Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “theoretical limits”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Resonant multiscalar production in the generic complex singlet model in the multi-TeV region

We develop benchmarks for resonant discalar production in the generic complex singlet scalar extension of the Standard Model (SM) with no additional symmetries, which contains two new scalars. These benchmarks maximize discalar resonant production modes at future 𝑝⁢𝑝 colliders: 𝑝⁢𝑝 → ℎ 2 → ℎ 1⁡ ℎ 1 , 𝑝⁢𝑝 → ℎ 2 → ℎ 1 ⁡ℎ 3 , and 𝑝⁢𝑝 → ℎ 2 → ℎ 3 ⁡ℎ 3 , where ℎ 1 is the observed SM-like Higgs boson and ℎ 2,3 are new scalars. The decays ℎ 2 → ℎ 1 ⁡ℎ 3 and ℎ 2 → ℎ 3 ⁡ℎ 3 may be the only way to discover ℎ 3 , leading to a discovery of two new scalars at once. Current LHC and projected future collider (HL-LHC, FCC-ee+HL-LHC, IL⁢C⁢500+HL-LHC) constraints on this model are used to produce benchmarks at the HL-LHC for ℎ 2 masses between 250 GeV and 1 TeV and a future 𝑝⁢𝑝 collider (FCC-hh) for ℎ 2 masses between 250 GeV and 12 TeV. We update the current LHC bounds on the singlet-Higgs boson mixing angle for these benchmarks. As the mass of ℎ 2 approaches the multi-TeV region, certain limiting behaviors of the maximum rates are uncovered due to theoretical constraints on the parameters. These limits, which can be derived analytically, are BR⁡(ℎ 2 → ℎ 1⁡ ℎ 1 ) → 0.25, BR⁡(ℎ 2 → ℎ 3 ⁡ℎ 3 ) → 0.5, and BR⁡(ℎ 2 → ℎ 1⁡ ℎ 3 ) → 0. It can also be shown that the maximum rates of 𝑝⁢𝑝 → ℎ 2 → ℎ 1 ⁡ℎ 1 and 𝑝⁢𝑝 → ℎ 2 → ℎ 3⁡ ℎ 3 approach the same value. Hence, all three ℎ 2 → ℎ 𝑖 ⁡ℎ 𝑗 decays are promising discovery modes for ℎ 2 masses at and below 𝒪⁡(1 TeV), while above 𝒪⁡(1 TeV) the decays ℎ 2 → ℎ 1 ⁡ℎ 1 and ℎ 2 → ℎ 3 ⁡ℎ 3 are more encouraging. We choose benchmark masses for ℎ 3 to produce a large range of decay signatures including multi-𝑏, multivector boson, and multi-SM-like Higgs production. As we will show, the behavior of the maximum rates leads to the surprising conclusion that in the multi-TeV region this model may be discovered in the Higgs quartet production mode via ℎ 2 → ℎ 3 ⁡ℎ 3 → 4⁢ℎ 1 decays before Higgs triple production is observed. The maximum di- and four Higgs production rates are similar in the multi-TeV range.

Extensions of Higgs sector↗

Component-specific electromechanical response in a ferroelectric/dielectric superlattice.

The electronic and electromechanical properties of complex oxide superlattices are closely linked to the evolution of the structure and electrical polarization of the component layers in applied electric fields. Efforts to deduce the responses of the individual components of the superlattice to applied fields have focused on theoretical approaches because of the limitations of available experimental techniques. Time-resolved x-ray microdiffraction provides a precise crystallographic probe of each component using the shift in wave vector and change in intensity of superlattice satellite reflections. We report in detail the methods to measure and analyze the x-ray diffraction patterns in applied electric field and their application to a 2-unit-cell BaTiO{sub 3}/4-unit-cell CaTiO{sub 3} superlattice. We find that the overall piezoelectric distortion is shared between the two components. Theoretical predictions of the electromechanical properties of a superlattice with the same composition constrained to tetragonal symmetry are in excellent agreement with the experiments. Lattice instability analysis, however, suggests that the low-temperature ground state could exhibit antiferrodistortive rotations of TiO{sub 6} octahedra within and/or at the interfaces of the CaTiO{sub 3} component.

