed, and a preliminary design is presented. The recommended design features modularity and flexibility. It includes a 75-cm f/1.7-telescope assembly in an all-reflective Schmidt configuration, a solid state scan system (pushbroom) with high resolution over a 15 deg field of view, and ten detector channels covering the spectral range from 0.45 to 12.5 micrometers. It uses charge transfer device techniques to accommodate a large number of detector elements for earth observation measurements. Methods for in-flight radiometric calibration, for image motion compensation, and for data processing are described. Recommendations for ground support equipment are included, and interfaces with the shuttle orbiter vehicle are illustrated.

Source record↗

NASA NTRS1978

Prediction of nozzle wall pressure distribution and its application to flow over roughened surfaces

The results from a computer program which predicts two-dimensional inviscid flow in a converging-diverging nozzle are presented. The pressure drops are in excellent agreement with experimental values. The free stream wall conditions are used to present experimental heat transfer values in terms of the Stanton number for nozzle flow for both artificially-roughened and smooth wall surfaces.

Mckillop, A. A.↗

NASA NTRS1982

The acoustical structure of highly porous open-cell foams

This work concerns both the theoretical prediction and measurement of structural parameters in open-cell highly porous polyurethane foams. Of particular interest are the dynamic flow resistance, thermal time constant, and mass structure factor and their dependence on frequency and geometry of the cellular structure. The predictions of cell size parameters, static flow resistance, and heat transfer as accounted for by a Nusselt number are compared with measurement. Since the static flow resistance and inverse thermal time constant are interrelated via the 'mean' pore size parameter of Biot, only two independent measurements such as volume porosity and mean filament diameter are required to make the predictions for a given fluid condition. The agreements between this theory and nonacoustical experiments are excellent.

Lambert, R. F.↗

NASA NTRS1985

New Facility to Study Unsteady Wake Effects on Turbine Airfoil Heat Transfer

A significant portion of the SSME aerothermal loads program is directed at the heat transfer effects of the unsteady flows, particularly wakes, that occur naturally in turbomachinery. Although these phenomena occur in all turbomachines, we feel they will be more severe in the SSME turbines because of the high heat transfer associated with the very high Reynolds numbers over the SSME airfoils.

Simoneau, R. J.↗

NASA NTRS1985

Shuttle glow emissions due to radiative relaxation of highly vibrationally excited NO molecules produced by surface reflection

A new mechanism is proposed for the Space Shuttle glow, which is due to the radiative relaxation of ambient nitric-oxide molecules that are excited to very high vibrational levels by collisions with the Shuttle surface. Many of the particles colliding with the Shuttle surface at a very high speed (about 8 km/sec) would bounce off, exciting vibrational and rotational motions of molecules up to the level of vibrational quantum number v not greater than 35. Radiative transfer from these high levels should cause emissions in the spectrum range from infrared (IR) to visible red depending upon the transition paths. A perturbation method is used to calculate the transition probability and the emission intensity for the transitions of Delta-v not greater than 4. The result indicates that the Delta-v not greater than 4 transitions from high vibrational levels dominates the other transitions; the Delta-v = 4 transitions generally occur at the IR range.

Shimazaki, T.↗

NASA NTRS1987

Spectrometry: Report of panel

Spectroscopic measurements are required to define the spectral background and provide the detailed spectral information that is essential for the design of species-specific systems and the analysis of data obtained from them. This function of spectroscopic measurements is expected to be an important part of any tropospheric remote-sensing program, and both emission and absorption spectroscopy are relevant in this context. The data from such observations are of value to tropospheric science in their own right, during the initial phases while species-specific techniques and instruments are under development. In addition, there are a number of unresolved problems in tropospheric radiative transfer and spectroscopy which presently limit the accuracy and reliability of all remote sensing methods. Only through a supporting program of spectroscopic measurements can progress be made in improving the understanding of these aspects of radiative transfer and ultimately reaching the desired confidence in the accuracy to species-specific monitoring techniques.

