Results for “time shift” — Page 42

DOE OSTI2021

High-Temperature Multi-Process Sensor Development and Demonstration at Coalfired Power Plants

The main objective of this research program is to design, manufacture, and demonstrate a miniaturized, multi-process, monitoring system (mMPMS) for boiler condition management and easy system deployment to obtain a higher spatial resolution. This system will facilitate a Condition-Based Maintenance (CBM) philosophy that actively monitors the health of assets to predict and prevent failures and maximize availability and generating capacity at a reduced cost. CBM systems can provide boiler data that the advanced process control (APC) system can utilize for plant performance optimization, which is increasingly relevant as coal power plants shift from predominantly base-load operation to predominantly transient operation involving large load swings. The mMPMS is based on an electrochemical sensor that provides a real-time indication of the risk of damage to key locations in the radiant or convective section of a coal-fired boiler such as metal loss rates, heat flux, metal surface temperature, and deposit thickness. These indications can be utilized to optimize boiler performance as well as improve boiler availability in conjunction with corresponding operating conditions. This monitoring system was developed and tested in the high-temperature regions of coal-fired utility boilers in this project but can be applied to many other industries and applications as well. This project leveraged the existing electrochemical noise-based monitoring system and the new sensor design is small enough to be installed through the webbing of the waterwalls without the need for long shut-downs to bend tubes and to make it feasible to obtain high spatial resolution in the boiler. Data is transferred to the plant distributed control system (DCS) and any other control system. The sensor body that houses the sensor assembly was designed to ensure good conductive contact with boiler tubes to ensure the sensor is held at an identical temperature to the tube surface temperature. The data acquisition and signal conditioning modules were redesigned into a small footprint with optimized cooling of the module. System software was developed specifically for the new signal conditioning module and is compatible with plant PLCs. After the preliminary testing at a pilot-scale facility, the three mMPMS were installed at a full-scale pulverized coal-fired plant, PacifiCorp’s Hunter 3. The systems were demonstrated over 20,000 hours at the plant during regular operation. Also, the sensor data was fed to the plant’s advanced process control system to evaluate the corrosion control by the operation changes and utilized to understand the impacts of load cycling with different ramping up and down speeds. At the end of the project, the systems were converted to the permanent installation at the power plant to be used with the advanced process control system installed at the plant.

Advanced Sensors, Corrosion, Ash Deposition, Optim↗

DOE OSTI2022

Full-scale Demonstration of Multi-process Sensor at a Cycling PC-fired Boiler

The main objective of this research program is to design, manufacture, and demonstrate a miniaturized, multi-process, monitoring system (mMPMS) for boiler condition management and easy system deployment to obtain a higher spatial resolution. This system will facilitate a Condition-Based Maintenance (CBM) philosophy that actively monitors the health of assets to predict and prevent failures and maximize availability and generating capacity at a reduced cost. CBM systems can provide boiler data that the advanced process control (APC) system can utilize for plant performance optimization, which is increasingly relevant as coal power plants shift from predominantly base-load operation to predominantly transient operation involving large load swings. The mMPMS is based on an electrochemical sensor that provides a real-time indication of the risk of damage to key locations in the radiant or convective section of a coal-fired boiler such as metal loss rates, heat flux, metal surface temperature, and deposit thickness. These indications can be utilized to optimize boiler performance as well as improve boiler availability in conjunction with corresponding operating conditions. This monitoring system was developed and tested in the high-temperature regions of coal-fired utility boilers in this project but can be applied to many other industries and applications as well. This project leveraged the existing electrochemical noise-based monitoring system and the new sensor design is small enough to be installed through the webbing of the waterwalls without the need for long shut-downs to bend tubes and to make it feasible to obtain high spatial resolution in the boiler. Data is transferred to the plant distributed control system (DCS) and any other control system. The sensor body that houses the sensor assembly was designed to ensure good conductive contact with boiler tubes to ensure the sensor is held at an identical temperature to the tube surface temperature. The data acquisition and signal conditioning modules were redesigned into a small footprint with optimized cooling of the module. System software was developed specifically for the new signal conditioning module and is compatible with plant PLCs. After the preliminary testing at a pilot-scale facility, the three mMPMS were installed at a full-scale pulverized coal-fired plant, PacifiCorp’s Hunter 3. The systems were demonstrated over 20,000 hours at the plant during regular operation. Also, the sensor data was fed to the plant’s advanced process control system to evaluate the corrosion control by the operation changes and utilized to understand the impacts of load cycling with different ramping up and down speeds. At the end of the project, the systems were converted to the permanent installation at the power plant to be used with the advanced process control system installed at the plant.