36 MATERIALS SCIENCE↗

Threshold charmonium photoproduction with GlueX

Exclusive charmonium photoproduction near threshold opens the door for studying the gluonic properties of the proton: gluonic GPDs, anomalous contribution to the mass of the proton, gravitational form factors, the mass radius of the proton. However, such an ambitious program requires precise measurements to validate the theoretical assumptions that relate the experimental results to the above quantities. The first total cross-section measurements of near-threshold exclusive J/? photoproduction (?p?J/?p) by the GlueX collaboration sparked remarkable theoretical interest, however had limited statistics. We will report new total cross-section results based on more than a four-fold increase in statistics. Even more, due to the full acceptance of the GlueX experiment for this reaction, we will present first measurements of the differential cross-sections over the whole near-threshold kinematic region. Such measurements enable more general conclusions about the reaction mechanism when compared to a wide range of theoretical predictions including GPD calculations and models with open-charm intermediate states.

Pentchev, Lubomir↗

Part II - The effect of data on waste behaviour: The South African waste information system

Highlights: Black-Right-Pointing-Pointer This empirical study explores the relationship between data and resultant waste knowledge. Black-Right-Pointing-Pointer The study shows that 'Experience, Data and Theory' account for 54.1% of the variance in knowledge. Black-Right-Pointing-Pointer A strategic framework for Municipalities emerged from this study. - Abstract: Combining the process of learning and the theory of planned behaviour into a new theoretical framework provides an opportunity to explore the impact of data on waste behaviour, and consequently on waste management, in South Africa. Fitting the data to the theoretical framework shows that there are only three constructs which have a significant effect on behaviour, viz experience, knowledge, and perceived behavioural control (PBC). Knowledge has a significant influence on all three of the antecedents to behavioural intention (attitude, subjective norm and PBC). However, it is PBC, and not intention, that has the greatest influence on waste behaviour. While respondents may have an intention to act, this intention does not always manifest as actual waste behaviour, suggesting limited volitional control. The theoretical framework accounts for 53.7% of the variance in behaviour, suggesting significant external influences on behaviour not accounted for in the framework. While the theoretical model remains the same, respondents in public and private organisations represent two statistically significant sub-groups in the data set. The theoretical framework accounts for 47.8% of the variance in behaviour of respondents in public waste organisations and 57.6% of the variance in behaviour of respondents in private organisations. The results suggest that respondents in public and private waste organisations are subject to different structural forces that shape knowledge, intention, and resultant waste behaviour.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Search for new particles decaying to diject in 7 TeV proton-proton collisions at CMS

This thesis presents a measurement of the dijet invariant mass spectrum and search for new particles decaying to dijets at CMS in 7 TeV pp collisions using data corresponding to an integrated luminosity of 2.875 pb -1 . The measured dijet mass distribution is compared to QCD prediction from PYTHIA . It is required the pseudorapidity separation of the two jets to satisfy |Dh| < 1.3 with each jet inside the region of |{eta}| < 2.5. The observed dijet mass spectrum is fitted by a smooth function to search for dijet resonances. Since there is no evidence for dijet resonances, the upper limits at 95% Confidence Level (C.L.) on the resonance cross section are set. These generic cross section limits are compared with theoretical predictions for the cross section for several models of new particles: string resonances, axigluons, colorons, excited quarks, E 6 diquarks, Randall-Sundrum gravitons, W' and Z'. It is excluded at 95% C.L. string resonances in the mass range 0.50 < M(S) < 2.50 TeV, excited quarks in the mass range 0.50 < M(q*) < 1.58 TeV, axigluons and colorons in the mass ranges 0.50 < M(A) < 1.17 TeV and 1.47 < M(A) < 1.52 TeV, and E 6 diquarks in the mass ranges 0.50 < M(D) < 0.58 TeV, 0.97 < M(D) < 1.08 TeV, and 1.45 < M(D) < 1.60 TeV. These exclusions extend previously published limits on all models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A theoretical study on the performances of thermoelectric heat engine and refrigerator with two-dimensional electron reservoirs