Farmer, C. Barney↗

NASA NTRS1987

Support of the eight-foot high temperature tunnel modification project

In order to meet the need for propulsion testing in the high supersonic range from Mach 4 to Mach 7, NASA has undertaken the modification of the Langley Eight Foot High Temperature Tunnel to add alternate Mach number capability and oxygen enrichment to allow the testing of operating engines at these Mach numbers and at true temperature tunnel. The transfer of liquid oxygen (LOX) from a storage vessel to a rocket engine generally requires the use of a pressurizing gas at high pressures. Although nitrogen is preferred, unfortunately, when gaseous nitrogen (GN2) is used as the pressurant to transfer liquid oxygen from a storage tank to the tunnel combustor, it contaminates the liquid oxygen and effects a loss of performance in the engine. The contamination of the LOX by the pressurizing GN2 is described, which may prove to be an important operational constraint. It is desirable to have reliable data concerning the penetration of GN2 into LOX during pressurization and the subsequent of self cleaning after blowdown.

Ngo, Kim Chi↗

NASA NTRS1987

Navier-Stokes simulation of a hypersonic generic wing/fuselage

An unsteady thin-layer Navier-Stokes code is used to calculate a generic wing/fuselage configuration at a Mach number of 25 and freestream conditions corresponding to an altitude of 220,000 feet. Calculations were performed with the assumptions of a perfect gas and with chemical equilibrium, and the boundary layer was assumed to be turbulent and to have a surface temperature prescribed at 1255 K. Results for the two different gas assumptions were compared in terms of distributions of pressure, density, temperature, Mach number, ratio of specific heat, and heat transfer. Numerical problems arising in the calculations were identified.

Wai, John C.↗

NASA NTRS1991

Lunar missions using chemical propulsion: System design issues

To transport lunar base elements to the Moon, large high-energy propulsion systems will be required. Advanced propulsion systems for lunar missions can significantly reduce launch mass and increase the delivered payload, resulting in significant launch cost savings. In this report, the masses in low Earth orbit (LEO) are compared for several propulsion systems: nitrogen tetroxide/monomethyl hydrazine (NTO/MMH), oxygen/methane (O2/CH4), oxygen/hydrogen (O2/H2), and metallized O2/H2/Al propellants. Also addressed are payload mass increases enabled with these systems; system design issues involving the engine thrust levels, engine commonality between the transfer vehicle and the excursion vehicle; the number of launches to place the lunar mission vehicles into LEO; and analyses of small lunar missions launched from a single Space Transportation System-Cargo (STS-C) flight.

Palaszewski, Bryan↗

NASA NTRS1991

Investigation of radiative interactions in supersonic internal flows

Analyses and numerical procedures are presented to study the radiative interactions of absorbing emitting species in chemically reacting supersonic flow in various ducts. The 2-D time dependent Navier-Stokes equations in conjunction with radiative flux equation are used to study supersonic flows undergoing finite rate chemical reaction in a hydrogen air system. The specific problem considered is the flow of premixed radiating gas between parallel plates. Specific attention was directed toward studying the radiative contribution of H2O, OH, and NO under realistic physical and flow conditions. Results are presented for the radiative flux obtained for different gases and for various combination of these gases. The problem of chemically reacting and radiating flows was solved for the flow of premixed hydrogen-air through a 10 deg compression ramp. Results demonstrate that the radiative interaction increases with an increase in pressure, temperature, amount of participating species, plate spacing, and Mach number. Most of the energy, however, is transferred by convection in the flow direction. In general the results indicate that radiation can have a significant effect on the entire flow field.

Tiwari, Surendra N.↗

NASA NTRS1989

Millimeter wave radiative transfer studies for precipitation measurements

Scattering calculations using the discrete dipole approximation and vector radiative transfer calculations were performed to model multiparameter radar return and passive microwave emission for a simple model of a winter storm. The issue of dendrite riming was addressed by computing scattering properties of thin ice disks with varying bulk density. It was shown that C-band multiparameter radar contains information about particle density and the number concentration of the ice particles. The radiative transfer modeling indicated that polarized multifrequency passive microwave emission may be used to infer some properties of ice hydrometers. Detailed radar modeling and vector radiative transfer modeling is in progress to enhance the understanding of simultaneous radar and radiometer measurements, as in the case of the proposed TRMM field program. A one-dimensional cloud model will be used to simulate the storm structure in detail and study the microphysics, such as size and density. Multifrequency polarized radiometer measurements from the SSMI satellite instrument will be analyzed in relation to dual-frequency and dual-polarization radar measurements.