Advanced Sensors, Corrosion, Ash Deposition, Optim↗

DOE OSTI2024

Combustion Performance and Emissions Optimization Through Integration of a Miniaturized High-Temperature Multi Process Monitoring System

The main objective of this research program is to design, manufacture, and demonstrate a miniaturized, multi-process, monitoring system (mMPMS) for boiler condition management and easy system deployment to obtain a higher spatial resolution of wall conditions in utility boilers. This system will facilitate a Condition-Based Maintenance (CBM) philosophy that actively monitors the health of assets to predict and prevent failures and maximize availability and generating capacity at a reduced cost. CBM systems can provide boiler data that the advanced process control (APC) system can utilize for plant performance optimization, which is increasingly relevant as coal power plants shift from predominantly base-load operation to predominantly transient operation involving large load swings. The mMPMS is based on an electrochemical sensor that provides a real-time indication of the risk of damage to key locations in the radiant or convective section of a coal-fired boiler such as metal loss rates, heat flux, metal surface temperature, and deposit thickness. These indications can be utilized to optimize boiler performance as well as improve boiler availability in conjunction with corresponding operating conditions. This monitoring system was developed and tested in the high-temperature regions of a coal-fired utility boiler in this project but can be applied to many other industries and applications as well. The new sensor design, leveraging the existing electrochemical noise-based monitoring system, is small enough to be installed through the webbing of the waterwalls without the need for long shut-downs to bend tubes and to make it feasible to obtain high spatial resolution in the boiler. Data can be transferred to the plant distributed control system (DCS) and any other control system. The sensor body that houses the sensor assembly was designed to ensure good conductive contact with boiler tubes to ensure the sensor is held at an identical temperature to the tube surface temperature. The data acquisition and signal conditioning modules were redesigned into a small footprint with optimized cooling of the module. System software was developed specifically for the new signal conditioning module and is compatible with plant PLCs. After the preliminary testing at a pilot-scale facility, five mMPMS were installed at a full-scale pulverized coal-fired plant, Basin Electric Power Cooperative’s Leland Olds Unit 1. The systems were demonstrated over a 6-week period during typical operation. Sensor measurements of deposit thickness were validated during the demonstration and subsequently leveraged to determine sensor-based boiler cleaning strategies. These strategies have the benefit of reduced thermal stresses on boiler tubes from over-cleaning and improved boiler water management. At the end of the project, continued development of the sensor technology was carried out at PacifiCorp’s Hunter Station. REI leveraged the permanent installation of the mMPMS in Unit 3 made possible by DOE funding on a separate program. The work at Hunter Plant focused on application of machine learning and artificial intelligence-based models for integration of sensor signals into control and optimization of Hunter Unit 3 processes.

42 ENGINEERING↗

DOE OSTI2023

Time-Temperature-Stress Superposition of PBX 9502 Compressive Creep Data for Lifetime Predictions

The plastic-bonded explosive (PBX) 9502 is a viscoelastic, high-solids loaded polymer bound composite comprised of 95 weight% (wt%) TATB explosive crystals and 5 wt% FK-800 polymer binder. The uniaxial quasi-static mechanical properties have been studied and characterized extensively over 25+ years, including creep. Creep is the strain evolution over time as a result of an asymmetric load typically at temperatures above ambient. Creep measurements to failure can take excessively long periods of time depending on various factors including applied stress, temperature, and loading rate that render a single test to failure impossible. Using the principles of time-temperature-stress superposition (TTSSP), short-term creep tests at various applied stresses and temperatures can be used for long-term creep predictions. The TTSSP model shifts short-term test data using two factors, one for temperature and stress, creating a master curve at a reference test condition. The master curve can be shifted to predict the creep response at any desired test condition. PBX 9502 compression specimens were tested at three temperatures and various applied stresses. This work discusses the TTSSP analysis of PBX 9502 compressive creep data to create a single comprehensive master curve.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Impact of prescribed fire on soil microbial communities in a Southern Appalachian Forest clear-cut