Theoretical thermoelectric nanophysics models of low-dimensional electronic heat engine and refrigerator devices, comprising two-dimensional hot and cold reservoirs and an interconnecting filtered electron transport mechanism have been established. The models were used to numerically simulate and evaluate the thermoelectric performance and energy conversion efficiencies of these low-dimensional devices, based on three different types of electron transport momentum-dependent filters, referred to herein as k{sub x}, k{sub y}, and k{sub r} filters. Assuming the Fermi-Dirac distribution of electrons, expressions for key thermoelectric performance parameters were derived for the resonant transport processes, in which the transmission of electrons has been approximated as a Lorentzian resonance function. Optimizations were carried out and the corresponding optimized design parameters have been determined, including but not limited to the universal theoretical upper bound of the efficiency at maximum power for heat engines, and the maximum coefficient of performance for refrigerators. From the results, it was determined that k{sub r} filter delivers the best thermoelectric performance, followed by the k{sub x} filter, and then the k{sub y} filter. For refrigerators with any one of three filters, an optimum range for the full width at half maximum of the transport resonance was found to be <2k{sub B}T.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Propagation of statistical uncertainties in covariant density functional theory: Ground state observables and single-particle properties

Statistical errors in ground state observables and single-particle properties of spherical even-even nuclei and their propagation to the limits of nuclear landscape have been investigated in covariant density functional theory (CDFT) for the first time. Here, we consider only covariant energy density functionals with non-linear density dependency. Statistical errors for binding energies and neutron skins significantly increase on approaching two-neutron drip line. On the contrary, such a trend does not exist for statistical errors in charge radii and two-neutron separation energies. The absolute and relative energies of the single-particle states in the vicinity of the Fermi level are characterized by low statistical errors ($\sigma(e_i)\sim 0.1$ MeV). Statistical errors in the predictions of spin-orbit splittings are rather small. Statistical errors in physical observables are substantially smaller than related systematic uncertainties. As a result, at the present level of the development of theory, theoretical uncertainties at nuclear limits are dominated by systematic ones. Statistical errors in the description of physical observables related to the ground state and single-particle degrees of freedom are typically substantially lower in CDFT as compared with Skyrme density functional theory. The correlations between the model parameters are studied in detail. The parametric correlations are especially pronounced for the $g_2$ and $g_3$ parameters which are responsible for the density dependence of the model. The accounting of this fact potentially allows to reduce the number of free parameters of non-linear meson coupling model from six to five.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Kinetic theory for strongly coupled Coulomb systems

The calculation of dynamical properties for matter under extreme conditions is a challenging task. The popular Kubo-Greenwood model exploits elements from equilibrium density-functional theory (DFT) that allow a detailed treatment of electron correlations, but its origin is largely phenomenological; traditional kinetic theories have a more secure foundation but are limited to weak ion-electron interactions. The objective here is to show how a combination of the two evolves naturally from the short-time limit for the generator of the effective single-electron dynamics governing time correlation functions without such limitations. This provides a theoretical context for the current DFT-related approach, the Kubo-Greenwood model, while showing the nature of its corrections. The method is to calculate the short-time dynamics in the single-electron subspace for a given configuration of the ions. This differs from the usual kinetic theory approach in which an average over the ions is performed as well. In this way the effective ion-electron interaction includes strong Coulomb coupling and is shown to be determined from DFT. The correlation functions have the form of the random-phase approximation for an inhomogeneous system but with renormalized ion-electron and electron-electron potentials. The dynamic structure function, density response function, and electrical conductivity are calculated as examples. The static local field corrections in the dielectric function are identified in this way. The current analysis is limited to semiclassical electrons (quantum statistical potentials), so important quantum conditions are excluded. However, a quantization of the kinetic theory is identified for broader application while awaiting its detailed derivation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nebraska Integrated Carbon Capture and Storage Pre-Feasibility Study