Vivekanandan, J.↗

NASA NTRS1991

Variation of superheat with subcooling in nucleate pool boiling

An analysis is presented that explains the variation of superheat with subcooling that has been observed by a number of researchers investigating nucleate boiling heat transfer at constant heat flux. It is shown that superheat initially increases with increasing subcooling near saturated conditions because of the way in which changes in active site density and average bubble frequency with increasing subcooling affect the rate of heat removal from the heater surface by enthalpy transport and microlayer evaporation. As subcooling increases further, natural convection begins to play an increasingly important role in the heat transfer process. Ultimately, natural convection is able to accommodate the entire imposed heat flux, after which superheat decreases as subcooling increases. The success of the analysis in explaining the variation of superheat with subcooling suggests that the rate of the heat removal from the heater surface is completely determined by the mechanisms of enthalpy transport, natural convection, and microlayer evaporation.

Judd, R. L.↗

NASA NTRS1992

Flow and heat transfer in space vehicle tile gaps

The flow patterns and the characteristics of the convective heat transfer in intersecting tile gaps on space vehicles were experimentally investigated using a water channel flow facility for simulating flow conditions in the tile gaps on the Aeroassist Flight Experiment (AFE) vehicle. It was found that penetration of external flow into the perpendicular gap was limited in most cases to roughly two gap widths, while greater entrainment occurred in the parallel gap. Heat transfer in the bulk of the perpendicular gap occurred by natural convection. The Reynolds number and the relative tile-height differences had the strongest influence on heat transfer and affected both the magnitude and the symmetry of the temperature and the flow fields.

Garimella, S. V.↗

NASA NTRS1992

Pulsed single-blow regenerator testing

A pulsed single-blow method has been developed for testing of Stirling regenerator materials performance. The method uses a tubular flow arrangement with a steady gas flow passing through a regenerator matrix sample that packs the flow channel for a short distance. A wire grid heater spanning the gas flow channel is used to heat a plug of gas by approximately 2 K for approximately 350 ms. Foil thermocouples monitor the gas temperature entering and leaving the sample. Data analysis based on a 1D incompressible-flow thermal model allows the extraction of Stanton number. A figure of merit involving heat transfer and pressure drop is used to present results for steel screens and steel felt. The observations show a lower figure of merit for the materials tested than is expected based on correlations obtained by other methods.

Oldson, J. C.↗

NASA NTRS1992

Concurrent file operations in a high performance FORTRAN

Distributed memory multiprocessor systems can provide the computing power necessary for large scale scientific applications. A critical performance issue for a number of these applications is the efficient transfer of data to secondary storage. Recently several research groups have proposed FORTRAN language extensions for exploiting the data parallelism of such scientific codes on distributed memory architectures. However, few of these high performance FORTRAN's provide appropriate constructs for controlling the use of the parallel I/O capabilities of modern multiprocessing machines. In this paper, we propose constructs to specify I/O operations for distributed data structures in the context of Vienna Fortran. These operations can be used by the programmer to provide information which can help the compiler and runtime environment make the most efficient use of the I/O subsystem.

Brezany, Peter↗

NASA NTRS1998

Understanding Combustion Processes Through Microgravity Research

A review of research on the effects of gravity on combustion processes is presented, with an emphasis on a discussion of the ways in which reduced-gravity experiments and modeling has led to new understanding. Comparison of time scales shows that the removal of buoyancy-induced convection leads to manifestations of other transport mechanisms, notably radiative heat transfer and diffusional processes such as Lewis number effects. Examples from premixed-gas combustion, non-premixed gas-jet flames, droplet combustion, flame spread over solid and liquid fuels, and other fields are presented. Promising directions for new research are outlined, the most important of which is suggested to be radiative reabsorption effects in weakly burning flames.

Ronney, Paul D.↗

NASA NTRS1958

Aerodynamic Heating of Blunt Nose Shapes at Mach Numbers up to 14

Results are presented from investigations of the aerodynamic heating rates of blunt nose shapes at Mach numbers up to 14. The wind-tunnel tests examined flat-faced cylinder stagnation-point heating rates over the Mach number range. The tests also examined heat transfer and angle of attack.

Source record↗