Escalating wildfire frequency and severity, exacerbated by shifting climate patterns, pose significant ecological and economic challenges. Prescribed burns, a common forest management tool, aim to mitigate wildfire risks and protect biodiversity. Nevertheless, understanding the impact of prescribed burns on soil and microbial communities in temperate mixed forests, considering temporal dynamics and slash fuel types, remains crucial. Our study, conducted at the University of Tennessee Forest Resources AgResearch and Education Center in Oak Ridge, TN, employed controlled burns across various treatments, and the findings indicate that low-intensity prescribed burns have none or minimal short-term effects on soil parameters but may alter soil nutrient concentrations, as evidenced by significant changes in porewater acetate, formate, and nitrate concentrations. These burns also induce shifts in microbial community structure and diversity, with Proteobacteria and Acidobacteria increasing significantly post-fire, possibly aiding soil recovery. In contrast, Verrucomicrobia showed a notable decrease over time, and other specific microbial taxa correlated with soil pH, porewater nitrate, ammonium , and phosphate concentrations. Our research contributes to understanding the intricate relationships between prescribed fire, soil dynamics, and microbial responses in temperate mixed forests in the Southern Appalachian Region, which is valuable for informed land management practices in the face of evolving environmental challenges.

Microbiology↗

DOE OSTI2025

Cosmological Simulations of Stellar Halos with Gaia Sausage–Enceladus Analogs: Two Sausages, One Bun?

Observations of the Milky Way’s stellar halo find that it is predominantly comprised of a radially biased population of stars, dubbed the Gaia Sausage–Enceladus, or GSE. These stars are thought to be debris from dwarf galaxy accretion early in the Milky Way’s history. Though typically considered to be from a single merger, it is possible that the GSE debris has multiple sources. To investigate this possibility, we use the IllustrisTNG50 simulation to identify stellar accretion histories in 98 Milky Way analogs—the largest sample for which such an identification has been performed—and find GSE-like debris in 32, with two-merger GSEs accounting for a third of these cases. Distinguishing single-merger GSEs from two-merger GSEs is difficult in common kinematic spaces, but differences are more evident through chemical abundances and star formation histories. This is because single-merger GSEs are typically accreted more recently than the galaxies in two-merger GSEs: the median infall times (with 16th and 84th percentiles) are $5.{9}_{-2.0}^{+3.3}$ and $10.{7}_{-3.7}^{+1.2}$ Gyr ago for single- and two-merger scenarios, respectively. The systematic shifts in abundances and ages that occur as a result suggest that efforts in modeling these aspects of the stellar halo prove ever-important in understanding its assembly.

galactic archaeology↗

DOE OSTI2021

High-Temperature Multi-Process Sensor Development and Demonstration at a Full-scale PC Combustion System

The main objective of this research program is to design, manufacture, and demonstrate a miniaturized, multi-process, monitoring system (mMPMS) for boiler condition management and easy system deployment to obtain a higher spatial resolution of wall conditions in utility boilers. This system will facilitate a Condition-Based Maintenance (CBM) philosophy that actively monitors the health of assets to predict and prevent failures and maximize availability and generating capacity at a reduced cost. CBM systems can provide boiler data that the advanced process control (APC) system can utilize for plant performance optimization, which is increasingly relevant as coal power plants shift from predominantly base-load operation to predominantly transient operation involving large load swings. The mMPMS is based on an electrochemical sensor that provides a real-time indication of the risk of damage to key locations in the radiant or convective section of a coal-fired boiler such as metal loss rates, heat flux, metal surface temperature, and deposit thickness. These indications can be utilized to optimize boiler performance as well as improve boiler availability in conjunction with corresponding operating conditions. This monitoring system was developed and tested in the high-temperature regions of a coal-fired utility boiler in this project but can be applied to many other industries and applications as well. The new sensor design, leveraging the existing electrochemical noise-based monitoring system, is small enough to be installed through the webbing of the waterwalls without the need for long shut-downs to bend tubes and to make it feasible to obtain high spatial resolution in the boiler. Data can be transferred to the plant distributed control system (DCS) and any other control system. The sensor body that houses the sensor assembly was designed to ensure good conductive contact with boiler tubes to ensure the sensor is held at an identical temperature to the tube surface temperature. The data acquisition and signal conditioning modules were redesigned into a small footprint with optimized cooling of the module. System software was developed specifically for the new signal conditioning module and is compatible with plant PLCs. After the preliminary testing at a pilot-scale facility, five mMPMS were installed at a full-scale pulverized coal-fired plant, Basin Electric Power Cooperative’s Leland Olds Unit 1. The systems were demonstrated over a 6-week period during typical operation. Sensor measurements of deposit thickness were validated during the demonstration and subsequently leveraged to determine sensor-based boiler cleaning strategies. These strategies have the benefit of reduced thermal stresses on boiler tubes from over-cleaning and improved boiler water management. At the end of the project, continued development of the sensor technology was carried out at PacifiCorp’s Hunter Station. REI leveraged the permanent installation of the mMPMS in Unit 3 made possible by DOE funding on a separate program. The work at Hunter Plant focused on application of machine learning and artificial intelligence-based models for integration of sensor signals into control and optimization of Hunter Unit 3 processes.