In collaboration with the Nebraska Public Power District (NPPD), the Energy & Environmental Research Center (EERC) has conducted a pre-feasibility study for a commercial-scale carbon dioxide (CO 2 ) geologic storage complex in western Nebraska integrated with potential CO 2 capture at Gerald Gentleman Station (GGS). GGS is the largest coal-fired electricity-generating station in Nebraska, emitting 8.5 million metric tons (Mt) of CO 2 annually, and is located near the town of Sutherland. This pre-feasibility (Phase 1) project has been executed as part of the U.S. Department of Energy (DOE) CarbonSAFE program, a multiphase initiative to support the deployment of large-scale carbon capture and storage (CCS) projects. Each CarbonSAFE project is required to demonstrate the potential to capture and store at least 50 million tonnes (Mt) of CO 2 over a 25-year operational period. The EERC and NPPD established a coordination team to identify challenges to a potential Nebraska CCS project, comprising local stakeholder organizations, which met twice in Lincoln and via several Webinars, providing feedback and guidance throughout the pre-feasibility study. The EERC also secured the technical support of Schlumberger Carbon Services and Computer Modelling Group Ltd. (CMG). The project comprised four technical themes, all using published information sources. Regional and stakeholder analysis, including identification of sensitive environmental areas, potential resource conflicts, and strategies for public outreach. A review of geographic and socioeconomic characteristics, in combination with geologic characterization in the subbasinal analysis described below, identified an area to the southwest and within a 75-mile radius of GGS as the most prospective for development of a storage site. This area largely avoided lands with protected status such as wetlands. A public outreach plan has also been developed for implementation in any further phases of CCS assessment in western Nebraska, for example a CarbonSAFE Phase 2 feasibility study. Scenario analysis, addressing economic and regulatory factors. GGS is the only single major source of CO 2 emissions capable of satisfying the CarbonSAFE 50-Mt scale requirement within the study region. Chemical absorption using amines was identified as the most viable technology for postcombustion CO 2 capture at GGS. The total cost of a CCS project at GGS was estimated to be between $67/tonne CO 2 for capture and auxiliary boiler to minimize parasitic load and $70/tonne CO 2 avoided cost, using the Carnegie-Mellon University Integrated Environmental Control Model (IECM). The total avoided cost included the capture facility and parasitic load, a flue gas desulfurization plant required for the use of amine solvent technology, transport via pipeline, and dedicated storage infrastructure. Nebraska has no legislation in place to address typical CCS-specific issues, for example pore space ownership for storage. Long-term liability, therefore, falls under the U.S. Environmental Protection Agency Underground Injection Control (UIC) Class 6 program regulations. Subbasinal analysis, addressing the potential for a dedicated subsurface “container” to store the required 50-Mt quantity of CO 2 . Modeling and simulation studies identified an area to the southwest of GGS with the potential for storage of 50 Mt CO 2 in the Cloverly Formation, comprising sandstones with interbedded and intermingled shales. The area of review (AOR) that would be required for monitoring under a Class VI operating permit was estimated to be as high as 400–700 square miles, due to uncertain pressure effects. The viability of this storage option is subject to significant uncertainty due to the relatively limited amount of existing characterization data available to the pre-feasibility study; for example, dynamic simulation indicated that the proposed storage rate might require as little as two or as many as 14 injection wells. A key uncertainty is the relative proportion and distribution of sandstone and shale within the Cloverly Formation. A preliminary, semiquantitative risk assessment also suggested uncertainty over storage capacity and injectivity constitute the most significant project risks at this pre-feasibility stage. No assessed risks were considered to rule out the possibility of a project moving to deployment. National Risk Assessment Partnership (NRAP) validation, using software tools developed by the National Energy Technology Laboratory (NETL) to assess risks associated with the potential 50-Mt CO 2 storage complex. NRAP tools were used to assess hypothetical leakage scenarios. Results broadly supported the conclusion of the semiquantitative risk analysis – for example, even worst-case analysis of theoretical leakage scenarios found limited migration rates and impacts. In summary, the work undertaken in this Phase 1 pre-feasibility study has shown that western Nebraska has potential to host a commercial-scale CCS project, including a dedicated storage “container” for 50 Mt of CO 2 . However, the following key challenges would need to be overcome: The business case for deploying CCS projects is uncertain; recently announced federal tax credits and sales of CO 2 for enhanced oil recovery may not cover the full costs of a CCS project at GGS, as estimated by this pre-feasibility study. The potential 50-Mt CO 2 dedicated storage container defined in this pre-feasibility study should be regarded as having a relatively low level of readiness to support a CCS project. Public outreach would be a vital element in western Nebraska, where sensitivities around such environmental issues as water resource protection and pipeline construction would need to be carefully addressed.

54 ENVIRONMENTAL SCIENCES↗

Intrinsic (Trap‐Free) Transistors Based on Epitaxial Single‐Crystal Perovskites

Abstract The first experimental realization of the intrinsic (not dominated by defects) charge conduction regime in lead‐halide perovskite field‐effect transistors (FETs) is reported. The advance is enabled by: i) a new vapor‐phase epitaxy technique that results in large‐area single‐crystalline cesium lead bromide (CsPbBr 3 ) films with excellent structural and surface properties, including atomically flat surface morphology, essentially free from defects and traps at the level relevant to device operation; ii) an extensive materials analysis of these films using a variety of thin‐film and surface probes certifying the chemical and structural quality of the material; and iii) the fabrication of nearly ideal (trap‐free) FETs with characteristics superior to any reported to date. These devices allow the investigation of the intrinsic FET and (gated) Hall‐effect carrier mobilities as functions of temperature. The intrinsic mobility is found to increase on cooling from ≈30 cm 2 V −1 s −1 at room temperature to ≈250 cm 2 V −1 s −1 at 50 K, revealing a band transport limited by phonon scattering. Establishing the intrinsic (phonon‐limited) mobility provides a solid test for theoretical descriptions of carrier transport in perovskites, reveals basic limits to the technology, and points to a path for future high‐performance perovskite electronic devices.

36 MATERIALS SCIENCE↗

Addition of multiple limiting resources reduces grassland diversity

Niche dimensionality provides a general theoretical explanation for biodiversity—more niches, defined by more limiting factors, allow for more ways that species can coexist. Because plant species compete for the same set of limiting resources, theory predicts that addition of a limiting resource eliminates potential trade-offs, reducing the number of species that can coexist. Multiple nutrient limitation of plant production is common and therefore fertilization may reduce diversity by reducing the number or dimensionality of belowground limiting factors. At the same time, nutrient addition, by increasing biomass, should ultimately shift competition from belowground nutrients towards a one-dimensional competitive trade-off for light. Here we show that plant species diversity decreased when a greater number of limiting nutrients were added across 45 grassland sites from a multi-continent experimental network. The number of added nutrients predicted diversity loss, even after controlling for effects of plant biomass, and even where biomass production was not nutrient-limited. We found that elevated resource supply reduced niche dimensionality and diversity and increased both productivity and compositional turnover. Our results point to the importance of understanding dimensionality in ecological systems that are undergoing diversity loss in response to multiple global change factors.

60 APPLIED LIFE SCIENCES↗

Talbot effect beyond the paraxial limit at optical frequencies

This paper reports the experimental and theoretical investigation of the Talbot effect beyond the paraxial limit at optical frequencies. Au hole array films with periodicity 0 a comparable to the wavelength of coherent illumination λ were used to study the non-paraxial Talbot effect. Significant differences from the paraxial (classical) Talbot effect were observed. Depending on the ratio of 0 a / λ , the interference pattern in the direction perpendicular to the hole array was not necessarily periodic, and the selfimage distances deviated from the paraxial Talbot distances. Defects within the hole array film or above the film were healed in the self-images as the light propagated from the surface.