Advanced Sensors, Corrosion, Ash Deposition, Optim↗

DOE OSTI2021

High-Temperature Multi-Process Sensor Development and Demonstration at a Full-scale PC Combustion System

The main objective of this research program is to design, manufacture, and demonstrate a miniaturized, multi-process, monitoring system (mMPMS) for boiler condition management and easy system deployment to obtain a higher spatial resolution. This system will facilitate a Condition-Based Maintenance (CBM) philosophy that actively monitors the health of assets to predict and prevent failures and maximize availability and generating capacity at a reduced cost. CBM systems can provide boiler data that the advanced process control (APC) system can utilize for plant performance optimization, which is increasingly relevant as coal power plants shift from predominantly base-load operation to predominantly transient operation involving large load swings. The mMPMS is based on an electrochemical sensor that provides a real-time indication of the risk of damage to key locations in the radiant or convective section of a coal-fired boiler such as metal loss rates, heat flux, metal surface temperature, and deposit thickness. These indications can be utilized to optimize boiler performance as well as improve boiler availability in conjunction with corresponding operating conditions. This monitoring system was developed and tested in the high-temperature regions of coal-fired utility boilers in this project but can be applied to many other industries and applications as well. This project leveraged the existing electrochemical noise-based monitoring system and the new sensor design is small enough to be installed through the webbing of the waterwalls without the need for long shut-downs to bend tubes and to make it feasible to obtain high spatial resolution in the boiler. Data is transferred to the plant distributed control system (DCS) and any other control system. The sensor body that houses the sensor assembly was designed to ensure good conductive contact with boiler tubes to ensure the sensor is held at an identical temperature to the tube surface temperature. The data acquisition and signal conditioning modules were redesigned into a small footprint with optimized cooling of the module. System software was developed specifically for the new signal conditioning module and is compatible with plant PLCs. After the preliminary testing at a pilot-scale facility, the three mMPMS were installed at a full-scale pulverized coal-fired plant, PacifiCorp’s Hunter 3. The systems were demonstrated over 20,000 hours at the plant during regular operation. Also, the sensor data was fed to the plant’s advanced process control system to evaluate the corrosion control by the operation changes and utilized to understand the impacts of load cycling with different ramping up and down speeds. At the end of the project, the systems were converted to the permanent installation at the power plant to be used with the advanced process control system installed at the plant.

Advanced Sensors, Corrosion, Ash Deposition, Optim↗

DOE OSTI2021

Time-dependent experimental identification of inter-ELM microtearing modes in the tokamak edge on DIII-D

In a series of discharges on the DIII-D tokamak, fast vertical plasma jogs are used to induce current perturbations in the steep gradient region of the H-mode edge. These current perturbations directly influence the edge q profile, decoupling the resonant location and instability drive of pedestal-localized microtearing modes (MTMs.) By exploiting this effect, we develop and apply a new experimental technique to track the dynamical frequency evolution of MTMs in the pedestal region, providing a compelling validation of the MTM model. The frequency of potential MTMs is calculated as the Doppler-shifted electron diamagnetic frequency at rational q=m/n surfaces, showing remarkable agreement with chirped frequency behavior of n=3, 4 and 5 modes detected with fast magnetics. Data is collected throughout multiple ELM cycles in order to build robust statistics describing the time-dependent frequency evolution of MTMs, which can be explained by examining the recovery of pedestal gradients after an ELM event. MTMs have a dominant transport contribution in the electron thermal channel, so the presented results indicate that reduced models of pedestal transport must be electromagnetic in nature and constructed with accurate calculations of MTM stability; inclusion of this physics is essential for accurate predictions of the electron temperature pedestal profile. Supporting measurements of mode saturation, propagation direction and transport fingerprints are made to support the dynamic frequency determination, unambiguously and experimentally identifying MTMs in the pedestal region of DIII-D.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Salt Hydrate Eutectic Thermal Energy Storage for Building Thermal Regulation (Final Technical Report)

Thermal energy storage is anticipated to play an important role in developing the power grid of the future - a power grid that meets increasing demands of users, is resistant to disruptions, but also allows for greater penetration of renewable resources. Specifically, thermal energy storage materials can be integrated into HVAC systems and building envelopes, where they can be used to shift power demands for building climate control from periods of peak demand to periods of low demand. Phase change materials (PCMs) are compelling as low-cost, high energy density thermal energy storage materials for building thermal management. However, there is a lack of high performance low-cost PCMs within the specific temperature ranges which would most effectively allow for power load shifting. Inorganic salt hydrates represent a promising class of PCMs, but their inherent limitations cause them to be currently unavailable for reliable building applications. The overarching goals of this research effort are to: 1) Discover low-cost, high volumetric density salt hydrate eutectic PCMs to store low-quality heat (10 to 40 °C); 2) Introduce a high thermal conductivity matrix to reduce the time constant for energy storage to ~0.1 to 1 hr, incorporate nucleation catalysts to decrease undercooling, and utilize microencapsulation and shape stabilization approaches, minimizing moisture loss/gain, mitigating phase separation, and maintaining stable melting behavior over the lifetime of the compounds; 3) Evaluate the impact these systems have on peak load shifting, and the potential for overall energy savings under different climatic scenarios and building configurations. These goals will be achieved by an integrated research program consisting of six cohesive research subtasks: 1) Materials discovery of eutectic salt hydrate PCMs by using computationally predicted thermodynamic equilibria, coupled with high-throughput experimental validation, 2) Rapid experimental screening of nucleation catalysts identified through robust computational databases, 3) Embedding salt hydrate PCM into a low cost and scalable high conductivity matrix, 4) Microencapsulation of salt hydrate microspheres using hybrid inorganic-polymer microencapsulation approach, 5) Shape stabilization by thermoreversible salt hydrate salogels, and 6) Analysis of end-use using thermal simulations, and characterization of mock-up energy storage finished components.

25 ENERGY STORAGE↗

DOE OSTI2023

On causality conditions in de Sitter spacetime

We carefully consider the Shapiro time delay due to black holes and shockwaves in de Sitter spacetime and study the implications for causality. We discuss how causality conditions of AdS and flat spacetime can be applied in de Sitter spacetime, using spatial shifts measured on the boundary to define 'fastest null geodesics' and taking into account the 'stretching' of the de Sitter Penrose diagram. We consider the propagation of a massless spin-1 field with a non-minimal coupling in a de Sitter shockwave background as an illustrative example. Here, we also briefly discuss connections to the average null energy condition.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2023

Evolution of Energy Efficiency Programs Over Time: The Case of Standby Power

Issued in 2001, Presidential Executive Order 13221 directed federal agencies to purchase products with low standby power, with the goal of 1) reducing energy consumption in federal facilities, and 2) drawing attention to the problem of high standby power consumption, with guidance provided by the Federal Energy Management Program (FEMP). At that time, standby power was newly recognized as an increasing building energy load. Since then, procurement of products with low standby power have been set in place in acquisition processes, and the purchasing power of the federal government continues to influence manufacturers’ design decisions related to standby power. In recent years, FEMP has shifted effort from direct manufacturer outreach for data collection, to integrating low standby requirement into broader acquisition programs including Energy Star and Electronic Product Environmental Assessment Tool (EPEAT). Another milestone has been the labeling of low standby products on the GSA Advantage website to simplify and enhance compliance. Looking forward into the program’s future, this question arises “How do we design programs over time to reflect market and technology changes, by adjusting programmatic requirements while maintaining effectiveness?” This paper discusses that question for the case of standby power, which transitioned from covering a single to multiple environmental attributes, both in the context of the program’s past and future.