36 MATERIALS SCIENCE↗

Direct and indirect constraints on CP-violating Higgs-quark and Higgs-gluon interactions

Here we investigate direct and indirect constraints on the complete set of anomalous CP-violating Higgs couplings to quarks and gluons originating from dimension-6 operators, by studying their signatures at the LHC and in electric dipole moments (EDMs). We also show that existing uncertainties in hadronic and nuclear matrix elements have a significant impact on the interpretation of EDM experiments, and we quantify the improvements needed to fully exploit the power of EDM searches. Currently, the best bounds on the anomalous CP-violating Higgs interactions come from a combination of EDM measurements and the data from LHC Run 1. We argue that Higgs production cross section and branching ratios measurements at the LHC Run 2 will not improve the constraints significantly. But, the bounds on the couplings scale roughly linearly with EDM limits, so that future theoretical and experimental EDM developments can have a major impact in pinning down interactions of the Higgs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High precision predictions for exclusive VH production at the LHC

We present a resummation-improved prediction for pp → VH + 0 jets at the Large Hadron Collider. We focus on highly-boosted final states in the presence of jet veto to suppress the tt¯ background. In this case, conventional fixed-order calculations are plagued by the existence of large Sudakov logarithms α n s log m (p veto T /Q) for Q ~ m V + m H which lead to unreliable predictions as well as large theoretical uncertainties, and thus limit the accuracy when comparing experimental measurements to the Standard Model. In this work, we show that the resummation of Sudakov logarithms beyond the next-to-next-to-leading-log accuracy, combined with the next-to-next-to-leading order calculation, reduces the scale uncertainty and stabilizes the perturbative expansion in the region where the vector bosons carry large transverse momentum. Thus, our result improves the precision with which Higgs properties can be determined from LHC measurements using boosted Higgs techniques.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effect of High Magnetic Pulse Iteration on Electrical Property of CNT-Polypyrrole Composite: Alignment Mechanism

In this work, a pulsed magnetic field of 10 T with a duration of 1.5 ms is produced by a resistor-inductor-capacitor (RLC) discharge system. A carbon nanotube-polypyrrole (CNT-PPy) composite (9 wt%) is prepared. The influence of the pulsed magnetic field iteration on the alignment of CNTs embedded in polymer matrix is observed (up to 60 pulses). The microstructure of the magnetically aligned composites is probed by scanning probe microscopy technique. The behavior of a CNT in a magnetic field is theoretically studied, and the equivalent magnetic susceptibility for an anisotropic CNT is calculated. The theory of CNT alignment in a magnetic field is discussed. We found that the perpendicular diamagnetism of a CNT results in its alignment in a magnetic field. We showed that the magnetic torque, which is applied to a CNT, depends on the perpendicular and parallel susceptibilities of the CNT as well as on its initial orientation with respect to the magnetic direction. After exposure to magnetic pulses, the electrical property of the composites is enhanced. The results show that there is a positive correlation between the electrical conductance of CNTs and the number of applied pulses (for 30 pulses). Fourier transform infrared spectroscopy technique is used to control the polymer structure during the experiment. Our theoretical finding reveals the limited capacity of CNT’s alignment in magnetic fields.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Smart culture medium optimization for recombinant protein production: Experimental, modeling, and AI/ML-driven strategies

Recombinant protein production (RPP) is central to biotechnology, where recombinant proteins are used as either end products or catalysts in the synthesis of chemicals, fuels, and materials. Among the major cost drivers, culture medium plays a pivotal role in determining protein yield and quality. This review presents a comprehensive perspective on the critical stages of “smart” culture medium optimization: planning, screening, modeling, optimization, and validation. In the planning stage, we examine the nutritional and energetic roles of medium components, including carbon, nitrogen, amino acids, salts, and trace metals, and their impacts on culture parameters such as pH, oxidative state, and osmolality. We highlight the variability in trace metal content due to water sources, culture vessels, and raw materials, which can substantially influence RPP. The screening stage covers Design of Experiments (DoE) approaches, assessing their theoretical basis, implementation, and limitations. For modeling, we describe methods that integrate experimental data to develop predictive models for smart medium formulation. Model-based optimization strategies can then be employed to select optimal media compositions for a given application. The validation stage aims to evaluate model predictions and provide feedback for model training and refinement. Finally, we survey mechanistic and artificial intelligence/machine learning (AI/ML)-driven models as integrated, transformational tools for predictive modeling of bioprocess conditions, nutrient availability, cellular metabolism, and protein quality, with the goal of optimizing culture media to enhance protein yields while reducing costs and environmental impact. We conclude by addressing the challenges of translating laboratory-scale medium optimization to industrial-scale settings and exploring future AI/ML-driven approaches that may overcome current bottlenecks and accelerate medium design for RPP. Overall, this review provides a unified framework for advancing smart medium design in RPP.