Payne, CT↗

DOE OSTI2023

Spread Spectrum Time Domain Reflectometry (SSTDR) and Frequency Domain Reflectometry (FDR) for Detection of Cable Anomalies Using Machine Learning

Cables are initially qualified for nuclear power plant use for 40 years. As plants extend their operating license to 60 and 80 years, continued use of these cables must shift to a performance-based approach since it is cost prohibitive to completely replace cables that are likely still capable of performing their design function. A variety of cable tests are available and are commonly applied during outages when the cables can be taken out of service. Frequency domain reflectometry (FDR) is one of these test methods that is being more broadly accepted and used because it not only detects anomalies along the cable with a low-voltage signal that does not stress the cable insulation, but the technique also locates the anomalies. This supports follow-up local inspection and local repair or partial replacement of a damaged cable segment. Currently, FDR testing is only applied to cables that are taken out of service since the test instrument would be damaged by operational voltages.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2020

Biased tracers in redshift space in the EFTofLSS with exact time dependence

We study the effect of the Einstein-de Sitter (EdS) approximation on the one-loop power spectrum of galaxies in redshift space in the Effective Field Theory of Large-Scale Structure. The dark matter density perturbations and velocity divergence are treated with exact time dependence. Splitting the density perturbation into its different temporal evolutions naturally gives rise to an irreducible basis of biases. While, as in the EdS approximation, at each time this basis spans a seven-dimensional space, this space is a slightly different one, and the difference is captured by a single calculable time- and vec k-dependent function. We then compute the redshift-space galaxy one-loop power spectrum with the EdS approximation (P EdS-approx ) and without (P Exact ). For the monopole we find P 0 Exact /P 0 Ed S-approx ~ 1.003 and for the quadrupole P 2 Exact /P 2 EdS-approx ~ 1.007 at z=0.57, and sharply increasing at lower redshifts. Finally, we show that a substantial fraction of the effect remains even after allowing the bias coefficients to shift within a physically allowed range. This suggests that the EdS approximation can only fit the data to a level of precision that is roughly comparable to the precision of the next generation of cosmological surveys. Furthermore, we find that implementing the exact time dependence formalism is not demanding and is easily applicable to data. Both of these points motivate a direct study of this effect on the cosmological parameters.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2021

Deeply Rooted: Evaluating Plant Rooting Depth as a Means for Enhanced Soil Carbon Sequestration (Full Technical Report)

Soils store three times as much carbon (C) as the atmosphere, but are not at capacity, and enhanced soil C storage is considered an essential strategy to mitigate rising atmospheric CO 2 levels. Agricultural soils have experienced substantial C loss in the past century due to poor agricultural practices and erosion. A shift towards deep-rooting crops and low-impact soil management could potentially increase long-term sequestration of C fixed by plants and stored in their root tissues, particularly for crops that have naturally deep root systems (>1 meter). A substantial amount of the CO 2 taken up by plants is allocated to their root systems, and because C deposited in deep soil layers has a longer residence time (up to millennia, in contrast to C deposited in topsoils), C increases at depth may have better long-term C sequestration potential than topsoils. However, the accrual, turnover, and stabilization of C in subsoils is a critical knowledge gap. We investigated a deeply rooted plant, switchgrass (Panicum virgatum), as a means of increasing carbon stocks in marginal and agricultural soils. We hypothesized that deep (>30 cm) SOC stocks would be greater under bioenergy crops relative to stocks under shallow-rooted conventional crop cover. To test this hypothesis, we compared soil depth profiles beneath deeply rooted switchgrass (cultivated for 4-30 years) and paired shallowrooted annual controls. We studied 12 field sites, 3 that were collected in 2018 before the start of the project as part a Department of Energy (DOE) Sustainable Biofuels study, and 9 that we collected in 2019 on a national field sampling campaign across the eastern US. In our publication from the 2018 study, which was written in collaboration with the LLNL Soil Microbiome Scientific Focus Area (SFA), we found that C stocks increased under switchgrass, but that the increases were dependent on soil texture. In the 2019 study, we found that carbon accrual tended to occur most consistently in low C soil in the southern US, which could indicate that perennial grasses may be a viable strategy to increase SOC in marginals soils in this region. We have published two studies from the 2019 sampling campaign thus far, we measured microbial growth parameters that will aid in modeling subsoil carbon cycling, and we found that switchgrass appears to move water upward in the soil profile and could promote drought tolerance, which a phenomenon commonly performed by trees known as ‘hydraulic redistribution;’ our study is the first to show this can occur in deep-rooted grasses. Finally, we published a modeling paper in collaboration with the LLNL Soil Microbiome SFA, where we found that poorly crystalline minerals are abundant and strongly correlated with organic C in geographically limited zones with enhanced weathering rates. Our results will inform technological development in the agricultural carbon sequestration sector as well as future negative emissions policies.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2021

Deeply Rooted: Evaluating Plant Rooting Depth as a Means for Enhanced Soil Carbon Sequestration (Abbreviated Final Report)

Soils store three times as much carbon (C) as the atmosphere, but are not at capacity, and enhanced soil C storage is considered an essential strategy to mitigate rising atmospheric CO 2 levels. Agricultural soils have experienced substantial C loss in the past century due to poor agricultural practices and erosion. A shift towards deep-rooting crops and low-impact soil management could potentially increase long-term sequestration of C fixed by plants and stored in their root tissues, particularly for crops that have naturally deep root systems (>1 meter). A substantial amount of the CO 2 taken up by plants is allocated to their root systems, and because C deposited in deep soil layers has a longer residence time (up to millennia, in contrast to C deposited in topsoils), C increases at depth may have better long-term C sequestration potential than topsoils. However, the accrual, turnover, and stabilization of C in subsoils is a critical knowledge gap.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Out-of-equilibrium charge redistribution in a copper-oxide based superconductor by time-resolved X-ray photoelectron spectroscopy

Charge-transfer excitations are of paramount importance for understanding the electronic structure of copper-oxide based high-temperature superconductors. In this study, we investigate the response of a Bi 2 Sr 2 CaCu 2 O 8+δ crystal to the charge redistribution induced by an infrared ultrashort pulse. Element-selective time-resolved core-level photoelectron spectroscopy with a high energy resolution allows disentangling the dynamics of oxygen ions with different coordination and bonds thanks to their different chemical shifts. Our experiment shows that the O 1s component arising from the Cu–O planes is significantly perturbed by the infrared light pulse. Conversely, the apical oxygen, also coordinated with Sr ions in the Sr-O planes, remains unaffected. This result highlights the peculiar behavior of the electronic structure of the Cu–O planes. It also unlocks the way to study the out-of-equilibrium electronic structure of copper-oxide-based high-temperature superconductors by identifying the O 1s core-level emission originating from the oxygen ions in the Cu–O planes. This ability could be critical to gain information about the strongly-correlated electron ultrafast dynamical mechanisms in the Cu–O plane in the normal and superconducting phases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

DriveSense: A Noise-Resilient Framework for Driving Mode Identification

Accurate drive mode classification is essential for enhancing the reliability and predictive maintenance of heavy-duty electric trucks. This study proposes a novel fuzzy logic-based framework, DriveSense, for real-time drive mode classification, addressing key challenges such as sensor noise, transitional behaviors, and computational efficiency. The proposed approach integrates a two-stage filtering pipeline, combining adaptive outlier removal and a dynamic Kalman filter to enhance data quality. A fuzzy inference system with smoothened trapezoidal membership functions is then applied to classify driving modes into standstill, constant speed, acceleration, and deceleration while mitigating the effects of noise and edge cases. Performance evaluation using real-world and simulated drive cycles demonstrates significant improvements in classification accuracy (up to 97.8%), F1-score (up to 0.97), and robustness against noise, while reducing false positives. Comparative analysis against baseline models, demonstrates DriveSense’s superior accuracy and generalizability across diverse driving patterns. The framework’s lightweight and interpretable fuzzy inference engine operates with low computational latency, ensuring compatibility with real-time embedded systems typical of heavy-duty electric trucks. Moreover, DriveSense models transitional behaviors through overlapping fuzzy sets and adaptive borderline classification logic, enabling smooth identification of subtle shifts such as rolling stops or gradual deceleration. These results highlight DriveSense’s potential to enhance predictive maintenance strategies, reduce downtime, and support scalable, fleet-wide diagnostics.

Kumar, Praveen [Oak Ridge National Laboratory (ORN↗