Artificial Intelligence/Machine Learning (AI/ML)↗

Predicting combustion characteristics in externally heated micro-tubes

Here this study employs a simplified analytical model to obtain qualitative predictions of transitions between non-adiabatic combustion regimes found in non-catalytic tubular micro-flow reactors, i.e. normal stable flames, flames with repetitive extinction and ignition (FREI), and weak flames that are stabilized by wall heat transfer. Assuming large activation energy for single-step kinetics, a comparison of exact solutions for constant and variable wall temperature profiles reveals that while a non-zero wall temperature gradient introduces a temperature lag, it has no impact on the structure of the flame solution itself. This result is significant as it establishes a link to quenching characteristics within heated micro-tubes, and further facilitates a simplified micro-flow reactor analysis. Predictions for sweeps of wall temperatures are combined to S-curves, which allow for a combustion regime classification for a given combination of micro-flow reactor geometry and mixture properties. A variation of parameters such as tube diameter or mixture stoichiometry yields predictions of shifts in regime transitions, thus providing insights on interactions between heat transfer and first order effects of chemical kinetics. A comparison to experimental data illustrates that the theoretical framework, - within inherent limitations, - captures qualitatively correct trends that reflect experimental observations, thus providing valuable insights for micro-flow reactor design and operation.

42 ENGINEERING↗

Electronic and structural properties of A Al{sub 2}Se{sub 4} (A=Ag, Cu, Cd, Zn) chalcopyrite semiconductors

We have studied the structural and electronic properties of defect chalcopyrite semiconductors A Al{sub 2}Se{sub 4} (A=Ag, Cu, Cd, Zn) using density functional theory (DFT) based first principle technique within tight binding linear muffin-tin orbital (TB-LMTO) method. Our calculated structural parameters such as lattice constants a and c, tetragonal distortion ({eta}=c/2a) are in good agreement with experimental work. Anion displacement parameters, bond lengths and bulk modulus are also calculated. Our band structure calculation suggests that these compounds are direct band gap semiconductors having band gaps 2.40, 2.50, 2.46 and 2.82 eV for A Al{sub 2}Se{sub 4} (A=Ag, Cu, Cd, Zn) respectively. Calculated band gaps are in good agreement with other experimental and theoretical works within LDA limitation. We have made a quantitative estimation of the effect of p-d hybridization and structural distortion on the electronic properties. The reduction in band gap due to p-d hybridization is 19.47%, 21.29%, 0% and 0.7% for A Al{sub 2}Se{sub 4} (A=Ag, Cu, Cd, Zn) respectively. Increment of the band gap due to structural distortion is 11.62%, 2.45%, 2.92% and 9.30% in case of AgAl{sub 2}Se{sub 4}, CuAl{sub 2}Se{sub 4}, CdAl{sub 2}Se{sub 4} and ZnAl{sub 2}Se{sub 4} respectively. We have also discussed the bond nature of all four compounds. - Graphical abstract: Band structure and TDOS show the band gaps and effect of structural distortion on electronic properties. PDOS shows effect of p-d hybridization on band gaps for all four compounds. Highlights: > (Ag/Cu/Cd/Zn)Al{sub 2} Se{sub 4} have direct band gap of 2.4, 2.5, 2.46 and 2.82 eV respectively. > p-d hybridization reduces band gaps by 19.5%, 21.3% for (Ag/Cu)Al{sub 2}Se{sub 4} respectively. > No effects of? p-d hybridization on the band gaps for (Cd/Zn)Al{sub 2}Se{sub 4} and ZnAl{sub 2}Se{sub 4}. > Significant enhancement in band gap due to structural distortion in all the compounds. > Effects of bond nature on band gaps are also studied in all the compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